Integration Services :: How To Perform Left Restricted Join In Merge Join Transformation

May 22, 2015

I have two xml source and i need only left restricted data.

how can i perform left restricted join?

Integration Services :: Merge Join Transformation - No Output Rows Redux

Aug 4, 2009

I am using SSIS in SQL Server Enterprise 2005. I have two OLE DB data sources from two disparate databases (IBM DB2 and Microsoft SQL Server), some columns from each of which are to be included in the merged output results. I have noted the various requirements in the forum postings with regard to sorting the OLE DB sources and specifying the output source columns as being sorted, as well as the requirement that the join fields in the two sources be close/exact matches. Yet, when I run this in VS, while the work area reflects the expected number of rows being input into the Merge Join transformation, no count is reflected as output from that transformation into the final destination table.Specifically, my two data sources (IBM DB2 and MS SQL) are configured as follows:

IBM DB2 contains an SQL statement that uses Cast operations to create the result columns.and an ORDER BY clause to ensure that the output is sorted by the desired two columns.. The OLE DB source property setting for IsSorted is set to true; the Output Columns folder column definitions for "key_ source_dtsy" and "key_source_dtrt" have their SortKeyPosition properties set to 1 and 2, respectively. Those field are both defined as data type DT_STR, with lengths of 4 and 2, respectively. Below is the Path metadata from the Data Flow Path editor from the path from this source:

IBM DB2 source"Name" "Data Type" "Precision" "Scale" "Length" "Code Page" "Sort Key Position" "Comparison Flags" "Source
Component""ID_CODE" "DT_STR" "0" "0" "10" "1252" "0" "" "Source F0005 User Defined Codes""CODE_DESCR_1" "DT_STR" "0" "0" "30" "1252" "0" "" "Source F0005 User Defined Codes""CODE_DESCR_2" "DT_STR" "0" "0" "30" "1252" "0" "" "Source F0005 User Defined Codes""key_source_dtsy" "DT_STR" "0" "0" "4" "1252" "1" "" "Source F0005 User Defined Codes""key_source_dtrt" "DT_STR" "0" "0" "2" "1252" "2" "" "Source F0005

User Defined Codes:

MS SQL contains an SQL statement that takes the columns as they are in the MS SQL table (no Cast operations needed); it also uses an ORDER BY clause to ensure the output is sorted by the join columns. The OLE DB source property setting for IsSorted is set to true; the Output Columns folder columns for "key_source_dtsy" and "key_source_dtrt" have their SortKeyPosition properties set to 1 and 2, respectively. Those field are both defined as data type DT_STR, with lengths of 4 and 2, respectively. Below is the Path metadata from the Data Flow Path editor from the path from this source:

MS SQL source"Name" "Data Type" "Precision" "Scale" "Length" "Code Page" "Sort Key Position" "Comparison Flags" "Source Component""id_code_name" "DT_I2" "0" "0" "0" "0" "0" "" "Source CodeName in db dwVdFY""key_source_dtsy" "DT_STR" "0" "0" "4" "1252" "1" "" "Source CodeName in db dwVdFY""key_source_dtrt" "DT_STR" "0" "0" "2" "1252" "2" "" "Source CodeName in db dwVdFY"

The Merge Join transformation specifies an INNER JOIN using the columns named "key_source_dtsy" and "key_source_dtrt" from the respective data sources.I know there are alternative ways of accomplishing my intent (Lookup, port MS SQL table to IBM DB2 so join can occur in SELECT statement, etc.; however, I'd like to use this functionality and assume that it should work.

View 13 Replies View Related

'Left Outer Merge Join' Failing To Join Valid Row

Aug 10, 2007

Scenario:

OLEDB source 1
SELECT ...
,[MANUAL DCD ID] <-- this column set to sort order = 1
...
FROM [dbo].[XLSDCI] ORDER BY [MANUAL DCD ID] ASC

OLEDB source 2
SELECT ...
,[Bo Tkt Num] <-- this column set to sort order = 1
...
FROM ....[dbo].[FFFenics] ORDER BY [Bo Tkt Num] ASC

These two tasks are followed immediately by a MERGE JOIN

All columns in source1 are ticked, all column in source2 are ticked, join key is shown above.
join type is left outer join (source 1 -> source 2)

result of source1 (..dcd column)
...
4-400-8000119
4-400-8000120
4-400-8000121
4-400-8000122 <--row not joining
4-400-8000123
4-400-8000124
...

result of source2 (..tkt num column)
...
4-400-1000118
4-400-1000119
4-400-1000120
4-400-1000121
4-400-1000122 <--row not joining
4-400-1000123
4-400-1000124
4-400-1000125
...

All other rows are joining as expected.
Why is it failing for this one row?

View 1 Replies View Related

Integration Services :: Merge Inner Join Gives Different Output Based On Sort Key?

Sep 23, 2015

In the first image as can be seens i have 2 different data sources and then they are being joined using "Merge Inner Join". The "sort" is on BusinessEntityID column of Person table and "Sort1" is on "PersonID" of Customer table. The merge join of these 2 result in 19,119 rows.

On the other hand, if i use single data source and use a query with inner join on tables used in the first image (ie. 2 tables being used in 2 different data sources) as depicted in second image. Also, since merge cannot operate without SortKey i have defined TerritoryID as sort key in the advanced editor. The number of rows i get after this is "10,274". My select query was :

SELECT
P.BusinessEntityID,
P.PersonType,
P.Title,
P.FirstName,
P.MiddleName,
P.LastName,
P.Suffix,
C.TerritoryID
FROM stg.Person AS P
INNER JOIN stg.Customer AS C ON C.CustomerID = P.BusinessEntityID
ORDER BY C.TerritoryID;

According to me, it should have been the same as in first case i am using merge inner join and in second case i am using SELECT query with inner join. Upon drilling down i found that in the first case , my sort keys are BusinessEntityID and PersonID, if i modify this to CustomerID and BusinessEntityID as this is my join condition (in ithe inner join query shown above), i get the desired output. What i was wondering was, how the sort order change the Join Condition?

View 3 Replies View Related

Left Join Vs Left Outer Join Syntax Generates Different Execution Plans

Apr 16, 2008

Anyone know why using

SELECT *
FROM a LEFT OUTER JOIN b
ON a.id = b.id
instead of

SELECT *
FROM a LEFT JOIN b
ON a.id = b.id

generates a different execution plan?

My query is more complex, but when I change "LEFT OUTER JOIN" to "LEFT JOIN" I get a different execution plan, which is absolutely baffling me! Especially considering everything I know and was able to research essentially said the "OUTER" is implied in "LEFT JOIN".

Any enlightenment is very appreciated.

Thanks

View 5 Replies View Related

Integration Services :: Pass Single Column Of Values From Successful Merge Join To EXECUTE Statement

May 7, 2015

How do I pass a single column of values from a successful merge join to an EXECUTE SQL statement so it can be used with an "IN" criteria of the WHERE clause? Here's an example of my update statement with two random key values:

UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK IN ("XYZ123", "DEF890")

Is this even possible in SSIS, or am I better off using a loop and running the update EXECUTE SQL Statement for each individual key value, as in the following example?

UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK = "XYZ123"
UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK = "DEF890"

View 6 Replies View Related

Merge Join Transformation

Apr 17, 2008

Hi,

i have 2 input files,those are sorted on account no field , i use to merge these 2 files data into 1 file.i took merge join trans.... with inner join but i didn't get the output fields ,plz help me regarding this issue.......

View 1 Replies View Related

Merge Join Transformation Hangs

Nov 10, 2006

I have serached through this forum, and I could not find the solution.

My SSIS data flow is a simple one. Extracting two tables from Oracle using OLE DB Source , join them together using merge join and loading into a table in SQL server by SQL Server Destination.

I haven't gone through this simple procedure because Merge join always hangs there. Down to further investigation, I found one input (randomly one of two inputs) is always stuck. Sometimes the input is empty, sometimes is about half way.

Is there workround to see what is happening there and to fix this problem?

TIA

View 3 Replies View Related

Problem Using Merge Join Transformation In Sql Server 2005(SSIS)

Aug 10, 2006

Hi,
I am pretty new to SSIS. I am transferring some rows from 2 source tables to 1 destination table.
The 2 source tables have 1000 rows.They act as the 2 inputs to a merge join transformation where i perform the join between the 2 tables based on a couple of fields. But for some reason the output of the merge join gives me about 1018 rows .Shouldnt the destination also have only 1000 rows?
How do i solve tis problem?

Thanks in advance
Sat

View 1 Replies View Related

Transact SQL :: Difference Between Inner Join And Left Outer Join In Multi-table Joins?

Oct 8, 2015

I was writing a query using both left outer join and inner join. And the query was ....

SELECT
        S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
        Production.Suppliers AS S LEFT OUTER JOIN
       (Production.Products AS P
         INNER JOIN Production.Categories AS C

[code]....

However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases

i.e..

SELECT
        S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
        Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';

The result i got was same,i.e

supplier   country   productid   productname   unitprice   categorynameSupplier QOVFD   Japan   9   Product AOZBW   97.00   Meat/PoultrySupplier QOVFD   Japan   10   Product YHXGE   31.00   SeafoodSupplier QOVFD   Japan   74   Product BKAZJ   10.00   ProduceSupplier QWUSF   Japan   13   Product POXFU   6.00   SeafoodSupplier QWUSF   Japan   14   Product PWCJB   23.25   ProduceSupplier QWUSF   Japan   15   Product KSZOI   15.50   CondimentsSupplier XYZ   Japan   NULL   NULL   NULL   NULLSupplier XYZ   Japan   NULL   NULL   NULL   NULL

and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.

View 5 Replies View Related

Integration Services :: Why Merge Transformation Need To Sorted Inputs

Jul 16, 2015

Why Merge Transformation Need to Sorted Inputs?

View 4 Replies View Related

Select Command - Left Join Versus Inner Join

Aug 9, 2013

Why would I use a left join instead of a inner join when the columns entered within the SELECT command determine what is displayed from the query results?

View 4 Replies View Related

Right Join Returns Same Results As Left Join

Feb 5, 2015

Why does this right join return the same results as using a left (or even a full join)?There are 470 records in Account, and there are 1611 records in Contact. But any join returns 793 records.

select Contact.firstname, Contact.lastname, Account.[Account Name]
from Contact
right join Account
on Contact.[Account Name] = Account.[Account Name]
where Contact.[Account Name] = Account.[Account Name]

View 3 Replies View Related

How To Join 3 Tables Using Left Or Right Join Keyword?

Aug 17, 2007

Hi guys,

I'll appreciate any help with the following problem:

I need to retrieve data from 3 tables. 2 master tables and 1 transaction table.

1. Master table TBLOC contain 2 records :
rcd 1. S01
rcd 2. S02

2. Master table TBCODE contain 5 records:

rcd 1. C1
rcd 2. C2
rcd 3. C3
rcd 4. C4
rcd 5. C5

3. Transaction table TBITEM contain 4 records which link to 2 master table:
rcd 1. S01, C1, CAR

rcd 2. S01, C4, TOY
rcd 3. S01, C5, KEY
rcd 4. S02, C2, CAR

I use Left Join & Right Join to retrieve result below (using non-ASNI method) but it doesn't work.

Right Join method:

SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A RIGHT JOIN TBCODE B ON A.CODE = B.CODE

RIGHT JOIN TBLOC C ON A.LOC = C.LOC

GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE

When I use Non-ASNI method it work:

SELECT C.LOC, B.CODE, A.ITEM FROM TBITEM A, TBCODE B, TBLOC C

WHERE A.CODE =* B.CODE AND A.LOC =* C.LOC

GROUP BY C.LOC, B.CODE, A.ITEM ORDER BY C.LOC, B.CODE

Result:

LOC CODE ITEM
-----------------------------
S01 C1 NULL
S01 C2 NULL
S01 C3 CAR
S01 C4 TOY
S01 C5 KEY
S02 C1 NULL
S02 C2 CAR
S02 C3 NULL
S02 C4 NULL
S02 C5 NULL

Please Help.

Thanks.

View 3 Replies View Related

Left Join Vs Left Outer Join

Apr 7, 2008

Is there any difference between left join and left outer join in sql server 2000?please reply with example if any?
Thanks in advance

View 13 Replies View Related

Left Join Vs Left Outer Join

May 14, 2008

Hi,

Whats the diference between a left join and a left outer Join

View 5 Replies View Related

Merge Join (Full Outer Join) Never Finishes.

