My files are stored as Newborn.txt under each year's subfolder, How to implement this.
Eg: C:RaviN90Newborn.txt
C:RaviN91Newborn.txt
C:RaviN92Newborn.txt
C:RaviN93Newborn.txt
How to read the files using the for each loop container"
I'm using the FTP Task in SSIS to send files. They task succeeds but the files get uploaded to the wrong folder. Instead of being sent to the cg268301 folder they are being sent to the cg268300 despite selecting /cg268301 from the remote path field in the FTP task editor.
I've tried uploading this file to the /cg268301 file using an execute process task and it works fine. I just don't know why it won't work with the FTP task.
I have Developed ETL Package Which Supplying the CSV File, if I run the package Next time if Same File name is there I need to Rename the that File with Currentdatetime need to move in to Archive Folder. if that File is not exist in that location no need to move the file into Archive file.
View 4 Replies View RelatedI know a WMI event watcher can be used to watch for a new file being added to a folder. However, I need to check for new folders being added to an existing folder. I haven't been able to find a post on doing this. Is there a way in WQL to check for a new folder being added instead of a new file? I've used SQL for years, but am new to SSIS.
View 2 Replies View RelatedWhen creating a new integration project, the data folder to create a new data source does not load.
View 5 Replies View RelatedI am trying to change variable value at run time in ssis 2012 package using DTEXECUI utility but can not see any changes happening in config file variable value and also data is not getting populated in my table as per new variable value.
What is the right syntax or method of dynamically changing variable value either through DTEXECUI or DTEXEC command prompt command.
I need to get the record counts for all the flat files in a folder. All the flat files are having different format.
Can I get the record count using a single data flow task and for each loop container?
how do I copy a folder from an FTP location using the FTP task in SSIS. Currently, I can only move the files in the folder one after the other but I want to copy the folder at once.
View 3 Replies View Relatedhow can I copy the content of the folder (including sub folders) from FTP location using ssis.
View 4 Replies View RelatedI have 2 source folder .I have created variable for both source folder like below
User::Source1 and User::Source2
and 1 destination folder variable like below
User::Destination
Now I have to search a file from both source folder which consist of *location_*.xml string in file name.I have to use C# Script task ,achieve above scenario as I required it on very urgent basis.
I am using the below code in my command prompt and it is copying all the records from a particular table and dropping in Flat file format in particular folder location. The below code is working if I am pointing to my local database but if I need to point to different database outside my environment how should I set it here also including the case where User ID and password are required to access the db.bcp AdventureWorks.HumanResources.Department out C:myDepartment_c_t.txt -c -t, -r -T -S.
View 12 Replies View RelatedI have a package that need to copy a file from a remote server using path like ipaddresssharedfolder..now, inside of Microsoft data tools, everything runs fine, because y access to those folders on the windows sessions and enter my credentials. however how to I set up the package to use my credentials on the remote server?
Without it, I got error Executed as user: NT ServiceSQLAgent$RETAIL_PRO.and this user does not exists on remote server. so got access denied. error.
How to design ta SSIS package which loops through DESTINATION folder files and checks whether that file is there in the SOURCE or not.
If the file exists then I have to check the modified date on DESTINATION file if it is greater than 1 day delete that file. If the modified date is less than that SOURCE file then I have to copy that
file to DESTINATION<o:p></o:p>
<o:p></o:p>
If there are files which exists in SOURCE and not in DESTINATION, then how shall we copy all the files to the DESTINATION that are created on the day of execution of package.<o:p></o:p>
I have a requirement where I have to take all the data available from a sql table and write it out as a flat file in folder location.Its a simple table have 8-10 coloumns, have to take this data on daily basis from sql table and deliver out as flat file in a folder.
View 19 Replies View RelatedI have created for each container to call all the packages in a folder like below, also created a variable.
Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below link
[URL] ....
All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute.
if I have the following code:
using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Tasks.SendMailTask;
class TestSendMailTask
{
public static void Main()
{
Package pkg = new Package();
ConnectionManager smtpCM;
smtpCM = pkg.Connections.Add("SMTP");
smtpCM.Name = "SMTP Connection Manager";
smtpCM.ConnectionString = "smtphost";
Executable exe = pkg.Executables.Add("STOCKendMailTask");
TaskHost thSendMailTask = (TaskHost)exe;
{
thSendMailTask.Properties["SmtpConnection"].SetValue(thSendMailTask, "SMTP Connection Manager");
thSendMailTask.Properties["ToLine"].SetValue(thSendMailTask, "someone1@example.com");
thSendMailTask.Properties["CCLine"].SetValue(thSendMailTask, "someone2@example.com");
thSendMailTask.Properties["BCCLine"].SetValue(thSendMailTask, "someone3@example.com");
thSendMailTask.Properties["FromLine"].SetValue(thSendMailTask, "someone4@example.com");
thSendMailTask.Properties["Priority"].SetValue(thSendMailTask, MailPriority.Normal);
thSendMailTask.Properties["FileAttachments"].SetValue(thSendMailTask, "C:\test_image.jpg");
thSendMailTask.Properties["Subject"].SetValue(thSendMailTask, "Testing the SendMail Task");
thSendMailTask.Properties["MessageSourceType"].SetValue(thSendMailTask, SendMailMessageSourceType.DirectInput);
thSendMailTask.Properties["MessageSource"].SetValue(thSendMailTask, "This is only a test.");
}
DTSExecResult valResults = pkg.Validate(pkg.Connections, pkg.Variables, null, null);
if (valResults == DTSExecResult.Success)
{
pkg.Execute();
}
}
}
-------
How do I make it a workable package so it compiles , w/ javadoc style comments and instructions, so, other people can use it?
