Integration Services :: Lookup Transformation - Used Destination Table For Reference Using Full Cache Mode
Jul 1, 2015
My source has 2.2 million of records. I'm performing the incremental load.In the lookup transformation i used the destination table for the reference using Full cache mode.For the first time package executed successfully but when i executed the package second time, Suddenly Package hangs while running.Than i truncate the data from the destination table and restart the SQL Server Services.After doing all this i executed package again and it worked but when i executed package second time, again package hangs up .I have 8GB RAM and i5 2.5 GHz Processor laptop.
View 7 Replies
ADVERTISEMENT
Jul 29, 2015
I am using a lookup and full cache, occasionally i get this warning:[Lookup [150]] Warning: The component "Lookup" (150) encountered duplicate reference key values when caching reference data. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE. Now I know it is only a warning but it is highlighting a real issue.Is there a way of capturing that this has happened?
View 6 Replies
View Related
Jul 30, 2015
I'm currently loading a package that does a lookup on a column of data type nvarchar(4).The values itself are (A+, A, B+, B, C, D, /). The strange lookup behaviour is happening for each of the cases, so it's not related to a specific value. After trying to put the cache on NO CACHE, the lookup works perfectly. When using the default FULL CACHE the strange behaviour happens. Could it be related to the data type? I have not yet tried to use a CHAR instead of a NVARCHAR but it looks like people have similar issues using CHAR.
View 2 Replies
View Related
Jun 4, 2015
We are using the cache transformation in our project , while doing the cache transformation our disk space goes to 0 MB free and SSIS package execution not completes even after 3 hr..Initially we have around 34 GB free space on C: drive .Our server configuration is 64 RAM. We are caching the data from table which contains around 21 million records.We changed the path in properties (“BLOPTempStoragePath”,”BufferTempStoragePath”) of Data Flow task of SSIS in which we are using Cache Transformation.
View 6 Replies
View Related
Sep 6, 2010
I've a simple lookup transform in SSIS 2008 (R2). I've created it with a full cache and it worked fine. When i switch to partial cache, it will give me this error:
--------------------------------------------------------------------------------------------------
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at DFT_AdventureWorks [Lookup [411]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[Code] ....
I've created a OLE source with the following query :
SELECT
SalesOrderID,
OrderDate,
CustomerID
FROM Sales.SalesOrderHeader
And this will flow into the lookup transform and this has the following lookup reference query:
SELECT CustomerID,
AccountNumber
FROM Sales.Customer
WHERE CustomerID % 7 <>0
View 2 Replies
View Related
Jan 16, 2013
I work in the healthcare area, and am handling the survey data ETL's. There are around 8 different survey areas and based on information received from them for the visit they reference, I want to pull in more info from our invoicing database. My idea is this:
1.) Pull in the flat file to an ODBC staging table
2.) Cache all invoice records that fall between the MIN(Date of Service) and MAX(Date of Service) from the staging table.
3.) First lookup the information needed on patientID, providerID, date of service, and billing location.
4.) For the surveys that didn't match on those 4 columns, try looking up based on patientID, date of service, and billing location (since I could be 99% sure this would still return the record I need).
5.) For the remaining surveys, lookup based just on patientID and date of service. These records will be flagged for manual review because clearly, if a patient has multiple appointments in the same day, this will be prone to error.
However, in trying to use only 3 of the columns in the lookup, I get the error saying basically that I need to utilize all 4. Is there a way around this, or is there an entirely different way I should be approaching this? The reason I thought cache transform was the answer is because I will need to run a different package for each lookup, as the data and logic between each survey will vary, but the invoice data "pool" will stay the same regardless.
View 5 Replies
View Related
Aug 27, 2015
i want to use lookup transformation using Excel as a source.i am having two excel files .
file1 one of the column contains 'Andhrapradesh'
file2 one of the column contains 'ap'
here want to match these using lookup.
View 5 Replies
View Related
Nov 3, 2015
In my package I am using lookup to get new and similar record. I want to filter the rows for Lookup Reference Data Set by using Variable Value.
I have created variable @[User::CustId] with Int32 datatype, having default value 2 when I am trying to evaluate below query I am getting error
"select CustId,PartNm,LocId,LocTyp from loc where CustId= "+ @[User::CustId]
Error. The Data types "DT_WSTR" and "DT_I4" are incompatible for binary operator "+".
The operand types could not be implicitly cast into compatible types for the operation. To perform this operation , one or both operands need to be explicitly cast with the operator.
View 2 Replies
View Related
Aug 14, 2015
Is it possible to parameter the connection of a Lookup Transformation task - specifically the table/view name? I would like to be able to dynamically set the table that the Lookup Transformation is connecting to at runtime.I've looked into the "Use results of an SQL query" on the connection screen (which correlates to the "SqlCommand" property), but I'm unable to pass in a parameter this way.I've also looked into the SqlCommandParam, but that doesn't allow me to use a parameter in the "FROM" clause of the sql syntax.
View 4 Replies
View Related
Nov 3, 2006
Hi,
I have to perform a lookup in a table based on a query like:
"... where ? = [RefTable].fieldID and ? between [RefTable].AnotherFieldValue and [RefTable].AThirdFieldValue"
So, SSIS has put the CacheType to none. As I really need to speed up the job I want to set the CacheType to partial (full isn't an option due to the custom query I use here).
But here it comes: when using partial CacheType, one has to set the cache size manually - and I really don't know what value I should assign to it - is there a guideline on this topic?
I work on a Win2003 server platform with sql server 2005 - 2 processors - 2Gb Ram - enough disc space
Thanks in advance,
Tom
View 2 Replies
View Related
Feb 6, 2006
Hello,
I searched around and not been able to find any guidance on this question: if I am designing a lookup transformation, how do I decide what I should set the cache size to?
For the transformation on which I am currently working, the size of the lookup table will be small (like a dozen rows), so should I just reduce it to 1MB? Or should I not even bother with caching for a lookup table that small?
Hypothetically speaking, if I am working with much larger lookups in the future (let's say 30,000 rows in the lookup table), is there some methor or formula that I should use to try to figure out the best cache size?
If the cache size is set larger than the actual data being cached, is the entire cache size allocated in memory, or is the cache size managed to only be as large as it needs to be? In other words, is the cache size a maximum to which the cache will grow, or is it a preset that sets the cache for that lookup to exactly the specified size?
Thanks,
Dan Read
SSIS Blogging
View 4 Replies
View Related
Jun 19, 2007
Hello,
I have created SSIS package programmatically, I want to add Lookup transformation,
How can I add column from reference dataset to the transformation?
I have try to add new output column but it gives me an validation error, I write following coed to add new output column to lookup.
IDTSOutputColumn90 outputColumn = this.lookup.OutputCollection[0].OutputColumnCollection.New();
outputColumn.Name = col.Name;
outputColumn.Description = "Staging table output";
outputColumn.TruncationRowDisposition = DTSRowDisposition.RD_FailComponent;
outputColumn.ErrorOrTruncationOperation = "Copy Column";
outputColumn.SetDataTypeProperties(col.DataType, col.Length, col.Precision, col.Scale, col.CodePage);
Please suggest other way to add column from reference dataset to transformation output.
View 10 Replies
View Related
May 8, 2008
Hi guys,
I need to use a SQL statement to lookup a value from a SQL server database table that relates to a column in my dataflow.
Imagine a SQL database table called 'cars' with values of
Year | Description
2005 Ferrari 355
2005 Ferrari 355 Spider
2006 Ferrari 355 F1
In my data flow I have Year and Model eg.
Year | Model
2005 355
2006 355
In my SQL statement I want to select from the 'cars' table where the years match exactly but the 'description' is like the 'Model'. eg. %355%
So essentially, how do I construct the 'like' clause in the select statement to reference the 'Model' column please?
thanks for your help,
Chris
View 4 Replies
View Related
Mar 31, 2008
The logic I am trying to recreate via SSIS is the following SQL statement:
insert into db3.dbo.targettable1 -- Target database table
(SiteC,
Objecte,
Attrib1)
select distinct ?,
?,
from ? -- Source database table
join dbo.targettable2 c1 -- Target database table
on c1.Alias = ? and
c1.CSetID = ? and
c1.FacID = (select f.PFacID
from dbo.Fac f
where f.FacID = ?)
where not exists (select * from dbo.targettable2 c -- Target database table
where c.Alias = ? and
c.FacID = ? and
c.CSetID = ?)
I have an OLE DB Source that consists of an expression to approximate the following portion of the Above Select statement:
Select ?,
from ? -- Source database table and
The package has 2 global variables User:CSetID and User::FacID whose scope is global to the package and whose values are set within a Foreach Loop Container outside of the Data Flow Task
I was trying to reference the 2 global variables within the Looup Transformation to recreate the following portion of the SQL statement.but encounter errors:
join dbo.targettable2 c1 -- Target database table
on c1.Alias = ? and
c1.CSetID = ? and
c1.FacID = (select f.PFacID
from dbo.Fac f
where f.FacID = ?)
In the Advanced Editor window of Lookup Transaction
select * from
(select * from [dbo].[targettable2 ]) as refTable
where [refTable].[Alias] = ? and [refTable].[FacID] = ? and
[refTable].[CSetID] = ?
Is there away to reference global variables in a Lookup Transformation that are set outside a Data Task Flow?
View 3 Replies
View Related
Nov 20, 2007
I'm either missing something or this is a bug. I have a Lookup that finds no matches if I use the default option of full caching (everything on the Advanced tab unchecked). The lookup table is relatively small (15348 bytes) in only 544 rows. If I check only the Enable Memory Restriction box and eliminate caching, it works fine. I can also check the Enable Caching box and accept the default cache size of 5MB and it works fine. Anyone have any ideas? I'm running on Standard Edition, SP2.
Thanks!
View 7 Replies
View Related
Aug 9, 2007
I would like to know what happens when a very large reference data set for a lookup transform with full caching enabled is getting loaded during package execution and the computer memory runs out or is very low.
Does SSIS
a) give an out of memory error of some sort
b) resort to a no caching or partial caching mode
c) maintain the full caching mode but will switch to using the paging file(virtual memory).
I think it will resort to using the page file in which case the benefits of in memory lookups are lost and performance would suffer. If I cannot upgrade the memory or shrink the reference set somehow, i should switch that lookup task to use partial caching or no caching with an indexed lookup table. Would this make sense?
View 1 Replies
View Related
Jul 22, 2015
How do I add only new rows to a destination table (when copying a table from another database every night) ?Every night I am copying a number of tables from one database to another.I only want to insert news rows (that are not in the destination table, but are in the source table) to the destination table.I might normally drop the destination table and just copy over the whole table, but in this case rows can be deleted from the source table, but I want to keep these old rows in the destination table (to maintain history). So I only want to add in rows to the destination table that have been added to the source table since last time.I guess I could copy the whole of the source table to a temporary table in the warehouse, then use a T-SQL merge command to compare and just add new rows to the destination table- but suspect that this is not the best way.
View 8 Replies
View Related
Apr 22, 2015
tell me the difference between Audit transformation and rowcount transformation.
Because audit and rowcount transformation will provide the environment variables.
Only difference i am finding is rowcount returns the count of rows its updating .
Apart from these is there any other difference?
Tell me the scenario where i need to use the audit transformation.
View 3 Replies
View Related
Jun 26, 2015
I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,
CREATE TABLE ##SiteTemp
(
LEVEL2 VARCHAR(20),
LEVEL3 VARCHAR(25)
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
View 3 Replies
View Related
Jun 1, 2015
I have a requirement to take xml file, in case the number of column changes, it should not fail the package, rather it should load the data in destination table. Destination table could be altered separately depending on xml schema by the DB team in production.
View 3 Replies
View Related
Oct 6, 2015
How can I get table name and schema names of the source and destination in ssis package to insert into audit table....??
View 3 Replies
View Related
Nov 25, 2015
I am using SSIS integration between two database. Both databases are sql server 2008. using many integration but getting problem in two only only two integration giving problem, both are executing perfectly and out put also not showing any error.
but destination table not inserted/updated anything.
first issue integration is using data flow task with oledb source and destination.
second one is using execute task with for-eachloop container.
View 12 Replies
View Related
Sep 8, 2015
The only way to add a new column to an existing mapping that I know is to go to advanced editor and refresh. This however keeps only the default mapping (where the field names match), the rest is wiped out, so need to restore the mapping manually after that. Risky and annoying at the same time. Is there any alternative?
View 3 Replies
View Related
Jun 5, 2015
In my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation > Oledb Command
> Rowcount_Transformation1 > Oledb Command1
> Rowcount_Transformation2 > Oledb Command2
> Rowcount_Transformation3 > Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
View 7 Replies
View Related
Jun 10, 2015
Import.csv file looks like,
TABLE_NAME DESC CODE
tab1 table1 A
tab1 table1 B
tab1 table1 C
tab2 table2 D
tab2 table2 E
tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.
View 4 Replies
View Related
Sep 14, 2015
How do I know when its the right time to use the Cache Connection Manager? I understand that Full Cache mode eliminates the need to query the lookup table for every row.
Is the Cache Connection Manager intended for use by multiple packages that need access to the same lookup data?
View 5 Replies
View Related
Jun 28, 2006
Hi,
I have a common requirement (when I'm processing data rows from an input file) to perform some data manipulation in script then look up a value from a reference table and perform some further data manipulation depending on whether a matching value was found in the lookup table or not.
For example, say I'm processing Customer data rows and the first "word" (/token) of the FullName column might be a title or the title could be missing and it might be a forename or initial instead. I want to check the first word of this FullName column to see if it matches any valid title values in a ReferenceTitles lookup table. If I find a match I want to set my Title column to the value from the ReferenceTitles lookup table, otherwise I want to set it to, say, an empty string. Then I want to process the rest of the FullName column tokens differently depending on whether or not a match was found.
It seems very messy to start coding a script transformation and then
have to use a lookup transformation combined with a script
transformation on the error output followed by a union and a sort
and finally a further script transformation (especially as I would like to be able to use variables from the first script in the later processing)...
So what I'm wondering is: Is there an easy/clean way to perform a database lookup (using cached values) from a script so that I can achieve all the above from within a single script component?
Thanks in advance,
Lawrie
View 8 Replies
View Related
Sep 26, 2006
hi all,
i'm a newbie in SSIS. i created a package to transfer data from one table to another. before the data flow, i added a Execute SQL Task package that truncate the dest table if it exists and create a new one if it doesn't.
i'll encounter an error (invalid object name) when i run the whole package but no error if i execute the tasks 1 by 1.
what's the workaround for this? thanks!
View 3 Replies
View Related
May 4, 2006
Hello,I have a query that I need help with.there are two tables...Product- ProductId- Property1- Property2- Property3PropertyType- PropertyTypeId- PropertyTypeThere many columns in (Product) that reverence 1 lookup table (PropertyType)In the table Product, the columns Property1, Property2, Property3 all contain a numerical value that references PropertyType.PropertyTypeIdHow do I select a Product so I get all rows from Product and also the PropertyType that corresponds to the Product.Property1, Product.Property2, and Product.Property3ProductId | Property1 | Property2 | Property3 | PropertyType1 | PropertyType2 | PropertyType3 PropertyType(1) = PropertyType for Property1PropertyType(2) = PropertyType for Property2PropertyType(3) = PropertyType for Property3I hope this makes sence.Thanks in advance.
View 3 Replies
View Related
Jul 6, 2006
Hi all,
In BOL it says: "The Lookup transformation performs an equi-join between values in the transformation input and values in the reference dataset. Using an equi-join means that each row in the transformation input must match at least one row from the reference dataset. If there is no matching entry in the reference dataset, no join occurs and no values are returned from the reference dataset. This is an error, and the transformation fails, unless it is configured to ignore errors or redirect error rows to the error output. "
I have a lookup transformation which is supposed to find a match on two fields in the reference dataset (a table in my case) but strangely, when I execute my package and the reference table is empty the lookup still finds match for each row of my input dataset.
Does anyone have an idea why? I could'nt find anything about that in BOL.
Sébastien.
View 4 Replies
View Related
Apr 1, 2014
I am stuck on finding a solution to transpose source data from a system via a metadata look-up table into a destination table. I need a method to transpose/pivot the source data into columns (which are by various data-types). The datatypes for each column are listed in a metadata table.
Source Data Table:
Table Name: Source
SrcID AGE City Date
01 32 London 01-01-2013
02 35 Lagos 02-01-2013
03 36 NY 03-01-2013
Metadata Table:
Table Name:Metadata
MetaID Column_Name Column_type
11 AGE col_integer
22 City col_character
33 Date col_date
Destination table:
The source data to be loaded into the destination table(as shown below):
Table Name: Destination
SrcID MetaID col_int col_char col_date
01 11 32 - -
01 22 - London -
01 33 - - 01-01-2013
02 11 35 - -
02 22 - Lagos -
02 33 - - 02-01-2013
03 11 36 - -
03 22 - NY -
03 33 - - 03-01-2013
View 7 Replies
View Related
Jul 27, 2015
ConnectionManager manager = Microsoft.SqlServer.Dts.Runtime.DtsConvert.GetWrapper(base.Connections.Connection);
IDTSConnectionManagerCache100 cache = manager.InnerObject as IDTSConnectionManagerCache100;
if (cache != null)
{
System.Windows.Forms.MessageBox.Show("Cache is found.");
}
and use
IDTSConnectionManagerCacheColumn100 id = connMgr.Columns["Id"]; get the column info.
but how do i get the cache connection content ?I want to look in the content in a script component code.
View 4 Replies
View Related
Apr 9, 2008
Hello,
I have developed some packages to load data into "Fact" tables in the data warehouse.
Some packages are OK, other ones not. What is the problem?: some packages load fact tables with lots of "Lookup - Data Flow Transformation" into the "data flow task" (lookup against dimension tables) but they are very very slow, too much slow to be choosen as a solution.
Do you have any other solutions to avoid using "Lookup - Data Flow Transformation"? Any other solution (SSIS, TSQL and so on....) is welcome to speed up the Fact table loading process.
Thank in advance
View 7 Replies
View Related
