Integration Services :: SSIS Lookup Not Working On Nvarchar Column Using FULL CACHE
Jul 30, 2015
I'm currently loading a package that does a lookup on a column of data type nvarchar(4).The values itself are (A+, A, B+, B, C, D, /). The strange lookup behaviour is happening for each of the cases, so it's not related to a specific value. After trying to put the cache on NO CACHE, the lookup works perfectly. When using the default FULL CACHE the strange behaviour happens. Could it be related to the data type? I have not yet tried to use a CHAR instead of a NVARCHAR but it looks like people have similar issues using CHAR.
View 2 Replies
ADVERTISEMENT
Jul 29, 2015
I am using a lookup and full cache, occasionally i get this warning:[Lookup [150]] Warning: The component "Lookup" (150) encountered duplicate reference key values when caching reference data. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE. Now I know it is only a warning but it is highlighting a real issue.Is there a way of capturing that this has happened?
View 6 Replies
View Related
Jul 1, 2015
My source has 2.2 million of records. I'm performing the incremental load.In the lookup transformation i used the destination table for the reference using Full cache mode.For the first time package executed successfully but when i executed the package second time, Suddenly Package hangs while running.Than i truncate the data from the destination table and restart the SQL Server Services.After doing all this i executed package again and it worked but when i executed package second time, again package hangs up .I have 8GB RAM and i5 2.5 GHz Processor laptop.
View 7 Replies
View Related
Jan 16, 2013
I work in the healthcare area, and am handling the survey data ETL's. There are around 8 different survey areas and based on information received from them for the visit they reference, I want to pull in more info from our invoicing database. My idea is this:
1.) Pull in the flat file to an ODBC staging table
2.) Cache all invoice records that fall between the MIN(Date of Service) and MAX(Date of Service) from the staging table.
3.) First lookup the information needed on patientID, providerID, date of service, and billing location.
4.) For the surveys that didn't match on those 4 columns, try looking up based on patientID, date of service, and billing location (since I could be 99% sure this would still return the record I need).
5.) For the remaining surveys, lookup based just on patientID and date of service. These records will be flagged for manual review because clearly, if a patient has multiple appointments in the same day, this will be prone to error.
However, in trying to use only 3 of the columns in the lookup, I get the error saying basically that I need to utilize all 4. Is there a way around this, or is there an entirely different way I should be approaching this? The reason I thought cache transform was the answer is because I will need to run a different package for each lookup, as the data and logic between each survey will vary, but the invoice data "pool" will stay the same regardless.
View 5 Replies
View Related
Sep 6, 2010
I've a simple lookup transform in SSIS 2008 (R2). I've created it with a full cache and it worked fine. When i switch to partial cache, it will give me this error:
--------------------------------------------------------------------------------------------------
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at DFT_AdventureWorks [Lookup [411]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[Code] ....
I've created a OLE source with the following query :
SELECT
SalesOrderID,
OrderDate,
CustomerID
FROM Sales.SalesOrderHeader
And this will flow into the lookup transform and this has the following lookup reference query:
SELECT CustomerID,
AccountNumber
FROM Sales.Customer
WHERE CustomerID % 7 <>0
View 2 Replies
View Related
Aug 9, 2007
I would like to know what happens when a very large reference data set for a lookup transform with full caching enabled is getting loaded during package execution and the computer memory runs out or is very low.
Does SSIS
a) give an out of memory error of some sort
b) resort to a no caching or partial caching mode
c) maintain the full caching mode but will switch to using the paging file(virtual memory).
I think it will resort to using the page file in which case the benefits of in memory lookups are lost and performance would suffer. If I cannot upgrade the memory or shrink the reference set somehow, i should switch that lookup task to use partial caching or no caching with an indexed lookup table. Would this make sense?
View 1 Replies
View Related
Dec 9, 2013
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
[CustomerId] [nvarchar](50) NULL,
[CustomeName] [nvarchar](50) NULL,
[CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
View 5 Replies
View Related
Jun 4, 2015
We are using the cache transformation in our project , while doing the cache transformation our disk space goes to 0 MB free and SSIS package execution not completes even after 3 hr..Initially we have around 34 GB free space on C: drive .Our server configuration is 64 RAM. We are caching the data from table which contains around 21 million records.We changed the path in properties (“BLOPTempStoragePath”,”BufferTempStoragePath”) of Data Flow task of SSIS in which we are using Cache Transformation.
View 6 Replies
View Related
Aug 7, 2015
I am trying to implement fuzzy lookup transaformation in my ssis package. However, I want to understand the basic logic behind this component. what is the algorithm that is used here and how it works (in a simple languange) ?
View 7 Replies
View Related
Nov 20, 2007
I'm either missing something or this is a bug. I have a Lookup that finds no matches if I use the default option of full caching (everything on the Advanced tab unchecked). The lookup table is relatively small (15348 bytes) in only 544 rows. If I check only the Enable Memory Restriction box and eliminate caching, it works fine. I can also check the Enable Caching box and accept the default cache size of 5MB and it works fine. Anyone have any ideas? I'm running on Standard Edition, SP2.
Thanks!
View 7 Replies
View Related
Jul 30, 2015
We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
View 2 Replies
View Related
May 7, 2015
i have a derived column which contains the days of a month from 1 to 31
I have this expression for column 1:
(DT_R4)([1] == 4 ? 0.5 : ISNULL([1]) ? 0.0 : 1.0)
But the ISNULL function will not work. I am sure, there are some NULL Values in Column [1] but i get all the Time the value 1.0 back.
I need the Value 0 instead of NULL to calculate the days in an extra Column.
So that i have in the end a result column which have values for example: 4,5 or 5,5 .why ISNULL is not working?
View 7 Replies
View Related
Apr 1, 2008
I designed an SSIS package about 200 packages in one project.
the package extract from live to reporting server. some of my packages are very slow about 10 of them. strage enough the ones with more data number of rows run very fast. I'm using Source->Lookup->Conditional split->OLEDB Destination or OLDB Comand.
Can someone help me to found out what could be the problem. I'm very new in SSIS.
View 3 Replies
View Related
Jul 11, 2007
Hi, I was wondering if any SQL Server gurus out there could help me...
I have a table I'm trying to apply a full text catalog to, however no results are ever returned due to the text column being cataloged being of varbinary(max) that's being populated from a converted nvarchar(max) value.
To re-create the problem quickly...
If I populate the column via
CONVERT(varbinary(max), 'test text')
then there is no problem, I get results as expected.
However if I populate the column via
CONVERT(varbinary(max), CAST('test text' as nvarchar(max)))
no results are ever returned.
Is this a bug with SQL Server 2005 Full Text Indexing? I'm happily creating full text catalogs when an nvarchar is not getting converted into a varbinary.
I'm setting the Document Type column to '.html' (I've tried changing this to '.txt' in case it was a fault with the html ifilter but the problem persists so I believe I can rule this out).
The reason I need to convert an nvarchar to varbinary is that the table holds multi-lingual text and I'm adding a html meta tag <META NAME="MS.LOCALE" CONTENT="ES"> to the beginning in order for the full text indexing word breaker to select the correct language to catalog the text with. The aim being to provide more relevant searches in users native languages (I've read a few articles that describe this technique, but it's the first time I've tried to apply it).
Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.
Below is a T-SQL script you can run to demonstrate the effect I'm experiencing...
-- Create test database
CREATE DATABASE FullTextTest
GO
USE FullTextTest
GO
-- Create test data table
CREATE TABLE TestTable
(
pk UNIQUEIDENTIFIER NOT NULL CONSTRAINT tablePK PRIMARY KEY,
varbinarycol VARBINARY(MAX),
documentExtension VARCHAR(5),
)
GO
-- The below single entry WILL BE FOUND (the text source is being entered directly)
INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(), CONVERT(VARBINARY(MAX),'<META NAME="MS.LOCALE" CONTENT="EN">test entry 1'), '.html')
-- The bellow two entries below WILL NOT BE FOUND (the text source is taken from an NVARCHAR(MAX) value)
INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(), CONVERT(VARBINARY(MAX), CAST('<META NAME="MS.LOCALE" CONTENT="EN">test entry 2' AS NVARCHAR(MAX))), '.html')
INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(), CONVERT(VARBINARY(MAX), CAST('<META NAME="MS.LOCALE" CONTENT="EN">test entry 3' AS NVARCHAR(MAX))), '.html')
GO
-- Create the full text catalog
sp_fulltext_database 'enable'
GO
CREATE FULLTEXT CATALOG TEST AS DEFAULT
GO
CREATE FULLTEXT INDEX ON TestTable (varbinarycol TYPE COLUMN documentExtension LANGUAGE 1033)
KEY INDEX tablePK
GO
-- NOTE: You might need to give the catalog a chance to build before running the script below.
-- Now do a search that SHOULD RETURN 3 ROWS of data, but ONLY 1 ROW IS RETURNED
SELECT CAST(varbinarycol AS NVARCHAR(MAX)) FROM TestTable WHERE CONTAINS(varbinarycol, 'test')
View 3 Replies
View Related
Jul 11, 2007
Hi, I was wondering if any SQL Server gurus out there could help me...
I have a table I'm trying to apply a full text catalog to, however no results are ever returned due to the text column being cataloged being of varbinary(max) that's being populated from a converted nvarchar(max) value.
To re-create the problem quickly...
If I populate the column via
CONVERT(varbinary(max), 'test text')
then there is no problem, I get results as expected.
However if I populate the column via
CONVERT(varbinary(max), CAST('test text' as nvarchar(max)))
no results are ever returned.
Is this a bug with SQL Server 2005 Full Text Indexing? I'm happily creating full text catalogs when an nvarchar is not getting converted into a varbinary.
I'm setting the Document Type column to '.html' (I've tried changing this to '.txt' in case it was a fault with the html ifilter but the problem persists so I believe I can rule this out).
The reason I need to convert an nvarchar to varbinary is that the table holds multi-lingual text and I'm adding a html meta tag <META NAME="MS.LOCALE" CONTENT="ES"> to the beginning in order for the full text indexing word breaker to select the correct language to catalog the text with. The aim being to provide more relevant searches in users native languages (I've read a few articles that describe this technique, but it's the first time I've tried to apply it).
Any pointers / suggestions would be greatly appreciated. Cheers,
Gavin.
Below is a T-SQL script you can run to demonstrate the effect I'm
experiencing...
-- Create test database
CREATE DATABASE FullTextTest
GO
USE FullTextTest
GO
-- Create test data table
CREATE TABLE TestTable
(
pk UNIQUEIDENTIFIER NOT NULL CONSTRAINT tablePK PRIMARY KEY,
varbinarycol VARBINARY(MAX),
documentExtension VARCHAR(5),
)
GO
-- The below single entry WILL BE FOUND (the text source is being entered
directly)
INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(),
CONVERT(VARBINARY(MAX),'<META NAME="MS.LOCALE" CONTENT="EN">test entry 1'),
'.html')
-- The bellow two entries below WILL NOT BE FOUND (the text source is taken
from an NVARCHAR(MAX) value)
INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(),
CONVERT(VARBINARY(MAX), CAST('<META NAME="MS.LOCALE" CONTENT="EN">test entry
2' AS NVARCHAR(MAX))), '.html')
INSERT INTO TestTable (pk, varbinarycol, documentExtension) VALUES (NEWID(),
CONVERT(VARBINARY(MAX), CAST('<META NAME="MS.LOCALE" CONTENT="EN">test entry
3' AS NVARCHAR(MAX))), '.html')
GO
-- Create the full text catalog
sp_fulltext_database 'enable'
GO
CREATE FULLTEXT CATALOG TEST AS DEFAULT
GO
CREATE FULLTEXT INDEX ON TestTable (varbinarycol TYPE COLUMN
documentExtension LANGUAGE 1033)
KEY INDEX tablePK
GO
-- NOTE: You might need to give the catalog a chance to build before running
the script below.
-- Now do a search that SHOULD RETURN 3 ROWS of data, but ONLY 1 ROW IS
RETURNED
SELECT CAST(varbinarycol AS NVARCHAR(MAX)) FROM TestTable WHERE
CONTAINS(varbinarycol, 'test')
www.gavinharriss.com
View 1 Replies
View Related
Jun 17, 2015
I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies
View Related
Feb 24, 2006
I am using a lookup component in a SSIS data flow. The lookup is a select to a foxpro table. THe lookup works fine with full cache selected. I cannot get the lookup to work with a partial or no cache. I have the latest Foxpro OLE DB driver installed which I understand to support paramaterized queries. Has anyone had success with using cached lookup to Foxpro? Does anyone know how to set the lookup properties of sqlcommand and sqlcommandparam? I am unable to find any examples in BOL or on the web.
Here are some details. IF I go with "use a table or a view" option with the default cache query I get initialization errors
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E14 Description: "Command contains unrecognized phrase/keyword.".
In the advanced editor I see
SQLCommand set to
"select * from `kcf`"
and SQLCommandParam set to
"select * from
(select * from `kcf`) as refTable
where [refTable].[patkey] = ? and [refTable].[dayof_stay] = ? and [refTable].[modifier] = ? and [refTable].[kcf_code] = ? and [refTable].[source] = ? and [refTable].[kcf_time] = ?"
I believe the above error is because Foxpro V7 does not support the inner subselect . In addition the query contains CRLF without a continuation character (";").
If I remove the CRLF in the sqlcommandparam query, using the advanced editor, I get this design time error "OLE D error occurred while loading column metadata. Check the sqlcommand and sqlcommandparam properties". The designer requires both properties to be set, its unclear to me how the interact.
I cannot find any examples in BOL or on the web on how to set these 2 properties. Can someone give me a few guidelines?
I can get past the design errors by changing sqlcommandparam to a plain select that is VFP 7 compatible ( I removed the subselect and the square brackets):
select * from kcf as refTable where refTable.patkey = ? and refTable.dayof_stay = ? and refTable.modifier = ? and refTable.kcf_code = ? and refTable.source = ? and refTable.kcf_time = ?
But then I get a runtime error
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E46. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E46 Description: "One or more accessor flags were invalid.".
[lkp_lab_worst_value [6170]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
Any idea on what I should try next ?
View 3 Replies
View Related
Apr 19, 2015
we have a table with xml column. This column has a large xml data . I am trying to use ssis to import xml from sql column (table a) to destination (another table).
steps which i did in ssis:
1. execute sql task:
fetch the xml column by query and store "full result set" into an object variable.
2. foreach loop:
select Ado enumerator option and select variable which has reset set of execute sql task. In variable mapping selected a new variable of type string.
when I run package I get below error:
"Error: ForEach Variable Mapping number 1 to variable "User::variable" cannot be applied".
View 14 Replies
View Related
Jul 15, 2015
How to use derived columns in SSIS
string to datetime
Input value : (string)
14/03/2014
NULL
15/04/2015
Note : Having null or blank value
View 4 Replies
View Related
Nov 23, 2015
I am trying to figure out my expression here with derived column
source
Unavailable/Planned
output
Planned(which is after "/".
I achieved this in sql but not finding solution in SSIS Derived column transformation.
View 3 Replies
View Related
Aug 18, 2015
How can we delete the column from SSIS file using ssis?
View 3 Replies
View Related
Sep 14, 2015
How do I know when its the right time to use the Cache Connection Manager? I understand that Full Cache mode eliminates the need to query the lookup table for every row.
Is the Cache Connection Manager intended for use by multiple packages that need access to the same lookup data?
View 5 Replies
View Related
Apr 21, 2015
My Requirement IS : 1<sup>st</sup>run: if the record does not exist in the table insert the record (file_name, last_modified_file_date) and create a copy in the archive folder with file_name_currentdate.csv
Daily run: retrieve the last_modified_file_date from the input file and check if the retrieved date is greater than the last_modified_file_date in the table:
If true: create a copy of the input file in the archive folder and update the last_modified_file_date in the table with the retrieved date
If false don’t do nothing because the file has been archived in one of the previous runs.I have already retrieving the modified date and File Nae iserting into Filename Table: (That table has 2 columns which are FileName and FileDate) so In script task everytime the variable getting Modified date(retrieve the last_modified_file_date from the input file). How I can Compre the existing table record and variable. I have already imported the all Filenames and Modified into table like below.
View 3 Replies
View Related
Nov 2, 2015
I have some source files is there today it will have 4 columns..Tomorrow it will have 10 columns...my package is dynamically load the data to destination table..How we have do it in Using script task...
View 4 Replies
View Related
May 18, 2015
Derived column that transforms a CASE statement?
CASE
WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] ='25' THEN 'Standalone'
WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] <> '25' THEN 'No main game'
ELSE LOWER(prod.[TX_PRODUCT_NAME])
END AS [TX_MAIN_GAME]
CAT_MAIN_GAME = nvarchar(6)
FK_GAME = nvarchar(2)
View 5 Replies
View Related
Apr 28, 2015
I have a file with a header row which contains the date of the file and under that all the columns without a header.
In SSIS package I skip row and manually name the different columns.
However, I want to use the column in the header row to store the date value in an SSIS variable and use that variable to write it to our staging table. How can I do this when I skip the header row?
View 5 Replies
View Related
Oct 12, 2014
I have one scenario
Table
Col1. Col2
1. A,b,c,df,ghf
2. C,b
3. B
Output should be
Col1. Col2
1. A
1. B
1. C
1. Df
1. Ghf
2. C
2. B
3. B
View 9 Replies
View Related
Jul 16, 2015
Public Class ScriptMain
Inherits UserComponent
Dim smpid As String
Dim Prdt As String
Dim rcnt As Int64
[code]...
Using the Vb script above I am expecting to read the first row from a flat file source and transferring the data into two variable using script component.
SQL server 2008.
Script task Custom Properties:
Script Task Input Columns:
I get the following errors one after the other:"The collection of variables locked for read and write access is not available outside of PostExecute." "Object reference not set to an instance of an object."
View 3 Replies
View Related
May 2, 2007
What is the best way of using the Full-Text feature on HTML?
I want to only search the text and omit the html tags.
If that involves storing as a different format, can someone tell me the best way of doing that?
I'm very new to sql and especially full-text.
Thanks.
View 1 Replies
View Related
Apr 25, 2015
IN SSIS...
1.---->I have a sales table country wise regions like (india, usa, srilanka) ....
india usa
srilanka
a b
c
d e
f
So I want output like in
flat file1.txt has india flat file2.txt has usa flat file3.txt has srilanka
a b
c
d e
f
2.----->I dont know how many regions in my table....dynamically split into separate flat files ....
View 2 Replies
View Related
Jul 2, 2015
I have a flat with few columns
FirstName, lastName, Address
f1,l1,a1
f2,l2,a2
I build my SSIS package based on the above file.But now i receive files with different columns order let say
lastName,FirstNamr,Address
l1,f1,a1
L2,f2,a2
or
Address,FirstName,LastName
a1,f1,l1
a2,f2,l2
every time i receive multiple files in different order and i have to remap all my mappings. These are just a few columns and i have like 20 columns and the order can potentially change any time. so every time i have build new packages remap them etc.
through normal c# code it pretty easy. I tried to add script here but the script also needs a source and mapping so there is also a mapping issue. Is there a better way to do this.
View 10 Replies
View Related
Sep 3, 2015
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
View 3 Replies
View Related
Jul 22, 2015
how to declare multiple derived columns in SSIS Derived Column Task in one attempt.as i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.
View 4 Replies
View Related
