Integration Services :: How To Get Row Count Value To Destination File
Sep 11, 2015
I have a requirement in which i need to pull records from a table and load into destination flat file ..and at end of file it should display row count
for e: like this
" rowcount: 40 records" ..
i tried placing rowcount transformation in between source and flat file destination..i am able to get all records in file but unable to pull value of variable where i stored row count into that file...how to do that?
View 3 Replies
ADVERTISEMENT
Jul 24, 2015
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
View 2 Replies
View Related
Aug 26, 2015
I have a ssis package where I need to have excel destination. In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:
Data as of: 08/25/2015
if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same Data as of: 08/25/2015. not today()-day(1).
I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of: 08/30/2015 which is not true. It should still stay Data as of:
08/25/2015 on what ever date the excel file is open. The SSIS package runs only once.
How do I handle this so that whenever user open the file, they will see Data as of: 08/25/2015. This is not a column in excel. It is like a description of data in excel.
View 3 Replies
View Related
Apr 6, 2015
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
View 10 Replies
View Related
Oct 29, 2015
Is there a recommended file format (csv, xml, txt) when choosing a file destination for SSIS? Does a file format impact the performance in terms of loading? Let's say i have chosen to use a .csv as my file destination (this has 15million rows and 50 columns with 2 bigint and the rest binary(32)) and later on, i would need to reload them back to table using SSIS. Is using csv faster than e.g. xml when reloading? Does it have performance impact at all?
View 3 Replies
View Related
Nov 3, 2015
I set up a connection file in order to move data from sql to csv files. I should be at the last step, the data flow. but:I don't see any flat file in my destination assistant.
View 23 Replies
View Related
Nov 5, 2015
I have a simple package to load data from sql server db into a flat file. I have a date field in the source data base (data type DATETIME) when i open the csv file some show the exact time stamp and some records show just the seconds like (00:00:0.7). I used CAST CONVERT bu still the same issue.
AppliedDate
00:00.6
00:00.6
10/2/2015 0:00
10/2/2015 0:00
00:00.3
00:00.3
View 9 Replies
View Related
May 29, 2015
How to design ta SSIS package which loops through DESTINATION folder files and checks whether that file is there in the SOURCE or not.
If the file exists then I have to check the modified date on DESTINATION file if it is greater than 1 day delete that file. If the modified date is less than that SOURCE file then I have to copy that
file to DESTINATION<o:p></o:p>
<o:p></o:p>
If there are files which exists in SOURCE and not in DESTINATION, then how shall we copy all the files to the DESTINATION that are created on the day of execution of package.<o:p></o:p>
View 2 Replies
View Related
Apr 24, 2015
I have a SSIS job which takes a SQL Server view as its source and outputs a flat file. The file is quite large, about 20000 rows of 30 columns and up to 400 characters per row. It is configured with CRLF at the end of each line, tabs between columns, and no header row. Most rows are output with no problems, but occasionally a line will include a line break (CRLF) in the middle. The problem appears random, but the rows with spurious CRLFs appear in clusters, with each row in the cluster having a line break after the same column. To illustrate, it looks something like this:
col1 col2 ... col 30
col1 col2 ... col 30
col1 col2 ... col 24 CRLF
col25 col 26 ... col 30
col1 col2 ... col 24 CRLF
col25 col 26 ... col 30
col1 col2 ... col 30
col1 col2 ... col 30
So although there is some pattern, where a group of lines will include a break in the same place, I've not been able to identify the pattern and relate it back to the data items.
What could possibly cause CRLFs to spontaneously appear midway through the row?
View 2 Replies
View Related
Nov 6, 2015
I'm loading data from a sql server table into a flat file. The flat file connection manager has the following settings
GENERAL:
Format:Delimited
Text Qualifier:"
Header row delimiter: {CR}{LF}
Header rows to skip : 0
Columns:
Row Delimiter: {CR}{LF}
Column delimiter: comma(,)
View 4 Replies
View Related
May 8, 2015
I have a Problem with my destinations. I have a split condition with two ways the flow can use.
In this case: all and Date.
All and Date can be set by using a variable. Its working good.
When a user fills the variable with a date value (cast to string) the conditional split executes the correct flow with all the needed rows... The same time the all flow will be executed with 0 rows. In the end the destionation file for the all values will be overwritten with nothing. The same on the other hand when a user fills the variable with the all value, the date file is empty. What can i do to make sure that the files are not empty?
View 2 Replies
View Related
Jun 10, 2015
Import.csv file looks like,
TABLE_NAME DESC CODE
tab1 table1 A
tab1 table1 B
tab1 table1 C
tab2 table2 D
tab2 table2 E
tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.
View 4 Replies
View Related
Sep 2, 2015
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
View 2 Replies
View Related
Mar 12, 2013
I attempted to use Move Directory to move the contents of one directory to another. I encountered the 'different volume' issue that others have experienced. While this error is frustrating I can work past this particular issue. My more pressing question is why is the move directory command overwriting a destination directory?
When I setup the Move directory file task I provided two vars to hold src and dest location:
dest var: estserveroutput
src var: devserverdev estfiles
Set overwrite destination = TRUE
Why would Move Directory overwrite output folder at destination? Shouldn't it only overwrite if the testfiles directory exists at destination? This is very frustrating since I cannot find enough information in the official documentation to understand what is happening here.
Is it just me or does the documentation for Move directory seem.....incomplete?
View 4 Replies
View Related
Nov 9, 2015
I need to get the record counts for all the flat files in a folder. All the flat files are having different format.
Can I get the record count using a single data flow task and for each loop container?
View 3 Replies
View Related
May 12, 2015
I've been working on an issue in an SSIS package and getting strange results using a package variable named "UnprocessedFileCount". I'm looping through files in a directory (using a Foreach Loop Container) to process data into the database, and after a certain amount of time, I stop processing the files and short circuit the loop to finish the package faster. I was tasked with counting the number of files that weren't processed and it seemed easy enough to count how many times the loop "short circuited" by incrementing a variable in a script task. I then wanted to send out an email and include the incremented variable in the body of the message.
I ran into issues when I used the variable name "UnprocessedFileCount". The variable was incrementing within the loop as expected. However, it was always resetting back to "0" after the ForEach file Loop Container completed.
After some heavy searching on the subject, to no avail, I eventually found that changing the variable name did not reset the variable.
I'm still using SQL Server 2008.
View 3 Replies
View Related
Jul 30, 2015
I am facing a problem i just want total no row count and it should be show in header .So how can i do in SSIS
Suppose
eg. HeaderName , 3
data1
data2
data3
FooterName,3
View 5 Replies
View Related
Sep 4, 2015
I am developing a SSIS package with VS2013 to send data from SQL Server 2014 to an Excel Destination. But in the SSIS package, from the excel destination advanced editor, when I set the format of the excel destination external columns to double precision float DT_R8, it is returned to DT_WSTR automatically.Due to that, data sent to Excel are not processed as numeric but as text and formatted as such. I need the column to be created as numeric.
View 7 Replies
View Related
Jul 22, 2015
How do I add only new rows to a destination table (when copying a table from another database every night) ?Every night I am copying a number of tables from one database to another.I only want to insert news rows (that are not in the destination table, but are in the source table) to the destination table.I might normally drop the destination table and just copy over the whole table, but in this case rows can be deleted from the source table, but I want to keep these old rows in the destination table (to maintain history). So I only want to add in rows to the destination table that have been added to the source table since last time.I guess I could copy the whole of the source table to a temporary table in the warehouse, then use a T-SQL merge command to compare and just add new rows to the destination table- but suspect that this is not the best way.
View 8 Replies
View Related
Oct 25, 2010
I have a table is SQL server database A that is my source. I have another database B which is accessed via webservice call.(its a CRM server basically). My intention is to transfer data from A to B while B is accessible only via web service. I need to update existing one and create the missing one.
Currently I am using script component, and on every insertion of a row, i call the webservice to check if the record exist or not. If it exist I update it else create it using webservice call itself.
All this happen in Input0_ProcessInputRow(Input0Buffer Row) function.
Now this method is making 2n webserive call which is making the performance very slow.
