I'm trying to create an SSIS package job in SQL server 2014 but I get the following error when trying to change the Package source and confirm. I have alsredy checked the connection mangers and they were all successful, I'm not sure what I should be checking.
"Make sure that the required parameter "name of parameter" is set".
I have following job script. I need to make file connection and db connection passing in job as parameter.
where in following script is should pass it.
if i am passing here but when i change path it still getting old path in package.what i needs to change in package.also how to make connection dynamic so in each env when we deploy it will automatically change. We have sql job script for each env.
I'm after running into something in SSIS 2012 that I fail to grasp.
I have a package that provides a service to other packages. In order to provide that service it needs 4 parameters provided by the caller. So naturally I'm thinking I make those 4 parameters 'required'.
The caller uses Execute package task and provides the 4 parameters on the parameter mapping tab.
Yet the packages fails with the error message that one or more required parameters weren't provided.
I running SSIS package job without sql agent , it is working fine.when i am running through sql agent not running.
created Proxy account
job failed and give above error.
Server is cluster and taking data from desktop.
server is in one domain and desktop in another domain.
i have a nightly job (SSIS Package) scheduled using MS. The package loads data from the OLTP db to the warehouse. The server has 256GB memory and out of which 211GB is free.
the job runs w/o any problems but some times it fails with the following error"DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Violation of PRIMARY KEY constraint '<var>PrimaryKeyName</var>'. Cannot insert duplicate key in object '<var>TableName</var>'.".
When i researched this error i found out that its because of the memory issue. we have 222GB free memory and how come this is possible. Is there a way in the package or anywhere else where i can specify how much (percentage) of the memory that the SSIS package should use (something like SSRS threshold levelp).
I’ve been trying for a while now (won’t say how long), to get BIDS to read a very simple Excel file.
I’m talking SIMPLE!! No matter what I don, SSIS keeps throwing an error, and of course it doesn’t say what the error is, so I can’t really debug it.
I’ve tried this at least 20x with flat files, and it works perfect each time. I’ve done Data Conversions, Sorting, Union All, and several other Transformations; all work perfect.
Trying to used Excel as a data source, is proving to be a mind numbing experience. Of over 20 different attempts, it hasn’t worked even once. I can make it as simple as you can possibly imagine, and SSIS, refuses to even perform the first step (I’m not even trying to create a table in SQL Server anymore).
I have the Excel file path (very simple)
I have the Excel version (very simple)
I have the Connection Manager (very simple)
I have the Sheet name (very simple)
All I can do is see a preview of the Excel sheet before the process runs. As soon as I het F5, I get an instant error, for no reason whatsoever, and no debugging options,whatsoever.
if I have the following code:
using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Tasks.SendMailTask;
class TestSendMailTask
{
public static void Main()
{
Package pkg = new Package();
ConnectionManager smtpCM;
smtpCM = pkg.Connections.Add("SMTP");
smtpCM.Name = "SMTP Connection Manager";
smtpCM.ConnectionString = "smtphost";
Executable exe = pkg.Executables.Add("STOCKendMailTask");
TaskHost thSendMailTask = (TaskHost)exe;
{
thSendMailTask.Properties["SmtpConnection"].SetValue(thSendMailTask, "SMTP Connection Manager");
thSendMailTask.Properties["ToLine"].SetValue(thSendMailTask, "someone1@example.com");
thSendMailTask.Properties["CCLine"].SetValue(thSendMailTask, "someone2@example.com");
thSendMailTask.Properties["BCCLine"].SetValue(thSendMailTask, "someone3@example.com");
thSendMailTask.Properties["FromLine"].SetValue(thSendMailTask, "someone4@example.com");
thSendMailTask.Properties["Priority"].SetValue(thSendMailTask, MailPriority.Normal);
thSendMailTask.Properties["FileAttachments"].SetValue(thSendMailTask, "C:\test_image.jpg");
thSendMailTask.Properties["Subject"].SetValue(thSendMailTask, "Testing the SendMail Task");
thSendMailTask.Properties["MessageSourceType"].SetValue(thSendMailTask, SendMailMessageSourceType.DirectInput);
thSendMailTask.Properties["MessageSource"].SetValue(thSendMailTask, "This is only a test.");
}
DTSExecResult valResults = pkg.Validate(pkg.Connections, pkg.Variables, null, null);
if (valResults == DTSExecResult.Success)
{
pkg.Execute();
}
}
}
-------
How do I make it a workable package so it compiles , w/ javadoc style comments and instructions, so, other people can use it?
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?
I have a Data Flow task Within a for loop Container.. the for loop container receives the result of sql query, iterates over the result set and passes each variable to the OLE DB Source.. Now based on the parameter passed I need to execute a query.. say for example if the parameter passed is P1 execute SQL S1 , P2 then S2 & so on.. How do I use the Parameter passed in SQL Query?
View 12 Replies View RelatedI'm seeing a failure to refresh dependent parameters in a report I've got running in WSS 3.0. The same report functions fine deployed to Reporting Services site and it refreshes all parameters when I change dependencies. But in Sharepoint document library it seems to post and redraw page but the dependent parameters do not update.
I must hit the apply button which will refresh the dependent parameters. I can then select the updated multi-select lists and run the report fine.
I do not think this is the desired behavior.
I'm running WSS 3.0 with SQL 2005 sp2 CTP and Sharepoint Add-in CTP which I found here: Add-in
Is anyone experiencing problem with parameter driven reports? Seems to be related to parameter depth/dependency.
I have created a SSIS package which runs every hour from my Machine. First part of my Package runs a Execute SQl Task and result set (single row, single column) is a comma separated list of Unique Record Ids which have been updated in last hour. (i.e. FJ1,FJ2,FJ3) I capture this result in a variable and when I User script taks to display the value of this property, it appears as it should be.I pass this Variable to Execute SQL Task on Different ODBC Server using a Stored Procedure.My SQL Statement is as Following
call DeleteRowsById(?)
And then I have assigned my Variable (as SQL_Longvarchar) to Parameter 1 in Parameter mapping Section. (ParameterSize is -1) but it doesnt delete the records from the table. (I ran the SP manually in Workbench and it works as expected) Then i had an Idea and
as part of my SP I started making entries in a Temp table just to see whats coming up as variable. Insert in the table shows only first Charecter from the variable and which is why its not deleting any records.I can not find why my variable is being truncated.
I'm calling the SSIS packages through SQL agent job. The packages have variables defined with default values.The parent packages have no package configuration. The child packages have package configuration of ‘Parent Package variable’ type The variables are being passed from the job. The job calls the parent package which loops though the child packages. I would like to know how the variables traverse through the packages and the jobs?
Another doubt not related to above. I am unable to make any changes to the connections. Whatever changes I make it is getting reverted to the original if I click elsewhere. So as a workaround I view the code in XML and change.
In SSIS : how to set a parameter in a Script task?
View 4 Replies View Relatedpublic Sub Main()
Dim url, destination As String
destination = Dts.Variables("report_destination").Value.ToString + "" + "Report_" + Format(Now, "yyyyMMdd") + ".xls"
url = "http://localhost/ReportServer?/ssis_resport_execution/ssis_ssrs_report&rs:Command=Render&ProductID=" + Dts.Variables("ProductID").Value.ToString + "&user_id" + Dts.Variables("user_id").Value.ToString
+ "&rs:Format=EXCEL"
SaveFile(url, destination)
Dts.TaskResult = ScriptResults.Success
End Sub
How to pass more than one variable values in ssis as parameter values to ssrs. With the above code its showing as empty.If i am taking single variable i am able to render the data into excel sheet.
I'm using following command to populate my OLE DB Source. I have two of those in each Data Flow in my package. One of the OLE DB Sources points to my source database the other to the destination. In order to limit the number of rows I use the WHERE clause below. The [EnergyMiserFSRLive] being the the name of the source database. The Connection manager points to the destination database.
I would like an elegant way to replace [EnergyMiserFSRLive] with a parameter which I can reuse in each of my many data flows rather than use this hard coded value [EnergyMiserFSRLive].In particular I'm after the syntax of the below query that uses the parameter for [EnergyMiserFSRLive].
SELECT [SitesId]
,[SiteName]
,[FilePrefix]
,[City]
,[StateProv]
,[Country]
FROM [Sites]
WHERE SitesId >= (SELECT MIN(SitesId) FROM [DBNameFSRLive].[dbo].[Sites])
ORDER BY [SitesId]
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
Is it possible to parameter the connection of a Lookup Transformation task - specifically the table/view name? I would like to be able to dynamically set the table that the Lookup Transformation is connecting to at runtime.I've looked into the "Use results of an SQL query" on the connection screen (which correlates to the "SqlCommand" property), but I'm unable to pass in a parameter this way.I've also looked into the SqlCommandParam, but that doesn't allow me to use a parameter in the "FROM" clause of the sql syntax.
