How to derived string to date-time (dd/mm/yyyy)
Input Date :
Start Date
15/06/2015
30/06/2015
NULL
2015/06/24
Some date are in format dd/mm/yyyy I want to keep them as it is , but I want to convert the NULL one and 2015/06/24 to 24/06/2015.
I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?
I am trying to convert a string to date in a variable. But I am not able to do so. the string format is "2015-11-24".
I am also attaching a screenshot of the error ....
I have a column value as '201303' for the date. I need to get the output into two columns as 2013 and Mar. The date column is a integer one.
How can I convert this date column in a Data Convertion task.
I am using SSIS 2012 SP1 to import a comma delimited csv file into a SQL table.
One of the fields carries a time value:
Source = textfile, column=DT_STR(8), value format = "hhmmss", e.g. "011525"
Destination = field in SQL table, data type = time(0)
To get it from the textfile to the SQL table I am:
1.) Creating a derived column called [d_Time of Entry]with the following formula -
SUBSTRING([Time of Entry],1,2) + ":" + SUBSTRING([Time of Entry],3,2) + ":" + SUBSTRING([Time of Entry],5,2)
2.) Performing a data conversion task to convert [d_Time of Entry] from DT_STR(8) to time(0) The upload fails because values that start with a zero, i.e. times before 10am, have their leading 0's stripped before being derived. You can see this because "011525" is derived as "11:52:5" when it should be "01:15:25".
I am trying to upload data from CSV to Sql table. I have a column as 'arrived_date' value '13:45' etc and while trying to load data i am getting error as "data conversion failed ,truncation may occur while loading data". In flat file connection this column datatype is string but in my table datatype is as time(). There is a error with conversion. I tried to change data type in advanced editor but no use. Using data conversion after flatfile makes my error disappear but it is giving error right at the file not even going through from file?
View 10 Replies View RelatedI am getting below errors when I try to import data from csv format to a sqlserver table.The csv file has date column that has date with format: 7/10/2015 1:18:39 PM and the sql server is using datetime not null for that field in the table.
[OLE DB Destination [90]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Invalid date format".
[OLE DB Destination [90]] Error: There was an error with input column "Date" (138) on input "OLE DB Destination Input" (103). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
View 2 Replies View RelatedHow to derived string to datetime (dd/mm/yyyy)
Input Date : Start Date
15/06/2015 30/06/2015
NULL 2015/06/24
Some date are in format dd/mm/yyyy I want to keep them as it is , but I want to convert the NULL one and 2015/06/24 to 24/06/2015. How can I do this .
I tried this :
select distinct CONVERT(VARCHAR(100),[Start Date],103) from it_projects_src
but doesnt work with "2015/06/24"
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp 12:00 AM? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp wont appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
I have the following
Column Name : [Converted Date]
Data Type : varchar(50)
When I try and do month around the [Converted Date] I get the following error message
“Msg 241, Level 16, State 1, Line 2
Conversion failed when converting date and/or time from character string.”
My Query is
SELECT
month([Created Date])
FROM [FDMS_PartnerReporting].[Staging].[Salesforce_MarketingReporting]
SELECT * ,[Due]
FROM [Events]
Where Due >= getdate() +90
This returns the error: Conversion failed when converting date and/or time from character string
Why would this be? How to cast or convert this so that it will work?
i have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
I am trying to convert Julian Date YYYYDDD format to Gregorian Date.
Able to convert using the SQL Query but not sure how to implement in SSIS.
Script:
SELECT DATEADD(yy,'2011228'/1000-1900,'2011228'-('2011228'/1000*1000)-1) AS [Date]
Let me know how to convert this function into SSIS.
I have a table in which a date value is stored as varchar.some of these values are stored ina dd/mm/yyyy format and other values are stored in a yyyy-mm-dd format..Now I wish to retrieve some data by querying between two dates. However I need to convert the varchar date value to datetime in order to do this but since the date value is in two different formats, the following doesn't work.
select date_value
from my_table
where CONVERT(DATETIME, date_value, 103) between @date1 and @date2
How can you convert the date value to datetime when its stored in mutiple formats. I can't change the table itself as I dont have admin privelages.
