We run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail? Either way is there a way I can detect that the threshold was exceeded?
View 3 RepliesIs it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies View RelatedI need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedIn my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation > Oledb Command
> Rowcount_Transformation1 > Oledb Command1
> Rowcount_Transformation2 > Oledb Command2
> Rowcount_Transformation3 > Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
I have created a SSIS Package which does the incremental update using CDC Controls.
The design is similar to any standard CDC incremental package.
It has a CDC Start which sets the Mark Processing Range, a data flow and a Mark Processed Range.
The issue that i'm facing is that the CDC Source control time-out but i can still see rows moving from CDC Source to Splitter and target table. After the rows are transferred, the Data Flow task Fails which leads to package failure.
This results in Mark Processed Range not being executed.
So my query is
1. Why is CDC Source being time-out?
2. What can i do so that all three i.e Mark Processing Range, data flow and Mark Processed Range execute successfully or nothing does.
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following: . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
I'm using following command to populate my OLE DB Source. I have two of those in each Data Flow in my package. One of the OLE DB Sources points to my source database the other to the destination. In order to limit the number of rows I use the WHERE clause below. The [EnergyMiserFSRLive] being the the name of the source database. The Connection manager points to the destination database.
I would like an elegant way to replace [EnergyMiserFSRLive] with a parameter which I can reuse in each of my many data flows rather than use this hard coded value [EnergyMiserFSRLive].In particular I'm after the syntax of the below query that uses the parameter for [EnergyMiserFSRLive].
SELECT [SitesId]
,[SiteName]
,[FilePrefix]
,[City]
,[StateProv]
,[Country]
FROM [Sites]
WHERE SitesId >= (SELECT MIN(SitesId) FROM [DBNameFSRLive].[dbo].[Sites])
ORDER BY [SitesId]
I ran across this issue the other day and thought it might be helpful to others who have or will experience the issue.
When you install Microsoft SQL Server 2005 Service Pack 1 (SP1) on a computer that is already running SQL Server Integration Services (SSIS), the SSIS service will not start, and the following error message is logged in the system event log:
The service did not respond to the start or control request in a timely fashion
http://support.microsoft.com/?kbid=918644
Build 2153 Post SP1 Hotfixes need to be installed.
http://support.microsoft.com/kb/918222/
I have a got a package with source as sql table which has got 50 columns. We are using only 10 columns out of this. Recently one column name has changed and thus throws error invalid mapping. When I open the source to do the changes noticed that all the colums are prselected now and also the datatypes got changed to default ( I had changed the datatypes as per my requirement while i developed). So now I had to select required columns from source and redo the datatype changes in advanced editor.Is there any option which doesnt disturb this settings and we just need to correct the mapping alone.
View 4 Replies View RelatedI'm using SQL Srv '12. Have ADW'12 and ADWDW'12 DBs installed.I created a new SSIS project. Two project level OLEDB con mngers (One for each OLEDB DB).Dragged and dropped a new DFT.Inside the DFT, I'm using Source Assistant to connect to the ADW'12 OLEDB source.
View 8 Replies View RelatedOS : Win7, 64bit
Software : Oracle Clients 32bit and 64 bit (11g), SSIS 2012
I have installed both 32bit and 64bit oracle ODACs during the clients installations, and then i have installed the ssis 2012.
When i open .udl file i can see the 'Oracle Provider for OLE DB' provider and connect to the oracle db.
When i try to open new Ole DB connection in the ssis the 'Oracle Provider for OLE DB' is not listed under the 'Native Ole DB' providers.
i tried to reinstall both ODACs of 32 and 64 bit of the oracle but still the provider is not listed under the ssis providers.why ?
I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.
when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.
I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,
CREATE TABLE ##SiteTemp
(
LEVEL2 VARCHAR(20),
LEVEL3 VARCHAR(25)
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
I am getting the following error when trying to EDIT a OLEDB Connection Manager. I am using VS2010. Im not coming up with any answers to this problem. I just reinstalled SQL SERVER CLIENT TOOLS 2012 That includes the SQL DATA TOOLS/VS 2010 But I still receive this error.