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
I have to access the remote system folder files in local machine using SSIS.
View 2 Replies View Relatedhaving on mind that this is my Target server: what is the way of creating shared folder in order to perform operation from the title (and, of course, to continue with installation of packages etc...)? SQL SERVER 2008 R2
View 26 Replies View RelatedI have a scenario where I need to convert RDF files to PDF files? may I know is this achievable in SSIS - writing C# code?
View 6 Replies View Relatedi am parameterize my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:
Argument "" for option "parameter" is not valid. The command line parameters are invalid. The step failed.
what i need to do is pass different environment here while deploying to different env.
I have an SSIS script task using c#. i need to refere an .xsd dataset in the c# code. i tried to set property below.Build action to Content or Compile Copy to output directory Copy always But still i m unable to use the dataset in my code.
View 4 Replies View RelatedOn Visual Studio 2013 with SSDT for SQL Server 2014
I noticed something very strange.
I am viewing the package configuration selected option for a package:
Now, i just click on the - sign and then on the plus sign on the "Properties" branch. And the option is cleared:
The ONLY way i found not to mess everything is just to have ALL the options FULL expanded and THEN to select what i want.
I attempted to use Move Directory to move the contents of one directory to another. I encountered the 'different volume' issue that others have experienced. While this error is frustrating I can work past this particular issue. My more pressing question is why is the move directory command overwriting a destination directory?
When I setup the Move directory file task I provided two vars to hold src and dest location:
dest var: estserveroutput
src var: devserverdev estfiles
Set overwrite destination = TRUE
Why would Move Directory overwrite output folder at destination? Shouldn't it only overwrite if the testfiles directory exists at destination? This is very frustrating since I cannot find enough information in the official documentation to understand what is happening here.
Is it just me or does the documentation for Move directory seem.....incomplete?
We have the following requirement :
1. In daily basis auto loop through each item in the invoice table.
2. passing invoice number into a Summary SSRS report as parameter.
3. Auto download ALL generated PDF reports into a window folder with a special file name format i.e. <INVOICE_NO>_<DATE>.pdf
how to achieve this via SSRS, Store Procedure or Power Shell?
I am copying files from one server to another and I have specific format for all jpg files. which is in 3 format
filename_reg.jpg,
filename_kat,
filename_pag
and I want to copy _reg files only using file system task.I have already created file sytem task using foreach loop and it is copying files but I want to copy only _reg files.
i have multiple folders in a directory and each folder contains multiple files of same extension but with different formats(columns) and names(xmp: file aand file b). We have a data task in which we are joining(merge) both files and loading into table..should i use foreach, but then it takes 1 file at a time and i need the other file also to join it in data flow.
View 4 Replies View Relatedi have csv files, it contains 5 columns.
i need to add the double quotes in all the records from start and end.
source data
col1 col2 col3 col4
1 abdul this is email it was very good ,and very relative posts.
Target data
col1 col2 col3 col4
"1" "abdul" "this is email" "it was very good, and very relative posts"
I have one folder in that i have 3 files
1) customer.txt
2) employee.txt
3) student.txt
i want to load these three files three different destinations customer file should go one destination table, employee file should go one destination table, student file should go one destination table tomorrow if i get some more files in same folder , those files also should go separate destinations these should happen dynamically.
1. SQL 2008 R2
2. Maintenance Plan -
a. Daily, Weekly, Monthly schedule
b. Full Back Up - All Database, To Disk, for every database and Disk:DirectorySubDirectory*.bak Compress backup
3. SQL Agent Job
a. Runs the Sub_Plan's at scheduled time I've allocated for each Maintenance Plan.
4. These creates Multiple .bak for all database's that list in the directory.
How can I zip them into a compressed Directory.
I have one small requirement.. I want to load the different types of files(.txt, .csv, .tsv, .xlsx).
Using one forearch loop container how can I load the files to database and I shouldn't use the script task to split the filenames. Is there any other way to load all the files using forearch loop container, exesql task..
Client uses an Amazon S3 bucket which they load flats files to . They also expect files to be delivered there to.So at the minute I have an SSIS package (SQL2012 ) which I use to generate some files but then have to manually import the files to the S3 bucket as well as export others.Now Mike Yin ( For SQL2008R2 ) mentioned that you need to obtain PostgreSQL ODBC driver so that you can use the .Net ProvidersOdbc Data Provider for ADO.NET Source component to connect to the Amazon cloud storage. After that, you can use a OLE DB Destination to load the data to SQL Server database.
Installed both 32 and 64bit 9.03. New connection Manager ADO.NET - New then drop the provider down to ODBC.Dataprovider.Then what ? Do I put the S3 bucket address within the use connection string ? Is there and example ? Why do I need the PostgreSQL ODBC as Im not connecting to a database just a S3 Bucket?
We run std 2008 r2, I need to recreate flat files from their varbinary(max) equivalents in our db. I have a mix of excel, pdf, word etc to recreate. Will ssis be a good tool for doing this? I'm wondering what transform(s) would be involved.
Perhaps I need to cast to varchar 1st and then land the data but if I recall correctly there is a maximum record length in ssis destination flat file rows. And I'm thinking I would have to map the varbinary (or cast equiv) to a row in the destination once for each file created.