I have a Data Flow task Within a for loop Container.. the for loop container receives the result of sql query, iterates over the result set and passes each variable to the OLE DB Source.. Now based on the parameter passed I need to execute a query.. say for example if the parameter passed is P1 execute SQL S1 , P2 then S2 & so on.. How do I use the Parameter passed in SQL Query?
View 12 RepliesI'm using following command to populate my OLE DB Source. I have two of those in each Data Flow in my package. One of the OLE DB Sources points to my source database the other to the destination. In order to limit the number of rows I use the WHERE clause below. The [EnergyMiserFSRLive] being the the name of the source database. The Connection manager points to the destination database.
I would like an elegant way to replace [EnergyMiserFSRLive] with a parameter which I can reuse in each of my many data flows rather than use this hard coded value [EnergyMiserFSRLive].In particular I'm after the syntax of the below query that uses the parameter for [EnergyMiserFSRLive].
SELECT [SitesId]
,[SiteName]
,[FilePrefix]
,[City]
,[StateProv]
,[Country]
FROM [Sites]
WHERE SitesId >= (SELECT MIN(SitesId) FROM [DBNameFSRLive].[dbo].[Sites])
ORDER BY [SitesId]
i am parameterize my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:
Argument "" for option "parameter" is not valid. The command line parameters are invalid. The step failed.
what i need to do is pass different environment here while deploying to different env.
I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get
TITLE: Microsoft Visual Studio
------------------------------
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.
The columns are there in the preview - why can't SSIS get the column information?
How to execute ssis package from command prompt and also pass configuration file to it and set logging to ssis log provider for sql server. Writing all those options with cmd.
View 3 Replies View RelatedIs it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies View RelatedIn my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
We run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail? Either way is there a way I can detect that the threshold was exceeded?
View 3 Replies View RelatedI need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedIn my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation > Oledb Command
> Rowcount_Transformation1 > Oledb Command1
> Rowcount_Transformation2 > Oledb Command2
> Rowcount_Transformation3 > Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters.
I'm seeing a failure to refresh dependent parameters in a report I've got running in WSS 3.0. The same report functions fine deployed to Reporting Services site and it refreshes all parameters when I change dependencies. But in Sharepoint document library it seems to post and redraw page but the dependent parameters do not update.
I must hit the apply button which will refresh the dependent parameters. I can then select the updated multi-select lists and run the report fine.
I do not think this is the desired behavior.
I'm running WSS 3.0 with SQL 2005 sp2 CTP and Sharepoint Add-in CTP which I found here: Add-in
Is anyone experiencing problem with parameter driven reports? Seems to be related to parameter depth/dependency.
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
I have created a SSIS package which runs every hour from my Machine. First part of my Package runs a Execute SQl Task and result set (single row, single column) is a comma separated list of Unique Record Ids which have been updated in last hour. (i.e. FJ1,FJ2,FJ3) I capture this result in a variable and when I User script taks to display the value of this property, it appears as it should be.I pass this Variable to Execute SQL Task on Different ODBC Server using a Stored Procedure.My SQL Statement is as Following
call DeleteRowsById(?)
And then I have assigned my Variable (as SQL_Longvarchar) to Parameter 1 in Parameter mapping Section. (ParameterSize is -1) but it doesnt delete the records from the table. (I ran the SP manually in Workbench and it works as expected) Then i had an Idea and
as part of my SP I started making entries in a Temp table just to see whats coming up as variable. Insert in the table shows only first Charecter from the variable and which is why its not deleting any records.I can not find why my variable is being truncated.
I'm trying to create an SSIS package job in SQL server 2014 but I get the following error when trying to change the Package source and confirm. I have alsredy checked the connection mangers and they were all successful, I'm not sure what I should be checking.
"Make sure that the required parameter "name of parameter" is set".
I'm calling the SSIS packages through SQL agent job. The packages have variables defined with default values.The parent packages have no package configuration. The child packages have package configuration of ‘Parent Package variable’ type The variables are being passed from the job. The job calls the parent package which loops though the child packages. I would like to know how the variables traverse through the packages and the jobs?
Another doubt not related to above. I am unable to make any changes to the connections. Whatever changes I make it is getting reverted to the original if I click elsewhere. So as a workaround I view the code in XML and change.
In SSIS : how to set a parameter in a Script task?
View 4 Replies View Relatedpublic Sub Main()
Dim url, destination As String
destination = Dts.Variables("report_destination").Value.ToString + "" + "Report_" + Format(Now, "yyyyMMdd") + ".xls"
url = "http://localhost/ReportServer?/ssis_resport_execution/ssis_ssrs_report&rs:Command=Render&ProductID=" + Dts.Variables("ProductID").Value.ToString + "&user_id" + Dts.Variables("user_id").Value.ToString
+ "&rs:Format=EXCEL"
SaveFile(url, destination)
Dts.TaskResult = ScriptResults.Success
End Sub
How to pass more than one variable values in ssis as parameter values to ssrs. With the above code its showing as empty.If i am taking single variable i am able to render the data into excel sheet.
I have following job script. I need to make file connection and db connection passing in job as parameter.
where in following script is should pass it.
if i am passing here but when i change path it still getting old path in package.what i needs to change in package.also how to make connection dynamic so in each env when we deploy it will automatically change. We have sql job script for each env.
I am using a OLE DB source task and i want to setup a parameter in the select statement. Is this possible and how would this be done. I know you can pass a parameter in the where clause like:
select id, lname, fname, startDate, endDate from Employee where id = ?
How would i set startDate and endDate as parameters as i would like to be able to change these parameters when running the package. I would like to set dates in the select statement as parameters like how you would in the where clause.
Select id, lname, fname, ? startDate, ? endDate, from employee where id = ?
I would like to be able to change these dates without having to go in to the package and hard code it back in there and then deploy.
The package uses a OLE DB source to Flatfile Destination.
Is it possible to parameter the connection of a Lookup Transformation task - specifically the table/view name? I would like to be able to dynamically set the table that the Lookup Transformation is connecting to at runtime.I've looked into the "Use results of an SQL query" on the connection screen (which correlates to the "SqlCommand" property), but I'm unable to pass in a parameter this way.I've also looked into the SqlCommandParam, but that doesn't allow me to use a parameter in the "FROM" clause of the sql syntax.
View 4 Replies View RelatedI am working with SQL Server 2012. I have deployed a SSIS project that has 2 packages in it. The package connection manager (Test) uses an expression to evaluate one of the Project parameter value (TestConnectionString) to set its ConnectionString property.
This works fine in a Dev environment. However when deployed to UAT, it keeps failing with the error:
PackageExport:Error: The result of the expression
"@[$Project::TestConnectionString]" on property
"Package.Connections[Test].Properties
[ConnectionString]" cannot be written to the property. The expression was evaluated, but cannot be set on the
property.
I can not seem to find what the issue could be. I have come across [URL] .... where it says: "If the package contains project parameters, the package execution may fail." but offers no solution.
I have an expression based project connection manager in an existing package and updating Packet Size parameter.
After update and clicking on OK, Packet Size value reverts back to 0 (which is old value). This connection manager is used by lot of Dataflow tasks in my package and recreating the connection manager and updating the reference is not a viable option.
we can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
Is it possible to parm in a value to a SSIS
in my SSIS i have a variable;
Name : FileName
Scope : PackageName
Type : String
Value : ""
I have tried adding the following code in my vb.net project ;
pkg.Variables("filename").Value = "C: emp estfile.001"
pkg.execute()
but come up with the following error
A first chance exception of type 'System.MissingMemberException' occurred in Microsoft.VisualBasic.dll
Public member 'Variables' on type 'IDTSPackage90' not found.
can anyone help ?
Hi All,
Parameter passing in SSIS 2005 sometimes appears to be a cumbursome task. I have been digging into this topic for quite some time and here i note down some simple steps to demonstrate parameter passing at Package level.
(1) Create a SSIS project using Business Intelligence 2005 Or VS 2005.
(2) Create datasource (.ds) and Data Source View as required.
(3) A default SSIS Package by the name Package.dtsx is created. Double click this and you are shown tabs for Control Flow, Data Flow, Event Handlers, Package Explorer. On the Control Flow, drap and drop Execute SQL Task from Control Flow Items in the toolbar.
(4) Lets now create a variable at Package level. Right click anywhere in the control flow box (not on the Task created in Step 3 above). Click on the Variables on the context menu displayed. Variables window appears on the left of the screen. Click the Add Variable box in this window to create a variable. Name it var1 (or whatever you may like), Scope as Package, DataType as String and Value as MyValue. This is only the default value.
(5) Now let us edit the SQL Task created in Step 3. Double on it, on the General tab you can change its Name, Description. Set ResultSet as None. We shall proceed to execute a stored procedure by name MySPName and pass it a parameter. Set ConnectionType as OLE DB. Select the connection you creates in step 2. Set SQLSourceType as Direct input. SQLStatement as MySPName ? . Note the ? mark after the name of the stored procedure. This is important to accept the variable value (var1) created in Step 4.
(6) Select Parameter Mapping tab now. Click on Add button. Select the Variable Name as User::var1. This is the user created variable of Step 4. Select Direction as Input, DataType as Varchar and Parameter Name as @var1. Click on OK now.
(7) This sets up the basic of parameter passing. Compile the project to verify everything works. Right Click on the SQL Task and select Execute Task. This will execute the package taking default value of the variable. This can be used along with dtexec command with /set option to pass the parameter at command prompt.
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter.
How do I know , when this parameter is coming in the preview ?
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
my dataset from sharepoint list. and this dataset value assign to parameter. i want when no any parameter is selected than it should filter like "ALL". when i select alow null value it give me prompt error you can not select null in multivalue parameter.How can i do it. i am using share point list.
View 3 Replies View RelatedI am using reporting services 2012, Can we make visibility of report parameter dynamic, ie can we make parameter visible or hide on certain condition or its visibility depends on other parameters Is this feature available in any other updated version of ssrs?
View 2 Replies View RelatedI am using report builder 3.0.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.