Error:Unable to find the requested .Net Framework Data Provider. It may not be installed. (System.Data)
Getting following error while trying to connect to ORACEL database using OLEDB manager.
Error at RADAR [Connection manager "RADAR_Updated"]: SSIS Error Code DTS_E_OLEDB_NOPROVIDER_ERROR. The requested OLE DB provider OraOLEDB.Oracle.1 is not registered. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
[code]....
I have an SSIS job that is pumping to a SQL Server Destination, hundreds of gigabytes of raw text files. Today I received this strange error ? Also, how would I make the data tasks more stable and robust so that this doesn't cause package failure (retries, or something?)
[SQL Server Destination [4076]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
I am trying to dynamically change my initial catalog in a SSIS project. Each day I get a snapshot of data from the production server. I am performing ETL on that database and loading it into my warehouse. I am trying to put something together so that each day I get the latest snapshot and if its newer then my most recent one I pass that new catalog into the connection manager. I can already run the sql script to compare the two catalogs but I can't populate the connection manager.
View 3 Replies View RelatedI have a Data Flow task Within a for loop Container.. the for loop container receives the result of sql query, iterates over the result set and passes each variable to the OLE DB Source.. Now based on the parameter passed I need to execute a query.. say for example if the parameter passed is P1 execute SQL S1 , P2 then S2 & so on.. How do I use the Parameter passed in SQL Query?
View 12 Replies View RelatedHi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
My requirement is to sling a rowset from one place in SQL server into a table in another place in the most performant way. I want this to be parameterizable - I want to provide just a connection string and some SQL for the source and a connection string and a table name for the destination. The package should do the rest.
The solution I chose was an 2014 SSIS package with source and destination as ADO.NET connections configured from project variables. The package has a script task to bulk copy the data. For performance I disable the non-clustered indexes first.
But this performance precaution causes the bulk copy to timeout after delivering the correct rowcount to the destination table. What I can do to avoid this error?
Here's my script code:
//get hold of the source and a data reader from it
SqlConnection sqlconnSource = new SqlConnection();
sqlconnSource = (SqlConnection)(Dts.Connections["source"].AcquireConnection(Dts.Transaction) as SqlConnection);
SqlCommand sourcesqlCommand = new SqlCommand(SourceSQL, sqlconnSource);
sourcesqlCommand.CommandTimeout = 1500;
[Code] ....
This takes 128 seconds to put 13 million thin rows into my empty destination table and then throws an exception with this message:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
When running the etl I'm getting the error: <SSIS Task>: Shared Memory Provider: Timeout error [258] ; followed by the message "Communication link failure".
What is special about this message that it happens on a SQL Execute task (random task) and the Timeout is after 2 minutes.
When executing the packages separatly it is working fine. The SQL Tasks that are failing are also quit heavy, but reasonable and takes between >2min and 10 - 15 min. Statements are stored procedures that puts an index on 3 mil. records or update statements,...
I had a look to all my (SSIS-etl) timeouts and they have the default value 0, the "remote query timeout" of the server is set to 10 minutes. According to me, these are the only one that exists?
There are 2instances on the server each instance has 24GB allocated, the server has 64 in total. Also when the etl runs (that results in an error) no other etl is running on the 2 instances. I'm working with the oledb sql server native client11.0 provider : SQLNCLI11.1.
Hi All,
Please let me know whether we can use Teradata as Source in SSIS (Target is SQL Server 2005). ie. Do we have oledb driver for NCR Teradata to connect to it. Our SSIS will be hosted in 64 bit SQL, but for development we use 32 bit.
Any inputs is really appreciated.
Regards, kart
I can preview the SQL command in the OLE DB Source Editor and bring back all columns and results just fine but when I click on the Columns I get
TITLE: Microsoft Visual Studio
------------------------------
The component reported the following warnings:
Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command.
The columns are there in the preview - why can't SSIS get the column information?
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View RelatedHi everyone,
I've got a problem to retrieve data from a Xml Source.
Basically, I call a method from a Web Service which gives me a Xml file.
The problem is that the XML structure is not really good. But we can't touch it.
Here is the Xml File :
Code Snippet
<?xml version="1.0" encoding="utf-16"?>
<ArrayOfWSTargetVO xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<WSTargetVO>
<ProjectId>
<Value>131</Value>
</ProjectId>
<Id>
<Value>Toto</Value>
</Id>
<Name>
<Value>bateau</Value>
</Name>
</WSTargetVO>
<WSTargetVO>
<ProjectId>
<Value>131</Value>
</ProjectId>
<Id>
<Value>Tata</Value>
</Id>
<Name>
<Value>F35</Value>
</Name>
</WSTargetVO>
...
</ArrayOfWSTargetVO>
As you can see, for each WSTargetVO, we have a projectid, an id and a name. But the value is not directly put into these nodes but in a new one : <value>
That causes my problem because here is the xsd file generated by visual studio :
Code Snippet
<?xml version="1.0"?>
<xsd:schema xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="unqualified" elementFormDefault="qualified">
<xs:element name="ArrayOfWSTargetVO">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" name="WSTargetVO">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="ProjectId">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Value" type="xs:unsignedByte" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element minOccurs="0" name="Id">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Value" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element minOccurs="0" name="Name">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" name="Value" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xsd:schema>
And when I try to use the outpul results from the Xml file, I can't see how I can get a datatable with three columns corresponding to projectid, id and name.
Integration Services only asks me to choose between WSTargetVO or ProjectID or Id or Name and give me the <value> value.
I don't know if it is possible to modifiy the contents of the XmlFile or something else using XPath.
Of course, if I try to modifiy the XSD file and delete the value node to have a simple structure, I see my three columns but i can't get any data.
I'm aware that the XML file is pretty bad but it is impossible for me to change it.
If somebody has an idea, I would be happy to hear it :-)
(I'm a beginner in Integration Services)
Thank you,
Radik
I'm having trouble using a Progress database as a source. I have an OpenLink driver installed and a System DSN set up. I can successfully test the connection. I added this DSN to the connection manager and added it to a DataReader Source. I then added the SQLCommand property. I was able to map columns and such, so I believe the SQLCommand was successfully parsed. However, when I try to save the DataReader Source, I get an error:
Error at Data Flow Task [DataReader Source [2266]]: System.Data.Odbc.OdbcException: ERROR [HY010] [OpenLink][ODBC][Driver]Function sequence error at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcDataReader.NextResult() at System.Data.Odbc.OdbcDataReader.Close() at Microsoft.SqlServer.Dts.Pipleline.DataReaderSourceAdapter.ReinitializeMetaData() at Microsoft.SqlServer.Dts.Pipleline.ManagedComponentHost.HostReinitialieMetaData(IDTSManagedComponentWrapper90 wrapper)
I have a Data Flow Task. I have one "OLE DB Source" which gets my data from a SQL Server Database. I have a second "OLE DB Source" which uses DATEADD to derive a date qualifier that I would like to use as a date qualifier in my subsequent Excel spreadsheet...opting to use SQL Server and DATEADD rather than messing around with VB syntax to get the previous week date qualifier.I am trying to connect the flow from one OLE DB Source to the next OLE DB Source and get the error..Component OLE DB Source has no inputs, or all of its inputs are already connected to other outputs. You may be able to edit the component to add new inputs to it.Can't I connect two completely different and independent SQL Server queries using "OLE DB Source" within my Data Flow?
Is there any way to store my derived date from my second "OLE DB Source" to a variable so that I cana then use that as my date qualifier within my Excel destination?
I have two servers (TESTSERVER, PRODSERVER). On the TESTSERVER i have a package that i'm using for data load from a source database on a SOURCESERVER. Everything works great until this point. Now from the PRODSERVER in the SSIS package i'm trying to create a connection in the connection manager to the SOURCESERVER and i'm getting the following error
Test connection failed because of an error in initializing provider. Login timeout expired.A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
Hi All,
This is first time I am trying to ste timeout on SSIS package ,Can some one let me know which is the best way to set timeout for connection?
And what is the difference between General TimeOut and Command TimeOut?
Thanks,
Shilpa
How to execute ssis package from command prompt and also pass configuration file to it and set logging to ssis log provider for sql server. Writing all those options with cmd.
View 3 Replies View Related