Jun 5, 2006

I have a merge join (full outer join) task in a data flow. The left input comes from a flat file source and then a script transformation which does some custom grouping. The right input comes from an oledb source. The script transformation output is asynchronous (SynchronousInputID=0). The left input has many more rows (200,000+) than the right input (2,500). I run it from VS 2005 by right-click/execute on the data flow task. The merge join remains yellow and the task never finishes. I do see a row count above the flat file destination that reaches a certain number and seems to get stuck there. When I test with a smaller file on the left it works OK. Any suggestions?

View 3 Replies View Related

Super Join - Is Merge Join The Answer?

Nov 7, 2006

Is there a way to do a super-table join ie two table join with no matching criteria? I am pulling in a sheet from XL and joining to a table in SQLServer. The join should read something like ��for every row in the sheet I need that row and a code from a table. 100 rows in the sheet merged with 10 codes from the table = 1000 result rows.

This is the simple sql (no join on the tables):

select 1.code, 2.rowdetail
from tblcodes 1, tblelements 2

But how to do this in SSIS?

Thanks - Ken

View 2 Replies View Related

How Would You Convert A Hash Join Into A Merge Join?

May 6, 2008

I read that merge joins work a lot faster than hash joins. How would you convert a hash join into a merge join? (Referring to output on Execution Plan diagrams.)
THANKS

View 3 Replies View Related

How To Perform Table JOIN?

May 5, 2008

Hi all,
Lets say that i have 3 tables, they are already related together, information on each of the 3 tables and their relationship between eachother can be found below:I am using Microsoft SQL Server 2005 Database in Visual Web Developer 2008 using VB programming (ADO.NET)The 3 tables are as follows:

FloorRoomLocation

Fields inside each of the tables can be found below:

Floor Table(PK) ID(Required) NameDisplayOrder
Room Table(PK) ID(Required) Name(PK, FK) FloorIDExchangeIDExtensionIPDeviceNameRemarks(Required) Equipment(Required) Floor2IDFloorLocationXFloorLocationY
Location Table(PK,FK) FloorID (Required) CountryName(Required) CityName(Required) BuildingName

The Relationships between the 3 tables are as follows:

ID field in Floor table is referenced by the field named FloorID in the Room Table
ID field in Floor table is referenced by the field named FloorID in the Location table

NOTE: Location Table serves only as an extension to Floor table thus they have a 1 to 1 relationship, due to My Projects Lead's instructions I am not allowed to consolidate the Floor Table and the Location Table as 1 whole table.
Floor Table has a 1 to Many Relationship with the Room Table.

I Have already done the physical relationships between each of the 3 tables in the Database Diagram, in Visual Web Developer 2008 Express Edition under the Database Explorer

So i have created this form to accept user input:

this form is in a aspx page called AddRooms.aspx

Country Name:______________ (data sent to location table)

City Name:_________________ (data sent to location table)

Building Name:______________ (data sent to location table)

FloorID:[This is a DropDownList which is databinded to the Floor Table]

Room Name:_______________ (data sent to room table)

*Just imagine that the above is a form to accept user input

*With a hit of a submit button all data will be sent to their respective tables in the database

Now i know that i have to JOIN tables in my database in order for my application to work, but i have no experience performing JOIN, i need great guys like you to help me apply JOIN to the 3 tables mentioned above, do let me know if you have any doubts in what i am trying to do.

Do give me that code that i can either apply in the (VB environment Visual Web Developer 2008) and/or in Microsoft SQL Server 2005 environment

Just need the SQL Statment that i will need to construct to perform the JOIN i need to.

Please Help

Many Thanks : )

View 2 Replies View Related

Integration Services :: Difference Between Audit Transformation And Row-count Transformation?

Apr 22, 2015

tell me the difference between Audit transformation and rowcount transformation.

Because audit and rowcount transformation will provide the environment variables.

Only difference i am finding is rowcount returns the count of rows its updating .

Apart from these is there any other difference?

Tell me the scenario where i need to use the audit transformation.

