I have a table with email addresses and CC_Flag.
Email    | CC_Flag
xxxx          0
yyyy          1
zzzz          1
Using Task SQL, I am trying to pass these email addresses to two separate variables - To_field, Cc_field on basis of the CC_Flag..Is it possible to fill two variables from a single SQl Task,.
I created a simple SQL Task in SSIS.
Connection is ADO.Net
SQL Statement is SELECT 10 AS NumberVar
ResultSet is set to single row
But when executing task I always get error message:
[Task 'SQL ausführen'] Fehler: Die zurückgegebene Anzahl von Ergebnisbindungen ist für 'ResultSetType' ungültig: 'ResultSetType_SingleRow'.
In English something like returned number of bindings is not valid.
I've built an SSIS package in SSDT 2014. The package was running successfully
When I close and open the package it hangs on validation of single task out of all.
OLEDB DESTINATION Task
I have tried several times to close the SSDT and open but facing same issue.
These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?
I'm executing Oracle procedure, which has three OUTPUT parameters and returns results in table type variable. i should not use ODBC, MSDAORA providers to call the procedure. So I'm planning to using Oracle OLEDB provider. I'm able to execute the procedure successfully, but when i do check (while dr.Read()) its not returning any records. But I know as per stored procedure results, it should return 66 records.
Dim conn As New OleDbConnection
Dim cmd As New OleDbCommand
Dim dr As OleDbDataReader
Dim QSQL As String
[code]...
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View RelatedIn short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
Tried with Pivot but I'm not getting expected results for the requirement.
SUB       Tests        Marks
----------------------------------------
Maths      Test1        50
maths      test2        60
maths      test3        50
maths      test4        80
English     test1       35
English     test2        60
physics     test4        80
Results need to be shown as below.
sub      test1    test2  test3  test4  Â
--------------------------------------------------
maths   50     60     50     80
English   35     60     null     null
physics  null    null    null     80
I set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned).But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. " I tried to change the type of variable around but with no luck. Â
View 5 Replies View RelatedI have table called email_address and have all the email ids in this table. using sql task, I am getting the ids and passing to string. This string variable is passed to the to field using expression.Since it is a string only the first email id is set in the to field and the rest is ignored. Can you tell me a way to parameterize all the email ids to the to field in this case.Email ids from Table -> To field..I would like to put all the email ids in the to fields at once and send only a single email!
View 10 Replies View RelatedI want to get output of below query in single row.
Select 'Name'
Select 'Surname'
Expected output is Name,Surname
Error code: 0xc0012024
Using "Integration Services Project" template in Business Intelligence Studio. Using platforms Visual Studio 2005 along with SQL Server 2005.
Getting the error while trying to execute package after loading it programmaticaly.
I've just one task "Transfer SQL Server Objects Task" on my Integration Services package. But when I try to execute it from VS 2005 project programmaticaly, it gives the above mentioned error.
The commands I use:
Package pkg = new Package();
pkg = a.LoadPackage(@"C:Documents and SettingsabcMy DocumentsVisual Studio 2005ProjectslSSISSSISPackage.dtsx", null, true);
DTSExecResult dResult = pkg.Execute();
The the error comes like: error: 0xc0012024 The task Transfer SQL Server Objects Task cannot run on this edition of Integration Services. It requires higher level edition.
Please help me.
Thanks in advance,
Bhupesh
I have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine:
Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads:
SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
Any deas where this error comes from?
 I have created an SSIS package which processes daily financial information to a sql server database.  These processes are to be outputted to excel spreadsheets to a readable report format for management to review.  Some of these reports are laid out in a way that is not just tabular output but requires customized placement of data on an excel spreadsheet to specific cells. Â
I am able to place an initial resultset of a query output from the database in a tabular excel template through SSIS but the issue is at the end of that placement in the spreadsheet I am required to place another output below that tabular output in a different format from the initial output which I have shown below.
My Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?
View 3 Replies View RelatedI want to store multiple config files into single table I am unable to do it.
View 8 Replies View RelatedI've got this issue with a query in SSIS. From a table in SQL Server I'm getting over 25000 different identifiers. These identifier are associated to many values in a table in  one Oracle Database. This is the schema that I have implemented for doing this.
The problem is that some days the identifiers can be over 45000, and at this point perform a loop for every one is not the best solution (It can take to much time to get the result). Previously I have performed another query where from the SQL statement.
I am creating and sending a unique row with all the values concatenated and then I have recover this unique string from an object and use it to create the query in the ODBC Source that invoke the table in Oracle: something like this:
'Select * from Oracle_table' + @string_values
with @string_values = 'where value in (........)'. It works good because the number of values is small enough to be used, like 250. But in this case I can not use this approach because the number is really big and obviously the DBA of Oracle is going to cancel the query.
So I wonder, how can I iterate over the object getting only a few number of values everytime, something like 300 or maximum 500, to avoid the cancellation of the query but at the same time doing the minimum number of loops.
I have a delimited text file with 650+ columns. The sum of the column lengths of a single row, if fully populated, exceeds 30K bytes. The "killer" fields lengthwise are the "Description" fields. If they were removed from the input file, the remainig columns would occupy about 5000 bytes, which is within SQL max row length.Â
Can SSIS be used to created these two tables? (one without  description fields, the other with those field but arranged vertically in the table rows).
The fundamental issue is I can not import a single file row into a sql table because that row length could exceed the max byte count for a row.
If I have a stored procedure that returns 15 tables, how do I distinguish the tables to assign variables to each table in c#?
View 6 Replies View RelatedHow To Use Message Queue Task In Integration Services
i set break point in Script Task, but the process didn't stop.
environment : SQL Server Business Intelligence Development Studio 2008
how to solve this issue ?
Hi,
I has created a SSIS FTP Task Programatically for Receiving Files. I have written code for Transfering data from FTP to my local machine. it is working fine. i need to log the details of the file transferred like file name, file size it to database table.
can any one help me to solve this...... its very urgent please.....
Is it possible to do? I'm getting lock violations in I try to execute several tasks in parallel.
View 4 Replies View RelatedHow do I pass a single column of values from a successful merge join to an EXECUTE SQL statement so it can be used with an "IN" criteria of the WHERE clause? Â Here's an example of my update statement with two random key values:
UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK IN ("XYZ123", "DEF890")
Is this even possible in SSIS, or am I better off using a loop and running the update EXECUTE SQL Statement for each individual key value, as in the following example?
UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK = "XYZ123"
UPDATE dbo.MyTable SET MyStatus = 1 WHERE MyPK = "DEF890"
Executing the FTP Task - The execution starts and after 3 or more minuts the execution stops with the RED X but with no errors, and the file is not transferred.I use the same entries to the FTP connection manager as it is for the Dreamweaver...The variable that I created for file in the site is FileName1 and the site directory tree is The local path is And The File Transfer is filled up like this: After the Execution stops I get..And the file was not transfered..Also, when I try to Specify the Variable Expretion.
View 8 Replies View RelatedI have a SSIS 2014 project that is being deployed to the 2014 SSIS catalog. In one of the packages there is a script task that uses an ftp connection manager within the package.
There is structured error handling in the script and it runs fine in development, but fails when deployed and scheduled to a SQL Server agent job. The error that is being returned isn't permissions of authentication failure, but returns as the task times out. The package and project use encryption by password.
I have a Send Mail task as part of a validation process in a OnPostExecute event handler. All tasks preceding the Send Mail task get triggered and show green check mark next to them, but, for some reason, Send Mail task never gets one.
I checked the Execution Results tab and it doesn't show any indication of Send Mail task executing as a final step.
I checked the SMTP server configuration and did some test using localhost. I'm able to send as configured while using anonymous credentials.
I have a situation where i need to unpivot multiple columns using ssis. The data looks like
Name Age products1 products2 orders1 orders2
abc     23   cycle       radio         12        24
as
Name  Age Products  orders
abc    23     cycle      12
abc   23      radio      24
Is it possible to do this using the unpivot task in ssisMy actual data is has 18 columns which needed to be unpivoted into one and another 18 into another one.when using unpivot task it gives an error saying only one pivotvalue key is allowed.
I need to create excel workbook "SalesData.xlsx', which should have worksheet "POS". After creating excel file in specific location, script should be able to format cells as well.For instance, first two column type should be numbers. Here are the columns:
ColumnName : Type
Id : Number
AccountNumber : Number
Name: Text
Address: Text
Also, it checks for existing file . If it exist, then overwrite the file.
This is for SSIS 2008r2. I am generating flat files successfully with a datetime stamp (filename_yyyymmddhhmm). Now I need to append a MAX(FILEDATE) from the file. I have a query to do this, but am not sure about two things:
1) Is it advised to put the query in a Script Task (with db conn and so forth) or is it better to put it in an Execute SQL Task? I am thinking the latter but am not 100% sure.
2) How would I pass the result of this query (yyyymm) to the filename. The filename format would be (filename_yyyymm). I am assuming that I would probably need to pass the result into a variable/expression but am not quite sure of the steps involved.
I'm a beginner in ssis. Use of Pointer in Data Flow task (Transformations)Royal PS
View 11 Replies View RelatedI was given the following code for use in a Script Task, but it is written in C#:
Â
           Company.File.ACH.NACHA file = new Company.File.ACH.NACHA(126, @"Data Source=SERVERSAND;Initial Catalog=Database;Persist Security Info=True;User ID=ID;password=pswd;");
           file.Create();
           FileInfo t = new FileInfo("C:/newfile.txt");           StreamWriter Tex = t.CreateText();
           //byte[] bytearraye = file.OutputArray;
           Tex.WriteLine(file.ToString());           Tex.Close();
Â
I've tried to convert this to vb.net for use in a Script Task, but I'm doing something wrong.
We have Sequence generator (Next Value) enabled for surrogate keys (SQL Server 2012). When we use the new SCD task, we get the following error:
[Insert Destination [42]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "NEXT VALUE FOR function cannot be used if ROWCOUNT option has been set, or the query contains TOP or OFFSET. ".
Is there any know issue that these two features [SCD task and Next Value]Â cannot be used together?
We are using an OLE DB Source for the Data Flow Source and OLE DB Destination for the Data Flow Destination. The amount of data being moved is about 30 million rows, and it is gather using a sql command. There is not other transformations in between straight from one to another. The flow starts amazingly fast but after 5 million rows it slows considerably. Wondered if anyone has experienced anything similar with large loads.
View 6 Replies View Related