Integration Services :: How To Deal With Commas In Data When Exporting To CSV File

Mar 9, 2011

I have a table that I am exporting via a SQL server table to a csv file, via the flat file connection manager within SSIS. My issue is that one of the fields in my table contains "," (commas), so when the file is created it creates new columns in the csv file because the field is "," comma delimited on the column. Is there anyway to get round this without having to get rid of commas in my table (which I've tried and works)?

View 12 Replies


ADVERTISEMENT

Integration Services :: Exporting A Table To Flat File In Folder Location

Jun 10, 2015

I am using the below code in my command prompt and it is copying all the records from a particular table and dropping in Flat file format in particular folder location. The below code is working if I am pointing to my local database but if I need to point to different database outside my environment how should I set it here also including the case where User ID and password are required to access the db.bcp AdventureWorks.HumanResources.Department out C:myDepartment_c_t.txt -c -t, -r -T -S.

View 12 Replies View Related

Integration Services :: Exporting A Table From Flat File In Folder Location

Jun 8, 2015

I have a requirement where I have to take all the data available from a sql table and write it out as a flat file in folder location.Its a simple table have 8-10 coloumns, have to take this data on daily basis from sql table and deliver out as flat file in a folder.

View 19 Replies View Related

Integration Services :: Truncation Error When Exporting Data From 2012 To Excel?

Jul 15, 2015

I need to export some data from sql server 2012 to a excel file(.xlsx). Truncation error happened when executing the exporting task, error happened in conversion from a column of type nvarchar(max) to a column of type LongText. Max length of the source column data is 4303, and documented length limit of LongText, which is a alias of type Memo, is 64,000. why this error happen?

Below is detailed error message:

- Executing (Error)

Messages

Error 0xc02020c5: Data Flow Task 1: Data conversion failed while converting column "extended_info" (59) to column "extended_info" (143).  The conversion returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".

(SQL Server Import and Export Wizard)

Error 0xc020902a: Data Flow Task 1: The "Data Conversion 0 - 0.Outputs[Data Conversion Output].Columns[extended_info]" failed because truncation occurred, and the truncation row disposition on "Data Conversion 0 - 0.Outputs[Data Conversion
Output].Columns[extended_info]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.

[code]...

View 3 Replies View Related

Integration Services :: Exporting Data From Oracle Tables Into Text Files

Feb 2, 2010

I am transferring data from Oracle tables into text files, and facing these errors.

1. I have a varaible working as an expression and my query goes into that variable and onwards that variable is passed to dataflow task, which parse the query. my query is simple saying "Select * from PLS.ABC" where PLS is my schema, but the task generates error "Opening a rowset for "Select * from PLS.ABC" failed. check that the table exists in the database. and surely the table is there.

2. I have a foreach loop that iterates through all the table names and the table names are passed onwards to the varaible query, the dataflow task inside the foreach loop gets the variable query and will generate text files based on tablenames which i have supplied in another variable to the connectionstring property of the flatfile destination. Is it possible or not. all the tables have different columns and i need the output in text files.

View 13 Replies View Related

Reporting Services :: Exporting Fixed Columns From SSRS For Use In Mainframe Data File

Jun 3, 2015

I need to be able to export a data file as flat file (.txt) with fixed columns for use by Mainframe.

I will be uploaded this file using the Windows File Share Option

Render Format does not have .txt, but does have a data feed option. So I will try that.

But, I do not see an option for fixed column width.

View 7 Replies View Related

Integration Services :: Network Path For Flat File Destination - Cannot Open Data File

Apr 6, 2015

I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me  error " cannot open data file" ...

Nothing is wrong with package.

View 10 Replies View Related

Integration Services :: Reading Data File Present In A File System From A Package Deployed In SSIS DB?

Dec 4, 2014

I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?

View 7 Replies View Related

Integration Services :: Best Way To Value Data Column In Data Pump From A Flat File

Aug 28, 2015

I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?

View 2 Replies View Related

Integration Services :: Data Load From Flat File To Database

Sep 22, 2015

I am having difficulties loading data from a flat file to a SQL Database. I am able to load some data but the rest gets kicked out for the following reasons:

1 – The field is varchar 50 and I would like to convert it to a date field
2 – The field contain periods (.) (Only 1 period in each row)
3 – The field contain blanks (NULLS)

How do I create a derived column that will bypass blanks (Nulls) and remove periods (.) in each row then convert column to a date field in SSIS? Looking for steps to create a derived date column using SSIS (derived task); convert it to a date column (09-19-2015); use functions to redirect the nulls and possibly remove the period (.)?

[b][u]Sample Data[/u][/b]
Column 3 (Varchar 50)       Need to convert to date; remove periods, and bypass nulls(blanks)                 
Blank
.
Blank
.
Blank
Blank
.
01-19-2015
01-19-2015
Blank
.
Blanlk
.
Blank
01-19-2015
.
Blank
.

