I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
how to declare multiple derived columns in SSIS Derived Column Task in one attempt.as i have around 150 columns coming from Flat file. I had created the required Expression in Excel and now i want add those in derived column task but its allowing only 1 expression at a time.
View 4 Replies View Related
Table structure as follows
Employee
Empno empname salary
commission
I want to have an other employee table named employee_modified
Empno empname salary
commission derived_column1(salary+commission)
derived_column2(derived_column1 + xxxx) and so on derive other
columns based on the earlier derived columns)
Is that possible to do it.. or am I doing something wrong.
something like
Select empno , empname , salary , commission,
(salary + commission) as derived_colum1 ,
(derived_colum1 + xxxxx) as derived_colum2 ,
(derived_colum2 + xxxxx) as derived_colum3
into employee_modified from employee
How to use derived columns in SSIS
string to datetime
Input value : (string)
14/03/2014
NULL
15/04/2015
Note : Having null or blank value
I am trying to figure out my expression here with derived column
source
Unavailable/Planned
output
Planned(which is after "/".
I achieved this in sql but not finding solution in SSIS Derived column transformation.
i have a derived column which contains the days of a month from 1 to 31
I have this expression for column 1:
(DT_R4)([1] == 4 ? 0.5 : ISNULL([1]) ? 0.0 : 1.0)
But the ISNULL function will not work. I am sure, there are some NULL Values in Column [1] but i get all the Time the value 1.0 back.
I need the Value 0 instead of NULL to calculate the days in an extra Column.
So that i have in the end a result column which have values for example: 4,5 or 5,5 .why ISNULL is not working?
How can i write expression for below input?
1858;# 1234;#Chun Yang
I want to display only name.
So I am trying to change my date type which is in the 1/1/2015 12:30:10 PM to a 2015-1-1 00:00:00
So I am using Derived Columns to do the trnasformation in Visual Studio but I am getting the following error:
An error occurred while attempting to perform a typecast
So this is what I did
Step 1:
Load date into OLE DB Source
Step 2:
Replace function
REPLACE(ATL,"1/1/2015 12:30:10", "1900-01-01 00:00:00)
Step 3:
Replace Function
REPLACE(ATL,"/","-"0
Step 4:
Replace funtion
REPLACE(REPLACE(ATL, "AM",":00"),"PM",":00"
Step 5: this is where the error occurs
(DT_DBTIMESTAMP)ATL
Step 6:
Load into OLE DB Destination File
I have 10 columns i.e from Segment1 to Segment10. I need to concatenate it with ".". All 10 segments can be null. If any of the segment is null i do not want to show ".". This is the expression I am using
(DT_STR,100,1252)((ISNULL(SEGMENT1) ? "" : "." + SEGMENT1) + (ISNULL(SEGMENT2) ? "" : "." + SEGMENT2) + (ISNULL(SEGMENT3) ? "" : "." + SEGMENT3) + (ISNULL(SEGMENT4)
? "" : "." + SEGMENT4) + (ISNULL(SEGMENT5) ? "" : "." + SEGMENT5) + (ISNULL(SEGMENT6) ? "" : "." + SEGMENT6) + (ISNULL(SEGMENT7) ? "" : "." + SEGMENT7)
+ (ISNULL(SEGMENT8) ? "" : "." + SEGMENT8) + (ISNULL(SEGMENT9) ? "" : "." + SEGMENT9) + (ISNULL(SEGMENT10) ? "" : SEGMENT10))
But if any of the column contains Null or Blank I get ...... I do not want to show these .... if any segment is null.
What mistake am I doing in the above expression?
I have an SSIS package in which I need to include a derived column. I've done derived columns a ton when there is just one condition being "tested". In this case there are two. I have the following update statement for a table I'm inserting data into:
UPDATE STAGING_DIM_AR_INVOICE
SET SC_CODE =
(
CASE
WHEN REC_TYPE = 'P' AND SC_CODE IS NULL THEN 'ag'
WHEN REC_TYPE = 'I' AND SC_CODE IS NULL THEN 'OL'
[Code] ....
I'd like to be able to address this case on the load itself. I've used CONDITIONAL before, but not sure how that would work in this case. I'm trying to keep it as "simple" as possible.
I have the following 2 fields that are sourced from an Excel spreadsheet
DocNumber - a 10 digit number
PostingRow - a number between 1 and 999
I would like to produce a new column that is a concatenation of these two fields, but the PostingRow needs to be a 3 digit number eg. 1000256153-001 ....
Is it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies View Relatedthere is a way to write an if statement for a derived column to count rows?
for example:
Row 35: PRI 7010
Row 100: PRI 7011
formula that when it gets to row 100. it will go back and look at 35 and use that data if the 7010 = 7010, if not use 7011,,,
I have one column CandidatePlaced (Data type Boolean).
Using data conversion i changed data type to DT_WSTR and then i used derived column to manipulate the data. Ex. 1 = "Yes" and 0 = "No"
[Candidate Placed ?] == "1" ? "Yes" : "No"
But at end of result i got all the columns as No. Some should be Yes.
Derived column that transforms a CASE statement?
CASE
WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] ='25' THEN 'Standalone'
WHEN [MAIN_GAME] IS NULL AND combo.[CAT_PRODUCT] <> '25' THEN 'No main game'
ELSE LOWER(prod.[TX_PRODUCT_NAME])
END AS [TX_MAIN_GAME]
CAT_MAIN_GAME = nvarchar(6)
FK_GAME = nvarchar(2)
Using MDS 2012: I have an entity "XYZ_Entity". In "XYZ_Entity" entity I have 2 domain based Columns "DealerGroup" and "Dealer".
While inserting information into "XYZ_Entity" entity user can select the required dealer group from domain base Dealer Group values. Now for selecting Dealer he wants the dealers to be filter based on selected dealer group and he can select from the filtered list. reason to do that is he don't want to go through thousands of dealers and select an incorrect one.
Is it possible, if yes then how?
Import.csv file looks like,
TABLE_NAME DESC CODE
tab1 table1 A
tab1 table1 B
tab1 table1 C
tab2 table2 D
tab2 table2 E
tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B
red - pen
red - pencil
red - highlighter
blue - marker
blue - pencil
green - pen
green - highlighter
red - pen
blue - pencil
blue - highlighter
blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green
pen 2 0 1
marker 0 1 0
pencil 1 3 0
highlighter 1 1 1
We tried Sum but not able to display in single row.
Hi,
I have dates in "mmddyy" format coming from the sources and they are older dates of mid 80s like 082580 for instance.
When I cast it this way (DT_DBTIMESTAMP) Source_Date , It says ok but throws a runtime error.
When I hardcode a date in same format, (DT_DBTIMESTAMP) "082580" , It becomes red (an indication of syntax error) . Please note that we use double quotes in expressions in Derived Column Transformation; So an anticipation that using double quotes over single ones would be the syntax problem would be wrong.
Any help in this will sincerely be appreciated.
Thanks
Posted - 09/10/2007 : 15:53:26
Hey all - got a problem that seems like it would be simple (and probably is : )
I'm importing a csv file into a SQL 2005 table and would like to add 2 columns that exist in the table but not in the csv file. I need these 2 columns to contain the current month and year (columns are named CM and CY respectively). How do I go about adding this data to each row during the transformation? A derived column task? Script task? None of these seem to be able to do this for me.
Here's a portion of the transformation script I was using to accomplish this when we were using SQL 2000 DTS jobs:
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************
' Copy each source column to the destination column
Function Main()
DTSDestination("CM") = Month(Now)
DTSDestination("CY") = Year(Now)
DTSDestination("Comments") = DTSSource("Col031")
DTSDestination("Manufacturer") = DTSSource("Col030")
DTSDestination("Model") = DTSSource("Col029")
DTSDestination("Last Check-in Date") = DTSSource("Col028")
Main = DTSTransformStat_OK
End Function
***********************************************************
Hopefully this question isnt answered somewhere else, but I did a quick search and came up with nothing. I've actually tried to utilize the script component and the "Row" object, but the only properties I'm given with that are the ones from the source data.
thanks in advance!
jm
I have a MS SQL table with a derived column, for date the records were imported, and need to delete records, based on the content of this column. What I need to do is delete all records from the table with a date of '2011-11-18'. Now this column is a datetime column, so it contains the time info after the date, i.e. 2011-11-18 09:29:38.000, but no matter what command I try for this:
-Delete from table where Date_Imported like '2011-11-18%'
-Delete from table where Date_Imported like '2011-11-18'
-Delete from table where Date_Imported = 2011-11-18
It comes back saying "0 rows affected", even though I know there are records with that date in the table.
Hi,
I need to create a derived column for each row in a SQL dataset.
This derived column needs to be created by passing across two values from the SQL dataset and querying an Oracle table based on those parameters. If the Oracle query returns a record(s) then the derived column should be set to 1 otherwise leave it as default (0).
One of these parameters needs to check a date range so I can't use a Lookup Transformation...any ideas how I can accomplish this ?
Thanks
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
I have 3 different companies that share the same ticket_types(CRMS System). I need to display the Ticket Types and the 3 company's Ticket Count:
Ticket Type | Company A Count | Company B Count | Company C Count
I can get the information individually for each company, but if a company doesn't have a ticket in one of the ticket_types, then it isn't displayed in a row. So, I tried to write the following, which isn't pulling back any data.
DECLARE @startdate date = '20150306'
DECLARE @enddate date = '20151031'
DECLARE @AcctGrp varchar(20) = '111'
;WITH TType
AS
(
SELECT ctp.description as TicketType
[Code] .....
If I run each SELECT individually from above (excluding the last SELECT), it works and I get the following:
TicketType
AR Request Credit
Availability/Rush
Cancel Order
Credit Card Payment
Expedite Order
Freight Quote
[Code] ...
How to get the query results? Am I even close to getting it right?
How do you replace quotes in an expression
I mean for example if I needed to replace xx in a string with empty string then the following works: REPLACE(SelectedString, "xx","")
But the example I have needs to actually replace quote marks in a string with an empty string and REPLACE(SelectedString, " " ","") doesn't work. I tried guessing a few option like "E or &QTE or something...
Any ideas ?
Thanks
Richard
I am moving data from an oracle database to sql server. Two of the source fields are dates, which sometimes contain values I know to be incorrect ('0001/01/01' and '1900/01/01').
I'd like to use either the derived column or script task (or any other appropriate one) to update these incorrect values (in both columns) to null before inserting into sql server, smalldatetime field.
In sql 2000 dts, I would simply use a VBScript IF statement, but I'm somewhat clueless when it comes to .Net.
Does anyone have any ideas or sample code that may help?
Thank you much.
Hi,
Is there a way to truncate a number to a certain number of decimal places in the SSIS Derived Column component (similar to TRUNC in excel)?
Thanks!
Can anyone show how to alter the value in a column using DerivedColumn component when creating an SSIS package programatically.
View 4 Replies View RelatedI have a package that fails as soon as it hits the first Data Flow that contains a Derived Column task. The task takes three date columns and looks for a date of 6/6/2079. If it is there, it is replaced with a NULL. This task worked fine until I installed the Non-CTP version of SQL 2005 SP1, earlier today. (I went from RTM 9.0.1399 to SP1 9.0.2047)Does anyone have any ideas?
Here is the error I am trapping:
An error occurred while evaluating the function.
The "component "Update Max Date Value to NULL" (346)" failed because error code 0xC0049067 occurred, and the error row disposition on "input column "WeekEndingDate" (455)" specifies failure on error. An error occurred on the specified object of the specified component.
The ProcessInput method on component "Update Max Date Value to NULL" (346) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Thread "WorkThread0" has exited with error code 0xC0209029.
I tried to configure the error output to ignore the failure. The task succeeded. It did not insert anything, however, for the three columns in question. It then failed on the next Data Flow that contained a Derived Column task. I tried to pre-populate the columns with a default date, but no go. Any help would be appreciated.
Hi, how are you?
I'm having a problem and I don't know if it can be solved with a derived column expression. This is the problem:
We are looking data in a a sql database.
We are writting the SQL result in a flat file.
We need to transform data in one of the columns.
For example: we can have 3 digits as value in a column but that column must be 10 digit length. So we have to complete all the missing digits with a zero. So, that column will have the original 3 digits and 7 zeros. How we can do that tranformation? We must do it from de the flat file or it can be a previous step?
Thanks for any help you can give me.
Regards,
Beli
i have too many DTS packages to migrate to SSIS, and while examining a DTS package in BIDS (converted with the migration utility) i tried to edit the resulting migrated package, which opened the DTS interface with the two connection icons joined by the big fat arrow with a gear on it...not exactly what i had in mind, iow, it looks like SSIS on the outside, but its still DTS on the inside.
So I stripped out a series of components from a more complex package hoping that simplifying it would reveal the contents of old DTS Transformations tab at least partially set up in a Derived Column transformation.
Can i get there from here, or must i recreate every stinking definition in a derived column manually from the ground up?
thanks very much for your help
Hi:
In the derived column transformation editor, I have a Derived column name called FileGroupID. I would like to pass in a value for this column from a variable that I have set earlier in the scope. Can someone let me know, how to write the expression that does that and where do I specifiy that expression. I am thinking its the expression field in the derived column transformation editor. My main question is how to actually write the expression, what is the syntax to pull the variable value? Thanks.
MA2005
Hi,
I have a column that is unique that I would like to make into an IDENTITIY column after I insert some data into it.
I tried
alter table <table_name>
alter column <col_name> int Identity (1,1)
but it fails.
Ajay
WORD4LIFE
(http://www.word4life.com)