How to use T-SQL to get parameters information within the job steps?
the result i like is :
stepNum, StepName, ParameterName, ParameterValue
1 ,stepname1, intParameter1
,1
1 ,stepname1, strParameter2
,"aaa"
2 ,stepname2, xxxx,
,xxx
Unpivoting of Sales table. My original table is as picture below and the result I must is at the bottom.
View 3 Replies View RelatedWhen i use single object variable to pass it to two sequence container having 2 different Foreach ADO Enumerator; seems like the scope of the variable is completed once sequence container 1 is done and second fails with below error
Foreach ADO Enumerator
Error: COM error object information is available. Source: "ADODB.Recordset" error code: 0x800A0BCD Description: "Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.".
Does we have to set any property so that object variable scope persist until both loops are completed.
It works fine if i push the data to 2 different object variables.
I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get
TITLE: Microsoft Visual Studio
------------------------------
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.
The columns are there in the preview - why can't SSIS get the column information?
We have table where we want to populate the fields from Active Directory using Script Task in ssis 2008 .
CREATE TABLE [ZPTSMGR].[ActiveDirectoryRaw](
[Id] [int] IDENTITY(1,1) NOT NULL,
[LoginName] [nvarchar](50) NULL,
[LastName] [nvarchar](100) NULL,
[MiddleName] [nvarchar](50) NULL,
[FirstName] [nvarchar](100) NULL,
[code]...
Problem: I need to export data from a table in a database. I have an SSIS that converts data to this table. To export the data using the SSIS the file needs to be already created (from my understanding). This export location is on another server and the folder location is empty.
Question: How do I create an empty CSV file at this location using either a Script Task, SQL Query, or Space Magic? I have been searching all over for about 4 hours now to no avail.
If we want to compare datetime vs a specific time what should we do?
i.e. startdatetime specific time
2015-10-12 00:03:19:020 16:23:00
I want to compare just time in startdatetime coloum vs a specific time i.e. 16:23 .
I convert startdatetime to (DT_DBTIME) after that i want to calculate just time difference. how can i do it?
i.e i want to calculate this two (DT_DBTIME) columns without any date ==> (16:23:00)-(00:03:19)
I have outlook 2013 installed on my machine, I want to automate the download of an attachment which I receive on daily basis from noreply@test.com. I have created a rule in outlook to reroute these mails in a specific folder named Received_Test.Many who try to climb it fail and never get to try again. The fall breaks them.
View 3 Replies View RelatedI've developed a package that is working well at development machine from VS 2013 for a sample flat file. Also, over development machine, I've deployed it to SSISDB catalogue and even from there also it is running well for the same file.When the same package is deployed to production server's SSISDB catalogue database, it throws following error while processing the same sample flat file, “Unable to retrieve column information from the flat file connection manager”
View 5 Replies View RelatedI am downloading a webpage as a text file in order to read a specific string to assign it as a variable/parameter in order to create an output file name. I would like to know how would I be able to look for a specific string and output as another variable for the rest of the package.
2015 Conforming Loan Limits
------------------------------------------------------------------------
o _Loan Limits for Calendar Year 2015--All Counties _[XLS]
</DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL_FLAT.xlsx>_ ,
_[PDF]
</DataTools/Downloads/Documents/Conforming-Loan-Limits/FullCountyLoanLimitList2015_HERA-BASED_FINAL.pdf>_
o _List of 46 Counties with Increases in Loan Limits for 2015
[Code] ...
To explain it a more better way, I have a sample webpage text here. I should be searching for "FullCountyLoanLimitList" appended by the current year (like FullCountyLoanLimitList2015) and copy the entire file name in the text file and assign it to another variable so that I can download that specific file using WebClient connection.
I am trying to setup a process in which a user, who is using a vb.net 2008 application, will need to trigger the creation of two items. The first is SSRS report which will need to be exported to PDF format to a shared folder on the network.
This report accepts one parameter. The second thing that will need to be created at the same time is an excel file with data exported from SQL Server 2008 which is generated through an SSIS package. A couple things to note. The excel file and the pdf file need to have the same file name, other than the extension.
For example P00000001_20100831.pdf and P00000001_20100831.xlsx and will both be stored in the same network share. The filenames need to be created dynamically at run time and will be based on a parameter being passed to the report.
So far I have the portion that creates the excel file working fine. The way I create that is as follows. I have a stored procedure that creates a job which calls the SSIS package and passes the appropriate parameters to the SSIS package.
After the job is created I immediately run it and then delete the job. Ok, everything works fine with that.
Now I cant seem to figure out how to get the pdf created. If possible I would like to keep this portion together with the already created job or package. I am running SQL Server 2008 standard so the data driven subs are out. I have thought about create a time subscription and then just using a SQL task in the package to execute the subscription but couldnt figure out how to pass the parameter to the report and create the filename.
I am using SSIS 2008 and I am trying to remove all parameters from my Connection manager so that the package will execute without errors. How do I do this?
View 2 Replies View RelatedI'm after running into something in SSIS 2012 that I fail to grasp.
I have a package that provides a service to other packages. In order to provide that service it needs 4 parameters provided by the caller. So naturally I'm thinking I make those 4 parameters 'required'.
The caller uses Execute package task and provides the 4 parameters on the parameter mapping tab.
Yet the packages fails with the error message that one or more required parameters weren't provided.
I am querying OSI PI data using PI OLEDB source transformation in SSIS. When i write a simple query, data is coming. My requirement is to pass parameter to pull data from PI. When i do it the usual way of passing parameters, i get the following error:
"OLE DB Source failed the pre-execute phase and returned error code 0xC0202009"
This is my source query.
SELECT tag, time, value FROM PIAVG WHERE SUBSTR(tag,1,9) =? AND time > '20-Oct-15' and TIME <'29-OCT-15' AND TIMESTEP='1H'
where i am assigning a User::variable for the ?
I have a requirement to read an encrypted file as a data source. I am not allowed to save an unencrypted text file version on disc at any time for any length of time, therefore I created a custom source component that reads an encrypted csv file, decrypts it, and then passes each row of data to the pipeline and ultimately to an ole data destination. Basically it is just a text file reader with an added class that adds functionality that decrypts the file before the component sets columns or reads rows.
The custom component, “Encrypted File Source”, has a custom property “encryptionkey” with the encryption required flag set to true (code below) and is declared as eligible to be set in the expressions.
IDTSCustomProperty100 EncryptionKey = ComponentMetaData.CustomPropertyCollection.New();
EncryptionKey.Name =
"EncryptionKey";
EncryptionKey.Description =
"Secure String key value to decrypt the file";
EncryptionKey.Value =
string.Empty;
EncryptionKey.ExpressionType =
DTSCustomPropertyExpressionType.CPET_NOTIFY;
EncryptionKey.EncryptionRequired =
true;
I want to be able to set the password for the encrypted file in the SQL Agent job that executes the SSIS project. This means I have an environment with a variable, “DataPassword”, that is set to sensitive. It maps to a Project parameter in the SQL Agent job that is also set to sensitive. And I now I want to access that sensitive Project Password inside my data flow, specifically in the Encrypted File source task that I created and set my EncryptionKey to that Project Parameter.
The problem is that SSIS says.
"expression cannot be evaluated. ... The Expression will not be evaluated because it contains sensitive parameter value "$Project::DataFilePassord" . Verify that the expression is used properly and that it portects sensitive information"
((Microsoft.DataTransformationsServices.Controls) "<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75"
path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
[Code] ....
I am using SQL Server 2012, on a windows 7 box with VS2010 premium.
Got a powershell script to split a large XML file to split in smaller chunks. I have Execute ProcessTask in SSIS with:
Executable: %windir%system32WindowsPowerShellv1.0powershell.exe
argument: -ExecutionPolicy ByPass -command ". 'C:WorkspacesSplitToytPMFile.ps1'"
I need to pass File Name as parameter to the PS script. I tried using the StandardInputVariable but it doesn't work.