i have a sql statement that i created in code and it is sending a query to the database
when i dim the variable a datetime variable it says that it cant convert it
if i make the variable a varchar it works but it only returns one result when it should be returning about 10
here is the code
Public Function dbDGQSSearch(ByVal BatchID As String, ByVal CreatedBy As Integer, ByVal CreatedFor As Integer, ByVal DateCreatedMod As Integer, ByVal DateCreated As String, ByVal DateCompletedMod As Integer, ByVal DateCompleted As String, ByVal DateStartedMod As Integer, ByVal DateStarted As String, ByVal SearchType As Integer, ByVal Completed As Integer, ByVal PriorityMod As Integer, ByVal Priority As Integer, ByVal RemainingCallsMod As Integer, ByVal RemainingCalls As Integer, ByVal TotalCallsMod As Integer, ByVal TotalCalls As Integer, ByVal Bonus As Integer, ByVal Keyword1 As String, ByVal Keyword2 As String, ByVal Keyword3 As String, ByVal Keyword4 As String, ByVal Keyword5 As String)
Dim strQueSearch As String
strQueSearch = "SELECT tlkup_Rep.RepID, tlkup_Rep.PositionID, tlkup_Rep.RepFName, tlkup_Rep.RepLName, tlkup_Rep.RepPassword, tlkup_Rep.RepUserName, tlkup_Rep.RepFName + ' ' + tlkup_Rep.RepLName AS RepName, t_Que.QueID, t_Que.BatchID, t_Que.AdminID, t_Que.Manager, t_Que.BonusID, t_Que.QueCompleted, t_Que.QueDate, t_Que.QueNotes, t_Que.QuePriority, t_Que.QueQuantity, t_Que.QueStartDate, t_Que.Mail, t_Que.QueDateComplete, t_Que.QueTotal FROM t_Que INNER JOIN tlkup_Rep ON t_Que.Manager = tlkup_Rep.RepID AND t_Que.Manager = tlkup_Rep.RepID WHERE BatchID<>'' and BatchID<>'2' and BatchID<>'3' and BatchID<>'4' "
'Creates statement for selecting the add to batch data where the criteria appear
If BatchID <> "" Then
strQueSearch = strQueSearch + " and t_Que.BatchID= @BatchID "
End If
If CreatedBy > 1 Then
strQueSearch = strQueSearch + " and t_Que.RepID =@RepID "
End If
If CreatedFor > 1 Then
strQueSearch = strQueSearch + " and t_Que.Manager = @Manager "
End If
If DateCreated <> "" Then
If DateCreatedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueDate >@QueDate "
ElseIf DateCreatedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueDate <@QueDate "
ElseIf DateCreatedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueDate =@QueDate "
End If
End If
If DateCompleted <> "" Then
If DateCompletedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueDateComplete >@QueDateComplete "
ElseIf DateCompletedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueDateComplete <@QueDateComplete and t_Que.QueDateComplete >'1/1/1900' "
ElseIf DateCompletedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueDateComplete =@QueDateComplete "
End If
End If
If DateStarted <> "" Then
If DateStartedMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueStartDate >@QueStartDate "
ElseIf DateStartedMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueStartDate <@QueStartDate "
ElseIf DateStartedMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueStartDate =@QueStartDate "
End If
End If
If SearchType = 0 Then
'Both
'strQueSearch = strQueSearch + " and t_Que.Mail=0 and t_Que.Mail=1 "
ElseIf SearchType = 1 Then
'Mail
strQueSearch = strQueSearch + " and t_Que.Mail=1 "
ElseIf SearchType = 2 Then
'Phone
strQueSearch = strQueSearch + " and t_Que.Mail=0 "
End If
If Completed = 0 Then
'Both
'strQueSearch = strQueSearch + " and t_Que.Mail=0 and t_Que.Mail=1 "
ElseIf Completed = 1 Then
'Yes
strQueSearch = strQueSearch + " and t_Que.QueCompleted=1 "
ElseIf Completed = 2 Then
'No
strQueSearch = strQueSearch + " and t_Que.QueCompleted=0 "
End If
If Priority > 0 Then
If PriorityMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QuePriority >@QuePriority "
ElseIf PriorityMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QuePriority <@QuePriority "
ElseIf PriorityMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QuePriority =@QuePriority "
End If
End If
If RemainingCalls > 0 Then
If RemainingCallsMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueQuantity >@QueQuantity "
ElseIf RemainingCallsMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueQuantity <@QueQuantity "
ElseIf RemainingCallsMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueQuantity =@QueQuantity "
End If
End If
If TotalCalls > 0 Then
If TotalCallsMod = 0 Then
'>
strQueSearch = strQueSearch + " and t_Que.QueTotal >@QueTotal "
ElseIf TotalCallsMod = 1 Then
'<
strQueSearch = strQueSearch + " and t_Que.QueTotal <@QueTotal "
ElseIf TotalCallsMod = 2 Then
'=
strQueSearch = strQueSearch + " and t_Que.QueTotal =@QueTotal "
End If
End If
If Bonus > 1 Then
strQueSearch = strQueSearch + " and t_Que.BonusID =@BonusID "
End If
If Keyword1 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword1+'%' "
End If
If Keyword2 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword2+'%' "
End If
If Keyword3 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword3+'%' "
End If
If Keyword4 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword4+'%' "
End If
If Keyword5 <> "" Then
strQueSearch = strQueSearch + " and t_Que.QueNotes like '%'+@Keyword5+'%' "
End If
'makes statement into sqlcommand
C.daQueSearch.SelectCommand.CommandText = strQueSearch
