Integration Services :: Package Development For Pulling Data Into Excel Destination File From OLEDB Source

Sep 2, 2015

1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.

2. How to override the existing file in excel destination.

View 2 Replies


ADVERTISEMENT

Integration Services :: SSIS OLEDB Data Source - Flat File Generation

Apr 20, 2015

I am working to archive some old data from a data warehouse using SQL server and SSIS.  The data will be read and denormalized, then shipped out to a delimited text file.

The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).

There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required.  Wondering if there are performance advantages of an embeded query for the data source instead?

It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk. 

He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.

View 4 Replies View Related

Integration Services :: SSIS Not Pulling All Data From Source?

May 6, 2015

I have ssis package that pull data from SAP (Using ADO.net connection) to SQL server every night but i have noticed that all data from source is not getting pulled by package . package losing some amount of row.

View 7 Replies View Related

Integration Services :: Get Table And Schema Name Of Source And Destination In SSIS Package

Oct 6, 2015

How can I get table name and schema names of the source and destination in ssis package to insert into audit table....??

View 3 Replies View Related

T-SQL (SS2K8) :: Load Data From Flat File Source Into OleDB Destination By Changing Data Types In SSIS

Apr 16, 2014

I have an source file and i have to load it into the data base by changing datatype of the columns in ssis

View 1 Replies View Related

Integration Services :: Excel Destination With Run Date-1 Inside File Not The File Name

Aug 26, 2015

I have a ssis package where I need to have excel destination.  In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:

Data as of:  08/25/2015

if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same  Data as of:  08/25/2015. not today()-day(1).

I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of:  08/30/2015 which is not true. It should still stay Data as of:

 08/25/2015 on what ever date the excel file is open. The SSIS package  runs only once. 

How do I handle this so that whenever user open the file, they will see Data as of:  08/25/2015. This is not a column in excel. It is like a description of data in excel.

View 3 Replies View Related

Integration Services :: DefaultBufferMaxRows - Is It Determined By Row Length Of Data Flow Task Source Or Destination

Oct 18, 2015

We have a single generic SSIS package that is used to import several hundred iSeries tables into SQL. I am not looking to rewrite the process. But I am looking for ways to improve performance.

I have tried retain same connection, maximum insert commit size, lock table (tablock), removed some large columns, played with the log file location and size, and now I am working to tweak the defaultbuffermaxrows.

To describe the data flow task - there are six data flows tasks (dft)  working at the same time. Each dtf has their own list of iSeries tables and columns and the corresponding generic SQL table names. Each dtf determines their list of tables based on the number of columns to import. So there is dft30 (iSeries table has 1-30 columns to import), dtf60 (iSeries table has 31-60 columns to import), etc. The destination SQL tables are generically called Staging30, Staging60, etc. Each column in the generic Staging tables are varchar(100). The dtfs are comprised of an OLE DB Source and an OLE DB Destination.

The OLE DB Source uses a SQL Command from Variable to build a SELECT statement. The OLE DB Source uses a connection manager that uses an IBM iAccess IBMDA400 provider.  The SQL Command ends up looking like this for the dtf30. This specific example is importing from the iSeries table TDACLR and it only has two columns so it will be copied to the Staging30 table.

select TCREAS AS C1,TCDESC AS C2,0 AS C3,0 AS C4,0 AS C5,0 AS C6,0 AS C7,0 AS C8,0 AS C9,0 AS C10,0 AS C11,0 AS C12,0 AS C13,0 AS C14,0 AS C15,0 AS C16,0 AS C17,0 AS C18,0 AS C19,0 AS C20,0 AS C21,0 AS C22,0 AS C23,0 AS C24,0 AS C25,0 AS C26,0 AS C27,0 AS
C28,0 AS C29,0 AS C30,''TDACLR'' AS T0 from Store01.TDACLR

The OLD DB Source variable value looks like the following, but I am not showing the full 30 columns

select cast(0 AS varchar(100)) AS C1,cast(0 AS varchar(100)) AS C2,cast(0 AS varchar(100)) AS C3,cast(0 AS varchar(100)) AS C4,cast(0 AS varchar(100)) AS C5, ... cast(0 AS varchar(100)) AS C30.

The OLE DB Destination uses OpenRowSet Using FastLoad From Variable. The insert into Staging30 ends up looking like this.

insert bulk STAGE30([C1] varchar(100) ,[C2] varchar(100) ,[C3] varchar(100) ,[C4] varchar(100) ,[C5] varchar(100) , ...  ,[C30] varchar(100) ,[T0] varchar(20)

Of course we then copy and transform the Staging30 data to the SQL table that equals T0.