View 4 Replies View RelatedI am working with SQL Server 2012. I have deployed a SSIS project that has 2 packages in it. The package connection manager (Test) uses an expression to evaluate one of the Project parameter value (TestConnectionString) to set its ConnectionString property.
This works fine in a Dev environment. However when deployed to UAT, it keeps failing with the error:
PackageExport:Error: The result of the expression
"@[$Project::TestConnectionString]" on property
"Package.Connections[Test].Properties
[ConnectionString]" cannot be written to the property. The expression was evaluated, but cannot be set on the
property.
I can not seem to find what the issue could be. I have come across [URL] .... where it says: "If the package contains project parameters, the package execution may fail." but offers no solution.
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
Hi all,
I was wondering whether there is a way to show the user an error when the user did not select a specific parameter.
In my case, I have two optional parameters. The user has to select either one to view the report. If the user does not select either one, I would like to show some sort of an error page indicating so. However, all i am getting is a complete blank with no report in sight. I as a developer know this is an error as a result of missing parameters, but i was wondering whether I could produce a page or direct it to a page so that the user doesn't go all horrified at an empty page ?
Thanks
Bernard
i am parameterize my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:
Argument "" for option "parameter" is not valid. The command line parameters are invalid. The step failed.
what i need to do is pass different environment here while deploying to different env.
we can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
Is it possible to parm in a value to a SSIS
in my SSIS i have a variable;
Name : FileName
Scope : PackageName
Type : String
Value : ""
I have tried adding the following code in my vb.net project ;
pkg.Variables("filename").Value = "C: emp estfile.001"
pkg.execute()
but come up with the following error
A first chance exception of type 'System.MissingMemberException' occurred in Microsoft.VisualBasic.dll
Public member 'Variables' on type 'IDTSPackage90' not found.
can anyone help ?
Hi All,
Parameter passing in SSIS 2005 sometimes appears to be a cumbursome task. I have been digging into this topic for quite some time and here i note down some simple steps to demonstrate parameter passing at Package level.
(1) Create a SSIS project using Business Intelligence 2005 Or VS 2005.
(2) Create datasource (.ds) and Data Source View as required.
(3) A default SSIS Package by the name Package.dtsx is created. Double click this and you are shown tabs for Control Flow, Data Flow, Event Handlers, Package Explorer. On the Control Flow, drap and drop Execute SQL Task from Control Flow Items in the toolbar.
(4) Lets now create a variable at Package level. Right click anywhere in the control flow box (not on the Task created in Step 3 above). Click on the Variables on the context menu displayed. Variables window appears on the left of the screen. Click the Add Variable box in this window to create a variable. Name it var1 (or whatever you may like), Scope as Package, DataType as String and Value as MyValue. This is only the default value.
(5) Now let us edit the SQL Task created in Step 3. Double on it, on the General tab you can change its Name, Description. Set ResultSet as None. We shall proceed to execute a stored procedure by name MySPName and pass it a parameter. Set ConnectionType as OLE DB. Select the connection you creates in step 2. Set SQLSourceType as Direct input. SQLStatement as MySPName ? . Note the ? mark after the name of the stored procedure. This is important to accept the variable value (var1) created in Step 4.
(6) Select Parameter Mapping tab now. Click on Add button. Select the Variable Name as User::var1. This is the user created variable of Step 4. Select Direction as Input, DataType as Varchar and Parameter Name as @var1. Click on OK now.
(7) This sets up the basic of parameter passing. Compile the project to verify everything works. Right Click on the SQL Task and select Execute Task. This will execute the package taking default value of the variable. This can be used along with dtexec command with /set option to pass the parameter at command prompt.
When ever I try to view Running or Stored packages in Integration services I get the following error message.
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
BUTTONS:
OK
------------------------------
I am able to connect to Integration Services fine I just can't access Running or Stored Packages. Has anyone experienced this issue?
Hi All,
I am little new to 2005 so this may be an easy one. I have a IS package that I created on my local 32 bit machine. I have copied this package to one of our servers running SQL 2005 EE x64. The package executes fine until it gets to a VB Task at which point it errors with the message of "The Task "DefalutValues" cannot run on this edition of Integration Services It requires a higer level edition"
Is this a known bug/error that you can not build on a 32bit machine for a 64bit machine. I have set the precompilescriptINtoBinaryCode value to true.
If anyone has any suggestions please let me know.
Thank you.
I'm unable to find a solution to this truncation error on google.This happens only on one field which has comments. The offending Excel row/column has text that was entered in two lines i.e they entered the data and pressed "enter" and wrote a new line in the same row.Im using an Excel file source in SSIS and an OLEDB Destination (SQL Server) but one column keeps erroring out and I have tried to do the following:
1) Change output column width in advanced editor (still errors)
2) Data conversion tool between the source and destination (still errors)
In one of my package, i m getting this error:Error 128 Validation error. ST-MDR-NYMEXSPAN Connection manager "FF_errorEvent": The file name "fdyrs0 1MktDataWMDEVDevNymexSpanProcessingAreaAuditFilePackageErrorLog.csv" specified in the connection was not valid. ST-MDR NYMEXSPAN_ Enhan.dtsx 0 0 ..But in connection i have provided the valid file. Please see the screenshot below. After providing the valid file also, this connection manager is saying "A valid file name must be selected". I deleted the connection and tried to create a new connection again but still i m getting this error. Then i tried creating connection on my local folder then it worked fine. why in the shared path i am getting this error? and what should i do to overcome it.
1) I have access to this shared folder.
2) I have saved this connection in a variable.
3) Run64BitRuntime is set to false.
when executing my data flow package that contains only one source and one destination
OLE db source -> SQL server destination
the following errors occurs in my output
Error: 0xC0202009 at Data Flow Task(infraction action), SQL Server Destination [3600]: An OLE DB error has occurred. Error code: 0x80040E14.
Error: 0xC0202071 at Data Flow Task(infraction action), SQL Server Destination [3600]: Unable to prepare the SSIS bulk insert for data insertion.
Error: 0xC004701A at Data Flow Task(infraction action), DTS.Pipeline: component "SQL Server Destination" (3600) failed the pre-execute phase and returned error code 0xC0202071.
i've checked the structure of my source and destination table but nothing seems to be wrong
if someone have ever faced these errors help me :D
Hi all
I have two data sources - an excel spreadsheet and one access database of Customer details, (quite small in size) and I have to use SQL Server 2005 to Integrate the data and cleanse the data so that I could (in theory) import it into a CRM system (though I won't actually be importing it) as this is for coursework only.
Is there a simple steps to do this is SQL server and guides that I can follow that are relevent? As there are lots of tutorials and I haven't a clue where to start.
many thanks
little_tortilla
I am using derived column to convert string data to datetime .My string data :
Start Date
15/06/2015
30/06/2015
NULL
2015/06/24
I wrote in derived column expression:
(DT_DATE)(SUBSTRING(([Start Date]),7,2) + "/" + SUBSTRING(([Start Date]),5,2) + "/" + SUBSTRING(([Start Date]),1,4))
which is giving error :
[Derived Column 1 [5452]] Error: The "component "Derived Column 1" (5452)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "Start Date" (5650)" specifies failure on error. An error occurred on the specified object of the specified component.
How to write the expression in derived column to handle null value as well.
When i use single object variable to pass it to two sequence container having 2 different Foreach ADO Enumerator; seems like the scope of the variable is completed once sequence container 1 is done and second fails with below error
Foreach ADO Enumerator
Error: COM error object information is available. Source: "ADODB.Recordset" error code: 0x800A0BCD Description: "Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.".
Does we have to set any property so that object variable scope persist until both loops are completed.
It works fine if i push the data to 2 different object variables.
I am loading from SQL Server 2008 to Access 2010 using SSIS. One of the columns in the table I am loading into is a Number datatype and Fieldsize is long integer. The values are being truncated, so I want to change the Fieldsize to DOUBLE. However, when I do that I receive the error below. What should I do? I would like not to change my Windows registry.
This error can be caused by one of the following:
The maximum number of columns allowed in a table or the maximum number of locks for a single file is exceeded.
The indexed property of a field is changed from Yes (Duplicates OK) to Yes (No Duplicates) when duplicate data exists in the table.
An expression is not specified in the Expression property of a calculated field.
If the maximum number of locks per file was exceeded, you can increase the number by editing a registry entry. However, this is not a recommended option.
If you use Registry Editor incorrectly, you could cause serious problems that require you to reinstall the operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
Make a backup of the registry. Find the MaxLocksPerFile registry value by using the Windows Registry Editor, and then increase the value. The MaxLocksPerFile value is saved as part of the following key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftOffice14.0Access Connectivity EngineEnginesACE
If the Indexed property of a field and duplicate data is located in the table, reset the Indexed property to the previous setting, or remove duplicate records from the table.
While I was loading to the same table a few days ago, I received a warning and the task took approx 9 hours. I am attaching the screen shot.