I need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedI have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies View RelatedThere is one SP with parameters varchar, int, varchar and int. It runs perfect in SSMS. Now, I've moved into a Execute SQL task with four IN parameters. In parameter mapping, data type is varchar, long, varchar, long and parameter name is 0,1,2,3. It worked before which is great. Today, I opened this pkg for another testing but failed with the following error:failed with the following error: "Incorrect syntax near ';'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,parameters not set correctly, or connection not established correctly.
I know SP is fine as tested in SSMS. I could not understand where it could go wrong in the ssis package. Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
i am parameterize my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:
Argument "" for option "parameter" is not valid. The command line parameters are invalid. The step failed.
what i need to do is pass different environment here while deploying to different env.
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
I am currently working on a website that deals with sales of products. For one of my pages for the website I need it to be able to change the current sales information for a specific product.
The top part of the following code selects the specific product however I cannot get the update query to work.
Code:
$describeQuery = "SELECT p.ID, p.NAME, dt.[Year], dt.[Month], dt.SalesVolume FROM Products p
join
(select ProductCode, sum(SalesVolume) as SalesVolume, [Year], [Month] from MonthlySales
group by ProductCode, [Year], [Month])dt
on dt.ProductCode = p.ID WHERE [NAME] = '$desiredProduct' AND [Year] = '$desiredYear' AND [Month] = '$desiredMonth'";
$editQuery = "UPDATE MonthlySales SET SalesVolume = '$NewSales' WHERE ID = '$desiredProduct' AND Year = '$desiredYear' AND Month = '$desiredMonth'";
$query = sqlsrv_query($link, $describeQuery);
I need to know the steps on how to configure the SSRS Forms Authentication and its IIS Configuration. What specific Config Files should be modified?
i am using IIS 6.0, Windows Server 2003, SQL Server 2005.
Please help....
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
Hi,
I have two job J1 and J2, each one has 10 steps. Now I want J2 to be the 11th step of J1 and I did not want manually type all the steps of J2 to be 11-20 step of J2. Is there an easy way through TSQL to do this ?
sp_add_jobstep only works when the step is OS command or a script but not a job
How do you install Internet Information Services 6.0 on a individual workstation. I posted this before and someone replied, but I can't find the thread. When I logged it, I was told it was deleted. Anyway, I am trying to download a software that will allow the PDA to sync to Legrand CRM. One of the system requirements is to download IIS 6.0. How and where do I do this. It is on one computer workstation. Thanks!
View 1 Replies View RelatedHas anyone ever worked with the Reporting Services Device Information Settings (Render or HTML method) If so, were do I begin. I have read all of the articles and have xml examples but I don't know where to start?
Do I make the change in SSRS?
Do I make the change on the field that I want to alter?
Do I make the change on the report header properties?
What is the first step?
I want to change the excel device info parameter settings simplepageheaders = true. How would I go about doing this?
fsugeiger
Hi,
I developed a report in development environment, which will later be deployed to QA, Staging and then Production. This report has more than 10 datasets and if the report is moved through each of the databases, datasource has to be changed for all the datasets. is there anyway that I can do it globally, what i mean is can i set up any configuration files which I can use in QA, Staging and Production.
Any ideas
Thanks,
Priya T
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
My requirement for the parameter is multivalue parameter with a text box. for example when user enters aa15 it need to include product aa15. when the user enters aa15, aa16, zz15 than it needs to include all the three products. the last case is when the user enters AA** than i need to inclued all the products start with AA. when i use default multivalue parameter with data source analytical services than i am getting a drop down box. I dont want that. I need a text box where user can enter the value.
1. In sql we have a like key word to query . for example select * from product where product like "AA%".
what is equavalent mdx query to get such results ?
2.How to impliment the multivalue parameters without using dropdown box?
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
What is the difference between CleanExpiredCache and FlushReportFromCache Do we need to run both the SPs to clear all the SSRS reporting cache? Is it possible to clean all the Cache information and retain the logs? If yes how we can do so. Is it by deleting the REportServerTempDB.dbo.ExecutionCache table work in achieving this?
View 8 Replies View Related