Integration Services :: The Configuration Environment Variable Was Not Found

Jul 28, 2008

I have a Master Package that executes a number a child packages.
 
In my SSIS Package Configuration:
 
1.  I have an SSIS Configuation table that holds the connection string.
 
2.  An XML Configuration File with a setting of configuration location stored in an enviornmental variable.
 
3. And finally, an Eveniornmental variable with the setting of ProjectFolderAbsolutePath value, where it is the full path of the project folder.
 
The project functions normally but everytime I open it I get the following error.

" Warning loading MasterPackage.dtsx: The configuration environment variable was not found.  The environment variable was: "EnviorVariable". This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid."

View 5 Replies


ADVERTISEMENT

Integration Services :: Environment Variable In SSIS Not Being Recognized In JOB

Jun 16, 2015

I've created a SSIS Package and it's connection is based on Environment Variable(please seeprocedure).

Now, I'm trying to create a job that calls this package and it seems that when you view Data Sources, it still pointing to the old server.

But when you open-up the package through BIDS in the same server, it's using the new reference that I have specified in the environment variable (please refer to the first image).

I came across this blog with the same issues as mine. He suggested to re-start the SSIS Service which I already did  but nothing happens. I even re-started the SQL Agent but still no luck.

I'm not sure what else is missing except for re-starting the machine which is the last thing I want to do as this is PRODUCTION server.

View 7 Replies View Related

Package Configuration With Environment Variable

Aug 9, 2007

Hi,

I have issues with the Connection Manager in the SSIS package when using package configs thru environment variable.


Here goes..

SSIS package1:

Connections used: devcon1, devcon2 - Dev Env and testcon1,testcon2 - Test Env. Now using all four. Ideally either devcons or testcons should reside at a time.

Environment variable:

Pckg_config = <location of config file which has testcon1 and testcon2>


I need to use only devcon1 and devcon2 in Dev env. In test i need to use only testcon1 and testcon2
Hence i set the values of devcons in devEnv.dtsconfig and testcons in testEnv.dtsconfig


Now i remove both testcons from ssis package. If i try to run the Test Env and my testcons which are marked in testenv.dtsconfig are not found as connections in ssis package then the ssis gives error wanting for those connections.


SSIS maintains the connections in the Connection Manager per package. Although internally it is a pool of connections.


Ideally i should be able to play around with the connection at run time. My package now works, if it is deployed with all the devcons and testcons together. However, ideally it should be either devcons or testcons. I am trying to be more explicable to reach to the masses here.


Am i doing something wrong? All your efforts in solving this puzzle will be greatly appreciated. Please participate.


Thanx,Tushar

View 4 Replies View Related

Package Configuration Using Environment Variable

Jun 28, 2007

I am doing SSIS package configuration using environment variable.



I have created a system environment variable that points to the dtsConfig file.



I opened the package and choosen the configuration type as environment variable and specified the environment variable



When I click the next button , it doesn't allow me to choose the configurable property.



Please suggest

View 1 Replies View Related

Package Configuration + Environment Variable

Jul 17, 2006

We are using Package configuration with environment variables. The problem we are having that if we try to open project from other PC (PC 2) it gives the error:

Error 1 Error loading F0005.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. z:visual studio 2005projectssales data martextract to staging areaF0005.dtsx 1 1

We are using environment variable named DWConfig and have configured correct path in each PC. If we edit package configuration in PC 2 and go thru the same procedures without any amendments the errors is removed for that PC and if, again we OPEN that project in PC 1 it gives same error and if we go thru package configuration wizard again error is removed.

Can any one tell me is there any solution of that problem?


Note: Our project is saved on server (neither PC 1 nor PC 2)

regards,

Anas.

View 4 Replies View Related

Environment Variable Package Configuration

Dec 17, 2007



Okay - this one is driving me batty.


I have a package that uses an environment variable package configuration of value X for a connection string. I close BIDS. I change the value of the environment variable to value Y. I open BIDS and the package, and the value of my connection string is Y. I save my package with the new configuration. if I look at the dtsx file, I see connection string with value Y. All as expected.


I move the package to my server (I've tried Import package from SSMS, using the deployment manifest, and save copy as). On the server, the environment variable is set to value Y. If I run the package or export it; however, the value of my connection string is X!