'var declaration
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@BatchID", SqlDbType.VarChar, 12))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Manager", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@RepID", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueDate", SqlDbType.VarChar, 20)) '<--- This is what,when i change to datetime, says it cant convert
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueStartDate", SqlDbType.VarChar, 20))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueDateComplete", SqlDbType.VarChar, 20))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QuePriority", SqlDbType.Int))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueQuantity", SqlDbType.BigInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@QueTotal", SqlDbType.BigInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@BonusID", SqlDbType.SmallInt))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword1", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword2", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword3", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword4", SqlDbType.VarChar, 50))
C.daQueSearch.SelectCommand.Parameters.Add(New SqlParameter("@Keyword5", SqlDbType.VarChar, 50))
'data entry
C.daQueSearch.SelectCommand.Parameters("@BatchID").Value = BatchID
C.daQueSearch.SelectCommand.Parameters("@Manager").Value = CreatedBy
C.daQueSearch.SelectCommand.Parameters("@RepID").Value = CreatedFor
C.daQueSearch.SelectCommand.Parameters("@QueDate").Value = DateCreated
C.daQueSearch.SelectCommand.Parameters("@QueStartDate").Value = DateStarted
C.daQueSearch.SelectCommand.Parameters("@QueDateComplete").Value = DateCompleted
C.daQueSearch.SelectCommand.Parameters("@QuePriority").Value = Priority
C.daQueSearch.SelectCommand.Parameters("@QueQuantity").Value = RemainingCalls
C.daQueSearch.SelectCommand.Parameters("@QueTotal").Value = TotalCalls
C.daQueSearch.SelectCommand.Parameters("@BonusID").Value = Bonus
C.daQueSearch.SelectCommand.Parameters("@Keyword1").Value = Keyword1
C.daQueSearch.SelectCommand.Parameters("@Keyword2").Value = Keyword2
C.daQueSearch.SelectCommand.Parameters("@Keyword3").Value = Keyword3
C.daQueSearch.SelectCommand.Parameters("@Keyword4").Value = Keyword4
C.daQueSearch.SelectCommand.Parameters("@Keyword5").Value = Keyword5
Try
C.ndConnection.Open()
C.daQueSearch.SelectCommand.ExecuteNonQuery()
Catch ex As Exception
lblMainError1.Text = err("dbDGQSSearch " + ex.Source, ex.Message, CurUsr)
lblMainError1.Visible = True
Finally
C.ndConnection.Close()
End Try
FillQSDG()' this fills the datagrid
End Function
Hi,
Can anyone tell me how to convert date and time to string.
I got one field inside my database which contain data like below:
4/16/2004 10:19:01 AM
if i wan to call out a record which have to refer to the data above
Select *
From table_A
where field_date= ???????
what to fill in the ??????
Thanx
stupid question - how do I strip the time portion from a date returned from now() or
Globals!ExecutionTime.
I MS either used consistent date functions across all platforms or include help in BOL for their VB functions in SSRS.....
I'm trying to use SSIS in MSSQL 2012 to extract data from MAS90 database.The connection string is tested to be working, because I can extract successfully using the same one in Excel.I follow the wizard of import data in management studio, but after selecting the tables and mapping all those things, when clicking finish, the management studio always freezes.
View 6 Replies View RelatedI have a several servers that i want to pull data from.I put the connection string in a OBJECT variable that come from configuration table and use it in the for loop mapping the value to local variable called connectionstring, this variable is the expression for the connection string property.So far everything is working as expected.
my problem is that on my development i put my local server in the connection string variable so i will be able to connect to the server so i will be able to map source to destination.
When i deploy the solution to production the data in the configuration table is different obviously but i get a connection error that saying that it try to connect to my dev server.why?
In Source, we have a column of datatype string(varchar/nvarchar).
Example:
col1
True
False
In Target we need to map the column which is of type binary. Binary column accepts only 1,0.
col1
1
0
how to achieve this? can this be done in derived column?
I have string as '1-12-2012', i wanted to convert it into date as format '2012-12-01'. I used the function as cast('1-12-2012' as Date) it's working but for a set of values where Null occurs it gives error as conversion failed when casting date and/or time from character string.
View 5 Replies View RelatedMy Query is as shown below
Declare @FROMDATE DATETIME
Declare @THRUDATE DATETIME
Declare @Parm Varchar(250)
set @FROMDATE = '09/25/2013'
set @THRUDATE = '09/28/2013'
set @Parm = 'FROMDATE=' + @FROMDATE + ';THRUDATE=' + @THRUDATE
I am getting an error at above line saying that
Conversion failed when converting date and/or time from character string.
