Integration Services :: Using SSIS To Call A Stored Procedure On AS400 Iseries DB2?
Jun 4, 2015
I have developed an SSIS Package which uses an ODBC connection to an AS400 iseries stored procedure. I use an Execute SQL Task. The query is Call Doctrack.PubFeed(?,?,?,?). The procedure takes 2 input parameters and 2 output parameters (3rd and 4th parameters) The data types of the output parameters are an integer and varchar. As part of the procedure data is inserted into a table on the iseries.
When I run the package using breakpoints to view the values of the variables I see that the stored procedure returns values for the output parameters and the execute SQL task is a success and proceeds to the next task in the package. The whole package ends successfully.However, when the table on the iseries is checked nothing has been inserted into it. To test further, I manually run the procedure on the iseries using the same parameters. The run is successful. And when the table is checked, there are in fact new rows inserted.
What can possibly be the issue since I am not getting any errors when I run the package? Oh I should add that prior to the execute Sql Task, there is a data flow task which moves data from a SQL Server database to a table on the iseries (successfully) using the same ODBC connection. The execute sql tasks uses that information for the Stored procedure.
I had the SP, I want to call in Script Task , had the Result set data value then I need pop up message box. So how can I call stored procedure result in message box in ssis script task using C#.
and I want to use SSIS -OLEDB connection.
ConnectionManager cm; System.Data.SqlClient.SqlConnection sqlConn; System.Data.SqlClient.SqlCommand sqlComm; cm = Dts.Connections["OLE_TEST_"]; sqlConn = (System.Data.SqlClient.SqlConnection)cm.AcquireConnection(Dts.Transaction); sqlComm = new System.Data.SqlClient.SqlCommand("Exec dbo.sOp_xx_XXXe_VXX 280", sqlConn); sqlComm.ExecuteNonQuery();
We are having trouble connecting to an IBM DB2 on iSeries data source in SSIS. In SQL2000 DTS we had no trouble connecting to this data source using an ODBC DSN. We have tried using the OLE DB providers for iSeries that comes with SQL2005. We are able to connect, but are unable to retrieve column information to use in mapping to a SQL2005 data destination. Has anyone successfully made this type of connection and data flow in SSIS? If so, please tell us how you did it. Thanks in advance!
I'm trying to create a file using a stored procedure with SSIS. I've tried to use the Execute SQL Task, but it will not create a file nor output to that file. I'm using "Full result set", but I don't know how to sent the result to the file. Is there another Control Flow Item I need to use?The reason why I'm using SSIS and not SQL Server Agent is because the file name must contain a timestamp.
I have a stored proc that is returning the results I need for output to .txt file.
Is there a way in SSIS to commit 50K (or whatever number) row batches at a time or should I just handle this in the stored proc?
select * into #TempTable from SomeTable [WHILE LOOP] --throttle commit batches of 50K rowcount select * from #TempTable [END LOOP] drop table #TempTable
But If I'm doing this in SSIS, I can't drop the #temp table otherwise I have nothing to output right?
We are executing a SSIS package using a xp_cmdshell command in a SP as shown below. This package does consumes time to execute almost 90 minutes and does get executed successfully too. But the strange thing is we don't get the result in @result variable just because somehow the next sql statement after the below highlighted statement doesn't get executed at all. After checking execution stats for the SP using the query attached below we observed that somehow the SP vanishes out of the execution stats for the server.
How do we connect and get data from SAP database using SSIS 2012/2014.Currently we are extracting data using WebService, and BAPI function call for RFC, but it seems not so much reliable, due to timeout and others. ion providing the link for download of .NET Framework Data Provider for mySAP Business Suite and some sample to invoke and get the data using SSIS.
I would like to find out how would I call an AS400 (IBM DB2) iSeries Stored Procedure from within my SSIS Package. What tasks should i be using? and do I need any additional adapters installed on my machine to access AS400(IBM DB2). Thanks.
we can assign one parameter value for each excecution of [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??) 2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
I have to transfer data from source to destination using stored procedures result set. There might be some more transformation needed to store the final result in the destination table.
I am trying to use SSIS to update an AS400 DB2 database by calling a stored procedure on the AS400 using an OLE DB command object. I have a select statement running against the SQL Server 2005 that brings back 20 values, all of which are character strings, and the output of this select is piped into the OLE DB command object. The call from SSIS works just fine to pass parameters into the AS400 as long as the stored procedure being called does not have an output parameter defined in its signature. There is no way that I can find to tell the OLE DB command object that one of the parameters is an output (or even an input / output) parameter. As soon as one of the parameters is changed to an output type, I get an error like this:
Code Snippet
Error: 0xC0202009 at SendDataToAs400 1, OLE DB Command [2362]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
Error: 0xC0047022 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Command" (2362) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at SendDataToAs400 1, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202009. There may be error messages posted before this with more information on why the thread has exited.
Information: 0x40043008 at SendDataToAs400 1, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at SendDataToAs400 1, DTS.Pipeline: Cleanup phase is beginning.
Task failed: SendDataToAs400 1
Warning: 0x80019002 at RetrieveDataForSchoolInitiatedLoans: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at Load_ELEP: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Load_ELEP.dtsx" finished: Failure.
I really need to know if the call to the AS400 stored procedure succeeded or not, so I need a way to obtain and evaluate the output parameter. Is there a better way to accomplish what I am trying to do? Any help is appreciated.
I would like to call a oracle stored procedure which looks like this
Create procedure in oracle sql plus
CREATE OR REPLACE PACKAGE GroupsPackage AS TYPE CURSOR_TYPE IS REF CURSOR; PROCEDURE usp_SelectGroups (results_cursor OUT CURSOR_TYPE); END; / CREATE OR REPLACE PACKAGE BODY GroupsPackage AS PROCEDURE usp_SelectGroups (results_cursor OUT CURSOR_TYPE) AS BEGIN OPEN results_cursor FOR SELECT GroupID, GroupName, GroupDescription, LastUpdateDate FROM Groups ORDER BY GroupName; END; END; /
Execute procedure in oracle sql plus
set autoprint on; var x refcursor; groupspackage.usp_selectgroups(:x); end; /
This works in sql plus. But when I try to run the same (or tried everything) in the execute statement in ssis using execute sql task, I am not able to make it work. I am getting an error message. Please advice, what am I doing wrong. Or is this possible or is there any other way to get this working.
I have created a stored procedure on the iSeries that creates a cursor and opens it. I am trying to write my report to use the stored procedure. I cannot get the data source to work. How do I create my data source so that it uses the stored procedure? My SP has three parameters I am trying to pass from the report. The parms are created in the layout.
I have a very anoying problem with SSIS. I've done new packages into same project, almost identical compared to old ones. They work well in visual studio, but I can't execute them using procedure. Old packages works just fine, but none of the new. Error message is in the end of my story.Visual Studio version is 9.0.30729.1 and SQL Server version is 10.0.4000.0. Is it possible, that these not not updated versions could cause this problem?Package ProtectionLevel is DonSaveSensitive.
Error messages, when package is executed by procedure: Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. NULL Started: 10:36:48 AM Error: 2015-03-31 10:36:48.48 Code: 0xC0016016
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Is it possible to execute a stored procedure from an Integration Services package? I see that its possible to enter sql commands that can be run but when a command to execute a stored procedure is entered the system cannot find the stored procedure (eventhough 'use mydbname' preceded it.
I am trying to read a flat file that contains a number like 256395 for example. I want to store this as a variable then pass it onto a stored procedure to run then saves the results to a flat file.
I have a stored proc that is being executed from an OLE DB Source component in my Data Flow. Takes one input parm, has several variables declared within, a derived table which is used in a join and all within a try catch block with transaction handling. No updates, just returning data, works great, except now I have been asked to replace these stored procs with inline queries.
ALTER PROCEDURE [dbo].[usp_Get_Test] ( @numberOfMonthsint ) AS BEGIN SET NOCOUNT ON set transaction isolation level read uncommitted
[Code] ....
The problems I have run into so far are...
SQL command text in OLE DB Source Editor does not like: - TRY/CATCH block - Will not let me use my input parm (@numberOfMonths int) - When I hard code in my input parm (select @BeginDate = dateadd(MONTH, -1, GETDATE())) I can parse query and run the step but no results are returned. So I am let to assume that it does not like the @TESTY derived table.
The query here as a sample has had pivots removed as well, but research suggests this should be an issue in the SQL command text.
Also, I know not even to try the Build Query... cause it will complain about any variable declarations (i.e., declare @BeginDate datetime).
For instance, can I pull this off with an Execute SQL Task? The problem is I don't see this available in the toolbox for the Data Flow.
Also, would my error handling be done in the Event Handlers tab now and if so, is there a good example of this?
I am run a stored procedure using Execute SQL task in, I want to log information of number of record inserted update in my table. I want to enable SSIS logging after from where I get information number of record inserted update.
I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure. I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container. The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure ?" within the "Execute SQL Task". The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one. I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task". How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?
I'm executing Oracle procedure, which has three OUTPUT parameters and returns results in table type variable. i should not use ODBC, MSDAORA providers to call the procedure. So I'm planning to using Oracle OLEDB provider. I'm able to execute the procedure successfully, but when i do check (while dr.Read()) its not returning any records. But I know as per stored procedure results, it should return 66 records.
Dim conn As New OleDbConnection Dim cmd As New OleDbCommand Dim dr As OleDbDataReader Dim QSQL As String
I'm hoping someone has tried something similar before. I am trying to run an integration from a remote computer using a web service. I have set up the web service and the bog standard launch package routine works fine. What i'd like to be able to do is to launch a package and also specify any parameters associated with it. I have the following code which is identcal to the main launch sub with the exception of an extra argument (jagged array of varible name and value variablePair[4][2]). It also processes the variable array and sets them on the DTSPackage object.
[code] [WebMethod] public int LaunchSSISPackageWithVariables(string sourceType, string sourceLocation, string packageName, string[][] variableArray) { string packagePath; Package myPackage; Application integrationServices = new Application();
// Combine path and file name. packagePath = Path.Combine(sourceLocation, packageName);
switch (sourceType) { case "file": // Package is stored as a file. // Add extension if not present. if (String.IsNullOrEmpty(Path.GetExtension(packagePath))) { packagePath = String.Concat(packagePath, ".dtsx"); } if (File.Exists(packagePath)) { myPackage = integrationServices.LoadPackage(packagePath, null); } else { throw new ApplicationException("Invalid file location: " + packagePath); } break; case "sql": // Package is stored in MSDB. // Combine logical path and package name. //if (integrationServices.ExistsOnSqlServer(packagePath, ".", String.Empty, String.Empty)) if (integrationServices.ExistsOnSqlServer(packagePath, ".", "executeSSIS", "p4ssw0rd")) { //myPackage = integrationServices.LoadFromSqlServer(packageName, "(local)", String.Empty, String.Empty, null); myPackage = integrationServices.LoadFromSqlServer(packageName, "(local)", "executeSSIS", "p4ssw0rd", null); } else { throw new ApplicationException("Invalid package name or location: " + packagePath); } break; case "dts": // Package is managed by SSIS Package Store. // Default logical paths are File System and MSDB. if (integrationServices.ExistsOnDtsServer(packagePath, ".")) { myPackage = integrationServices.LoadFromDtsServer(packagePath, "localhost", null); } else { throw new ApplicationException("Invalid package name or location: " + packagePath); } break; default: throw new ApplicationException("Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'."); }
//Variables var = myPackage.Variables; //foreach (string key in variablePairs.Keys) //{ // var[key].Value = variablePairs[key].ToString(); //}
Variables var = myPackage.Variables;
for (int i = 0; i < variableArray.Length; i++) { var[variableArray[0]].Value = variableArray[1].ToString(); }
return (Int32)myPackage.Execute(); } [/code]
For some reason the above code runs and passes back the value that it succeeded. Yet the package doesn't do what it should. Does anyone have any ideas as to why this might be the case or even a better way to pass the variables.
I just got done finishing an Integration Services Project (which I have to say was sickening easy!) which does the following:
1) Imports a comma delimited txt file
2) Exports it into a table
3) I do some manipulation and other table creation using SQL
4) Outputs a table to a flat file again
I now need to allow the user to run this process. I'd like to either:
a) Provide them a shortcut that when clicked on their desktop starts the process that I have defined in my Integration Services Project
b) Better yet, create a web U I that has a button they can click on, something that shows the progress in time, and then provides the output file as a downloadable link
I'd like to kno whow to do a & b just in case I decide to do one or the other at the end, I'd like to know how to do both for future reference ?
I need to call a stored procedure to insert data into a table in SQL Server from SSIS data flow task. I am currently trying to use OLe Db Destination, but I am not sure how to map inputs to OLE DB Destination to my stored procedure insert. Thanks
I have a job/step that call a Fileprocessor.dtsx package with 4 different config files. I need to make a enhancement to the job to call the same package using a new (parent) package with multiple iterations based on some business condition.
I am going to modify the job/step to call ParentFileprocessor now with same all 4 config files which in-turn have a call to run Fileprocessor.dtsx; my problem is, how do I pass all 4 config files for child call? Using which task?
I m not allowed to modify Fileproessor.dtsx (to be child pkg) SQL2012, MSDB package deployment model.
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
