How do I pass a single column of values from a successful merge join to an EXECUTE SQL statement so it can be used with an "IN" criteria of the WHERE clause? Here's an example of my update statement with two random key values:
UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK IN ("XYZ123", "DEF890")
Is this even possible in SSIS, or am I better off using a loop and running the update EXECUTE SQL Statement for each individual key value, as in the following example?
UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK = "XYZ123" UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK = "DEF890"
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
Using Task SQL, I am trying to pass these email addresses to two separate variables - To_field, Cc_field on basis of the CC_Flag..Is it possible to fill two variables from a single SQl Task,.
I set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned).But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. " I tried to change the type of variable around but with no luck.
I have table called email_address and have all the email ids in this table. using sql task, I am getting the ids and passing to string. This string variable is passed to the to field using expression.Since it is a string only the first email id is set in the to field and the rest is ignored. Can you tell me a way to parameterize all the email ids to the to field in this case.Email ids from Table -> To field..I would like to put all the email ids in the to fields at once and send only a single email!
I have created an SSIS package which processes daily financial information to a sql server database. These processes are to be outputted to excel spreadsheets to a readable report format for management to review. Some of these reports are laid out in a way that is not just tabular output but requires customized placement of data on an excel spreadsheet to specific cells.
I am able to place an initial resultset of a query output from the database in a tabular excel template through SSIS but the issue is at the end of that placement in the spreadsheet I am required to place another output below that tabular output in a different format from the initial output which I have shown below.
My Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
I have a delimited text file with 650+ columns. The sum of the column lengths of a single row, if fully populated, exceeds 30K bytes. The "killer" fields lengthwise are the "Description" fields. If they were removed from the input file, the remainig columns would occupy about 5000 bytes, which is within SQL max row length.
Can SSIS be used to created these two tables? (one without description fields, the other with those field but arranged vertically in the table rows).
The fundamental issue is I can not import a single file row into a sql table because that row length could exceed the max byte count for a row.
I came across the below scenario in SSIS where the values are not getting rounded off in SSIS as expected.
I am passing the value 23007.945 and using a derived column expression to round off the value Round(number,2).
Placed a dataviewer to view the outcome after the derived column expression.Value after derived column expression seems to be 23007.94 but the same when passed in SQL select round(23007.945,2) gives us the value as 23007.95.
I have both positive and negative values in a single column, where I want sum total of positive values & negative values. Is there any Expression for this to sort out.
Send Mail has priority values as Normal, Low and High. How do I translate this to integer values? I am creating a custom Send Mail script and would like to assign the email priority.
At one of my accounts I'm using SQL 2008r2 and SSIS in an DWH solution. Today I wanted to created a dynamic sql statement in one of the packages. The dynamic part is in the where-clause a sql query I use. I want to set the values for this clause dynamically. Therefor I created a user variable (named 'Filter') which should get it´s value at run-time.
/DTS "MSDBProdMy Package" /SERVER "My-Server" /CHECKPOINTING OFF /REPORTING EW /SET "Package.Variables[User::Filter].Properties[Expression]";" where [Starting Date] < '2008-09-01 00:00:00.000' "
However when I execute this package with dtexecui it doesn not use the value specified after the /SET parameter, but instead uses the value specifiied at design time. I get the same when I add the execution of ths pacakage as a sql server job step (type SSIS). I would expect that value specified after the /SET parameter would overwrite the valus specified at design time, but I don't see that happening.
I have developed an SSIS package which extracts and creates 5 flat files and finally using Process Extraction task zip the folder. On my Dev environment everything is working fine but when I am moving to SIT and UAT, not able to set up jobs dynamically by importing XMLConfig file.I created variables and assigned values but still it doesnt take.Below are varaibles I created for flat file destination, Arguments and Working Directory (for zipping)On UAT when I go to SQLAgentJobs to set, import .dtsx file, XML config file....the new values doesnt appear. why ?DataSource is taking always dev location....why ? How can I set it up to take dynamic values what I mentioned in config file ?
I was to split each record into multiple columns. The problem is some records need to be split into only 1 column, others may need to be split into more. Also need to remove the "/"'s. This is all dependent on where a "/" is found. Been beating my head for a while and getting nowhere.
So:
create table #foo (myPK int, c1 nvarchar(425)) insert into #foo values (1,'/folder1') insert into #foo values (2,'/lvl1/folder2') insert into #foo values (3,'/folder1/lvl2/folder3') insert into #foo values (4,'/f1/folder2/lvl3/fldr4')
I am trying to insert in table using execute sql task.
I want to pass value of Load_Frequency through parameter
But I am getting below error
[Execute SQL Task] Error: Executing the query "Insert Into [dbo].[ETL_LOAD_MAIN] ( [Load_Fr..." failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Insert Into [dbo].[ETL_LOAD_MAIN] ( [Load_Frequency] ,[Load_Start_DateTime] ,[Load_Overall_Status] ) Values (?,getdate(),'In Progress')
I have a table with 3000 values and What I need to do is place a full set of these values for every date in the year 2015. How to achieve this through SSIS?I know we can achieve through SQL using while loop.
EG: 1-1-2015 a b c d 1-2-2015 a b c d like wise 12-31-2015 a b c d .
I have a object variable named "UserList" which gets populated through execute sql task - stored procedure.I wish to concatenate all the values in "UserList" using ssis script task - in lang vb.Output should be like (User1,User2,User3,....)
I'm trying to import some XLS files that I receive from some suppliers. The problem is that every time they send some columns with text values but formatted as number. When I read those columns with SSIS Excel Source, they come all with null values.
I don't want to change the columns data types every time, so I would like to know if there's a way to bypass the column types that are already there.
I tried to use both the Jet driver and the Office 12 driver. I've already used the IMEX=1 on ExtendedProperties too with no success. Is there a way to force reading the columns as text, even if they have data types assigned to them?
I am writing my first custom SSIS task and I can see that, if I put a public property into the task, I see that property in the standard Properties window. If I add a property of type String, I can put a value in that property, in the task code, and when I instantiate the task in a package, I can see the value I entered.
To try and get a drop down list property in the Properties window, I declared a property of type Combobox, and indeed a drop down list appears in that property.
My problem is trying to get values in that property. I have used the test items:
I'm using SSIS 2005 Enterprise edition, I'm creating a package that reads an excel (xls) file using the "excel source" component, and it dumps the data into an OLEDB destination (a sql server). When I drag the excel source component and create the excel connection to my file the component automatically reads the columns and their datatypes.
The problem is that I have a column which has numeric data and the package uploads as NULL every number that starts with a zero. (note: in excel this column is formatted as "text", despite it has only numbers, because it's the only way excel maintains the left sided zeros).
So I checked the data types by right clicking the excel source component -> show advanced editor and my surprise is that this column's data type is detected as double-precision float, and it doesn't let me change it. URL... but it only works when the first row of data has a number beginning with zero on this column. How to get the data imported correctly?
we can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??) 2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
I have an excel sheet containing one column (ID_NO) with 400K rows. I have a database from where I have to fetch some other columns from a Netezza database. Initially I tried hardcoding all the 400K rows in the query that I wrote using filter WHERE ID IN ('1212','2334'). But after pasting all the 400K rows the query is running indefinitely.
I have imported all the ID in a SQL table (MY_LIST table). I used a DFT, and selected ODBC source, and selected my netezza server. Then in the 'Data access mode' I selected the SQL command from the dropdown.I pasted the same query that I wrote in Netezza. Is there any way to pull only for those records that I have pulled in my SQL table (MY_LIST) ?
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?