I am using OLE DB source to extract data from Oracle. I have query (sample) like below, but SSIS is converting ID as Unicode String [DT_WSTR]. Why is that? and how to avoid this?
SELECT
1 AS ID
FROM
ORACLE_TABLE
I am using derived column to convert string data to datetime .My string data :
Start Date
15/06/2015
30/06/2015
NULL
2015/06/24
I wrote in derived column expression:
(DT_DATE)(SUBSTRING(([Start Date]),7,2) + "/" + SUBSTRING(([Start Date]),5,2) + "/" + SUBSTRING(([Start Date]),1,4))
which is giving error :
[Derived Column 1 [5452]] Error: The "component "Derived Column 1" (5452)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "Start Date" (5650)" specifies failure on error. An error occurred on the specified object of the specified component.
How to write the expression in derived column to handle null value as well.
I am reading a data source where all data in a given column is held as a string containing a percent value with 2 decimal points:
03.52%
12.32%
92.10%
80.05%
27.92%
100.00%
[...]
etc...
I need to convert these into decimal values with up to four decimal points, like this:
0.352
0.1232
0.9210
0.8005
0.2792
1.0000
I am trying to use the derived column editor but since I am fairly new to this, I am getting my wires crossed. c
1. Remove the % sign from the string -- not sure if I should use TRIM, or REPLACE
2. Divide the value by 100 -- but don't I need to do some sort of type casting first?
3. Do a cast to convert whatever I got into the correct decimals -- perhaps this isn't required if I did step 2 as a typecast to decimals already?
How can i perform this task with ssis OR TRANSACT SQL? I HAVE THESE ROWS WITH THE NEXT DATA, I want to take just the valid one, BUT I HAVE A LOT OF COMBINATIONS AS following names, it can be animals, things or personal names
GABRIEL OBANDO --CORRECT
GABRIEL OVANDO
Gavriel OVANDO
gAbriel OBANDO
GABRIE OBANDO
Gabri OBONDA
MANAGUA --CORRECT
NANAGUA
NAMAGUA
Im working with a breaking system and I wont to convert the (FROM) datetime column to accept just time like (4:00:00 AM) without the date (7/23/2004) but it doesn’t have column format like the access ??
I found something in the SQL help :
How to convert the format of a Date Time String transformation (Enterprise Manager)
To convert the format of a Date Time String transformation
1.On the Transformations tab of the Transform Data Task Properties or Data Driven Query Task Properties dialog box, click the Source column containing the date or time to be modified, and then click the Destination column where you want the modified string to be placed.
2.Do one of the following:
•If there is a mapping arrow connecting the two columns, click Delete, and then click New.
•If there is no mapping arrow, click New.
3.In the Create New Transformation dialog box, click DateTime String.
4.Click the General tab, and then click Properties.
5.In the Date Format list, select the format you want.
6.Click Naming to display the Calendar Names dialog box, where you can select long or short day or month names and the A.M. and P.M. designators you want.
7.In the Language list, select the language you want, and then click Set Language Defaults.
But unfortunately I didn't find the "Transformations tab" I look a lot in the SQL Enterprise Manager
Do anybody work with the Transformations or at least know where is it please ???
If we want to compare datetime vs a specific time what should we do?
i.e. startdatetime specific time
2015-10-12 00:03:19:020 16:23:00
I want to compare just time in startdatetime coloum vs a specific time i.e. 16:23 .
I convert startdatetime to (DT_DBTIME) after that i want to calculate just time difference. how can i do it?
i.e i want to calculate this two (DT_DBTIME) columns without any date ==> (16:23:00)-(00:03:19)
I have my SSIS package that reads elements from a Sharepoint list to a SQL table. The data type of my source is string and the destination is integer. The source column can sometimes be an empty string "" (not a required column)
Which expression to use and "where" or "what" SSIS component can I add this expression to? Like I know that I can use the "Conditional Split" to filter the data so for my expression which component can I use?
Having trouble casting GETDATE() to a string value (DT_STR) using expression builder? I want to concatenate the current date to some text used in a send mail task.
View 5 Replies View RelatedThe below connection string works fine for windows authentication.
Data Source=Test123;Initial Catalog=Globe;Provider=SQLNCLI10.1;Integrated Security=SSPI;
what changes i should make in the above connection if i have sql server authentication mode?
In my source table, I have columns FirstName and LastName, both of datatype nvarchar. In my dataflow, I created two new derived columns mapped to these two columns. When pushing data to the source, I noticed that the FirstName column had a value of NULL while LastName was just an empty string (for rows that did not have any value).
My question is, why my source table column FirstName is showing a NULL value when the derived column datatype is string and the source is string? It should just be showing an empty string right?