View 4 Replies View Related

Is It Possible To Import Data From Plain Text File In Integration Services

Feb 21, 2008



hi,


I am new to Integration services.I have one query ,Is it possible to import the data from text file in integration services.
I know that we can import the data from excel sheet and we can export it to table.But my question is whether we can do the same thing from the text file.If anyone come acroos the same thing send u r possible answers.Your help is much appreciated.



Thanks in advance.

View 1 Replies View Related

Integration Services :: SSIS Data Type From Excel File

Jun 9, 2015

I have excel column with numeric and special character values , when I take that into SQL table using SSIS, the special character values enter as null value.  the example column values are given bellow

1
2
2/1 
1/2
1/2 means 1 or 2 ,

how can I read this values exactly into SQL table?

View 13 Replies View Related

Integration Services :: How To Load Data From CSV File To Dynamic Table

Jun 11, 2015

I have a requirement to load bulk of csv files to sql table. some times, some columns could not come in csv file(some times 100 columns and some times 80 cloumns). That time the package is getting failed. How to create a table dynamically based on csv file structure.

View 8 Replies View Related

Integration Services :: How To Load Data Without Changing Excel File (CSV Format)

Jul 14, 2015

Facing problem while loading date in MS SQL Server 2005 from excel file (csv format).

How to load the excel file data without changing the excel file (csv format) .

see the [Start Date] and [ Exp End Date] having values like this : " 2015/07/31"

View 5 Replies View Related

Integration Services :: Inserting Data Into Tables From Text File By Having Certain Condition

Nov 8, 2015

I have a text file which has rows 7 rows.I want to insert the data into SQL table using ssis In text file we have a  column which has values as Y or N...I wanted to take only those rows which are Y...But we have only 6 rows in SQL table.It does not have the column with Y or N.

View 2 Replies View Related

Integration Services :: Data Flow Task Flat File Connection

Apr 29, 2015

I have a Data Flow Task within a ForEach loop container.  The source of the flow is ADO.NET connection and the destination is a Flat File Connection.  I loop through a collection of strings in the ForEach loop.  Based on the string content, I write some data to the same destination file in each iteration overwriting the previous version. I am running into following Errors:

[Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
[Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
[SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.

I know what's happening but I don't know how to fix it.  The first time through the ForEach loop, the destination file is updated.  The second time is when this error pops up.  I think it's because the first iteration is not closing the destination file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.

View 5 Replies View Related

Integration Services :: How To Load Multiple Tables Data Into Single Excel File

Aug 26, 2015

My Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?

View 3 Replies View Related

Integration Services :: Importing Text File Into Table - Random Data Order

Aug 3, 2015

I'm importing comma-delimited text files into a SQL table. The data imports in a seemingly random order. One time I import and the lines appear one way and the next time I import they import another way.

Is there a way to force the text files to import in the same order the data is found in the file?

View 10 Replies View Related

Integration Services :: Working On SSIS To Load Data From Flat File To Server

Jun 17, 2015

I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.

View 4 Replies View Related

Integration Services :: Dataflow Task Read CSV File And Insert Data To Table

Apr 29, 2015

I've a dataflow task on For Each Loop container at control flow of SSIS package. This For Each Loop container reads the CSV files from the specified location one by one, and populates a variable with current file name. Note, the tables where I would like to push the data from each CSV file are also having the same names as CSV file names.On the dataflow task, I've Flat File component as a source, this component uses the above variable to read the data of a particular file.

Now, here my question comes, how can I move the data to destination, SQL table, using the same variable name?I've tried to setup the OLE DB destination component dynamically but it executes well only for first time. It does not change the mappings as per the columns of the second CSV file. There're around 50 CSV files, each has different set off columns in it. These files needs to be migrated to SQL tables using the optimum way.

Which is the best way to setup the Dataflow task for this requirement?Also, I cannot use Bulk insert task here as we would like to keep a log of corrupted rows.

View 10 Replies View Related

Integration Services :: SSIS OLEDB Data Source - Flat File Generation

Apr 20, 2015

I am working to archive some old data from a data warehouse using SQL server and SSIS.  The data will be read and denormalized, then shipped out to a delimited text file.

The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).

There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required.  Wondering if there are performance advantages of an embeded query for the data source instead?

It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk. 

He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.

View 4 Replies View Related

Integration Services :: Validating Data Loaded From Flat File Into Table Points

Oct 16, 2015

In my SSIS package I have flat files as a source, I have to load numbers of flat files into SQL target table. I am using For each loop container for that. I am doing it correctly. My aim is to validate the source data from all angle before writing it into target sql table. I am using below points to validate the source data , if I found any bad data I am redirecting those data to error output.

To Checking

1. To check whether data type of column.
2. To check whether buisinesskey column null.

Is there any thing which I am missing to validate source data.

Screen shot for reference

View 10 Replies View Related

Integration Services :: SSIS Split Single Input File Data Over Multiple Tables?

Sep 30, 2015

I have a delimited text file with 650+ columns. The sum of the column lengths of a single row, if fully populated, exceeds 30K bytes.  The "killer" fields lengthwise are the "Description" fields. If they were removed from the input file, the remainig columns would occupy about 5000 bytes, which is within SQL max row length. 

Can SSIS be used to created these two tables? (one without  description fields, the other with those field but arranged vertically in the table rows).

The fundamental issue is I can not import a single file row into a sql table because that row length could exceed the max byte count for a row.

View 8 Replies View Related

Integration Services :: Create SSIS Package Dynamically For Inserting Data From Flat File To Table?

Sep 30, 2015

I have requirement like  to develop dynamic package for inserting data from flat file to table.

Find below points for more clarification :--

1) if I changed the flat file values and name  in source variable AND  the table name should be also changed based on variable value .

2) it should dynamically mapped with column values with source file as we have to insert data in target table.

See below diagram for more clarification.

View 10 Replies View Related

Integration Services :: Execute Several Data-flow Tasks In Parallel And Write To Single Excel File?

Jul 2, 2015

Is it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.

View 4 Replies View Related

Integration Services :: Package Development For Pulling Data Into Excel Destination File From OLEDB Source

Sep 2, 2015

1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.

2. How to override the existing file in excel destination.

View 2 Replies View Related

Integration Services :: Handling Empty Text File Load Into Table Through SSIS Data Flow?

Jun 16, 2015

We have created SSIS package to load a text file into a table. Source system shares 10 text files and recently they stopped generating data for one of the text file (comping empty), after few months they will start generating the data for the empty file batch processing. 

The Issue here is Data Flow task is getting failed while loading empty text file into table. How to handle this empty file load issue in SSIS package.

View 3 Replies View Related

Reporting Services :: To Transform XML File While Exporting From SSRS

Oct 1, 2015

I have a requirement to transform the XML format of the SSRS report while exporting. I tried with some XSLT to implement this, but not getting desried output. Default XML format of my report is

<?xml version="1.0" encoding="utf-8"?>
<Report xsi:schemaLocation="Test http://reportserver?%2FTest&rs%3AFormat=XML&rc%3ASchema=True" Name="Test" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="Test">
<Tablix1>
<Details_Collection>
<Details Country="India" Sales="1000.0000" />
</Details_Collection>
</Tablix1>
</Report>

Output Needed (Report Tag is removed and the look and feel should be changed as below):

<?xml version="1.0" encoding="utf-8"?>
<Tablix1>
<Details_Collection>
<Details>
< Country>"India"</COuntry>
<Sales>1000.0000</Sales>
</Details>
</Details_Collection>
</Tablix1>

View 4 Replies View Related

Reporting Services :: Exporting Decimal Value 15.00 In Excel File

Jun 18, 2015

When i am exporting into excel then 15.00 value is showing me 15 value.Is there way to show the value 15.00 in excel.

View 3 Replies View Related

Integration Services :: Flat File Error File Being Created In-spite Of No Errors

Jun 23, 2015

I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file.   I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the  data from Source to Destination.

View 5 Replies View Related

Integration Services :: Renaming / Replacing Part Of A File In File System Task

May 14, 2015

I'm copying files to a folder with the naming convention as follows in the source folder:

CM_ABC_MY_TEST.txt

In the destination folder, this filename needs to appear as:

CM_XYZ_MY_TEST.txt

In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.

View 10 Replies View Related

Integration Services :: Get FileName Fo Each File Created Via Dynamic Flat File Destination

Jul 24, 2015

Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?

Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’

E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt  etc} using Foreach Loop Container  :

* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created

*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4

For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:

@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"

All this successfully creates these 4 files:

Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt

Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:

CREATE TABLE dbo.MMMAudit
  (
     AuditID      INT IDENTITY(1, 1) NOT NULL,
     PackageName     VARCHAR(100) NULL,
  
FileName           VARCHAR(100) NULL,
     LoadTime        DATETIME NULL,
     NumberofRecords INT NULL
  ) 

To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:

Execute SQL Task

Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below

SQLStatement: INSERT INTO [dbo].[MMMAudit] ( 
PackageName,NumerofRecords,LoadTime)
 (?,?.GETDATE)

Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?

AuditID PackageName FileName  NumberOfRecords
1           MMM       NULL                      12
2          MMM  NULL                23
3          MMM  NULL      14
4          MMM  NULL              1                     

View 2 Replies View Related

Integration Services :: Excel Destination With Run Date-1 Inside File Not The File Name

Aug 26, 2015

I have a ssis package where I need to have excel destination.  In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:

Data as of:  08/25/2015

if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same  Data as of:  08/25/2015. not today()-day(1).

I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of:  08/30/2015 which is not true. It should still stay Data as of:

 08/25/2015 on what ever date the excel file is open. The SSIS package  runs only once. 

How do I handle this so that whenever user open the file, they will see Data as of:  08/25/2015. This is not a column in excel. It is like a description of data in excel.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved