Integration Services :: ISNULL Not Working In Derived Column?
May 7, 2015
i have a derived column which contains the days of a month from 1 to 31
I have this expression for column 1:
(DT_R4)([1] == 4 ? 0.5 : ISNULL([1]) ? 0.0 : 1.0)
But the ISNULL function will not work. I am sure, there are some NULL Values in Column [1] but i get all the Time the value 1.0 back.
I need the Value 0 instead of NULL to calculate the days in an extra Column.
So that i have in the end a result column which have values for example: 4,5 or 5,5 .why ISNULL is not working?
View 7 Replies
ADVERTISEMENT
Jul 22, 2015
how to declare multiple derived columns in SSIS Derived Column Task in one attempt.as i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.
View 4 Replies
View Related
Jul 28, 2015
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
View 4 Replies
View Related
Jul 15, 2015
How to use derived columns in SSIS
string to datetime
Input value : (string)
14/03/2014
NULL
15/04/2015
Note : Having null or blank value
View 4 Replies
View Related
Nov 23, 2015
I am trying to figure out my expression here with derived column
source
Unavailable/Planned
output
Planned(which is after "/".
I achieved this in sql but not finding solution in SSIS Derived column transformation.
View 3 Replies
View Related
Jun 16, 2015
How can i write expression for below input?
1858;# 1234;#Chun Yang
I want to display only name.
View 2 Replies
View Related
Jul 8, 2015
So I am trying to change my date type which is in the 1/1/2015 12:30:10 PM to a 2015-1-1 00:00:00
So I am using Derived Columns to do the trnasformation in Visual Studio but I am getting the following error:
An error occurred while attempting to perform a typecast
So this is what I did
Step 1:
Load date into OLE DB Source
Step 2:
Replace function
REPLACE(ATL,"1/1/2015 12:30:10", "1900-01-01 00:00:00)
Step 3:
Replace Function
REPLACE(ATL,"/","-"0
Step 4:
Replace funtion
REPLACE(REPLACE(ATL, "AM",":00"),"PM",":00"
Step 5: this is where the error occurs
(DT_DBTIMESTAMP)ATL
Step 6:
Load into OLE DB Destination File
View 2 Replies
View Related
Aug 3, 2015
I have 10 columns i.e from Segment1 to Segment10. I need to concatenate it with ".". All 10 segments can be null. If any of the segment is null i do not want to show ".". This is the expression I am using
(DT_STR,100,1252)((ISNULL(SEGMENT1) ? "" : "." + SEGMENT1) + (ISNULL(SEGMENT2) ? "" : "." + SEGMENT2) + (ISNULL(SEGMENT3) ? "" : "." + SEGMENT3) + (ISNULL(SEGMENT4)
? "" : "." + SEGMENT4) + (ISNULL(SEGMENT5) ? "" : "." + SEGMENT5) + (ISNULL(SEGMENT6) ? "" : "." + SEGMENT6) + (ISNULL(SEGMENT7) ? "" : "." + SEGMENT7)
+ (ISNULL(SEGMENT8) ? "" : "." + SEGMENT8) + (ISNULL(SEGMENT9) ? "" : "." + SEGMENT9) + (ISNULL(SEGMENT10) ? "" : SEGMENT10))
But if any of the column contains Null or Blank I get ...... I do not want to show these .... if any segment is null.
What mistake am I doing in the above expression?
View 4 Replies
View Related
Oct 6, 2015
I have an SSIS package in which I need to include a derived column. I've done derived columns a ton when there is just one condition being "tested". In this case there are two. I have the following update statement for a table I'm inserting data into:
UPDATE STAGING_DIM_AR_INVOICE
SET SC_CODE =
(
CASE
WHEN REC_TYPE = 'P' AND SC_CODE IS NULL THEN 'ag'
WHEN REC_TYPE = 'I' AND SC_CODE IS NULL THEN 'OL'
[Code] ....
I'd like to be able to address this case on the load itself. I've used CONDITIONAL before, but not sure how that would work in this case. I'm trying to keep it as "simple" as possible.
