Integration Services :: Store Multiple Config In Single Table Using SSIS Configurations?
Oct 20, 2015I want to store multiple config files into single table I am unable to do it.
View 8 RepliesI want to store multiple config files into single table I am unable to do it.
View 8 Replies I have created an SSIS package which processes daily financial information to a sql server database. These processes are to be outputted to excel spreadsheets to a readable report format for management to review. Some of these reports are laid out in a way that is not just tabular output but requires customized placement of data on an excel spreadsheet to specific cells.
I am able to place an initial resultset of a query output from the database in a tabular excel template through SSIS but the issue is at the end of that placement in the spreadsheet I am required to place another output below that tabular output in a different format from the initial output which I have shown below.
I have a delimited text file with 650+ columns. The sum of the column lengths of a single row, if fully populated, exceeds 30K bytes. The "killer" fields lengthwise are the "Description" fields. If they were removed from the input file, the remainig columns would occupy about 5000 bytes, which is within SQL max row length.
Can SSIS be used to created these two tables? (one without description fields, the other with those field but arranged vertically in the table rows).
The fundamental issue is I can not import a single file row into a sql table because that row length could exceed the max byte count for a row.
Here is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
ID key1 key2 key3 key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
After developing SSIS Package (.dtsx file) if I need to deploy to all environments dynamically, then how can I create .dts config file and mention properties in it ?
View 6 Replies View RelatedHi All,
I am working on a project currently where we have many SSIS packages and we want to minimize the number of config files to be used. What I was thinking was using one master config file which will have Server/Database info which will be used by all the packages. Now the thing is there are multiple packages which are being executed from within a master package and I was wondering if this will be an issue. Is there anything else that I will have to keep in mind? Any help is appreciated.
Thanks
I have one package through for each loop container I am loading all flat files into target table and its working fine.Now I my requirement is to capture the .txt file and loading into sqlserver table.Please check below file name.
CCCLOC_DDDLOC_LOC_20151203_240000_trigger.txt
from above file name I have to derived below detail.I have variable @File_Name which is used to stored the file name at rune time.Now I want to derived 5 values from the file name as below
Clientname=CCCLOC
Partnername=DDDLOC
Entity=LOC
Creationdate=20151203
Creationtime=240000
how to write expression for above situation.
My Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?
View 3 Replies View Relatedi have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
I have an excel file that has multiple sheets and I need to import data from each separate sheet to a separate table using SSIS.
E.g. Sheet A data should go to Table A and Sheet B data should go to Table B and so on. Is it possible to do this with out using script task.
I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure. I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container. The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure ?" within the "Execute SQL Task". The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one. I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task". How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?
View 4 Replies View RelatedSQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started: 11:04:59 AM
Error: 2014-03-27 11:05:31.12
Code: 0xC001602A
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
I've built an SSIS package in SSDT 2014. The package was running successfully
When I close and open the package it hangs on validation of single task out of all.
OLEDB DESTINATION Task
I have tried several times to close the SSDT and open but facing same issue.
These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?
I've read that a single config file can be used across multiple packages, but am unsure if it applies to what I'm trying to achieve. As an example, I have 2 packages, PackageA and PackageB. Each package has a connection manager defined - ManagerA and ManagerB and I want a single package configuration file to contain the connection string for each manager.
I can define the package configuration of PackageA with no problems. I choose XML file, define the filename and add the connection string to the config.
I then open PackageB Package Configuration and point it to the existing config file, IS tells me the file already exists and allows me to choose the option to "Reuse Existing". I then supply a configuration name and the wizard finishes, without letting me expose any properties. At this point, the configuration file still contains config details from PackageA.
If I then choose to Edit the package configuration in PackageB, I get a warning saying the config values in the config file (relating to PackageA) cannot be found, and the wizard continues. The subsequent PackageB properties which I add overwrite the existing PackageA properties.
So it would appear that what I'm trying to do cannot be done, and I need a separate configuration file for each package?
Any ideas much appreciated.
Greg.
I need to do something like this in SSIS:From one SQL table I need to get some id values, I am using a simple sql query:Select ID from Identifier where value is not null.I've got this result:As a final result I need to generate and set a variable in SSIS with the final value:
@var
= '198','120','ACP','120','PQU'
Which I need to use later in a odbc expression.How can I do this in SSIS?
I have an SSIS package in VS 2010 that uses flat files to load database tables. I would like to check for the flat files existing before continuing to run the package. The flat files each have their own connection manager. I was wondering if I could use the connection managers to determine the file names instead of creating a Script Task and hard-coding each of the file names to check.
View 4 Replies View RelatedHi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
I have one scenario
Table
Col1. Col2
1. A,b,c,df,ghf
2. C,b
3. B
Output should be
Col1. Col2
1. A
1. B
1. C
1. Df
1. Ghf
2. C
2. B
3. B
I have been tasked to do the following using SSIS.
We received two csv files each week and we would like to load these files to two different sql server tables using SSIS.
These files should be archived into a folder after each load.
How can I achieve this?
I need to export multiple tables from a database to multiple csv files (one for each table).
Rather than use SSIS and have multiple OLEDB sources and destinations (one for each table), is there a way to have a generic package that will export all the tables in the database ?
One way I can see is to use BCP in a loop - with the loop powered by a select statement that links to something like sys.tables etc, (or another table that i prepped with just the tables I want if I dont want them all).
i.e I would use a stored procedure that uses BCP (called via XPcmdShell) - so not via SSIS - although I could wrap up the whole thing in SSIS - but there is no realy need.
I work in the healthcare area, and am handling the survey data ETL's. There are around 8 different survey areas and based on information received from them for the visit they reference, I want to pull in more info from our invoicing database. My idea is this:
1.) Pull in the flat file to an ODBC staging table
2.) Cache all invoice records that fall between the MIN(Date of Service) and MAX(Date of Service) from the staging table.
3.) First lookup the information needed on patientID, providerID, date of service, and billing location.
4.) For the surveys that didn't match on those 4 columns, try looking up based on patientID, date of service, and billing location (since I could be 99% sure this would still return the record I need).
5.) For the remaining surveys, lookup based just on patientID and date of service. These records will be flagged for manual review because clearly, if a patient has multiple appointments in the same day, this will be prone to error.
However, in trying to use only 3 of the columns in the lookup, I get the error saying basically that I need to utilize all 4. Is there a way around this, or is there an entirely different way I should be approaching this? The reason I thought cache transform was the answer is because I will need to run a different package for each lookup, as the data and logic between each survey will vary, but the invoice data "pool" will stay the same regardless.
How to purge data in transaction table or we can delete some data and store in separate table in data warehouse?
View 7 Replies View RelatedI need to import multiple flat files with different formats into different tables of the sql server database and not able to figure out the best way out in ssis to do so...
What are the possible methods in ssis to do so and if possible the process which can be dynamic as file names or columns might change in future.
We are building a dataload application where parameters are store in a table. And there are multiple packages for each load.There is a column IsChecked column if it is 1 then only the child package should execute.Created a master package. In which i have taken execute SQL task in that storing a results in variable and based on the result the child package should execute. But In executesql task i selected result set as full result set. I am getting the below error.
[Execute SQL Task] Error: Executing the query "SELECT isnull(ID ,0) AS ID FROM DataLoadParameter..." failed with the following error: "The type of the value (DBNull) being assigned to variable "User::LoadValue" differs from the current variable type (Int32). Variables may not change type during execution. Variable types are strict, except for variables of type Object.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I have multiple xml data file in a directory say C:XMLData abc1.xml, abc2.xml, abc3.xml etc.
Need to loop through each file in ssis with Foreach loop container, and get the file name say abc1, and load the data of abc1.xml to abc1 table in sql server DB.
Next iteration will pick up the abc2.xml and find the abc2 table in sql server DB then insert the data in abc2 table.
While each iteration, xml source should also point each xsd file correspondingly.
Tables are already created in DB
I solved my problem up to getting the file name from ech iteration and assigned file name to variable, in oledb destination data access mode I select Table or view name variable, then corresponding table will get selected for data insertation.
Just wanted to know how can I read each xsd file for each xml data files while iteration.
I have 5-6 table and wanna to make sure if I'm using any of them in my Packages and I do have 100 Packages.shortest way to search these tables in Packages.
View 2 Replies View Relatedwe can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
I have been strunggling to find solution to convert XLSX files with multiple sheets to csv file.
Requirements
>> Convert XLSX file with multiple sheets to CSV file
>> CSV file names : XLSX filename + '_' + sheet name
>> scirpt has to be in VB as i am using ssis 2005
>> I started develping scirpt using Micorosoft.office.interop.Excel.dll . this dll is referenced to script task.
>> found web link as useful.. [URL] ....
was hoping someone couild provide some insight into a problem I'm trying to solve.
I have a table called SEARCHCRITERIA. It consists of a USERID column and a CRITERIA column. Users will be able to search for other users based on a set of criteria. There are 5 total criteria a user can choose. They can choose as few as none or all five. I'd like to store the criteria chosen as a single number in the SEARCHCRITERIA table. Then use a function to parse out the criteria. For example:
CRITERIAID CRITERIA CRITERIAVALUE
1 AGE 2
2 SEX 4
3 GRADE 8
4 LOCALE 16
5 REGION 32
A user performs a search based on AGE, SEX, and LOCALE. I would then store the value 22 (the sum of 2, 4, and 16) in the SEARCH table. I would then need a function to pull out the three individual values.
Has anyone done anything like this before?
If so, any help would be appreciated!
Thanks in advance!
How to read multiple excel sheets in same excel file with different table schema.
Basically need to load data into tables from these excel sheet.
So I know how to dynamically read multiple excel sheets in same excel file with same table schema and load into one table.
But how to do this dynamically for multiple excel sheet with different table schema and load into different tables?
I have a requirement to load multiple flat files in target table .
I have created the package which used to load files into target table using For each loop container.
But now requirement has been changed now I have to take only those files from table where status="Success" and max JobId. By the query I am to get those records which need to load into table.
Below query I am using to get the files which need to load.
select [JobLogKey],[SrcNm],[DestNm]
FROM [ConfigRep].[dbo].[JobLog]
Where [JobId]=
(Select Max(cast([JobId] as Int)) Jobid
FROM [ConfigRep].[dbo].[JobLog]
Where [JobStat]='Success')
Output:-
JobLogKey SrcNm DestNm
268 H:Data PlatformSource FileClient2LocHGSSpecLocation.txt Location.txt
269 H:Data PlatformSource FileClient1LocHGSSpecLocation.txt Location.txt
I have to load using above 2 files which are under SrcNm. I have created one variable called FileToLoad as Object and mapping to result set of above query. I have create JobId,SrcNm and DestNm variable to catch the record at every loop. I have created 2 For each Loop container
Below screen shot of outer Foreach loop. Till here Its working fine. Inner for each loop container not executing any task under that. How to get it done.
Is there any way to use a single record (Which had Connection String) for all my packages in the project ?
I don't want to have multiple connection informations for each of the packages (Based on Configuration Filter)