Data flow A take data from the Excel File A, Data B from Excel File B, Data C from Excel File C. What I'd like to do is that if something goes wrong on Data Flow A I would be alerted but the package should continue to running. The same for the DataFlow B, if A it's ok go on, if B fail send me the mail but continue until the end (so running the Data Flow C).
View 2 RepliesHi, all here,
Thank you very much for your kind attention.
I am wondering if it is possible to use SSIS to sample data set to training set and test set directly to my data mining models without saving them somewhere as occupying too much space? Really need guidance for that.
Thank you very much in advance for any help.
With best regards,
Yours sincerely,
when executing my data flow package that contains only one source and one destination
OLE db source -> SQL server destination
the following errors occurs in my output
Error: 0xC0202009 at Data Flow Task(infraction action), SQL Server Destination [3600]: An OLE DB error has occurred. Error code: 0x80040E14.
Error: 0xC0202071 at Data Flow Task(infraction action), SQL Server Destination [3600]: Unable to prepare the SSIS bulk insert for data insertion.
Error: 0xC004701A at Data Flow Task(infraction action), DTS.Pipeline: component "SQL Server Destination" (3600) failed the pre-execute phase and returned error code 0xC0202071.
i've checked the structure of my source and destination table but nothing seems to be wrong
if someone have ever faced these errors help me :D
I'm a beginner in ssis. Use of Pointer in Data Flow task (Transformations)Royal PS
View 11 Replies View RelatedWe are using an OLE DB Source for the Data Flow Source and OLE DB Destination for the Data Flow Destination. The amount of data being moved is about 30 million rows, and it is gather using a sql command. There is not other transformations in between straight from one to another. The flow starts amazingly fast but after 5 million rows it slows considerably. Wondered if anyone has experienced anything similar with large loads.
View 6 Replies View RelatedI have a requirement to read an encrypted file as a data source. I am not allowed to save an unencrypted text file version on disc at any time for any length of time, therefore I created a custom source component that reads an encrypted csv file, decrypts it, and then passes each row of data to the pipeline and ultimately to an ole data destination. Basically it is just a text file reader with an added class that adds functionality that decrypts the file before the component sets columns or reads rows.
The custom component, “Encrypted File Source”, has a custom property “encryptionkey” with the encryption required flag set to true (code below) and is declared as eligible to be set in the expressions.
IDTSCustomProperty100 EncryptionKey = ComponentMetaData.CustomPropertyCollection.New();
EncryptionKey.Name =
"EncryptionKey";
EncryptionKey.Description =
"Secure String key value to decrypt the file";
EncryptionKey.Value =
string.Empty;
EncryptionKey.ExpressionType =
DTSCustomPropertyExpressionType.CPET_NOTIFY;
EncryptionKey.EncryptionRequired =
true;
I want to be able to set the password for the encrypted file in the SQL Agent job that executes the SSIS project. This means I have an environment with a variable, “DataPassword”, that is set to sensitive. It maps to a Project parameter in the SQL Agent job that is also set to sensitive. And I now I want to access that sensitive Project Password inside my data flow, specifically in the Encrypted File source task that I created and set my EncryptionKey to that Project Parameter.
The problem is that SSIS says.
"expression cannot be evaluated. ... The Expression will not be evaluated because it contains sensitive parameter value "$Project::DataFilePassord" . Verify that the expression is used properly and that it portects sensitive information"
((Microsoft.DataTransformationsServices.Controls) "<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75"
path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
[Code] ....
I am using SQL Server 2012, on a windows 7 box with VS2010 premium.
In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
I have a Data Flow Task within a ForEach loop container. The source of the flow is ADO.NET connection and the destination is a Flat File Connection. I loop through a collection of strings in the ForEach loop. Based on the string content, I write some data to the same destination file in each iteration overwriting the previous version. I am running into following Errors:
[Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
[Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
[SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
I know what's happening but I don't know how to fix it. The first time through the ForEach loop, the destination file is updated. The second time is when this error pops up. I think it's because the first iteration is not closing the destination file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.
I am using the SharePoint adapters from Codeplex that allow me to use SharePoint source and destination tasks in SSIS for SQL Server 2008 and SharePoint 2010. I am able to pull the data from the SQL Server and insert it into the SharePoint List.
However, I prefer to just have fresh data every time, so I'd like to add a step to delete all the items in the list before inserting the new ones. Is there a way I can configure the SharePoint SSIS destination task to clear all the items before I insert new ones?
Using SSIS 2012 (within Visual Studio) on Windows 7.
Before allowing my Data Flow task to fire, I'd like to check the target table (OLE DB Destination) for a specific date value in a specific field. I've seen how the Lookup Task is commonly used to check for dupes before inserting, but I'm not able to use that method because the data value I want to search the table for is contained in a Global Variable (let's say "MyVariableDate").
Is there any way to check for any records in a target table where Date1 = MyVariableDate (i.e. scanning the entire table for any occurrence of MyVariableDate in the Date1 field)?
Suppose if I have a “Foreach Loop Container” that iterates over a list. Is it possible to execute different data flow tasks based on the input?
Example : List contains elements L1, L2 & L3.
ForEach Loop Container checks the input. If its L1 then it should execute DF Task1, If L2 then execute
DF Task2 and similarly for L3.
Is it possible to achieve this?
I have created an event that contains a Data flow tasks with OLE DB source & Excel Destination.
This event is executed/triggered based on an execute SQL task failure in the control flow Sequence container.
However, when I execute the Data Flow task of the Event Handler, it runs successfully but fails when I execute the whole package.
I get the below error message:
[OLE DB Source [21]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "TK463DW" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have tried setting the property 'DelayValidation' to 'True' on all the Control Flow and Data Flow tasks on the package and on the Event Handler, but still I could not fix this.Not sure What I am missing.
I recently upgraded to on 2012 SP1 CU5 and have found the SSDT gui for SSIS to be almost unusable. I can't drag or resize items. Any time i try they either automagically shrink to the tiniest possible size, shoot off to some extreme or just shake uncontrollably I didn't have these problems on previous versions (dont remember what It was).
Is there a fix for this?
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
View 3 Replies View RelatedWe have a single generic SSIS package that is used to import several hundred iSeries tables into SQL. I am not looking to rewrite the process. But I am looking for ways to improve performance.
I have tried retain same connection, maximum insert commit size, lock table (tablock), removed some large columns, played with the log file location and size, and now I am working to tweak the defaultbuffermaxrows.
To describe the data flow task - there are six data flows tasks (dft) working at the same time. Each dtf has their own list of iSeries tables and columns and the corresponding generic SQL table names. Each dtf determines their list of tables based on the number of columns to import. So there is dft30 (iSeries table has 1-30 columns to import), dtf60 (iSeries table has 31-60 columns to import), etc. The destination SQL tables are generically called Staging30, Staging60, etc. Each column in the generic Staging tables are varchar(100). The dtfs are comprised of an OLE DB Source and an OLE DB Destination.
The OLE DB Source uses a SQL Command from Variable to build a SELECT statement. The OLE DB Source uses a connection manager that uses an IBM iAccess IBMDA400 provider. The SQL Command ends up looking like this for the dtf30. This specific example is importing from the iSeries table TDACLR and it only has two columns so it will be copied to the Staging30 table.
select TCREAS AS C1,TCDESC AS C2,0 AS C3,0 AS C4,0 AS C5,0 AS C6,0 AS C7,0 AS C8,0 AS C9,0 AS C10,0 AS C11,0 AS C12,0 AS C13,0 AS C14,0 AS C15,0 AS C16,0 AS C17,0 AS C18,0 AS C19,0 AS C20,0 AS C21,0 AS C22,0 AS C23,0 AS C24,0 AS C25,0 AS C26,0 AS C27,0 AS
C28,0 AS C29,0 AS C30,''TDACLR'' AS T0 from Store01.TDACLR
The OLD DB Source variable value looks like the following, but I am not showing the full 30 columns
select cast(0 AS varchar(100)) AS C1,cast(0 AS varchar(100)) AS C2,cast(0 AS varchar(100)) AS C3,cast(0 AS varchar(100)) AS C4,cast(0 AS varchar(100)) AS C5, ... cast(0 AS varchar(100)) AS C30.
The OLE DB Destination uses OpenRowSet Using FastLoad From Variable. The insert into Staging30 ends up looking like this.
insert bulk STAGE30([C1] varchar(100) ,[C2] varchar(100) ,[C3] varchar(100) ,[C4] varchar(100) ,[C5] varchar(100) , ... ,[C30] varchar(100) ,[T0] varchar(20)
Of course we then copy and transform the Staging30 data to the SQL table that equals T0.
But back to defaultbuffermaxrows. Previously the dtfs had default values of 10000 for DefaultBufferMaxRows and 10485760 for DefaultBufferSize. I added a SQL task to SUM the iSeries column sizes, TCREAS and TCDESC in this example, and set the DefaultBufferMaxRows by dividing the SUM of the columns max_length into 10485760. But I did not see a performance improvement. Do you think that redefining the columns as varchar(100) for the insert is significant? Should I possibly SUM the actual number of columns (2) as 2x100 or SUM the 30x100?
Basically i'm trying to create an SSIS workflow to download Sharepoint List data to SQL Server on a schedule of some kind.do we actually have to use the GAC install approach in order to get the Sharepoint List Destination and Sharepoint List Source entries to appear on the SSIS Project workflow entities?
View 4 Replies View RelatedIs it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.
View 4 Replies View RelatedI'm trying to edit the Expressions of a Data Flow task. This seems to happen when I rename some of the Data Flow components but not always. The error I get is:
Element "[ADO Net Source].[SqlCommand]" does not exist in the collection "Properties"
However, if you look at the XML, this property does exist. So I'm not sure why this should occur.
I'm using SSIS 2008 R2 with Visual Studio 2008 V 9.0.30729.4462 QFE.
<component id="1" name="ADO Net Source" componentClassID="{2E42D45B-F83C-400F-8D77-61DDE6A7DF29}" description="Extracts data from a relational database by using a .NET provider." localeId="-1" usesDispositions="true" validateExternalMetadata="True" version="4" pipelineVersion="0" contactInfo="Extracts data from a relational database by using a .NET provider.;
[Code] ....
We have created SSIS package to load a text file into a table. Source system shares 10 text files and recently they stopped generating data for one of the text file (comping empty), after few months they will start generating the data for the empty file batch processing.
The Issue here is Data Flow task is getting failed while loading empty text file into table. How to handle this empty file load issue in SSIS package.
I am looking for solution for "Communication link failure" since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
SQL server 2008 R2 Enterprise Edition and error description is below,
Started: 6:22:40 AM Error: 2015-08-19 18:50:32.70 Code: 0xC0202009
Source: Data Flow Task Lookup [193]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
[Code] ....
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
I have a relatively simple SSIS package that I'm building for a data mining process. The package starts with an OLE DB data source, passes the results of a SQL Command (query) along to a conversion step, which then gets sent to a Term Lookup task. The Term Lookup then writes the result to an OLE DB Data Destination. Pretty simple. The OLE DB data source query returns about 80,000 rows if you run it through SQL WB. The SSIS editor shows 9,557 rows make it out of the source, and into the conversion step, 9,557 make it out of the conversion and into the lookup, and about 60,000 rows make it out of the lookup and are written to the results table. Then the package fails with the following errors listed on the progress screen. I was assuming that the 9,557 was some type of batching that was occurring in the process, but now I'm not so sure.
Thoughts?
Frank
[DTS.Pipeline] Error: The ProcessInput method on component "My Component" (117) failed with error code 0xC02090E5. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC02090E5.
[DTS.Pipeline] Error: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread1" has exited with error code 0xC0047039.
[My Data Source Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "My Component" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I am using SQL Server 2012 SP1. I have built an SSIS package that imports flat file data from various files to SQL Server. I have got it to do everything I want it to do when things are going well, and am now on what I want it to do when it encounters a failure executing specific tasks and containers. For example, I have a Foreach Loop container that executes a dedicated stored procedure for each csv file in the target folder. If any of the store procedures fail to run for any reason I want to carry out certain actions.
For the most part I think I will be fine using the Event Handlers. What I can't seem to find is how to tell the package to stop executing on a Failure event after carrying out the actions defined by the relevant Event Handler. Or, perhaps it isn't necessary as that would be the default behaviour on a failure?
I have a job that runs every 3 minutes. The email that I received said the job failed at 10:30 a.m. but when I run the "All executions report" I see a skip in the times from 10:27 to 10:33. That failed Job is not logged as an execution.I looked in the system event log and I do not see anything odd at that time.
View 2 Replies View RelatedThe Database Trasnfer Task has failed with the following error......failed with the following error: "Invalid object name 'dbo.exampleViewName.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 9 Replies View RelatedAdd-Type -AssemblyName "Microsoft.SqlServer.ManagedDTS, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
$ssisApplication = New-Object "Microsoft.SqlServer.Dts.Runtime.Application"
$ssisPackagePath = "c:users estdocumentsvisual studio 2012ProjectsSAP$SharePointSAP$SharePointPackage.dtsx"
$ssisPackage = $ssisApplication.LoadPackage($ssisPackagePath,$null)
$ssisPackage.Execute()
In case of command execution from project PowerShell SSIS, writes only Failure to what there can be a problem? From VS it is launched without problems.
I have a package from SQL Server 2008 R2, that loads data from .xlsx file to database table.There are total 15 columns and 14000 rows in the .xlsx. The package runs fine in BIDS. But the same package in SQL Agent fails with error "omponent "Excel Source" (1)" failed validation and returned validation status "VS_ISBROKEN".
When I tried to run the package by deleting the half of the records for first 7000 rows it ran successfully in agent. Then the second half (last 7000 rows) also succeed from agent job. So, there is no issue with the data/datatypes.The agent job is able to run with record upyo 11000 rows in .xlsx. When I am running for 12000 rows it is failing.Is there any problem with the number of records in .xlsx or size through SQL Agent?
I am running the package from a Proxy account in sql agent job.
ERROR:
Error: Executed as user: PROXY_ID. Microsoft (R) SQL Server Execute Package Utility Version 10.50.6000.34 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 10:36:09 AM Error: 2015-08-10 10:36:10.87 Code: 0xC0202009 Source:
XX Connection manager "Excel Connection Manager 1"
[code]....
I'm trying to execute a SSIS package via proxy user but I keep getting the following error message regardless of I have tried to do to fix it, I have done the following so far:-
1. Recreated the proxy user
2. Retyped the password, under credentials
Message : Unable to start execution of step 1 (reason: Error authenticating proxy "proxyname", system error: Logon failure: unknown user name or bad password.). The step failed.
Is there any differene between on-error event handler and precedence constrain failure? I have created a package and if a data flow task(flat file to DB) fails, the file has to be moved to archive folder. How I have accomplished this is Dataflow task->precedence constrain failed(red arrow)->execute process task to move the file to error folder and it worked,The same execute process task( to move the file to error folder) doesnot work when I move this to on-error event handler. Also, for the same file the on-error event is getting triggered multiple times.
View 4 Replies View Relatedin a my SSIS 2012 pkg I'm using a Foreach ADO Enumerator container that reads an object variable in order to get an id value.This identifier is passed as an input parameter to an Execute SQL task to update an Oracle table: if this task fails the id is written on a SQL Server table. After the Execute SQL task execution, with success or failure, the flow go to another task in the container.
When an error occurs for the update on Oracle table, each tasks inside the container are executed but the container fails and the loop ends.I'd like to complete the entire loop respect to the identifiers present in the object variable also if the update operation on Oracle table goes in error.
I am using Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00.
My OLE DB Destiantion component is inserting data into a table. When there is duplicate it will failed. But I want ignore this since I know data is same. But even I set Ignore Failure from OLE DB Destioantion Editor. It will not work and every time you reopen editor, the buttom drop down box always showing as " Fail componet". When I try run it, it will always fail on the inserting duplicated rows.
Does anyone know how can I tell servies ignore this error.
Thanks!
Hello all,
I have an ETL process like that:
- Step 1: extract data from database DB2/AS400 to stage database SQL Server (with provider "ADO.NET ODBC")
- Step 2: extract data to stage database SQL Server to SQL Server
(With provider "Native OLE DBSQL Native Client")
During the step 2, if I have a table with a lot of lines (1 million or more), the data-flow takes a lot of time (some minutes) before to start extracting the data. That's quite frustrating and it affects the global time to integrate the data...
I don't know if SSIS scan the table before to integrate it. Moreover I'm almost sure that it was not like that some time ago (and I'm wondering what could have changed...)...
I just specify that the 2 SQL Server databases are on the same server.
Any idea is welcome.
Thanks,
Guillaume
When running the etl I'm getting the error: <SSIS Task>: Shared Memory Provider: Timeout error [258] ; followed by the message "Communication link failure".
What is special about this message that it happens on a SQL Execute task (random task) and the Timeout is after 2 minutes.
When executing the packages separatly it is working fine. The SQL Tasks that are failing are also quit heavy, but reasonable and takes between >2min and 10 - 15 min. Statements are stored procedures that puts an index on 3 mil. records or update statements,...
I had a look to all my (SSIS-etl) timeouts and they have the default value 0, the "remote query timeout" of the server is set to 10 minutes. According to me, these are the only one that exists?
There are 2instances on the server each instance has 24GB allocated, the server has 64 in total. Also when the etl runs (that results in an error) no other etl is running on the 2 instances. I'm working with the oledb sql server native client11.0 provider : SQLNCLI11.1.