Integration Services :: SSIS 2012 Pipe Delimited File With Cr/lf At The End Of Row?
Jun 17, 2014
I have a pipe delimited flat file having column headers with varying length which needs to be inserted into tables:
Col1|Col2|Col3|Col4|Col5|Col6|Description
1|12|ABC123|MCKDMC|DCDMCD|CDMKMCSD| Hello This is a description.
1|12|ABC123|MCKDMC|DCDMCD|CDMKMCSD| Hello This is a description data could not able to map
in SSIS 2012 HUHDCJ JNJNFCDNCD JCDJCNDJNCDJNCJDNCJNDCN.
The data in second row contains multiple lines of data. which failed to map in SSIS 2012 flat file connection manager. but in SSIS 2005 its working fine.
I have a problem with a PIPE "|" delimited flat file. I have a column "Description" in which we get a string in which we have PIPE "|" as data. How we can skip this and load it as a data into the column Description.
I set up a connection file in order to move data from sql to csv files. I should be at the last step, the data flow. but:I don't see any flat file in my destination assistant.
I need to process a 2012 Excel file. In SSIS Connection Manager, I am only given an option until Excel 2007 version. When I use this in my connection for Excel Source, I am prompted with this error when I attempt to select the name of the sheet:
"Could not retrieve the table information for the connection manager 'Excel Connection Manager'.
Failed to connect to the source using the connection manager 'Excel Connection Manager'"
I received a pipe-delimited file that I need to import. (It has the equivalent of 650+ fields on a single row). While I had no issue importing it (SSIS 2008) I noticed that the input connector, Advanced option, shows an "OutputColumnWidth" of only 50 for all fields.
I say only 50 because some of the pipe-delimited fields can supposedly have a max of 250 characters so I'm concerned about potential data truncation. Unless someone has another thought I plan to manually set those OutputColumnWidth fields to 250.
I have list (in an input file) where each row is about 20K in size (so it can't be stored in a sql table). I want to convert the list into a table as shown below:
I was planning to have SSIS pull in the "before" data, run a custom C# program in SSIS against it to massage the data to vertical (3-column format), then export the massaged data to a new text file. The new text file would later be imported into a sql table using SSIS.
I've got a query that returns the data I need. I want to put the query in a stored procedure such that, when the SP runs I get a pipe delimited text file on disk. I don't really want to mess with SSIS, etc. Is there a Q&D way to do this?
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
In my project source is Oracle and I am using ODBC to connect oracle for lading.I have create 2 project parameter for connection string one for connection and another for password..when I am making expression on ODBC connection it is showing error like below I can't establish a connection because our legacy driver doesn't support 'Password' as a connection string attribute.
when I am passing expression like @[$Package::V_Constring]+ "PWD=faster1" on odbc connection it working fine.
When I use just the ConnectionString property on the ODBC connection manager and use a 'pwd' attribute; all is well. E.g., "uid=<user>;pwd=<password>;Dsn=<dsn name>;". But as soon as I flip the sensitive attribute, I'm getting the classic error:
The expression will not be evaluated because it contains sensitive parameter variable..The sensitive parameter is desired, of course. I don't want the password in the clear.
Has any one managed to get Report Manager to have the option to export to pipe delimited? There are documents out there how to do it on SSRS; I need it on Report Manager. Any Suggestions?
I am writing the following code in my SSIS 2012 script task.I am deliberately trying to fali this code by adding some typos in the connection string.I want to catch the exception and display the exact exception message.but SSIS runtime is always throwing same error message as follows:
Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Below is the code
public void Main() { //TODO: Add your code here try { SqlConnection conn = new SqlConnection("Data Source=apsed1674;Integrated Security=true;database=EDX");
We are using the cache transformation in our project , while doing the cache transformation our disk space goes to 0 MB free and SSIS package execution not completes even after 3 hr..Initially we have around 34 GB free space on C: drive .Our server configuration is 64 RAM. We are caching the data from table which contains around 21 million records.We changed the path in properties (“BLOPTempStoragePath”,”BufferTempStoragePath”) of Data Flow task of SSIS in which we are using Cache Transformation.
I am using file path as package parameter in the SSIS 2012 package. This parameter has file path value which has spaces as there are spaces in some of the folders. When I execute the package from the SQL Agent job, I experience the following error:
Executed as user: xxxxx Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. The argument ""p_test";""xxxxxxx.comfilesCommon2015 "TEST" "Event" "ZONEDataCust" FilesOut" /Par "$ServerOption::LOGGING_LEVEL(Int16)";1 /Par "$ServerOption::SYNCHRONIZED(Boolean)";True /CALLERINFO "SQLAGENT" /REPORTING "E" " has mismatched quotes. The command line parameters are invalid. The step failed.
Parameter name: p_test Parameter value: xxxxxxx.comfilesCommon2015 TEST Event ZONEDataCust FilesOut
I am specifying this value in the sql agent job. The package is working fine locally with the same parameter value. I have tried using double quotes for the entire path but it did not work out. How can I get this resolved?
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
I'm after running into something in SSIS 2012 that I fail to grasp.
I have a package that provides a service to other packages. In order to provide that service it needs 4 parameters provided by the caller. So naturally I'm thinking I make those 4 parameters 'required'.
The caller uses Execute package task and provides the 4 parameters on the parameter mapping tab.
Yet the packages fails with the error message that one or more required parameters weren't provided.
I have an SQL Server 2012 with SSIS installed on Windows Server 2008 R2 Core. I'd like to connect remotley to SSIS but I receive the following error. 'The RPC server is unavailable.'
We are using MSBuild with a custom activity to build and deploy ISPACs from SSDT BI 2012. We are building the ISPAC by calling the invoke process activity which inturn performs a build of the solution using devenv.exe.
All of this is working fine until we have solutions/ projects (dtproj) with complex names. We have a solution named Company.Project.SSIS.Package.sln when we do a build it creates an ISPAC as expected however it is named incorrectly - Company.Project.ispac.
When we subsequently deploy the ISPAC, it creates a project in the catalog called Company.Project.SSIS again this is wrong. This also happend if i perform a manual build in VS2012.
The issue is, the automated deployment of the ISPAC fails as it is looking for a file with a different name. Is there a way of changing these settings?
As part of my package, i require a date (Only date, not DateTime) which is 10 months previous to get date.Eg: for today if the package executes, then i want 12/1/2014 , which i will use in my package as a filter like 'where date='?' where ? is a paramter which is is derived from the above logic
So, I have a project parameter @ppdate with value as -10. I create a variable with DateTime (because there is NO date type for SSIS) and gives the expression as below
dateadd("Month",@ppdate, DATEADD("D",-(DAY(GETDATE()))+1,GETDATE())) , I am getting '7/1/2011 11:33:38 AM' which i don't want - i want only '12/1/2014'. How can i get it?
To get '12/01/2014', If i change the variable from DateTime to string, then i think i cant use the value in the filter condition like ''where date='?' because this does not accept string. Is this correct?
The following error occurred when trying to connect to 2012/2014 SSIS Server using SSMS remotely. Local connection works fine.Using the info from below link does not resolve the problem. Permissions are granted through DCOM. If this cannot be resolved, packages will have to stored on filesystem instead. URL....Connecting to the Integration Services service on the computer "" failed with the following error: "Class not registered".
This error can occur when you try to connect to a SQL Server 2005 Integration Services service from the current version of the SQL Server tools. Instead, add folders to the service configuration file to let the local Integration Services service manage packages on the SQL Server 2005 instance.
I have a requirement of migrating DTS package which is done in Sql Server 2000 to SSIS 2012.
I started with one package having data driven query task and done with source for which i chose OLE DB Source and given the required select query in ssis 2012
I'm stuck now and i'm unable to choose the relevant tools in ssis 2012 for binding, transformation,queries and lookup tabs used in dts 2000 for this DDQT.
After adding Service Reference to WebService, the Script Component has Binary Code not found, red circle not showing these are the steps I followed:
1) Add Script Component as Source 2) Add 3 x Output Columns Col1,2 and 3 3) Add HTTP Connection URL>..Binary Code not found, red circle showing 4) Add test code to Sub CreateNewOutputRows Dim i As Integer = 6 Binary Code not found, red circle not showing 5) Add Service Reference URL...Binary Code not found, red circle showing again
Should just adding Service Reference cause Binary Code not found, red circle to appear. I have to set precompilescripttobinary option , however cannot see this option in 2012
in a my SSIS 2012 pkg I'm using a Foreach ADO Enumerator container that reads an object variable in order to get an id value.This identifier is passed as an input parameter to an Execute SQL task to update an Oracle table: if this task fails the id is written on a SQL Server table. After the Execute SQL task execution, with success or failure, the flow go to another task in the container.
When an error occurs for the update on Oracle table, each tasks inside the container are executed but the container fails and the loop ends.I'd like to complete the entire loop respect to the identifiers present in the object variable also if the update operation on Oracle table goes in error.
I have a source file as filename.mar it is microsoft access report. When I am loading into my database the file name was something like filename.nov (its current month).
When I ran the package its shows error system cannot find the file filename.nov.