View 3 Replies View Related

Getting Count(*) From Left Side Of Join Using WHERE On Right Side Of Join

Jul 3, 2006

Hi,I have 2 tables: tblStatements and tblLines (one to many) AnytblStatements record can have many associated records in tblLines.The search criteria is against tblLines (ie tblLines.fldDateofService

Quote:

View 2 Replies View Related

Can Any One Tell Me The Difference Between Cross Join, Inner Join And Outer Join In Laymans Language

Apr 30, 2008

Hello

Can any one tell me the difference between Cross Join, inner join and outer join in laymans language

by just taking examples of two tables such as Customers and Customer Addresses

Thank You

View 1 Replies View Related

SQL LEFT JOIN Help

Jan 26, 2007

I'm trying to join 2 tables. I thought I was getting the correct results but it turns out I'm not.
My Query:
SELECT IVINVA, IVORDN, IVCSLN, IVRESR, IVCITM, CONVERT(varchar(12),CAST(IVIAMT as money),1) AS ExtPrice, CONVERT(varchar(12),CAST(IVPIVC as money),1) AS DistPrice, IVCSUM, IVQYCS, IVDESC, OIRESR, OIDPCT, CONVERT(varchar(12),CAST(IVPIVC - (OIDPCT / 100 * IVPIVC) as money),1) AS NetPrice FROM INVDET1_TBL LEFT JOIN ORDDIS_TBL ON ORDDIS_TBL.OIORDN = INVDET1_TBL.IVORDN AND ORDDIS_TBL.OIRESR = INVDET1_TBL.IVRESR WHERE IVORDN = '0859919' AND IVINVA = '00324024'
Basically, my problem lies in the seonc condition of the LEFT JOIN. I needed to set the two tables equal my item number, because in some situations I need that logic to get the correct result. It most other cases, that item column in the ORDDIS_TBL is NULL, thus giving me the wrong results. In that case, I would want the JOIN to only be ORDDIS_TBL.OIORDN = INVDET1_TBL.IVORDN, and not include the second part. Is there a way I can condition this with an If statement, If ORDDIS_TBL.OIRESR is Null then do this join, if not, then do this? I'm confused how to get the proper result here.

View 3 Replies View Related

Left Join Help

Jul 7, 2005

I need to make a left join from the freezefile f, to sped s, instead of having f.studentid = s.id in the where clause. Any help??

select f.studentid, f.studentname, f.sex, fs.mealstatus, s.except, s.lre, r.description, g.testid, g.scale_la, g.scale_ma, t.test_name, t.year
from freezefile f, fsapps fs, sped s, regtb_exception r, gqe_scores g, test_info t
where
f.type = 'ADM'
and
s.except = r.code
and
t.test_name = 'ISTEP'
and
t.year = 2004
and
g.testid = t.testid
and
f.studentid = fs.id
and
f.studentid = s.id
and
f.studentid = g.studentid

View 1 Replies View Related

Left/right Join

Aug 2, 2004

i'm shure it's some smal stiupid mistake bat I can't find it, PLZ help.

1)
select komorka from #plantemp
--result

komorka

09
10
I-P
II-P
III-P
SI/1
SI/2
SI/3

2)
select komorka,ustalenia from analiza_1 a where a.koniec between '20040701'and '20040731'

komorka ustalenia
SI/1788138.9300
SI/246638.4900
SI/216218.4000
08.0000

3)
select p.komorka,isnull(sum(ustalenia),0)
from #plantemp p left join analiza_1 a on p.komorka=a.komorka
where a.koniec between '20040701'and '20040731'
group by p.komorka

komorka ustalenia (sum)

08.0000
SI/1788138.9300
SI/262856.8900

I need all rows from table 1 bat right and left join gives me the same results, WHY

View 3 Replies View Related

Left Join

Jan 9, 2007

There are two tables:
tblIndices:
IndexID, Name
1index1
2index2
3index3
.
.
.

tblBasketConstituents
ID, ParentIndexID, ChildIndexID, Weight
121 20
223 80
313 50
412 50

As you can see the ParentIndexID and ChildIndexID fields refer to tblIndices.IndexID
I would like a stored procedure as follows:
show all index names and show the wights for the indexID you passed.
This is what I have so far and it is not correct yet. Not sure what the syntax should be.

alter PROCEDURE [dbo].[uspBasketIndices_Get]

@IndexIDint

AS

select
i.IndexID,
i.[Name],
bc.Weight
from
tblIndices as i left join tblBasketConstituents as bc on i.IndexID = bc.ParentIndexID
and i.IndexID = @IndexID
order by
i.[Name]

View 1 Replies View Related

How Many 'LEFT JOIN' Is Too Many?

Feb 26, 2004

Any one know any facts and figures about maximum Left Joins allowed (or recommended) in one query?

I am running a MS SQL 2000 my database is full of relational data and most of my foreign keys (INT data type) are a Clustered Indexed, Usually I will only be pulling one record from collection of about a dozen tables, but the Database is expected to grow fast and become big.

Right now I have a Stored Proc that has eight(8) LEFT JOINs in it. My worry is that this query will kill me as the database approaches 50,000 records.

Lito

View 6 Replies View Related

Left Join

Mar 6, 2007

Hi all. My query works fine, it generates reports but not my expected result.

select d.fullname, p.nickname, p.birthdate, p.birthplace,
p.gender, p.civilstatus, p.religion, p.nationality, p. weight, p.height,
p.haircolor, p.eyecolor, p.complexion, p.bodybuilt, p.picture, p.dialectspoken,
d.mobilephone, d.prprovince,[Age] = dbo.F_AGE_IN_YEARS( birthdate, getdate() ),
c.name, c.address, c.telno, c.email, c.occupation, ed.year1, ed.year2, ed.degree, sch.schname
from hremployees as e
inner join psdatacenter as d on e.empdcno = d.dcno
inner join pspersonaldata as p on e.empdcno = p.dcno
left join hrappempcharrefs as c on e.empdcno = c.empdcno
left join hrappempeducs as ed on e.empdcno = ed.empdcno
left join hrsetschools as sch on ed.schoolcode = sch.schcode

the above query gives a 77 records

if i ran "select * from hremployees" generates 60 records

i think the error is in the left joining.
hrappempcharrefs, hrappempeducs and hrsetschools must be left joined to hremployees.

thanks
-Ron-

View 5 Replies View Related

Left Join Using Vb 9.0 And LINQ

Dec 2, 2007

Hi Guys,
I started working with linq and vb9.0 but i have a small problem i could feagure how to solve in c# but not in vb
I wanted to make left join or right join on vb 9.0 and linq is it possible or this is only c# feature ?
Waiting to hear from u guys,
Thanks
Softy

View 2 Replies View Related

Left Outer Join-please Help!

Jan 7, 2002

Hello!
I need to write a query using left outer join and I'm having trouble with it.
I have 2 tables:customer and cust_info.
I want to pull all records from customer table and cust_info table even if there is no related data in cust_info table.
But I need one condition in this query:only records from customer table where cus_type in ("A","B","C").
I don't need all other types ("D","E").

So my query looks like this:

select customer.cus_name,customer.cus_address,customer.cu s_type,cus_info.status
from customer
left outer join cus_info ON customer.sxdat_pk = cus_info.sxdat_pk
and cus_type in ("A","B","C")
AND cus_info.cus_table = 'CUSTOMER'

The result should be like this:

cus_name cus_address cus_type status
Amoco 457 bent A new
Bingo 47 lone oak C NULL
Sears 1020 Magic dr. B exist

But my query pulls records for customers with type "D" and "E" that I'm trying to exclude from result.

Please help.
Thanks,
lena

View 4 Replies View Related

LEFT JOIN Problem

Apr 18, 2008

Hello everybody!!!

I have to left join 2 tables. The first consists of columns:id, description, descr_num.
The second table: id, descr_num, value.

I need to extract description from table1 where descr_num is in the range , say, 1-10.

LEFT JOIN

extract value from table2 ,descr_num should be in the same range. in table2 some values from (1,10) and desc_num could be not present.
BUT i want this left join to be limited as i said.

Is there any solution to this prob. without creating temp tables. Or actually can i do such a join?
Thank you

View 2 Replies View Related

Left Join Table

Jul 18, 2006

Now I have a table with the table design as following :

table cst_EmpProfile
intEmpId nvcEmpName nvcEmpAddress intEmployeeType bitActiv
1 Peter Null Null true
2 Juli 1, xxxx 2 true
3 Sam Null Null False

table cst_EmpType
intEmpType nvcEmployeeType
1 Free Enginner
2 Manager
3 Operator

To join the table but MUST follow the condition as bitActiv = TRUE:
select emp.nvcEmpName, emp.nvcEmpAddress, ety. nvcEmployeeType from cst_EmpProfile emp left join cst_EmpType on emp.intEmployeeTypee = ety.intEmpType and emp.bitActiv = 1.

But, the sql statement doesnt output the my expected result.
Because the data row return must be 1st and 2nd row as it bitActiv = true.
So, how's I going achieve what i want. tq.

View 1 Replies View Related