View 5 Replies
View Related
Jun 4, 2015
I have the following 2 fields that are sourced from an Excel spreadsheet
DocNumber - a 10 digit number
PostingRow - a number between 1 and 999
I would like to produce a new column that is a concatenation of these two fields, but the PostingRow needs to be a 3 digit number eg. 1000256153-001 ....
View 7 Replies
View Related
Nov 6, 2015
Is it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies
View Related
Jun 4, 2015
there is a way to write an if statement for a derived column to count rows?
for example:
Row 35: PRI 7010
Row 100: PRI 7011
formula that when it gets to row 100. it will go back and look at 35 and use that data if the 7010 = 7010, if not use 7011,,,
View 2 Replies
View Related
Jun 4, 2015
I have one column CandidatePlaced (Data type Boolean).
Using data conversion i changed data type to DT_WSTR and then i used derived column to manipulate the data. Ex. 1 = "Yes" and 0 = "No"
[Candidate Placed ?] == "1" ? "Yes" : "No"
But at end of result i got all the columns as No. Some should be Yes.
View 7 Replies
View Related
May 18, 2015
Derived column that transforms a CASE statement?
CASE
WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] ='25' THEN 'Standalone'
WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] <> '25' THEN 'No main game'
ELSE LOWER(prod.[TX_PRODUCT_NAME])
END AS [TX_MAIN_GAME]
CAT_MAIN_GAME = nvarchar(6)
FK_GAME = nvarchar(2)
View 5 Replies
View Related
Jul 30, 2015
I'm currently loading a package that does a lookup on a column of data type nvarchar(4).The values itself are (A+, A, B+, B, C, D, /). The strange lookup behaviour is happening for each of the cases, so it's not related to a specific value. After trying to put the cache on NO CACHE, the lookup works perfectly. When using the default FULL CACHE the strange behaviour happens. Could it be related to the data type? I have not yet tried to use a CHAR instead of a NVARCHAR but it looks like people have similar issues using CHAR.
View 2 Replies
View Related
Apr 27, 2015
I have a lot of different data flows that need "Derived Column". There are maybe only 5 different such "Derived Column" but they appear many times. Is there a way to eliminate all that double work? It should be something that does not take me more time to do than just duplicating all the "Derived Columns".
View 2 Replies
View Related
Jan 1, 2014
I'm using SSDT 2012 to create SMO Connection Manager for transferring server objects. However the connection is not working, it always returns error message something like "server is not found". I tried to connect multiple servers, with both Windows and SQL authentications, none of them works. I found the SMO.dll is already installed in the specific folder on my development machine. What would be the reason of this error?
Edited---Added the error message below. I can connect the server using OLEDB or ADO.NET. So my question is, is there a service, protocol or port .... to get SMO Server ready for responding?
View 3 Replies
View Related
Aug 7, 2015
I have a dts package where user suggested me to run it on nth working day of every month.
View 7 Replies
View Related
Aug 21, 2015
I am trying to change variable value at run time in ssis 2012 package using DTEXECUI utility but can not see any changes happening in config file variable value and also data is not getting populated in my table as per new variable value.
What is the right syntax or method of dynamically changing variable value either through DTEXECUI or DTEXEC command prompt command.
View 2 Replies
View Related
Sep 21, 2015
I have an SSIS package that is pretty simple.
An Execute SQL task returns one row with two values that are correctly stored into variables.
Based off those two variables, a sequence container is chosen to execute.
That sequence container then does magic. The last step of the container has an execute SQL task that runs and stores the result in a variable - let's call this[User::result] with type Int32.
Based off the value in [User::result] one of two final tasks run. A non zero value executes one task; a zero value executes another. Basically,SOMETHING runs after this.
Simple? I thought so... except Step 4 doesn't work. If I set a post-execute breakpoint on the sequence container, the variables are populated as expected, but nothing else runs. If I add another task to run (without a conditional expression) to run after the sequence container completes, the pre-execute breakpoint shows the data looking exactly as I expect.
Those script tasks are just MessageBox.Show calls and the expression, as you can see, doesn't use variables at all.
View 5 Replies
View Related
Aug 24, 2015
SSRS Date Picker is not working in Google Chrome, it works in both IE and Firefox.
View 3 Replies
View Related
Mar 12, 2008
select isnull(comments,'-') as comments from drawing_version where drawing_code='ACC -Arch -IS-2008-54642' the comment value value is empty i want to display as "-"
View 3 Replies
View Related
Jun 17, 2015
I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies
View Related
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Oct 10, 2013
I have successfully created a linked server between SQL Server 2008 R2 and a Postgres db, and all is working fine, except when I try to run a stored procedure that returns a TEXT column.The top lines of the stored procedure (function in postgres) that is called are:
CREATE OR REPLACE FUNCTION get_defects()
RETURNS TABLE(defectid bigint, featurevalues text) AS ...
The function obviously executes correctly in postgres, however when I try to execute the function in SQL Server via the linked server:
SELECT *
FROM OPENQUERY(POSTGRES, 'SELECT * FROM get_defects()')
I get the error:
OLE DB provider "MSDASQL" for linked server "POSTGRES" returned message "Requested conversion is not supported.".
Msg 7341, Level 16, State 2, Line 1
Cannot get the current row value of column "[MSDASQL].featurevalues" from OLE DB provider "MSDASQL" for linked server "POSTGRES".The problem seems to be when trying to return the TEXT column featurevalues, as the following query executes as expected:
SELECT defectid
FROM OPENQUERY(POSTGRES, 'SELECT * FROM get_defects()')
View 3 Replies
View Related
Apr 19, 2015
we have a table with xml column. This column has a large xml data . I am trying to use ssis to import xml from sql column (table a) to destination (another table).
steps which i did in ssis:
1. execute sql task:
fetch the xml column by query and store "full result set" into an object variable.
2. foreach loop:
select Ado enumerator option and select variable which has reset set of execute sql task. In variable mapping selected a new variable of type string.
when I run package I get below error:
"Error: ForEach Variable Mapping number 1 to variable "User::variable" cannot be applied".
View 14 Replies
View Related
Dec 28, 2010
How to import data into SQL table from Excel column which has more than 255 characters?
View 7 Replies
View Related
Apr 10, 2015
I am having one store procedure which use to load data from flat file to staging table dynamically.everything is working fine. staging_temp table have single column.all the data stored in that single column below is the sample row.
AB¯ALBERTA ¯93¯AI
AI¯ALBERTA INDIRECT ¯94¯AI
AL¯ALABAMA ¯30¯
after the staging_temp data gets inserted into main table.my probelm is to handle such a file where number of columns are more than the actual table.if you see the sample rows there are 4 column separated by "¯".but actual I am having only 3 columns in my main table.so how can I get only first 3 column from the satging_temp table.output should be like below.
AB¯ALBERTA ¯93
AI¯ALBERTA INDIRECT ¯94
AL¯ALABAMA ¯30
View 45 Replies
View Related
Nov 17, 2015
I am working on a custom component to implement some rules based on the column name. I am looking for ways to identify the column name using lineage id. Is there anyway we can derive column name using the lineage id?
View 3 Replies
View Related
Sep 3, 2015
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
View 3 Replies
View Related
Nov 3, 2015
I am working on 1 POC project.I have 2 customer having source file in txt format, but the column sequence of both customer are diffrent.Number of columns in all files are like below.
CustA
ID NAME AGE
1 VIPIN 29
CustB
ID AGE NAME
2 29 jayesh
As per source file you can see that CustA have column sequence ID,NAME,AGE and CustB Have ID,AGE,NAME sequence .I have target table #Temp with ID,NAME,AGE sequence.Like that I have many files from both customer, I have to load in ID,NAME,AGE sequence from all source file to target table.How can we change the sequence of source column before loading to target table.
View 5 Replies
View Related
Aug 18, 2015
How can we delete the column from SSIS file using ssis?
View 3 Replies
View Related
Nov 13, 2015
I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get
TITLE: Microsoft Visual Studio
------------------------------
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.
The columns are there in the preview - why can't SSIS get the column information?
View 6 Replies
View Related