Does anyone have any suggestions of things to try or some reason that this is not working?


Thanks,
Jessica

View 6 Replies View Related

Package Configuration Type - Environment Variable

Feb 19, 2008

Hello All -



Have you ever seen the error message below?



Description: The package path referenced an object that cannot be found: "Package.Variables[User::<variable_name>].Properties[Value]". This occurs when an attempt is made to resolve a package path to an object that cannot be found. End Warning Could not load package "<package_name>" because of error 0xC0010014.



Basically, I create a package variable under my User Namespace and this variable will tell what server the SSIS is running at. We first create a system variable locally and the SQL Server will have a variable with exactly the same name so that the server name will be evaluated through the package variable/package configurations when the SSIS is executing from a SQL Server job.



This way we do not hard code the server name... We always succeeded on doing that with DTS as well as SSIS packages but just now my package is running into this issue...



Since I did not change ANYTHING in the package, I am guessing this is not programming related and that something was changed in the server. However, the DBA was helpless over here and I have no clue of what this error means.



Any help would be appreciated.



Thanks, Gabriel.

View 14 Replies View Related

SSIS Dynamic Configuration - Environment Variable Problem

Aug 24, 2007

Dear all,

I have a problem with SSIS reading an environment variable after deploying the packages to a server. I explain.

I have an Parent Packages ETL_MAIN_PACKAGE.dtsx that reads the child packages from a record set and loops on it to execute them with the Execute Package Task task. The first child package to be executed is called DIM_PERIODIC.dtsx.

On my local machine, the Parent Package is configured to read its database connections from an XML file SSIS_configfile.config located on my C: drive. The path (C:SSIS_configfile.config) to this file is stored in the environment variable BI_ETL.

When I run the Parent Package inside SSIS only machine, the connections are read and the package executes perfectly. Now, I want to deploy the packages on our server.

I copied the XML configuration file to the server C drive, I created the same environment variable BI_ETL and set its value to C:SSIS_configfile.config and I rebooted the machine (in case).

The execution of the Parent package is managed by a stored procedure. I use xp_cmdshell command. The command line generated is :


cmd.exe /c dtexec /file "C:ETL_DeploymentETL_MAIN_PACKAGE.dtsx" /CHECKPOINTING OFF /MAXCONCURRENT " -1 " /SET Package.Variables["P_PACKAGE_PATH"].Value;"C:ETL_Deployment" /SET Package.Variables["P_LOOKUP_PATH"].Value;"C:ETL_DeploymentETL_LOGS" /SET Package.Variables["P_SCHOOL_CODE"].Value;"007"

This command generates an error telling that the Environment variable is not found and it throws this error:

Error : 2007-08-23 18:59:10.25
Code : 0x80019003
Sourse : The configuration environment variable was not found. The environment variable was: BI_ETL. This occurs when a package specifies an environment variable for a configuration setting but it cannot be found. Check the configurations collection in the package and verify that the specified environment variable is available and valid.
End Error


Error: 2007-08-23 18:59:10.25

Code: 0xC001401E

Source: ETL_MAIN_PACKAGE Connection manager "Package Path Execute"

Description: The file name "C:ETL_Deployment" /SET Package.Variables[P_LOOKUP_PATH].Value;C:ETL_DeploymentETL_LOGSDIM_PERIODIC.dtsx" specified in the connection was not valid.

End Error

I run the package on the same server with a command line directly in a DOS window:


C:>cmd.exe /c dtexec /file "C:ETL_DeploymentETL_MAIN_PACKAGE.dtsx" /CHECKPOINTING OFF /MAXCONCURRENT " -1 " /SET Package.Variables["P_PACKAGE_PATH"].Value;"
C:ETL_Deployment" /SET Package.Variables["P_LOOKUP_PATH"].Value;"C:ETL_Deplo
ymentETL_LOGS" /SET Package.Variables["P_SCHOOL_CODE"].Value;"007"


I don't have anymore the error saying that the Environment variable is not found, but I still have the same second error :


Error: 2007-08-23 18:59:10.25

Code: 0xC001401E

Source: ETL_MAIN_PACKAGE Connection manager "Package Path Execute"

Description: The file name "C:ETL_Deployment" /SET Package.Variables[P_LOOKUP_PATH].Value;C:ETL_DeploymentETL_LOGSDIM_PERIODIC.dtsx" specified in the connection was not valid.

