I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 RepliesI have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View Related
hi,
i need execute a store procedure of Informix from sql server integration services.
i use driver IBM informix provider 3.2 and have linked server Informix and use sql task for execute the procedure
it's posible??
I had the SP, I want to call in Script Task , had the Result set data value then I need pop up message box. So how can I call stored procedure result in message box in ssis script task using C#.
and I want to use SSIS -OLEDB connection.
Â
ConnectionManager cm;
System.Data.SqlClient.SqlConnection sqlConn;
System.Data.SqlClient.SqlCommand sqlComm;
cm = Dts.Connections["OLE_TEST_"];
sqlConn = (System.Data.SqlClient.SqlConnection)cm.AcquireConnection(Dts.Transaction);
sqlComm = new System.Data.SqlClient.SqlCommand("Exec dbo.sOp_xx_XXXe_VXX 280", sqlConn);
sqlComm.ExecuteNonQuery();
above code , no message box.
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:Â Â . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.
Dan
I created a simple SQL Task in SSIS.
Connection is ADO.Net
SQL Statement is SELECT 10 AS NumberVar
ResultSet is set to single row
But when executing task I always get error message:
[Task 'SQL ausführen'] Fehler: Die zurückgegebene Anzahl von Ergebnisbindungen ist für 'ResultSetType' ungültig: 'ResultSetType_SingleRow'.
In English something like returned number of bindings is not valid.
This is for SSIS 2008r2. I am generating flat files successfully with a datetime stamp (filename_yyyymmddhhmm). Now I need to append a MAX(FILEDATE) from the file. I have a query to do this, but am not sure about two things:
1) Is it advised to put the query in a Script Task (with db conn and so forth) or is it better to put it in an Execute SQL Task? I am thinking the latter but am not 100% sure.
2) How would I pass the result of this query (yyyymm) to the filename. The filename format would be (filename_yyyymm). I am assuming that I would probably need to pass the result into a variable/expression but am not quite sure of the steps involved.
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
View 13 Replies View Relatedin a SSIS 2012 pkg, I'm trying to specify a SELECT TOP ? myColumn FROM myTable inside an Execute SQL task, but unsuccessfully.Is it possible to parameterize the TOP clause?
View 6 Replies View Relatedwhile i am trying to unzip files using execute process task ,getting below error
[Execute Process Task] Error: In Executing "C:Program Files7-Zip7z.exe" "a -tzip D:excel.zip D:unzipfileexcel.xls" at "", The process exit code was "1" while the expected was "0".
Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. Â The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i want to know more about unzip and zip files and folders using execute process task.
zip folder: Â C:Program Files7-Zip7z.exe
SQL version:Â SQL server 2008 R2
do not having win rar so please instruct using 7z.its quite interest to work but i don't know to get desired result.
I am trying to do robocopy of files from one server to another using SSIS package in order to automate and schedule the task.
So, int the Execute Process task editor I put the following
Executable:Â C:WindowsSystem32Robocopy.exe
Arguments:Â robocopy SourceServerNameE$BackupTestSource DestinationServerNameE$BackupTestDest
TestSource and TestDest are folder names,
And I want all the files in the source folder to be copied to the destination folder.
I am getting this error when I execute the task:Â The process exit code was "16" while the expected was "0"
How to capture execute sql task results.
Example if the execute sql task runs select statment (select * from table)means , how do i capture into sql table.
I have tried to incorporate 638 lines sql code inside the Execute SQL Task editor. But it is truncating the codes inside the Execute SQL Task (SQL command) in SSIS.write all 639 lines of codes in the Execute SQL Task Editor in SSIS.
View 7 Replies View RelatedIS that possible to get teh output of a execute sql task to excel destination.I have query which will comapre the data difference between two databses. It will comapre all tables in both databses and list out the difference in data by each table. I need to run this query using SSIS and need to get the output to a excel sheet...I have used the data flow task to run this query but my query is giving some error when used with data flow task. So i have used excecute sql task and need to write teh out put to a excel sheet.
View 11 Replies View RelatedGot a powershell script to split a large XML file to split in smaller chunks. I have Execute ProcessTask in SSIS with:Â
Executable: %windir%system32WindowsPowerShellv1.0powershell.exe
argument:Â -ExecutionPolicy ByPass -command ". 'C:WorkspacesSplitToytPMFile.ps1'"
I need to pass File Name as parameter to the PS script. I tried using the StandardInputVariable but it doesn't work.Â
I'm using a DateTime variable in SSIS 2008 that is used to set the SQLStatement property of an Execute SQL Task.
"DELETE FROM Labor WHERE Week = '" + (DT_WSTR, 100) @[User::Week] + "'"
Week is the next Sunday:
DATEADD( "day", @[User::DaysTillSunday] , @[User::TheDayThatIsTwentyMinutesPrior] )
DaysTillSunday:
DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] ) == 1 ? 0 : 8 - DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] )
TheDayThatIsTwentyMinutesPrior:
(DT_DATE)(DT_DBDATE)DATEADD("minute",-20,GETDATE())
The SSIS Package deletes the current week's data, reloads it with fresh data, then calculates the difference between the current week and last week.
The problem is that randomly, instead of deleting the current week, it will delete the previous week. This happens maybe 5-10% of the time. At least it does until I rebuild the package and import it into SQL Server again.
I'm guessing that the Execute SQL Task is not updating the value of the Week variable before it executes. I started with the source type being a variable. Then I decided to try Direct input and pass in the Week as a parameter (OLE DB Connection Type). That didn't work either.
Most recently I tried writing the Week variable to a table first, then having a sequence container with all the tasks second. Slightly better but I still saw the date was wrong 2 times in about 90 executions. I was hoping that writing the Week variable out to the database would force an update of any associated connections to it, but that didn't seem to work.
I have created for each container to call all the packages in a folder like below, also created a variable.
Then I add execute package task inside of foreach container and selected file system in a location and in connection called currently creating package name finally in connection properties i added variable in expression which i created and mapped into for each loop container. I referred below linkÂ
[URL] ....
All the packages are running but its not ending once all the packages executed its re run and continue the running process, how to stop once all the packages execute.Â
I have an execute process task set up to run ftp.exe and a script argument. Â The ftp.exe is referenced in the executable field without a qualified path. Â The package just seems to know it's there relatively. Â I need to change this to run a secured ftp executable that I recently installed on my pc. Â I put the new executable in the WindowsSystem32 folder where the old ftp.exe is stored. Â But when I put the new executable in the executable field, it says the 'File/Process "FTPS.exe" is not in path'. Â I get the same error when I fully qualify the path. Â Is there something I need to do with the new executable for SSIS to pick it up without having to fully qualify the path?
View 8 Replies View RelatedIn my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task? Â
View 9 Replies View RelatedHave an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.Â
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
I'm trying to put together an SSIS package that will look in one directory for 2 distinctly named .csv files. The files will then be loaded into 2 tables.Â
The first task I execute is a SQL Task that checks to see if the tables I'm loading the data into are empty. If the tables have data, the package stops executing. If they are empty, the package continues to execute.
What is the best way to send an email out from SSIS if the package stops on the first step?Â
There is one SP with parameters varchar, int, varchar and int. It runs perfect in SSMS. Now, I've moved into a Execute SQL task with four IN parameters. In parameter mapping, data type is varchar, long, varchar, long and parameter name is 0,1,2,3. It worked before which is great. Today, I opened this pkg for another testing but failed with the following error:failed with the following error: "Incorrect syntax near ';'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,parameters not set correctly, or connection not established correctly.
I know SP is fine as tested in SSMS.  I could not understand where it could go wrong in the ssis package. Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,
1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.
2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername
and database name.
2a) Â Within the for each loop, i have an execute process task that is configured as
 i) Executable:  C:WindowsSystem32WindowsPowerShellv1.0powershell.exe
 ii) Arguments:  Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
      Â
Note:  @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,
param([String]$Server_Name,[String]$Database_Name)
$Server = $Server_Name
$Database = $Database_Name
$savePath = "SalesDepartmentsData ScienceUsersSANDEEP PStoredProcedures_Backup"
[code]...
When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
I have a dts package that is essentially three transformation tasks that creates 3 text files. The transform data is accomplished through an sql query. Before I execute the transform tasks I would like to peform a couple of simple existence checks to verify data: i.e,
if exists (select * from table where week_ending = endoflastweek(getdate())
I could put the statement into the sql (if exists, begin/end) of each of the transformation tasks and prevent the process from executing, but it would be easier to put it into an "execute sql task" and if it succeeds, fail the task or make some kind of declaration not to proceed. I'm not sure how to do this...I know this can be done with an activeX script,
Main = DTSTaskExecResult_Failure
Is there a way to do this in an execute sql task step?
Hi
Is it possible in my DTS Package to check if a stored procedure which I'm executing from the Execute sql task icon can be tested for failure?
Dear all!
I have a SSIS packet. I declare a parameter that have scope of packet. I want to pass this parameter into a stored procedure and call this stored procedure from "Execute SQL Task".
Please help me how to call stored procedure with parameter from "Execute SQL Task".
Thank you very much
Hi ,
I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.
i am using the oledb connection
but i am getting the following error
[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
i tried with ado.net connection by directly giving the parameter names.
it will create a table but the the table name is something different from what i specified
Please do help as soon as possible
Thanks
Manish
Why does the Execute Package Task in SSIS always fail when set to execute in-process?
Having ExecuteOutOfProcess = False always results in that the package fails when run from within BI Studio.
I have also tried it from Command Line using dtexec., same results.
The problem with setting ExecuteOutOfProcess = True all the the time and running from within Bi Studio is that an enourmous amount of processes is created, none of which die because SSIS runs in Debug mode, another problem which is there doesn't seem to be a way to run it in Release mode so as not to get so many Dtexec processes, which ultimately results in having the Server die.
By Dying I mean, thrashing of the CPU & Memory. Page file to extreme limits.
And yes, the hardware should be able to take much more than what SSIS is supposed to eat. Dual 3GHz Xeon & 4GB of Ram.
Thank you.
My kind regards,
Eng. Ahmad Alkilani
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John