Integration Services :: Tell A Package To Stop Executing On Failure
Sep 8, 2015
I am using SQL Server 2012 SP1. I have built an SSIS package that imports flat file data from various files to SQL Server. I have got it to do everything I want it to do when things are going well, and am now on what I want it to do when it encounters a failure executing specific tasks and containers. For example, I have a Foreach Loop container that executes a dedicated stored procedure for each csv file in the target folder. If any of the store procedures fail to run for any reason I want to carry out certain actions.
For the most part I think I will be fine using the Event Handlers. What I can't seem to find is how to tell the package to stop executing on a Failure event after carrying out the actions defined by the relevant Event Handler. Or, perhaps it isn't necessary as that would be the default behaviour on a failure?
View 2 Replies
ADVERTISEMENT
Jul 31, 2015
I have a sql agent job which runs the Masterpackage, Master package has aroung 35 child packages calling in it. Issue with this Master package is it running upto 30 child packages and I get success message on job. It is not executing packages beyond 30 what could be the problem. I disabled the all the 30 child packages and ran it again it ran those other 5 child packges without any problem.
View 2 Replies
View Related
Jun 11, 2015
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
SELECT @cmd = 'dtexec /FILE "D:Program FilesMicrosoft SQL Server100DTSPackages.....PopulateReport.dtsx"'
SELECT @cmd = @cmd + ' /Decrypt T@!0er '
SELECT @cmd = @cmd + ' /set package.variables[vAppID].Value;' + CONVERT(VARCHAR(10),@appId)
SELECT @cmd = @cmd + ' /set package.variables[vDBName].Value;' + '"' + @db + '"'
SELECT @cmd = @cmd + ' /set package.variables[vBuildMFF].Value;' + CONVERT(VARCHAR(10),@BuildMFF)
[code]....
View 6 Replies
View Related
Aug 20, 2015
I am looking for solution for "Communication link failure" since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
SQL server 2008 R2 Enterprise Edition and error description is below,
Started: 6:22:40 AM Error: 2015-08-19 18:50:32.70 Code: 0xC0202009
Source: Data Flow Task Lookup [193]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
[Code] ....
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
Oct 9, 2015
I want to achieve the following in (SSIS/SSDT for SQL 2012) -
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
View 8 Replies
View Related
May 30, 2006
Hi All,
I am trying to execute a package (programmatically) that is stored on my local disk using the information that is provided on the following page:
http://msdn2.microsoft.com/en-us/library/ms136090.aspx
This means, I am using the Application object and the Package object to actually load the package using the path to it.
So my code looks something like this:
-----
pkgLocation = @"<package_path>/Package1.dtsx";
app = new Application();
pkg = app.LoadPackage(pkgLocation, null);
pkgResults = pkg.Execute();
Console.WriteLine(pkgResults.ToString());
Console.ReadKey();
---
My package reads in a flat file (located on another server) and transforms it and saves it to a database (on that same server). And mind you, I can execute this package just fine when I do it manually from within BIDS.
But when I try to execute the above mentioned code in my C# solution (compiled to a command line executable), I always get a "Failure".
Can somebody point out what I am doing wrong here?
Thank you in advance,
Manan Pancholi
View 3 Replies
View Related
Apr 7, 2008
Hi everybody,
I'm newby in SSIS. I have been using DTS in SQL 2000.
Trying to learn how to execute SSIS package from C# code of ASP.NET web server.
Here's my case:
1. SSIS package with simple data transformation from one table to CSV is stored in SQL Server 2005 storage
2. CSV is for simplicity placed in C: .txt
3. I haven't used SSIS configuration files
4. Protection level of package = EncryptSensitiveWithUserKey
5. Executes OK from Bussiness inteligence studio
6. I've created console application with this code:
...
sqlServeruser = "sa"
...
Package package = app.LoadFromSqlServer("Export_vw_TestConsumerPerson", sqlServer, sqlServerUser, sqlServerPassword, null);
DTSExecResult result = package.Execute();
Console.WriteLine("Package Execution results: {0}",result.ToString());
...
7. When I connect through Remote Desktop Connection I successfully execute this console application on SQL server host machine.
8. When I try execution from computer where I develop package and where I successfully executed it from Bussiness inteligence studio I'm geting FAILURE was a result
Connection params for SQL are same in console application and in SSIS project of Bussiness inteligence studio.
Thanks for any hints
Sinisa
View 9 Replies
View Related
Oct 9, 2015
I am importing a .xlsx into at SQL Server 2014 table. I would like to import each row with an ID and stop at the notes that are listed at the bottom. Please see attached image. How do I tell my SSIS Data Task to stop importing at the first blank row?I never know how many rows of data I may have so I can not use a fixed row number to stop at.
View 4 Replies
View Related
Sep 23, 2006
I am importing a text file with a column (serial numbers) with alphanumeric data, some mixed and some only numeric. The very large values that are all numeric are being converted to exponential when I run it thru an import package in SQL Server Integration Services (2005)
Ex. 4110041233214321 --> 4110040000000000 (displays as 4.11E+15)
In the past I dealt with this by importing the text file into Excel and changing the format of the column to number. This works even when many of the values contain alpha characters. I am not sure how to accomplish this same thing without going thru Excel. If you have any ideas on this I would be happy to hear from you.
I am importing the text file into a sql table.
View 1 Replies
View Related
Apr 29, 2015
I created a SSIS package which loads CSV into database. The package is called in a C# console application which is set as scheduled task in a server. The problem I having is that the package hangs during validation stage: "Truncation may occur due to inserting data from data flow column "Reading Type" with a length of 50 to database column "ReadingType" with a length of 2."There is no problem loading same data from development machine.
View 5 Replies
View Related
Aug 12, 2015
I've developed SSIS package and able to Launch and Execute dtsx package using Web Service/Console application. If I run it from my local it has no issues. If I ask my client to run this web service it is throwing error "Unable to connect to remote server".
If I ask my client to directly run the package itself they get following error "AcquireConnection method call to the connection manager failed"...
Even after my client having SQL Server, Integrations Service and BIDS installed on his machine he gets the above error. How to set this up. SQL Sever Agent is not an option for us.
View 2 Replies
View Related
Sep 1, 2015
I'm currently looking at refactoring an existing, large SSIS 2012 implementation that consists of about 55 projects and 360+ packages. The ETL framework that is in use has a "main" control package that reads from a database table and determines which packages are ready to execute (based on some dependency logic) and then uses an Execute Process task within a loop that calls dtexec with the arguments: /C start Dtexec /SQL "Some Package Path" /SERVER "someserver"
This design allows the loop to execute a package and then immediately iterate because it doesn't wait for the package to respond (aka complete with a failure or success) so it can quickly kick off as many packages are ready to execute. A SQL Agent job is used to call this package every few minutes so that it can pick up any packages that have had their dependencies satisfied since the last execution and kick those off.It's a a clever design but has some problems such as decentralized exception handling (since the parent package is unaware of what is happening in the "asynchronous" dtexec calls.My biggest concern is that by executing packages, not with the Execute Package Task but with the Execute Process Task, and spinning up many dtexecs, the framework is not leveraging SSIS's ability to handle threading, memory consumption, etc. across all running packages and executables because it is simply unaware of them. It's essentially like using an Execute Package Task with the ExecuteOutOfProcess property set to true.
View 6 Replies
View Related
Jun 24, 2015
I have to execute a .bat file on a remote server (that is used to stop and start services of an appl). The remote server doesn't have SSIS,SSMS installed. I want to create a package on my desktop the uses Execute process task and execute the .bat file on the remote server and then schedule it using the SSMS.
View 14 Replies
View Related
May 4, 2015
I have a job that runs every 3 minutes. The email that I received said the job failed at 10:30 a.m. but when I run the "All executions report" I see a skip in the times from 10:27 to 10:33. That failed Job is not logged as an execution.I looked in the system event log and I do not see anything odd at that time.
View 2 Replies
View Related
Jul 29, 2015
I need to grab data from teradata(using odbc connection).. i have no issues if its just bunch of joins and wheres conditions.. but now i have a challenge. simple scenario, i have to create volatile table, dump data into this and then grab data from this volatile table. (Don't want to modify the query in such a way i don't have to use this volatile table.. its a pretty big query and i have no choice but create bunch of volatile tables, above scenarios is just mentioned on simple 1 volatile table ).
So i created a proc and trying to pass this string into teradata, not sure if it works.. what options i have.. (I dont have a leisure to create proc in terdata and get it executed when ever i want and then grab data from the table. )
View 2 Replies
View Related
Apr 22, 2015
The Database Trasnfer Task has failed with the following error......failed with the following error: "Invalid object name 'dbo.exampleViewName.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 9 Replies
View Related
May 11, 2015
Data flow A take data from the Excel File A, Data B from Excel File B, Data C from Excel File C. What I'd like to do is that if something goes wrong on Data Flow A I would be alerted but the package should continue to running. The same for the DataFlow B, if A it's ok go on, if B fail send me the mail but continue until the end (so running the Data Flow C).
View 2 Replies
View Related
Aug 20, 2015
Add-Type -AssemblyName "Microsoft.SqlServer.ManagedDTS, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
$ssisApplication = New-Object "Microsoft.SqlServer.Dts.Runtime.Application"
$ssisPackagePath = "c:users estdocumentsvisual studio 2012ProjectsSAP$SharePointSAP$SharePointPackage.dtsx"
$ssisPackage = $ssisApplication.LoadPackage($ssisPackagePath,$null)
$ssisPackage.Execute()
In case of command execution from project PowerShell SSIS, writes only Failure to what there can be a problem? From VS it is launched without problems.
View 2 Replies
View Related
May 21, 2007
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
View 4 Replies
View Related
May 11, 2015
i have created one package in production server called User_Import,It will fetch the info from excel file to the Sql table, I have executed this package in ssis console successfully,But i have to schedule one job using this package on daily basis for that i have created on sql job using this package, Then it is failing i dont know the exact problem,I have full access to my database and full access to the sql agent to exuete any jobs,I have sharing the error message which am getting in the sql agent level, Please find the error msg:
05/11/2015 15:10:20,User_Imports,Error,1,SFRFIDCSCDB003PSQCM03,User_Imports,AD_User Load,,Executed as user: SFRSA-SFR-SQCM-02. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 15:10:20 Error: 2015-05-11 15:10:20.41 Code: 0xC0011007 Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2015-05-11 15:10:20.41 Code: 0xC0011002 Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Failed to open package file "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ ImportsUser_ ImportsUser_ Imports.dtsx" because of error 0xC0011002.
Description: Failed to open package file "C:Userssccmadmin DocumentsVisual Studio 2008 Projects
User_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Started: 15:10:20 Finished: 15:10:20 Elapsed: 0.015 seconds. The package could not be found. The step failed.,00:00:00,0,0,,,,0
View 4 Replies
View Related
Aug 13, 2015
I have a package from SQL Server 2008 R2, that loads data from .xlsx file to database table.There are total 15 columns and 14000 rows in the .xlsx. The package runs fine in BIDS. But the same package in SQL Agent fails with error "omponent "Excel Source" (1)" failed validation and returned validation status "VS_ISBROKEN".
When I tried to run the package by deleting the half of the records for first 7000 rows it ran successfully in agent. Then the second half (last 7000 rows) also succeed from agent job. So, there is no issue with the data/datatypes.The agent job is able to run with record upyo 11000 rows in .xlsx. When I am running for 12000 rows it is failing.Is there any problem with the number of records in .xlsx or size through SQL Agent?
I am running the package from a Proxy account in sql agent job.
ERROR:
Error: Executed as user: PROXY_ID. Microsoft (R) SQL Server Execute Package Utility Version 10.50.6000.34 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 10:36:09 AM Error: 2015-08-10 10:36:10.87 Code: 0xC0202009 Source:
XX Connection manager "Excel Connection Manager 1"
[code]....
View 5 Replies
View Related
Jul 17, 2007
I'm trying to execute an SSIS package from an ASP.NET web page. Using some code from http://msdn2.microsoft.com/en-us/library/ms403355.aspx I have managed to get this working when executing a package that contains a stored procedure, however it does not work when there is an Analysis Services cube to build.
Here is my code for the webservice
Code Snippet
Public Class SCCBuildDW
Inherits System.Web.Services.WebService
' LaunchPackage Method Parameters:
' 1. sourceType: file, sql, dts
' 2. sourceLocation: file system folder, (none), logical folder
' 3. packageName: for file system, ".dtsx" extension is appended
_
Public Function LaunchPackage( _
ByVal sourceType As String, _
ByVal sourceLocation As String, _
ByVal packageName As String) As Integer 'DTSExecResult
Dim packagePath As String
Dim myPackage As Package
Dim integrationServices As New Application
' Combine path and file name.
packagePath = Path.Combine(sourceLocation, packageName)
Select Case sourceType
Case "file"
' Package is stored as a file.
' Add extension if not present.
If String.IsNullOrEmpty(Path.GetExtension(packagePath)) Then
packagePath = String.Concat(packagePath, ".dtsx")
End If
If File.Exists(packagePath) Then
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
Else
Throw New ApplicationException( _
"Invalid file location: " & packagePath)
End If
Case "sql"
' Package is stored in MSDB.
' Combine logical path and package name.
If integrationServices.ExistsOnSqlServer(packagePath, ".", String.Empty, String.Empty) Then
myPackage = integrationServices.LoadFromSqlServer( _
packageName, "(local)", String.Empty, String.Empty, Nothing)
Else
Throw New ApplicationException( _
"Invalid package name or location: " & packagePath)
End If
Case "dts"
' Package is managed by SSIS Package Store.
' Default logical paths are File System and MSDB.
If integrationServices.ExistsOnDtsServer(packagePath, ".") Then
myPackage = integrationServices.LoadFromDtsServer(packagePath, "localhost", Nothing)
Else
Throw New ApplicationException( _
"Invalid package name or location: " & packagePath)
End If
Case Else
Throw New ApplicationException( _
"Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'.")
End Select
Return myPackage.Execute()
End Function
End Class
This is the code from my page
Code Snippet
Protected Sub btnBuildDW_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnBuildDW.Click
ExecutePackage()
End Sub
Protected Sub ExecutePackage()
Dim launchPackageService As New SCCBuildDW.SCCBuildDW
Dim packageResult As Integer
Try
packageResult = launchPackageService.LaunchPackage("file", "c:ssis", "PackageTest")
Catch ex As Exception
' The type of exception returned by a Web service is:
' System.Web.Services.Protocols.SoapException
lblResult.Text = "The following exception occurred: " & ex.Message
End Try
lblResult.Text = CType(packageResult, PackageExecutionResult).ToString
' Console.ReadKey()
End Sub
Private Enum PackageExecutionResult
PackageSucceeded
PackageFailed
PackageCompleted
PackageWasCancelled
End Enum
I'm using windows authentication and impersonating an identity. The identity has access to the analysis services role but the package still fails to run.
Can anyone offer any help or advice on this?
Thanks
View 7 Replies
View Related
Jul 13, 2015
I'm executing Oracle procedure, which has three OUTPUT parameters and returns results in table type variable. i should not use ODBC, MSDAORA providers to call the procedure. So I'm planning to using Oracle OLEDB provider. I'm able to execute the procedure successfully, but when i do check (while dr.Read()) its not returning any records. But I know as per stored procedure results, it should return 66 records.
Dim conn As New OleDbConnection
Dim cmd As New OleDbCommand
Dim dr As OleDbDataReader
Dim QSQL As String
[code]...
View 10 Replies
View Related
Sep 8, 2015
I'm trying to execute a SSIS package via proxy user but I keep getting the following error message regardless of I have tried to do to fix it, I have done the following so far:-
1. Recreated the proxy user
2. Retyped the password, under credentials
Message : Unable to start execution of step 1 (reason: Error authenticating proxy "proxyname", system error: Logon failure: unknown user name or bad password.). The step failed.
View 3 Replies
View Related
Sep 1, 2015
Is there any differene between on-error event handler and precedence constrain failure? I have created a package and if a data flow task(flat file to DB) fails, the file has to be moved to archive folder. How I have accomplished this is Dataflow task->precedence constrain failed(red arrow)->execute process task to move the file to error folder and it worked,The same execute process task( to move the file to error folder) doesnot work when I move this to on-error event handler. Also, for the same file the on-error event is getting triggered multiple times.
View 4 Replies
View Related
Jul 9, 2015
in a my SSIS 2012 pkg I'm using a Foreach ADO Enumerator container that reads an object variable in order to get an id value.This identifier is passed as an input parameter to an Execute SQL task to update an Oracle table: if this task fails the id is written on a SQL Server table. After the Execute SQL task execution, with success or failure, the flow go to another task in the container.
When an error occurs for the update on Oracle table, each tasks inside the container are executed but the container fails and the loop ends.I'd like to complete the entire loop respect to the identifiers present in the object variable also if the update operation on Oracle table goes in error.
View 5 Replies
View Related
Apr 1, 2014
When running the etl I'm getting the error: <SSIS Task>: Shared Memory Provider: Timeout error [258] ; followed by the message "Communication link failure".
What is special about this message that it happens on a SQL Execute task (random task) and the Timeout is after 2 minutes.
When executing the packages separatly it is working fine. The SQL Tasks that are failing are also quit heavy, but reasonable and takes between >2min and 10 - 15 min. Statements are stored procedures that puts an index on 3 mil. records or update statements,...
I had a look to all my (SSIS-etl) timeouts and they have the default value 0, the "remote query timeout" of the server is set to 10 minutes. According to me, these are the only one that exists?
There are 2instances on the server each instance has 24GB allocated, the server has 64 in total. Also when the etl runs (that results in an error) no other etl is running on the 2 instances. I'm working with the oledb sql server native client11.0 provider : SQLNCLI11.1.
View 7 Replies
View Related
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Jul 7, 2015
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
View 3 Replies
View Related
Apr 28, 2015
I found a problem in the SQL that's a part of a SSIS package written by a third party, which is in our SQL Server 2008 R2 database. I've discussed this with the third party person; she's given me the necessary changes to the SQL. But I don't know what to do next.We've got this package on a test database server. I've got SSIS open to Stored Packages and have drilled down to the necessary folders to find it. But beyond that I don't know what to do. I understand that BIDS is involved, but that's as far as my understand of it goes.
View 3 Replies
View Related
Sep 10, 2015
We have a SQL 7 and there are 11 DTS Packages present and the creation date is 2007. How can I know that these DTS Packages are active? And if they are active, what is the best way to move it to SQL 2012.
View 3 Replies
View Related
Apr 23, 2015
I modified an existing package created by someone (who left the organization). Its a ftp bulk insert from flat files to the tables. The need was to updates 2 tables out of 9 with additional columns. I made the changes to the package and it runs successfully on my laptop.
After that I build the package and tested it on the development server, although the package runs successfully but the data is written to my DB tables in my laptop instead of development server DB tables!.I see "." in the place of the connection manager server name. The DB name is the same in all the three environment (local, development & production). There is a configuration table used in the package.
View 5 Replies
View Related