End Error

I conclude that the environment variable is not read at all.

Does anybody have an idea on how to solve this problem ?

Many thanks.

Sami



View 10 Replies View Related

Relational DB/Analysis Services Configuration For Multi-proc Environment

Oct 19, 2006

Hello--

Is it possible to install/configure SQL-Server 2005 on a multi-processor machine so that the relational DB utilizes a given subset of processors while Analysis Services utilizes another subset?

Thanks,

- Paul

View 4 Replies View Related

Integration Services :: Environment Not Available In Job Step?

May 12, 2015

I have created an environment in the SSIS catalog and created an SSIS job step using a package in the catalog that has the configuration. In the configuration tab of the job the environment checkbox is grayed out and I am not able to check it to use the environment created and associated with the project. What am I missing?

View 2 Replies View Related

SharePoint Reporting Services Integration 'Execution ... Cannot Be Found'

Aug 6, 2007

I have setup the Sharepoint 2007 Reporting Services add-in and am running into an issue. I was able to get a report to show up in a report viewer webpart once, but after that, I receive a message similiar to the following (for all reports);

'Execution 'ex2ubmetmr13vdffxciursfg' cannot be found '


Any help would be appreicated. I'm including my log file for the error as well as it should be helpful.

<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>Mountain Daylight Time</TimeZone>
<Path>c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServer__08_06_2007_12_33_12.log</Path>
<SystemName>DEV-AD-V2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!webserver!6!8/6/2007-12:33:14:: i INFO: Reporting Web Server started
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!6!8/6/2007-12:33:14:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!6!8/6/2007-12:33:15:: i INFO: Evaluation copy: 0 days left
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!6!8/6/2007-12:33:17:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!6!08/06/2007-12:33:18:: Call to GetItemTypeAction(/).
w3wp!library!6!08/06/2007-12:33:18:: i INFO: Catalog SQL Server Edition = Enterprise
w3wp!library!6!08/06/2007-12:33:20:: Call to ListParentsAction(/).
w3wp!library!6!08/06/2007-12:33:20:: Call to ListChildrenAction(/, False).
w3wp!library!6!08/06/2007-12:33:22:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:22:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:22:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:28:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:28:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:28:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!library!6!08/06/2007-12:33:29:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!security!6!08/06/2007-12:33:29:: i INFO: Exception while running with elevated privileges
w3wp!security!6!08/06/2007-12:33:29:: i INFO: The permissions granted to user 'DEV1Administrator' are insufficient for performing this operation.
w3wp!webserver!6!08/06/2007-12:33:29:: i INFO: Processed folder '/'
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!9!08/06/2007-12:37:33:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!9!08/06/2007-12:37:34:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!9!08/06/2007-12:39:28:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!9!08/06/2007-12:40:18:: Call to GetSystemPropertiesAction().
w3wp!library!9!08/06/2007-12:40:18:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!9!08/06/2007-12:40:26:: i INFO: Call to RenderFirst( 'http://DEV-ad-v2/Test Reports/Report1.rdl' )
w3wp!library!9!08/06/2007-12:40:29:: Using folder c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesRSTempFiles for temporary files.
w3wp!webserver!9!08/06/2007-12:40:30:: i INFO: Processed report. Report='http://DEV-ad-v2/Test Reports/Report1.rdl', Stream=''
w3wp!library!9!8/6/2007-12:43:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!8/6/2007-12:53:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!9!08/06/2007-12:59:05:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:06:: Call to CreateFolderAction(Reports, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:08:: Call to CreateFolderAction(Report%20Project3, http://DEV-ad-v2/Shared Documents/Reports).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources).
w3wp!library!6!08/06/2007-12:59:09:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:09:: Call to CreateFolderAction(Data%20Sources, http://DEV-ad-v2/Shared Documents).
w3wp!library!6!08/06/2007-12:59:10:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Data Sources/EDR.rsds).
w3wp!library!6!08/06/2007-12:59:10:: Call to CreateDataSourceAction(EDR.rsds, http://DEV-ad-v2/Shared Documents/Data Sources, True).
w3wp!library!6!08/06/2007-12:59:15:: Call to GetItemTypeAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-12:59:15:: Call to CreateReportAction(Report1.rdl, http://DEV-ad-v2/Shared Documents/Reports/Report Project3, True).
w3wp!library!6!08/06/2007-12:59:18:: Call to SetItemDataSourcesAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:46:: Call to ListParentsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!library!6!08/06/2007-13:02:49:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:02:50:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:02:50:: Call to GetPermissionsAction(http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl).
w3wp!session!6!08/06/2007-13:02:56:: i INFO: LoadSnapshot: Item with session: kabqahahtxbdrgqfqza3zf45, reportPath: http://DEV-ad-v2/Shared Documents/Reports/Report Project3/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:02:56:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
w3wp!webserver!6!08/06/2007-13:02:56:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'kabqahahtxbdrgqfqza3zf45' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:06:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:06:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:07:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:03:10:: i INFO: LoadSnapshot: Item with session: dpeedqvwmpr3z155qsu54m55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:10:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:10:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'dpeedqvwmpr3z155qsu54m55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:03:17:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:03:17:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!library!6!8/6/2007-13:03:17:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams
w3wp!session!6!08/06/2007-13:03:21:: i INFO: LoadSnapshot: Item with session: gn34sn55qxkdwi55k2fm4y55, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:03:21:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
w3wp!webserver!6!08/06/2007-13:03:21:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'gn34sn55qxkdwi55k2fm4y55' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:53:: Call to ListParentsAction(http://DEV-ad-v2/mySites).
w3wp!library!6!08/06/2007-13:03:54:: Call to ListChildrenAction(http://DEV-ad-v2/mySites, False).
w3wp!webserver!6!08/06/2007-13:03:55:: i INFO: Processed folder 'http://DEV-ad-v2/mySites'
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:04:12:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:04:12:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:04:23:: i INFO: LoadSnapshot: Item with session: s5oz5evzesse5cugbxxu1wy3, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:04:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
w3wp!webserver!6!08/06/2007-13:04:23:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 's5oz5evzesse5cugbxxu1wy3' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2).
w3wp!library!6!08/06/2007-13:09:54:: Call to GetSystemPropertiesAction().
w3wp!library!6!08/06/2007-13:09:54:: Call to GetPermissionsAction(http://DEV-ad-v2/Test Reports/Report1.rdl).
w3wp!session!6!08/06/2007-13:09:57:: i INFO: LoadSnapshot: Item with session: ex2ubmetmr13vdffxciursfg, reportPath: http://DEV-ad-v2/Test Reports/Report1.rdl, userName: SHAREPOINTsystem not found in the database
w3wp!library!6!08/06/2007-13:09:57:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found, ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
w3wp!webserver!6!08/06/2007-13:09:57:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ExecutionNotFoundException: Execution 'ex2ubmetmr13vdffxciursfg' cannot be found
at Microsoft.ReportingServices.WebServer.HttpClientRequest.InitForRequest(CatalogItemContext context, UserContext userCtx)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderItem(ItemType itemType)
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent()
at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage()
w3wp!library!6!8/6/2007-13:13:17:: i INFO: Cleaned 0 batch records, 0 policies, 2 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams


Thank you,

John

View 2 Replies View Related

Integration Services :: SSIS Execute Process Task Executable Not Found

Jul 10, 2015

I have an execute process task set up to run ftp.exe and a script argument.  The ftp.exe is referenced in the executable field without a qualified path.  The package just seems to know it's there relatively.  I need to change this to run a secured ftp executable that I recently installed on my pc.  I put the new executable in the WindowsSystem32 folder where the old ftp.exe is stored.  But when I put the new executable in the executable field, it says the 'File/Process "FTPS.exe" is not in path'.  I get the same error when I fully qualify the path.  Is there something I need to do with the new executable for SSIS to pick it up without having to fully qualify the path?

View 8 Replies View Related

Integration Services :: Variable Value Does Not Fit Variable Type

May 27, 2015

I have an SSIS package that creates a csv file based on a execute sql task.

The sql is incredibly simple select singlecolumn from table.

In the properties of the execute sql task I specify the result set as "full result set" when I run it I get the error that: Error:

The type of the value being assigned to variable "User::CSVoutput" differs from the current variable type.

Variables may not change type during execution. Variable types are strict, except for variables of type Object.

If I change the resultset to single row then I only get the first row from the DB (same if I choose none), If I choose XML then I get the error that the result is not xml. What resultset type do I need to choose in order to get all the rows into the CSV? The variable I am populating is of type string and is User::CSVoutput

View 8 Replies View Related

How Do I Use SendMail Option In The Integration Services - I Found The Code On MSDN, But, How Do I Make It Workable?

May 14, 2007

if I have the following code:


using Microsoft.SqlServer.Dts.Runtime;
using Microsoft.SqlServer.Dts.Tasks.SendMailTask;

class TestSendMailTask
{

public static void Main()
{

Package pkg = new Package();

ConnectionManager smtpCM;
smtpCM = pkg.Connections.Add("SMTP");
smtpCM.Name = "SMTP Connection Manager";
smtpCM.ConnectionString = "smtphost";

Executable exe = pkg.Executables.Add("STOCKendMailTask");
TaskHost thSendMailTask = (TaskHost)exe;
{
thSendMailTask.Properties["SmtpConnection"].SetValue(thSendMailTask, "SMTP Connection Manager");
thSendMailTask.Properties["ToLine"].SetValue(thSendMailTask, "someone1@example.com");
thSendMailTask.Properties["CCLine"].SetValue(thSendMailTask, "someone2@example.com");
thSendMailTask.Properties["BCCLine"].SetValue(thSendMailTask, "someone3@example.com");
thSendMailTask.Properties["FromLine"].SetValue(thSendMailTask, "someone4@example.com");
thSendMailTask.Properties["Priority"].SetValue(thSendMailTask, MailPriority.Normal);
thSendMailTask.Properties["FileAttachments"].SetValue(thSendMailTask, "C:\test_image.jpg");
thSendMailTask.Properties["Subject"].SetValue(thSendMailTask, "Testing the SendMail Task");
thSendMailTask.Properties["MessageSourceType"].SetValue(thSendMailTask, SendMailMessageSourceType.DirectInput);
thSendMailTask.Properties["MessageSource"].SetValue(thSendMailTask, "This is only a test.");
}

DTSExecResult valResults = pkg.Validate(pkg.Connections, pkg.Variables, null, null);

if (valResults == DTSExecResult.Success)
{
pkg.Execute();
}

}

}



-------

How do I make it a workable package so it compiles , w/ javadoc style comments and instructions, so, other people can use it?

View 20 Replies View Related

Integration Services :: SSIS 2012 Script Component Binary Code Not Found

Apr 21, 2015

After adding Service Reference  to WebService, the Script Component has Binary Code not found, red circle not showing these are the steps I followed:

1) Add Script Component as Source
2) Add 3 x Output Columns Col1,2 and 3
3) Add HTTP Connection URL>..Binary Code not found, red circle showing
4) Add test code to Sub CreateNewOutputRows     Dim i As Integer = 6       Binary Code not found, red circle not showing
5) Add Service Reference URL...Binary Code not found, red circle showing again

Should just adding Service Reference cause Binary Code not found, red circle to appear. I have to set  precompilescripttobinary option , however cannot see this option in 2012

View 3 Replies View Related

Integration Services :: Package XML Configuration File Once Checked Into TFS

Jul 29, 2015

I've used XML package configuration in my packages in order to populate key variables. The configuration String is pointing to a local folder in my machine. After that, I've checked my whole solution into TFS.  I did check the checked in file but could not find the .dtsConfig XML file.  The problem occurs when the other teammate checked out this solution from TFS into his own box. When he tried to open the solution, it gives warning (not error though) saying it could not find the package configuration file.machine does not have the same URL I had in my  box.   In situation like this, how can we fix in the multi-developers SSIS environment?

View 2 Replies View Related

Integration Services :: Master SSIS Package Which Will Have Configuration

Sep 1, 2015

We have 6  SSIS packages which populates different sets of table by reading different set of excel file.We need to have a master SSIS package which will have the configuration (say xml) which consists of database connection details and file path details of child packages.what will the best way to achieve the desire results.

Package 1 use File x
package 2  use File y
package 3 use File z
....
package 6 use File a

The parent ssis package will have xml file as configuration which will store the all the six different file details for child packages along with database connection string.Is the above option feasible . or what approach will be the best possible way to achieve the results.Since the Triggering of SSIS package (Master SSIS package) will be from SQL Job

View 6 Replies View Related

Integration Services :: XML Configuration Only For File System Deployment?

Nov 3, 2015

We deployed the ssis package to SQL server and now trying to configure but it only allow use to change environmental variables there is no option to browse and select XML configuration file. Does this mean when you  are using SQL server deployment mode u can only use environmental variable ?

View 3 Replies View Related

Integration Services :: Error - Configuration System Failed To Initialize

Sep 8, 2015

When I boot my computer (Windows Home Premium 64bit) there is a pop up that says "Configuration System failed to initialize" and I don't know what might cause this..

View 2 Replies View Related

Integration Services :: Update Value Of Variable

Apr 20, 2015

We are using SSIS 2008 . A variable abc has been defined with sql script Select firstName,LastName from Employee.I need to edit the variable and add a where condition like SELECT firstName,lastName FROM employee where Name like '%Fr%' I tried to replace it with new script and saved also but when i ran the package it was still using the old sql script .

View 4 Replies View Related

Integration Services :: SSIS Package Configuration Option Resets When Collapsing / Expanding Options Tree

Oct 22, 2014

On Visual Studio 2013 with SSDT for SQL Server 2014

I noticed something very strange.

I am viewing the package configuration selected option for a package:

Now, i just click on the - sign and then on the plus sign on the "Properties" branch. And the option is cleared:

The ONLY way i found not to mess everything is just to have ALL the options FULL expanded and THEN to select what i want.

View 4 Replies View Related

Integration Services :: End Of Year Expression In Variable

Aug 4, 2015

I have tried with this thing for hours and I can't get it to parse.

Trying to get last year so the expression should evaluate today as of "12/31/2014"

I looked all over on Google and couldn't find an expression to copy so I've been playing with it.

Here is what it is in SQL Server:

SELECT DATEADD(dd,-1,DATEADD(yy, DATEDIFF(yy,0,GETDATE()),0))

Absolutely could not get it to parse..even with DT tags, etc...

View 9 Replies View Related

Integration Services :: Index In Variable Mapping

Oct 5, 2015

Why the index value is used in variable mapping while using for each loop container. In one of ssis package I saw the index value as 2. What 2 indicates in index?

View 3 Replies View Related

Variable Visibility Within An Integration Services Project

Apr 3, 2006

im creating an sql2005 integration services project ( DTS). i am creating a user variable. i want to be able to use that variable inside a script task. how do i reference the variable so that it can be seen within the script task??

View 2 Replies View Related

Integration Services :: How To Use Temp Table / Variable

Aug 8, 2014

It's SQL 2008 R2. I need to bring data from Oracle using .Net Providers/ODBC Data Provider to MS SQL table converting Oracle UTC dates to PST.  The source connection type cannot be changed as it's given. For the Destination I'm using the OLE DB.

As the truncate all and load could take time I'm trying to use a temp table or a variable to use it further with t-sql merge or not exists to bring/add the only new records to the destination table.

I'm trying different scenarios that is all failed.

Scenario A:

1. In DTF after OLE DB Source I'm using the Derived Colum to convert dates. It's working well.

2. Then use Recordset Destination with an object variable User::obj_TableACD. It's also working well.

3. Then I created a string variable with a simple query that I could modify later "select * from " + (DT_WSTR,10)@[User::obj_TableACD] trying to get data from the recordset object variable but it's not working.

Scenario B:

1. Created a store procedure to create a temp table.

2. Created a string variable to execute SP str_CreateTempTable: "EXEC dbo.TempTable". It's working well with the SQL Task with SQLSourceType as Variable.

3. Then how to populate the temp table from the Oracle source to bring data into the Destination?

View 6 Replies View Related

Integration Services :: Variable Data Is Truncated

Aug 25, 2015

I have created a SSIS package that runs several reports exporting the file output to a shared directory.  Then I email these files as attachments to an email group.  I got everything working so far.  But when I checked the email there are only some of the attachments (3 out of 6 files).I have created a variable that uses an expression to concatenate several filenames and their paths separated with a "|".   When I evaluate the expression it list all six files.  When I use the variable in an expression when assigning the "FileAttachments" property in the Expressions tab in the Send Mail Task editor and I evaluate the expression, it only shows 3 out of the 6 files. 

Each file name and path is less than 100 characters.  Why is this task only grabbing 3 out of the 6 files.  If I check the shared directory all 6 files are there. Also, there are two paths in the package that input into the Send Mail Task each creating a different set of report files.  Only one of the paths files are getting attached.  The connectors to the Send Mail Task are set as Evaluation operation: "Constraint" and the Value: "Completion".  Under Multiple constraints I have selected "Logical AND, All constraints must evaluate to True".

View 2 Replies View Related

Integration Services :: Using Object Variable In SSIS?

Aug 17, 2015

I have one scenario. I am calling all columns result set to an variable and inside for each loop container using script task to get message about how many columns are coming in the loop.

At last using send mail task to send automated mails to group of people,but issue it is taking only person's mail id and coming out of loop.

how to call object type variable ?

View 4 Replies View Related

Integration Services :: Convert SSIS Datetime Variable Value

Jun 11, 2015

I have created one variable name migration_start datetime which give me default format of 6/11/2015 1:26 AM...But I expecting to get in 2015-06-11 01:26:22.813 format.I have used below expression betting getting issue with that

(DT_STR, 4, 1252) DATEPART("yyyy" , @[User::migration_start]) + "-" + RIGHT("0" +
(DT_STR, 2, 1252) DATEPART("mm" , @[User::migration_start]), 2) + "-" + RIGHT("0" + (DT_STR, 2, 1252) DATEPART("dd" , @[User::migration_start]), 2)

View 5 Replies View Related

Integration Services :: SSIS Logging To Output Value Of A Variable

Aug 28, 2015

I have enabled SSIS logging for a Package.

Is it possible for SSIS logging to output the value of a variable. 

Currently, it is only outputting the name of the variable, such as:"User::FilePath"

View 2 Replies View Related

Integration Services :: Correct Syntax To Access A Variable

Sep 30, 2015

I am having trouble finding the correct syntax to access a variable. I have a variable defined in the Variables window: The variable name is formatedDate. The DataType is String.

I am successfully setting the value of the variable in a Execute SQL Task. The SQL is as follows:

SELECT LEFT(CONVERT(VARCHAR, MAX(ReportDate), 120), 10) as formatedDate
from DimReportDates

The Result Set is set to “Single Row” and properly set up. 

No problem so far. I can see with a watch that the variable has the correct value, something like:

‘2015-09-30’

Now, in a subsequent step, a Data Flow Task, I want to access the variable. Actualy it is in the SQL statement of a OLE DB source in the Data Flow… I have the following:

Declare @sDate smalldatetime
SELECT @sDate = xxxxx

I have tried several things substituting xxxxx above, but nothing seems to work. One variation was

 @[User::formatedDate])

 Another was

((DT_WSTR, 10) @[User::formatedDate]).

I think I’m close, but just can’t get it. What is the correct syntax.

View 4 Replies View Related

Integration Services :: How To Populate Array Variable For Web Service

May 11, 2012

So I have a Web Service that works just fine when I enter the parameter values myself.  I get results and can parse it out, storing the results into a table.  I even have it working in a "For Each Loop" for one of my variables.   The issue I have is that the Web Service accepts 3 variables, the first being an Array.   How can I populate the array variable for web service?

View 5 Replies View Related

Integration Services :: Passing Tablename In Query As Variable?

May 6, 2015

I am using a sql task to get all tablenames and then passing the output to another sql task inside a for each container.

So that the 2nd sql task will be executed for each table. My query looks like SELECT DISTINCT b.EmailAddress FROM  ? ......

Since I am passing the tablename as a variable (output from the 1st sql task), I get the following error:

[Task Execute SQL] Error:

Failed to execute the query 'SELECT DISTINCT b.EmailAddress FROM? AS a INNER... ':' Failed to extract

the result in a variable of type (DBTYPE_I4)'. Possible causes include the following: Problems with the query, not properly fixed ResultSet property, not properly set parameters or not properly established connection.

how to pass a tablename as a variable to a query?

View 5 Replies View Related

Integration Services Globla Variable And Scheduling Issue

Oct 30, 2006

I have one main package from which i am executing 5 other packages.I want to use one single DB connection in all the packages which i am declaring in Main package and it should be available in all the child packages. How can i Do this?

Few Variables are common is all the packages so i want to keep it Globally so how can i access those variables ?

How can i schedule package in sql server?



Thanks

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved