I'm using SQL Srv '12. Have ADW'12 and ADWDW'12 DBs installed.I created a new SSIS project. Two project level OLEDB con mngers (One for each OLEDB DB).Dragged and dropped a new DFT.Inside the DFT, I'm using Source Assistant to connect to the ADW'12 OLEDB source.
View 8 RepliesGetting following error while trying to connect to ORACEL database using OLEDB manager.
Error at RADAR [Connection manager "RADAR_Updated"]: SSIS Error Code DTS_E_OLEDB_NOPROVIDER_ERROR. The requested OLE DB provider OraOLEDB.Oracle.1 is not registered. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
[code]....
I am trying to connect to a Web page from SSIS and I've tried both http connection manager and a Script Task but none of them seems to be working.
I get the following errors:
Through Script Component: Exception has been thrown by the target of an invocation.
Through http connection manager: The remote server returned an error: (503) Server Unavailable.
Here is one of the VB code I've tried:
Public Sub Main()
Dim MyWebClient As New System.Net.WebClient()
Dim proxyObject As New System.Net.WebProxy("BANANA:8080", True)
MyWebClient.Proxy = proxyObject
[Code] ....
And, here is one of the C# codes I've tried:
public void Main()
{
Variables varCollection = null;
Dts.VariableDispenser.LockForRead("User::RemoteUri");
Dts.VariableDispenser.LockForRead("User::LocalFolder");
Dts.VariableDispenser.GetVariables(ref varCollection);
varCollection.Unlock();
[Code] ...
I could open the same web page mentioned in the code manually in all my browsers (IE, Firefox, Chrome).
I am using SQL Server 2014.
I am new to MSBI, I am unable to create parameter using OLEDB ....
I am using Report Builder 3.0 and using this report tool I am executing below query, while I am running this query it display below error message.
Query: SELECT * FROM EMP WHERE EMPID =@EID
I need to pass @EID as parameter.
Error msg: (run the above query disp error msg)
Column or global variable *N not found. SQLSTATE:42703, SQLCODE:-206(Microsoft DB2 OLE DB Provider)
Hi,
I am using SQL server 2000, Crystal Reports 8.5. I dont see any problem with accessing thro' VB Coding(ADODB).
Crystal Report connection thro ODBC also working fine.
But when i try to connect to database thro "More data sources" -> SQL server , i was thrown out with an error "Unable to connect to SQL server servernam"
I have uninstalled & Reinstalled both SQL server and Crystal Report. Still not working.
I have been struggling with this problem for quite a long time.
Can any one give me the solution for this ??
Regards
SRagghu
OS : Win7, 64bit
Software : Oracle Clients 32bit and 64 bit (11g), SSIS 2012
I have installed both 32bit and 64bit oracle ODACs during the clients installations, and then i have installed the ssis 2012.
When i open .udl file i can see the 'Oracle Provider for OLE DB' provider and connect to the oracle db.
When i try to open new Ole DB connection in the ssis the 'Oracle Provider for OLE DB' is not listed under the 'Native Ole DB' providers.
i tried to reinstall both ODACs of 32 and 64 bit of the oracle but still the provider is not listed under the ssis providers.why ?
I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.
when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.
I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,
CREATE TABLE ##SiteTemp
(
LEVEL2 VARCHAR(20),
LEVEL3 VARCHAR(25)
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
I try to import my SSIS packages which are created using the Business Intelligent studio into SQL server 2005 but I cannot do that.
I am running SQL server 2005 enterprise edition.
Also when i tried to connect to Integration services using Object explorer, it only prompt me for server name. I cannot change the username and password which is disabled.
Then how am i supposed to connect to Integration services on a server in this case?
I am getting the following error when trying to EDIT a OLEDB Connection Manager. I am using VS2010. Im not coming up with any answers to this problem. I just reinstalled SQL SERVER CLIENT TOOLS 2012 That includes the SQL DATA TOOLS/VS 2010 But I still receive this error.
Error:Unable to find the requested .Net Framework Data Provider. It may not be installed. (System.Data)
Is it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies View RelatedHi everybody,
I have designed a DTS package which will migrate a view from Sqlserver 2000 to Oracle.My package is using Microsoft OLEDB provider for Oracle driver for connecting to oracle.Im able to execute this package on the my system ie on the system where sqlclient is installed(Oracle client is also installed on my machine) .But when im doing it on the server im not able to do it.The Connection to Oracle Fails.
I wanted to know in order to connect to Oracle from the server,is it necessary that Oracle has to be installed on the server?.If yes, is it enough if i install oracle client on the server or Oracle Server version has to be installed on Server.
Please suggest me wht should i do know?
Thanks in advance
Regards
Arvind L
I have an SSIS job that is pumping to a SQL Server Destination, hundreds of gigabytes of raw text files. Today I received this strange error ? Also, how would I make the data tasks more stable and robust so that this doesn't cause package failure (retries, or something?)
[SQL Server Destination [4076]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
We run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail? Either way is there a way I can detect that the threshold was exceeded?
View 3 Replies View RelatedI am trying to dynamically change my initial catalog in a SSIS project. Each day I get a snapshot of data from the production server. I am performing ETL on that database and loading it into my warehouse. I am trying to put something together so that each day I get the latest snapshot and if its newer then my most recent one I pass that new catalog into the connection manager. I can already run the sql script to compare the two catalogs but I can't populate the connection manager.
View 3 Replies View RelatedI need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedI am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
In my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation > Oledb Command
> Rowcount_Transformation1 > Oledb Command1
> Rowcount_Transformation2 > Oledb Command2
> Rowcount_Transformation3 > Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
All,
While trying to access the Reporting Services in Mng studio.I receive the following error
Cannot Connect To ServerA
Client found response content type of 'text/html; charset=uf-8,but expected 'text/xml'
While trying to access the report on reportmanager.I receive an error."The report server is not responding.Verify that the report server is running and can be accessed from this computer"
Any suggestion?
Hi all,
I am new to reporting services. I have created a report project in SQL Server BIDS. The datasource is SQL Server. I was able to see the preview of the report and could build and deploy the report. But when I try to run the report, it gives me error. So I tried connecting to Reporting Services through SQL Server Management Studio.
There I am unable to connect to the Reporting Services.
I am getting a very long error message. Giving below few lines which made sense to me.
Client found response content type of text/html; charset=utf-8, but expected text/xml.
Parse Error Message : An error occurred loading a configuration file: Access to the path c:Inetpubwwwrootweb.config is denied
I have given full rights to ASPNET, AuthenticatedUsers.
Pl help to resolve this issue.
Thanks,
Tejaswini
Hi,
I've installed with success Visual Studio 2005 team edition for software developers and SQL SQL Server standard edition, but when I've created a new IS project and click on "No Data flow tasks have beed added to this package. click here to add a new DataFlow task"
I receive the following message :
Registration information about the Data Flow task could not be retrieved.
Confirm that this task is installed properly on the computer.
Could not enumerate the registered tasks. (Microsoft.DataTransformationServices.Design)
Does someone experience this before ? is there any work around ?
Thank you for your help
When I open integration services on my SQL server, I can expand the File System folder fine, but when I try to expand the MSDB folder under stored package, I'm getting the following error: My SQL Server is setup to allow remote connections. What else could be causing this error on the server?
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (Microsoft SQL Native Client)
------------------------------
BUTTONS:
OK
------------------------------
Hi all
I have a little problem with my IS Server.
I am using Windows Server 2003 64bit and IS 9.0.1399.
I have two named instances for databases.
I am able to connect to Intergration Services just with the
Servername (no Instance Name) and I see the folders in there.
When I try to open the MSDB Folder (under "Stored Packages") I
get the following exeption:
"Failed to retrieve data for this request ...."
and Additional informations: "Login timeout expired ....."
I am of corse administrator, so permission will be ok ...
Any ideas?? Thanks for any comment!!
Best regards
Frank Uray
Trying to move data in Sybase IQ from one database (prod) to qa for a table. Using ADO.NET connection and just one Data Flow task , source , destination. Using Sybase IQ driver.
Error:[ADO NET Destination [2]] Error: An exception has occurred during data insertion, the message returned from the provider is: Unable to cast object of type 'System.Decimal' to type 'System.Char[]'.
Nether source or target table have column with data type Decimal or Char. All types I have in table are numeric (54,15) , bigint, varchar, date.
Currently we are unable to connect to analysis services and getting the below error
Element 'return' was not found.Line 5,position 2
What could be causing this?
When i try to connect to SQL 2005 integration services from object explorer i get connected (in the sense it shows in object explorer running packages stored packages ..)but when i try to exand any of these objects i get the following error
--------------------------------------------------------------------------------------------------
Failed to retrieve data for this request(Microsoft.sqlserver.smoEnum)
Additional information
The sql server specified in SSIS service configuration is not present or not available.This might occur when there is no default instance of Sql server on the computer. For more information see "config integeration services" in server 2005 books online.
Login time out expired
An error has occured while establishing a connection to the server.When connecting to the Sql server 2005, the failure may be caused by the fact that under default settings Sqlserver does not allow remote connections.
Names Pipes Provider: could not open a connection to Sql Server[2].(MsDtsSrvr)
----------------------------------------------------------------------------------------------------------
i have chkd remote connection settings and other settings but cant find a way out.
kindly provide some help
Thanks in advance
I am trying to build packages Programmatically, added a Script Task and tried to add some references from DLLs. I got an error message showing that there is no template found, and from the event viewer of windows which tells me to run 'VSTA.exe /installvstemplates' or 'devenv.exe /installvstemplates'. I have run these two command and reinstalled the SQL server 2008, but still unable to add any references to the project.
The error msg:
---------------------------Integration Services Script Task---------------------------No template information found.
See the application log in Event Viewer for more details.
Hi All,
i was ask to grant a developer permissions to use integration services.
he can run the ssis packages and it works fine, but he cant open integration services with sql management studio.
if i am adding him to the local administrators group on the server it works, but he is not a system administrator.
how can i connect to the integratin services without been a local administrator on the server ???
We have a maintenance plan in place for updating the statistics on daily basis. Now, i would like to remove the view from maintenance plan. How can i remove that from Update statistics task?
View 8 Replies View RelatedI have a little problem with my IS Server.I am using IS 9.0.1399 (SSIS 2005).I have one instance for databases.I am able to connect to Integration Services just with the Servername (no Instance Name) and I see the folders in there.When I try to open the MSDB Folder (under "Stored Packages") I get the following exeption:
"Login timeout expired/An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.SQL Network Interfaces: Connection string is not valid [87]."
I could not change user while attmepting to connvert Integration Services using Windows Authentication via MSSQL MS
any idea? thanks