I want to optimize the approach. Is there a way where I can retrieve whole set of rows in source table in preexecute(), filter it and store it in a List. This way, i just need to check the list a perform update ro create accordingly preventing my webservice call.
How to optimize this or even some better approach?
Its actually a CRM server and I am trying to update and create contacts in CRM sync with a database.
View 3 Replies
View Related
Oct 8, 2015
I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.
when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.
View 6 Replies
View Related
Jun 26, 2015
I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,
CREATE TABLE ##SiteTemp
(
LEVEL2 VARCHAR(20),
LEVEL3 VARCHAR(25)
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
View 3 Replies
View Related
Apr 22, 2015
I have to load data into destination table, it has foreign key relation to two different tables called person table and organization table . sample data to be loaded is like
person_id organization_id
1 Null
2 NULL
Null 1
null null
person table and organization table doesn't have null values in them, when I try to load this data none of them are laoded, I know either person_id or organization id having null value is failing foreign key constraint. But I want to transfer all the rows except the ones having both nulls. how this can be achieved ?
View 7 Replies
View Related
Nov 6, 2015
I have installed the SharePoint adapters from codeplex and they show OK in SSIS 2008R2. But in SSIS 2012, I can't find them and their is no SSIS component tab to pick it and add it to the toolbox.
View 2 Replies
View Related
Jun 1, 2015
I have a requirement to take xml file, in case the number of column changes, it should not fail the package, rather it should load the data in destination table. Destination table could be altered separately depending on xml schema by the DB team in production.
View 3 Replies
View Related
Jul 10, 2015
IS that possible to get teh output of a execute sql task to excel destination.I have query which will comapre the data difference between two databses. It will comapre all tables in both databses and list out the difference in data by each table. I need to run this query using SSIS and need to get the output to a excel sheet...I have used the data flow task to run this query but my query is giving some error when used with data flow task. So i have used excecute sql task and need to write teh out put to a excel sheet.
View 11 Replies
View Related
May 29, 2015
how do you load the multiple flat files to into destination dynamically?
View 9 Replies
View Related
Oct 6, 2015
How can I get table name and schema names of the source and destination in ssis package to insert into audit table....??
View 3 Replies
View Related
Nov 25, 2015
I am using SSIS integration between two database. Both databases are sql server 2008. using many integration but getting problem in two only only two integration giving problem, both are executing perfectly and out put also not showing any error.
but destination table not inserted/updated anything.
first issue integration is using data flow task with oledb source and destination.
second one is using execute task with for-eachloop container.
View 12 Replies
View Related
Sep 25, 2015
I have some duplicate records in my flat file. But i don't want to load those duplicate rows into my destination.
View 2 Replies
View Related
Sep 8, 2015
The only way to add a new column to an existing mapping that I know is to go to advanced editor and refresh. This however keeps only the default mapping (where the field names match), the rest is wiped out, so need to restore the mapping manually after that. Risky and annoying at the same time. Is there any alternative?
View 3 Replies
View Related
May 19, 2015
I am importing the Source: Excel 2007 (xlsx) to Destination:SQL Server DB Table..
One field had 739 records in that First 700 had General (i.e., Numeric ) last 39 had General(Alpha Numeric)
CT
-----
4564
45645
4548
0125
'''''
'''' 700 rows
ADF456
ADER156
DER1234
''''''
'''''39 rows
So I applied
:: REGEDIT:::
HKEY_LOCAL_MACHINESoftwareMicrosoftOffice14.0Access Connectivity EngineEnginesExcelTypeGuessRows ::TypeGuessRows value to zero (0)
IMEX=1
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=D:destination.xlsx;Extended Properties="Excel 12.0 XML;HDR=YES;IMEX=1";
But SQL Table Last 39 Records Dumped as NULL whichever is Alphanumeric. Why? Dynamically How Can I import without doing Text to column in Excel on that column ?
View 4 Replies
View Related
Jun 5, 2015
In my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation > Oledb Command
> Rowcount_Transformation1 > Oledb Command1
> Rowcount_Transformation2 > Oledb Command2
> Rowcount_Transformation3 > Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
View 7 Replies
View Related