But back to defaultbuffermaxrows. Previously the dtfs had default values of 10000 for DefaultBufferMaxRows and 10485760 for DefaultBufferSize. I added a SQL task to SUM the iSeries column sizes, TCREAS and TCDESC in this example, and set the DefaultBufferMaxRows by dividing the SUM of the columns max_length into 10485760. But I did not see a performance improvement. Do you think that redefining the columns as varchar(100) for the insert is significant? Should I possibly SUM the actual number of columns (2) as 2x100 or SUM the 30x100?

View 4 Replies View Related

Integration Services :: Source Excel File Causing Failure In Agent

Aug 13, 2015

I have a package from SQL Server 2008 R2, that loads data from .xlsx file to database table.There are total 15 columns and 14000 rows in the .xlsx. The package runs fine in BIDS. But the same package in SQL Agent fails with error "omponent "Excel Source" (1)" failed validation and returned validation status "VS_ISBROKEN".

When I tried to run the package by deleting the half of the records for first 7000 rows it ran successfully in agent. Then the second half (last 7000 rows) also succeed from agent job. So, there is no issue with the data/datatypes.The agent job is able to run with record upyo 11000 rows in .xlsx. When I am running for 12000 rows it is failing.Is there any problem with the number of records in .xlsx or size through SQL Agent?

I am running the package from a Proxy account in sql agent job.

ERROR:
Error: Executed as user: PROXY_ID. Microsoft (R) SQL Server Execute Package Utility Version 10.50.6000.34 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 10:36:09 AM Error: 2015-08-10 10:36:10.87 Code: 0xC0202009 Source:
XX Connection manager "Excel Connection Manager 1"

[code]....

View 5 Replies View Related

Integration Services :: Mixed Data Types In Excel Column To OEDB Destination

May 19, 2015

I am importing the Source: Excel 2007 (xlsx) to Destination:SQL Server DB Table..

One field had 739 records in that First 700 had  General (i.e., Numeric ) last 39 had General(Alpha Numeric)

CT
-----
4564
45645
4548
0125
'''''
'''' 700 rows
ADF456
ADER156
DER1234
''''''
'''''39 rows

So I applied

:: REGEDIT::: 
HKEY_LOCAL_MACHINESoftwareMicrosoftOffice14.0Access Connectivity EngineEnginesExcelTypeGuessRows ::TypeGuessRows value to zero (0)
IMEX=1
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=D:destination.xlsx;Extended Properties="Excel 12.0 XML;HDR=YES;IMEX=1";

But SQL Table Last 39 Records Dumped as NULL  whichever is Alphanumeric. Why? Dynamically How Can I import without doing Text to column in Excel on that column ?

View 4 Replies View Related

Integration Services :: Automating SSIS Package For Different Source File

Sep 22, 2015

I want to design an SSIS package that loads data from files into SQL Server and I want to automate the process. My major issue is that the source file doesnt come in the same format. Some times I comes in either .csv , .xls , .txt or even .rpt file format. Is there a way I can write a code that checks through my folder and based on the available format on the folder it loads the value in ssis.

View 2 Replies View Related

Integration Services :: Loading XLSB File Using Excel Source Component In SSIS

Aug 5, 2015

How to load .xlsb file using Excel source component in SSIS. Below is the connection manager i see in the properties window.

Provider=Microsoft.Jet.OLEDB.4.0;Data Source=;Extended Properties="Excel 8.0;HDR=YES";

Do I need to change any values here to process .xlsb file

View 2 Replies View Related

Integration Services :: Network Path For Flat File Destination - Cannot Open Data File

Apr 6, 2015

I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me  error " cannot open data file" ...

Nothing is wrong with package.

View 10 Replies View Related

Integration Services :: SSIS - WebServices To OLEDB Destination

Oct 8, 2015

I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.

when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.

View 6 Replies View Related

Integration Services :: Using Temp Table As OleDB Destination

Jun 26, 2015

I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow, 

CREATE TABLE ##SiteTemp
    (
      LEVEL2 VARCHAR(20),
      LEVEL3  VARCHAR(25)

Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....

I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.

View 3 Replies View Related

Execute A Flatfile Source To Oledb Destination For Each File In A Folder.

Jan 24, 2007

Hello, I wanted to do the following.

Copy a full directory from source to destination (Done)

then for each file on the destination directory,it must process that file and insert rows on the table.

So I created a foreach loop, and created a varriable aclled CURRENTFILENAME, and assigned it into the foreachloop to index 0.



Inside the foreachloop I created a dataflow task, in the dataflow task I dragged a flat file source and an oledb destination, but I noticed that the flat file source requires flat file manager, and the flat file manager requires a unique FILE NAME. I cant put this c:copia*.txt.

I took a loot at flat file source properties and it has associated the flat file manager, but I can not assign the filename to the variable from the foreach.



Any ideas please



View 5 Replies View Related

Integration Services :: Can't Preview Data In Excel Source Editor Unless Sheet Is Open?

Nov 10, 2010

I have a package which has an Excel source with the 'Data access mode' set to SQL command and then a sql select statement.  When I try and hit the 'Preview...' button below the 'SQL command text' window I get the following error:

 "Error at Standard Data Flow Tasks [source tasks name]: No column information was returned by the SQL command"
 
Ordinarily this would be down to the fact that my SQL is shocking, I hit the 'Preview...' button whilst the workbook the source is pointing at was open and it works fine??
 
I can't figure this out, but needless to say the package errors with a NEEDSNEWMETADATA when I try and run it.

View 17 Replies View Related

Integration Services :: Audit Logging In Table With Multiple OLEDB Destination And Command

Jun 5, 2015

In my package there are 10 DFT.

Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation  >   Oledb Command
                                                                                
> Rowcount_Transformation1 >  Oledb Command1
                                                                                
> Rowcount_Transformation2 >  Oledb Command2
                                                                                
> Rowcount_Transformation3 >  Oledb Command3

All update hapend on diffrent Table.I want to log in Audit table .

My audit table like

Table_Name   Insert_count  Update_count

How can I log the package having multiple OLEDB Destination.

View 7 Replies View Related

Integration Services :: SSIS Excel Data Source Numeric Values Returned As Null

May 8, 2009

I'm using SSIS 2005 Enterprise edition,  I'm creating a package that reads an excel (xls) file using the "excel source" component, and it dumps the data into an OLEDB destination (a sql server). When I drag the excel source component and create the excel connection to my file the component automatically reads the columns and their datatypes.

The problem is that I have a column which has numeric data and the package uploads as NULL every number that starts with a zero. (note: in excel this column is formatted as "text", despite it has only numbers, because it's the only way excel maintains the left sided zeros).

So I checked the data types by right clicking the excel source component -> show advanced editor and my surprise is that this column's data type is detected as double-precision float, and it doesn't let me change it. URL... but it only works when the first row of data has a number beginning with zero on this column. How to get the data imported correctly?

View 15 Replies View Related

Data Flow Task - OLEDB Source / Destination

Nov 9, 2006

Hi

Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.





MA

View 4 Replies View Related

Integration Services :: Pulling File Based On File Properties

May 6, 2015

I have a task for which I have to load csv file from a shared directory into sql table. Right now I'm stuck with a road blocker, The issue is the shared drive contains all the history files as well and I have to pick only the latest file. But I cannot identify latest file based on the file name because it doesn't contain any date in the file name. However by seeing file properties I can pull latest file. 

Sample file name: XXX_XXX_XXX_XXX_XXX-5814201.csv

Is there any way we can automate this in SSIS with file properties and picking the latest one?

View 12 Replies View Related

Integration Services :: Excel Sheet Not Visible In Excel Destination

Sep 14, 2015

I have ssis package where I have excel connection manager with expression pointing to a variable which has path for location and name of excel spreadsheet to be create each with date on the name.ExcelFilePath points to variable for shared location where excel file will be saved.I have File system task for copying template excel file to destination location with date in file name.I drag and drop excel destination.  Pointed to excel connection manager. Under data access mode, I have select table and view.  When I try to select name of excel sheet,  it says, no tables or views could be loaded. I should be able to see sheetname there so that I can map column. I only have option to create new spreadsheet. I want to use template to load data in excel file. I dont want to create new sheet.  It was working before. But I opened the ssis package and its broken. I was able to see spreadsheet name before but I dont see it now even though I have not made any change to package. XCEL 12.0 XML;HDR=NO";

View 5 Replies View Related

Integration Services :: Package Failed After Changing Password In Shared Data Source

Jun 19, 2015

I'm using a shared data source to connect an Oracle server in my packages.  After changing the database user password in the shared data source, I noticed the package concerned would fail with the following description.

Source: "OraOLEDB"  Hresult: 0x80004005  Description: "ORA-01017: invalid username/password; logon denied".

Is there a way to ensure the packages will use the latest information in the shared data source?  I did do a Rebuild before executing the packages.

View 5 Replies View Related

Integration Services :: Will Exceeding Command Timeout On OleDB Source Fail Pkg

Jun 16, 2015

We run std 2008 r2.  I'm trying out the commandtimeout property of an oledb source.  I set it to 30 expecting 30 seconds.  if connection and or execution exceed that threshold, will the pkg fail?  Either way is there a way I can detect that the threshold was exceeded? 

View 3 Replies View Related

Integration Services :: SSIS 2008 R2 Package Is Pushing Data Down In Excel 2010 64 Bit

Jul 2, 2015

I have package which pulls data from db table and creates a excel file extract.The flow is like this - A excel file template sits in the input folder folder for processing .The package starts by dropping excel sheet in the excel(which is clearing any data and columns available) once that is done it has script task which creates a new columns for the sheet and gives a sheet name as well .Then a execute sql task runs and pumps data into a table which  serves as a source for the excel extract process .The excel extract process involves pulling data from the table and doing data conversion before it moves it into the oledb destination (excel file on file server).When I run the package I go and see that data is pushed down . I see top rows say 100 are empty and data appears after say 100 rows .

I tried deleting excel file and replacing with new one empty with columns and sheet name only but still it doesnt work?I am trying to understand what is making ssis behave like this and what can I do overcome the problem ?I read on google that we need to bring in file system task will move a template to working directory which is input folder but I dont want it to incorporate that logic as we need to push this package to production ASAP with very minimal change.

View 3 Replies View Related

Integration Services :: Cannot Find SharePoint List Source And Destination

Nov 6, 2015

I have installed the SharePoint adapters from codeplex and they show OK in SSIS 2008R2. But in SSIS 2012, I can't find them and their is no SSIS component tab to pick it and add it to the toolbox.

View 2 Replies View Related

Integration Services :: Dynamic Mapping From XML Source To Destination Table

Jun 1, 2015

I have a requirement to take xml file, in case the number of column changes, it should not fail the package, rather it should load the data in destination table. Destination table could be altered separately depending on xml schema by the DB team in production.

View 3 Replies View Related

Integration Services :: Cannot Set Excel Destination To Numeric

Sep 4, 2015

I am developing  a SSIS package with VS2013 to send data from SQL Server 2014 to an Excel Destination. But in the SSIS package, from the excel destination advanced editor, when I set the format of the excel destination external columns to double precision float DT_R8, it is returned to DT_WSTR automatically.Due to that, data sent to Excel are not processed as numeric but as text and formatted as such. I need the column to be created as numeric.

View 7 Replies View Related

Error When An OLEDB Source Points To An OLEDB Destination.

Oct 10, 2006

Hi all,

I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.

But i got the below error:

Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.

Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".

Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.

Error at Data Flow TaSK: There were errors during task validation.

(Microsoft.DataTransformationServices.VsIntegration)



View 5 Replies View Related

Integration Services :: Reading Data File Present In A File System From A Package Deployed In SSIS DB?

Dec 4, 2014

I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?

View 7 Replies View Related

Excel Destination Appends The Excel File Everytime A Package Is Executed

Dec 18, 2006

i have an SSIS package that exports to an excel file. This works fine. the problem is that it appends the data instead of overwriting the file. Is there any way to overwrite the file like you can with a flat file? I have to email the file everyweek and don't want to have to clear it out manually. Any help would be appreciated

View 2 Replies View Related

Integration Services :: SSIS Data Type From Excel File

Jun 9, 2015

I have excel column with numeric and special character values , when I take that into SQL table using SSIS, the special character values enter as null value.  the example column values are given bellow

1
2
2/1 
1/2
1/2 means 1 or 2 ,

how can I read this values exactly into SQL table?

View 13 Replies View Related

Integration Services :: Pulling Data From Oracle With SSIS

Jul 7, 2015

I am trying to pull data from an Oracle Db using SSIS. If I use the Table/View option in the Access Mode option on the OLE DB Source component, it works fine. But when I use the SQL Command option, the processing get stuck at Pre-Execution stage.... (for days).

View 2 Replies View Related

Integration Services :: Excel Column Turns To Blank / NULL While Import Using SSIS Excel Source 2008

Jul 6, 2015

While importing data from Excel source , some column is getting null value even though excel column has value.To Resolve the issue we tried with

HKEY_LOCAL_MACHINESOFTWAREWow6432NodeMicrosoftOffice14.0Access Connectivity EngineEnginesExcel

1.Change the Value  of the Row TypeGuessRows from 8 (Default value) to 0  and ImportMixedType = text

• xls
HKEY_LOCAL_MACHINESOFTWAREMicrosoftJet4.0EnginesExcel

1.Change the Value  of the Row TypeGuessRows from 8 (Default value) to 0  and ImportMixedType = text

the connection string of the excel

UPPER(REVERSE(SUBSTRING( REVERSE(@[User::VarInputExcelFile]), 1, 5) ) ) == ".XLSX" ? "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + @[User::VarInputExcelFile] + ";Extended Properties="Excel 12.0;HDR=Yes;IMEX=1";":"Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=" + @[User::VarInputExcelFile] + ";Extended Properties="EXCEL 8.0;HDR=Yes;IMEX=1";"

by doing the above setting also , the column is coming as null from excel source even though there is data in excel.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved