Integration Services :: Send Mail Task - Not Being Triggered
Oct 5, 2015
I have a Send Mail task as part of a validation process in a OnPostExecute event handler. All tasks preceding the Send Mail task get triggered and show green check mark next to them, but, for some reason, Send Mail task never gets one.
I checked the Execution Results tab and it doesn't show any indication of Send Mail task executing as a final step.
I checked the SMTP server configuration and did some test using localhost. I'm able to send as configured while using anonymous credentials.
View 4 Replies
ADVERTISEMENT
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Mar 26, 2015
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
View 0 Replies
View Related
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Aug 6, 2007
I have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine:
Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads:
SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
Any deas where this error comes from?
View 10 Replies
View Related
Jul 14, 2015
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies
View Related
Aug 18, 2015
I have trying to execute the Sendmail task in my development envinorment i face this error..I have given the clear details error message below,Please have a look.
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail. System.Net.WebException: Unable to connect to the remote server System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ".Alternatively i use the SMTP connection to create the subscription as well,its working properly.
Here we are accessing SMTP connection manager as Virtually.Here in my client network we are using Macafee Anti virus ,We have excluded the Rsconfigration file in the excluded list.I dont know why this problem occures again using Sendmailtask in ssis?
View 2 Replies
View Related
Sep 14, 2015
I have a complex SSIS package which processes excel files, does some validation, fires off some SSRS reports which produce excel files, and finally sends out emails to groups of people with the appropriate file attached.It's been working fine, until recently. Now, when it reaches the send mail task, it raises an error:
Error: An error occured with the following error message: "Could not load file or assembly 'System.web, Versio 4.0.0.0, culture=neautral, publickeytoken= b0f5f7f11d50a3a' or one of its dependancies. Not enough storage space is available to process this command. (Exception from HRESULT: 0x80070008)".
Further down the report comes
Microsoft.SqlServer.Dts.Tasks.SendMailRask.SendMailTask, Microsoft.SqlServer.SendMailTask, Version=11.0.0.0, culture=neutral, PublicKeyToken=89845dcd8080cc91
This process completes normally when run in Visual Studio. It fails when run from SQL Server Agent.SQL Server Agent is currently running under my user credentials.
View 14 Replies
View Related
Aug 18, 2015
I need to send a mail if a file exists or not. I have wrote the code below. I need to get a mail if file exist if not available then also I need to get a mail. where as for below code mail is coming for success or failure.
public void Main()
{
int a;
if (File.Exists(@"D:a.csv"))
{
Dts.TaskResult = (int)ScriptResults.Success;
[Code] .....
View 2 Replies
View Related
Oct 5, 2015
I would like to send an email in a SSIS Package.
I have an Execute SQL Task that saves the results in a variable such as, RecCounts.
I have a Send Mail Task with a message source of: [User::RecCounts]
However, when I run the package I get this error.
Error: Failed to lock variable "[User::RecCounts]" for read access with error 0xC0010001 "The variable cannot be found.
This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
View 4 Replies
View Related
Oct 13, 2015
I'm trying to put together an SSIS package that will look in one directory for 2 distinctly named .csv files. The files will then be loaded into 2 tables.
The first task I execute is a SQL Task that checks to see if the tables I'm loading the data into are empty. If the tables have data, the package stops executing. If they are empty, the package continues to execute.
What is the best way to send an email out from SSIS if the package stops on the first step?
View 10 Replies
View Related
Nov 28, 2007
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
View 7 Replies
View Related
Jan 19, 2007
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
View 4 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Sep 15, 2015
I am doing some ssis package development in my local machine. I have a requirement to send email the output.
I am developing in my local machine. Is it possible to configure SMTP configuration in my local system to receive the email in Gmail?
if yes, what all are the steps to be followed.
View 3 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Feb 27, 2007
Hello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
View 5 Replies
View Related
Oct 18, 2004
We have jobs running successfully on one server. The jobs incluce a send mail step as one of the steps. We migrated the DB to a new server. I also migrated the jobs. Now the job is failing. We are getting error with the send mail task.
The error says the stored procedure 'master.dbo.xp_smtp_sendmail' could not be found. I am not sure what is the problem. Please advise.
Thanks
Radhika
View 4 Replies
View Related
Nov 21, 2007
Hi All,
I want to use send mail task with multipal email address for that i have to use comm or ?
Thank You,
Aric
View 5 Replies
View Related
Feb 12, 2007
Hi There,
I have a task to send mail when the source file contains null values against id column.
I have set conditional split to split the null value rows to the different destination.Please help me how do i achieve this task when the source file contains null values against id column.
Thanks in Advance.
View 12 Replies
View Related
Jun 7, 2006
Hi,
I am using a Send Mail task to conclude the control flow at the load of each dimension.
My requirement is to put mail items like to,from,cc,subject etc. to be picked from a file.
The send mail task has an option of picking up the values from a file.But, I am not able to configure it properly it seems.
Can anyone suggest how to do it with a example.
Thanks in advance.
Regards,
Aman
View 2 Replies
View Related
Jul 25, 2006
Well I thought it should be easier but send mail task supports only windows authentication but i want to give different user id/password, is there any other way to do it except script?
Thanks
View 2 Replies
View Related
Dec 11, 2007
I am trying to use Send Mail Task to send an email.
In my package all that I have is a Send Mail Task
Settings:
General:
Name: Send Mail Task
Description: Send Mail Task
Mail:
SmtpConnection: SMTP Connection Manager
From: awm@company.com
To: awm@company.com
Cc: Blank
BCc: Blank
Subject: None
MessageSourceType: Direct Input
MessageSource: Testing
Priority: Normal
Attachments: Blank
Expressions:
Misc - Expression: Blank
SMTP Connection Manager Editor
Connection manager Information
Name: SMTP Connection Manager
SMTP Server: Tried both IP address and SMTP server name (mail.company.com)
Checked both windows authentication and SSL
Its simple I want my package to send an email. but it fails aagain and again.
Task Send Mail Task
Validation has started (2)
Validation is completed (2)
Start, 1:31:22 PM
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
Finished, 1:31:43 PM, Elapsed time: 00:00:21.359
Validation is completed
Start, 1:31:22 PM
Warning: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Finished, 1:31:43 PM, Elapsed time: 00:00:21.359
Can any body advice me on this?
View 3 Replies
View Related
Jul 12, 2006
Hi all,
I was trying to add a send mail task at the end of myPackage. When i run package, the send mail task alone fails but the rest of the package works out fine. the error i got goes like this....
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
could anyone tell me how to get around this? also tell me how shud i add a send mail task so that i can check myself if i went wrong somewhere when i added it to my package.
Thanks n regards
Praveen kumar Dayanithi
View 3 Replies
View Related
Apr 11, 2008
Has anyone actually used this task successfully?
Everytime I try to use this task I get a failure with the following message:
[Send Mail Task] Error: An error occurred with the following error message: "The operation has timed out.".
where would this task have timed out?
View 7 Replies
View Related
Jan 10, 2007
hello all,
I just created a very simple package in SQL 2005 using the Send Mail task - i made a connection manager & specified the Exchange server - and then ran the package and i got the below message: I am not sure what i did wrong since the message is pretty general. Anyone help would be very appreciated. Thanks
SSIS package "Test.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Test.dtsx" finished: Success.
View 1 Replies
View Related
Sep 20, 2006
I have a script task in which I check the size of a file.
If the size of a file is greater then 0 KB then I need to send this file as an attachment using send email task.
If size is equal to 0 KB then I don't want to send email at all.
In the script task, I have a flag(@sFileExists) which i set to true in case of size of file greater then 0 and false in other case.
I am using a precedance constraint (Expression : @sFileExists=true) and condition is logical AND.
After script task based on the condition (@sFileExists=true) I am using the send email task for sending the email.
But I am not receiving the email. Please sugest where I am wrong.
Please note that the send email task is working all-right separately.
View 1 Replies
View Related
Mar 10, 2008
Hello,
I have the following problem. I have a (Test-) package containing a task that deletes rows in a table. On Failure I implemented a Send Mail task that informs me about the output. Now the problem: If I run the package in BIDS on my client computer the mail is sent and I get it. The same is true if I run the package on BIDS on the Testserver where the package is stored. Also I get a mail when running the package as SQL Agent Job. But I never get a message when I simply execute the package from the Managament Studio. Then I get the error message: "The task Send Mail Task cannot run on this edition of Integration Services. It requires a higher level edition. " This is the same whether the package is stored in msdb or in the Filesystem. Does anyone know why this is the case or how I can get rid of this error?
thanks in advance
bob17
View 8 Replies
View Related
Aug 31, 2006
Hi,
I want send email if certain conditions are met (by send mail task)... if compnay records does not exists in some table (returns null)... not task failure.... how do I achieve this without using Script task?
does any one have an idea about it,
regards
View 5 Replies
View Related
