Integration Services Won't Install
Jan 12, 2007
I am installing Visual Studio 2005 Professional on Windows XP.
I have finished installing Visual Studio 2005 Professional along with Service Pack 1. Now I am installing the Developer version of SQL 2005 that comes with Visual Studio 2005 Professional .
During the installation of SQL Server 2005, I got the following error during
the integration services installation portion:
Failed to install and configure assemblies: c:program filesmicrosoft sql
server90dts asksmicrosoft.sqlserver.msmqtask.d ll in the COM+ catalog.
Error -2146233087
Error message: unknown error 0x80131501
Error description: You must have administrative credentials to perform this
task.
I'm logged into Windows as Administrator.
This machine did previously have VS 2005 Standard and SQL 2005 Standard loaded. The software was RTM software as provided by Microsoft at their launch event. I did uninstall both products before attempting the upgrade.
Any help would be much appreciated.
View 3 Replies
ADVERTISEMENT
Oct 20, 2015
I have two local boxes. On one I have ssis 2008 r2, the other a new install of 2014 enterprise. I have an excel file that both machines can open (ext .xlsx) with 64 bit excel 2010 on the same share location.On my 2008 r2 installation, when I create a dft then go thru adding an excel source and let ssis create a conn mgr, ssis can see the one and only tab in the source's "name of excel sheet" drop down.On my 2014 installation, I see a message "no tables or views could be loaded" in the drop down after going thru the same steps. I don't know if it matters in 2014 but I set 32 bit mode on both.Am I missing some sort of addin on my ssis 2014 install? I cant say for certain what version of excel created this file.
View 4 Replies
View Related
Jul 14, 2007
Hello - We have been unable to successfully install Integration Services with an instance of SQL 2005 running on a Windows Small Business Server 2003. Installation proceeds with no errors, but when you attempt to connect to the Integrations Services and browse to where it apparently exists, the SQL Server Managment Studio returns the following error:
TITLE: Connect to Server
------------------------------
Cannot connect to ABDI04.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Connect to SSIS Service on machine "ABDI04" failed:
The specified service does not exist as an installed service.
.
------------------------------
Connect to SSIS Service on machine "ABDI04" failed:
The specified service does not exist as an installed service.
.
------------------------------
BUTTONS:
OK
------------------------------
We have tried uninstalling the Integration Services, then reinstalling it and again applying SP2 with the same results.
Thank you.
View 17 Replies
View Related
Feb 6, 2007
I am currently running Windows XP Professional Service Pack2. It already has MSDE & SQL Server 2000 installed (although I just uninstalled MSDE in the vain hope that it might present the installer with a more straightforward upgrade).
I have tried installing with the default instance & a new instance (I don't really care - I just need to install the darn thing). I just want the basic database & Books On-line, nothing fancy.
Here is the Summary log, for what it's worth:
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Tue Feb 06 16:45:14 2007
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLSupport_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_SQLNCLI_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_OWC11_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BOL_1.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_BackwardsCompat_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : MSXML 6.0 Parser (KB927977)
Product Version : 6.00.3890.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0011_ANTHONYY1_MSXML6_2.log
--------------------------------------------------------------------------------
Machine : ANTHONYY1
Product : SQLXML4
Error : Setup is preparing to continue with the installation.
--------------------------------------------------------------------------------
Here is the SQLSetup0011_ANTHONYY1_Core(Local).log
Microsoft SQL Server 2005 Setup beginning at Tue Feb 06 16:45:14 2007
Process ID : 2560
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/1/6 16:45:14
Complete: LoadResourcesAction at: 2007/1/6 16:45:14, returned true
Running: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/1/6 16:45:14, returned true
Running: ValidateWinNTAction at: 2007/1/6 16:45:14
Complete: ValidateWinNTAction at: 2007/1/6 16:45:14, returned true
Running: ValidateMinOSAction at: 2007/1/6 16:45:14
Complete: ValidateMinOSAction at: 2007/1/6 16:45:14, returned true
Running: PerformSCCAction at: 2007/1/6 16:45:14
Complete: PerformSCCAction at: 2007/1/6 16:45:14, returned true
Running: ActivateLoggingAction at: 2007/1/6 16:45:14
Complete: ActivateLoggingAction at: 2007/1/6 16:45:14, returned true
Running: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14
Complete: DetectPatchedBootstrapAction at: 2007/1/6 16:45:14, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2560" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2007/1/6 16:45:14
Complete: PerformDotNetCheck2 at: 2007/1/6 16:45:14, returned true
Running: InvokeSqlSetupDllAction at: 2007/1/6 16:45:14
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [ANTHONYY1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
No Instance Name provided on the command line
If possible, determine action
Machine = ANTHONYY1, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = ANTHONYY1, Article = XMLDomDocument, Result = 0 (0x0)
Machine = ANTHONYY1, Article = Processor, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PhysicalMemory, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSServicePack, Result = 0 (0x0)
Machine = ANTHONYY1, Article = OSType, Result = 0 (0x0)
Machine = ANTHONYY1, Article = iisDep, Result = 0 (0x0)
Machine = ANTHONYY1, Article = AdminShare, Result = 0 (0x0)
Machine = ANTHONYY1, Article = PendingReboot, Result = 70011 (0x1117b)
Machine = ANTHONYY1, Article = PerfMon, Result = 0 (0x0)
Machine = ANTHONYY1, Article = IEVersion, Result = 0 (0x0)
Machine = ANTHONYY1, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = ANTHONYY1, Article = COMPlus, Result = 0 (0x0)
Machine = ANTHONYY1, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = ANTHONYY1, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: ANTHONYY1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
<Func Name='DisplaySCCWizard'>
CSetupBootstrapWizard returned 1
<EndFunc Name='DisplaySCCWizard' Return='0' GetLastError='183'>
Failed to find help file for LCID :2057
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/1/6 16:49:35, returned true
Running: SetPackageInstallStateAction at: 2007/1/6 16:49:35
Complete: SetPackageInstallStateAction at: 2007/1/6 16:49:36, returned true
Running: DeterminePackageTransformsAction at: 2007/1/6 16:49:36
Complete: DeterminePackageTransformsAction at: 2007/1/6 16:49:47, returned true
Running: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47
Complete: ValidateSetupPropertiesAction at: 2007/1/6 16:49:47, returned true
Running: OpenPipeAction at: 2007/1/6 16:49:47
Complete: OpenPipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/1/6 16:49:47
Complete: CreatePipeAction at: 2007/1/6 16:49:47, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2007/1/6 16:49:47
Complete: PopulateMutatorDbAction at: 2007/1/6 16:49:47, returned true
Running: GenerateRequestsAction at: 2007/1/6 16:49:47
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = 3
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = 3
SDK = 3
SQLXML = 3
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/1/6 16:49:48, returned true
Running: CreateProgressWindowAction at: 2007/1/6 16:49:48
Complete: CreateProgressWindowAction at: 2007/1/6 16:49:48, returned true
Running: ScheduleActionAction at: 2007/1/6 16:49:48
Complete: ScheduleActionAction at: 2007/1/6 16:49:48, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
No install request found for package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "dts", install will be skipped as a result.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "dts", install will be skipped as a result.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
No install request found for package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
No install request found for package: "sqlncli", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "ns", install will be skipped as a result.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "ns", install will be skipped as a result.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2007/1/6 16:49:48
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallSqlAction.11 at: 2007/1/6 16:49:51, returned true
Running: InstallSqlAction.12 at: 2007/1/6 16:49:51
Installing: sqlncli on target: ANTHONYY1
Complete: InstallSqlAction.12 at: 2007/1/6 16:49:55, returned true
Running: InstallSqlAction.18 at: 2007/1/6 16:49:55
Installing: owc11 on target: ANTHONYY1
Complete: InstallSqlAction.18 at: 2007/1/6 16:49:56, returned true
Running: InstallSqlAction.21 at: 2007/1/6 16:49:56
Installing: sqlwriter on target: ANTHONYY1
Complete: InstallSqlAction.21 at: 2007/1/6 16:49:58, returned true
Running: InstallSqlAction.22 at: 2007/1/6 16:49:58
Installing: bcRedist on target: ANTHONYY1
Complete: InstallSqlAction.22 at: 2007/1/6 16:50:0, returned true
Running: InstallSqlAction.9 at: 2007/1/6 16:50:0
Installing: msxml6 on target: ANTHONYY1
Complete: InstallSqlAction.9 at: 2007/1/6 16:50:2, returned true
Running: InstallToolsAction.11 at: 2007/1/6 16:50:2
Installing: sqlsupport on target: ANTHONYY1
Complete: InstallToolsAction.11 at: 2007/1/6 16:50:5, returned true
Running: InstallToolsAction.12 at: 2007/1/6 16:50:5
Installing: sqlncli on target: ANTHONYY1
Complete: InstallToolsAction.12 at: 2007/1/6 16:50:8, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2007/1/6 16:50:8
Installing: owc11 on target: ANTHONYY1
Complete: InstallToolsAction.18 at: 2007/1/6 16:50:10, returned true
Running: InstallToolsAction.20 at: 2007/1/6 16:50:10
Installing: BOL on target: ANTHONYY1
Complete: InstallToolsAction.20 at: 2007/1/6 16:52:2, returned true
Running: InstallToolsAction.22 at: 2007/1/6 16:52:2
Installing: bcRedist on target: ANTHONYY1
Complete: InstallToolsAction.22 at: 2007/1/6 16:52:4, returned true
Running: InstallToolsAction.9 at: 2007/1/6 16:52:4
Installing: msxml6 on target: ANTHONYY1
Complete: InstallToolsAction.9 at: 2007/1/6 16:52:6, returned true
Skipped: InstallNSAction.10
Skipped: Action "InstallNSAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "ns", install will be skipped as a result.
Running: InstallSqlAction at: 2007/1/6 16:52:7
Installing: sql on target: ANTHONYY1
Error: MsiOpenDatabase failed with 110
Failed to install package
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Error: MsiOpenDatabase failed with 110 for MSI D:ServersSetupSqlRun_SQL.msi
Setting package return code to: 1620
Complete: InstallSqlAction at: 2007/1/6 16:52:27, returned false
Error: Action "InstallSqlAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallToolsAction.10 at: 2007/1/6 16:52:27
Installing: sqlxml4 on target: ANTHONYY1
Error Code: 0x8007006e (110)
Windows Error Text: The system cannot open the device or file specified.
Source File Name: sqlchainingminorbuildactionbehavior.cpp
Compiler Timestamp: Mon Jun 13 14:30:04 2005
Function Name: sqls::MinorBuildActionBehavior::modifyRequest
Source Line Number: 65
---- Context -----------------------------------------------
sqls::InstallPackageAction::perform
Complete: InstallToolsAction.10 at: 2007/1/6 16:55:59, returned false
Error: Action "InstallToolsAction.10" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Action "InstallToolsAction" will return false due to the following preconditions:
Condition "Action: InstallToolsAction.10 has finished and failed." returned true.
Installation of package: "tools" failed due to a precondition.
Step "InstallToolsAction" was not able to run.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
Action: "RepairForBackwardsCompatRedistAction" will be skipped due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Error: Action "UninstallForMSDE2000Action" failed during execution. Error information reported during run:
Action: "UninstallForMSDE2000Action" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchMSDE2000" failed due to a precondition.
Error: Action "UninstallForSQLAction" failed during execution. Error information reported during run:
Action: "UninstallForSQLAction" will be marked as failed due to the following condition:
Condition "sql was successfully upgraded." returned false. Condition context:
sql failed to upgrade and so the uninstall of the upgraded product will not occur.
Installation of package: "patchLibertySql" failed due to a precondition.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2007/1/6 16:55:59
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1620
Error Code: 0x80070654 (1620)
Windows Error Text: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::postCommit
sqls::HighlyAvailablePackage::preInstall
led due to cancel code received from cancel source: 29539
...and here is the SQLSetup0011_ANTHONYY1_SQL.log:
=== Verbose logging started: 06/02/2007 16:52:14 Build type: SHIP UNICODE 3.01.4000.2435 Calling process: C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe ===
MSI (c) (00:54) [16:52:14:284]: Resetting cached policy values
MSI (c) (00:54) [16:52:14:284]: Machine policy value 'Debug' is 0
MSI (c) (00:54) [16:52:14:284]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (c) (00:54) [16:52:14:284]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (00:54) [16:52:14:284]: Grabbed execution mutex.
MSI (c) (00:54) [16:52:14:299]: Cloaking enabled.
MSI (c) (00:54) [16:52:14:299]: Attempting to enable all disabled priveleges before calling Install on Server
MSI (c) (00:54) [16:52:14:299]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (A4:98) [16:52:14:299]: Grabbed execution mutex.
MSI (s) (A4:00) [16:52:14:299]: Resetting cached policy values
MSI (s) (A4:00) [16:52:14:299]: Machine policy value 'Debug' is 0
MSI (s) (A4:00) [16:52:14:299]: ******* RunEngine:
******* Product: D:ServersSetupSqlRun_SQL.msi
******* Action:
******* CommandLine: **********
MSI (s) (A4:00) [16:52:21:080]: Note: 1: 2203 2: D:ServersSetupSqlRun_SQL.msi 3: -2147024873
MSI (s) (A4:00) [16:52:21:080]: MainEngineThread is returning 1620
MSI (c) (00:54) [16:52:21:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (00:54) [16:52:21:080]: MainEngineThread is returning 1620
=== Verbose logging stopped: 06/02/2007 16:52:21 ===
I suppose an error dialog (or log message) that actually told you what is wrong and then what to do is too much to ask for. (Or an installer than just copied all the files into place). :(
View 4 Replies
View Related
Aug 15, 2007
The error I got is:
Hotfix.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
EventType : sqlsesetup P1 : sysdbupg.sql P2 : 0x7361
P3 : odbcstatement__execute_batch@sysdbupg.sql@3 P4 : 0x7361
P5 : lib_odbc_statement.h@91 P6 : unknown P7 : sql9 P8 : hotfix@
P9 : x86 P10 : 3042
Log Location: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]Cannot find the object 'dm_exec_query_resource_semaphores', because it does not exist or you do not have permission.. To continue, correct the problem, and then run SQL Server Setup again.
I tried to search internet, however, I couldn't get solution.
My SQL server 2005 is standard version, OS Windows server 2003 sp2, I am using Administrator account to install it.
Thanks a lot,
Rex
View 9 Replies
View Related
Sep 11, 2007
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
View 4 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Oct 11, 2007
Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:
"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"
The cube name is not specific, it will fail and any of my cubes could be in the error log
If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.
I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.
When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.
I've done the following with no effect.
" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server
Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file
SQL Server 2005 + Service Pack 2
Can anyone help?
Andy
View 2 Replies
View Related
Aug 14, 2006
I am working as a consultant on a project to upgrade an Access 2000 db to SQL Server. My client has bought off on everything, and they're ordering a new dedicated box this week. They're getting a rackmount machine running Windows Server and SQL Server 2005.
My expectation was that their IT people would take care of administrative & security issues such as setting the machine up, installing & starting SQL Server and configuring the proper accounts. Suprisingly though, they're going to mount the machine in the rack, turn it on and let me do all of this.
I'm new at SQL Server, but I'm comfortable working with database objects (tables, views, etc...) I'm not so comfortable with the networking or administrative side of things. It took me a couple of hours to be able to connect to the DB on my desktop machine over my home network. You can see why I'm intimidated at the prospect of getting things integrated & running on a pretty large corporate network.
Maybe I'm overblowing this, but this just gives me the willies.
Are my fears justified? Am I going to be ok if I just follow the standard procedures for allowing TCP/IP connections to the server? Am I going to have to deal with firewalls? (I think I know the answer - "it depends on their network.." - that's what I'm scared of.. I don't know anything about their network, and I don't know enough about networking in general to figure things out..)
Are there any other best practices that I should follow for a fresh install?
View 2 Replies
View Related
Apr 18, 2007
Does anybody know of a notification services using SSIS? Is it SendMail or otherwise? Is there a step-by-step practice on how to create one?
View 19 Replies
View Related
May 24, 2007
Is there a way to give customers access to SSIS? They need to be able to create their own SSIS packages. Of course we have more then one customer so it would be nice to have modular security in place where they don't get to see customers abc and customer xyz packages. Only their own.
thanks!
View 6 Replies
View Related
May 8, 2008
Hi All,
I have created an integration services project (attached is a screenshot) that workes against the flat file (.DAT extension) and it does some manipluation in the data and then load it into the table. Everything works fine.
Now I want to get the name of my flat file source fille (which is a .DAT file) and then insert it in the table.
I am running th integration services against different .DAT files (only one file at one time) which are located on different locations.....so what I want is that, whenever I run the package it do the usuall processing and then while loading the data in to the destination table, it also load the name of the file into the destination table (lets called a field "FileName" of nvarchar type in the table "Comphistory")
How can I achieve this?
I am looking for a quick and easy help.
Thanks,
Zee
View 4 Replies
View Related
Jul 25, 2007
Problem
When you have a SSIS package that contains a connection from a data source, this connection is not updated when the data source changes based on a configuration change.
Situation :
A SSIS solution contains 3 configurations : Development, Test, Production. You can create those configurations in configuration manager of the solution.
The SSIS project contains one Data source. It doesn't really matter what type but I take SQL Server. The database server in development is SQL_DEV, in test is SQL_TEST and in production is SQL_PROD. Initially they are for all configurations the same. You can specify those values by changing the active configuration and then editing the Data source.
In the SSIS package (DTSX), you can create a connection manager based on a Data source.
If you change the Data source, the connection manager is also changed. If you change the Data source by changing the active configuration, the connection manager is not being updated.
If you think this isn't a big issue think big. We have 4 configuration, 10 shared Data sources and 25 DTSX packages. That would give a maximum of 1000 settings (4 x 10 x 25). Using this method it can be reduced to 40 (4 x 10). Of course this is a theoretical but it is very common to have the destination data source re-used on all packages, which still would be 100 settings (4 x 25)
Steps to reproduce
- create a new SSIS project
- In the solution explorer, create a new Data source named TestSource.
- In the connection managers window of Package.dtsx, create a new connection from a Data source.
- Make some changes in to TestSource.ds under the Data Sources. For example change the server or the database.
- Verify that those changes are also in the package.
- in the solution explorer, right click the solution and select configuration manager
- under active solution configuration, create a new configuration named test.
- Set the copy settings from : development
- Verify that Create new project configuration is checked.
- click OK and close.
- Notice that the active configuration is now Test
- Make some changes the Testsource.ds like a different server.
- Verify that those changes are also in the package.
- Make the development configuration as active.
- Notice that the Testsource.ds contains now the original settings.
- You will notice that the connection manager still contains the "test" settings and not the development settings.
- If you create a deployment utility it will still contains the wrong values.
with regards,
Constantijn Enders
View 1 Replies
View Related
Jun 16, 2006
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
View 3 Replies
View Related
Apr 25, 2006
Hi,
is Integration Services included in SQL Server Express?
In what version/module?
Thanks
just Do It
View 1 Replies
View Related
Jun 16, 2006
Hi all,
Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.
I am trying to get the Prescription table from Access to SQL SERVER 2005 database
Ronald
SSIS package "Prescription.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
View 1 Replies
View Related
Jun 20, 2006
I'm trying to use the new integration services and have found all kinds of help for it, but where is it? I can't find it. Is it in the SQL Server Management Studio?
View 1 Replies
View Related
Feb 25, 2005
Where can I find the Reporting Service setup ?
Is it linked to a particular version of SQLServer 2000 (Standard...)
On the CD ?
View 2 Replies
View Related
Apr 18, 2008
I have an installation of 2005 Express and I am attempting to install advanced services. I have tried uninstalling all .net service packs as well as installing with the skuupgrade=1 tag, but I still receive a message stating that the currently installed version is more recent that the version I am attempting to install. What might I be missing here?
View 1 Replies
View Related
Jul 20, 2005
Hi,I'm running Windows XP and SQL Server Developer Edition (sp3) and I'm tryingto install the MS SQL Server Reporting Services that is in the MSDN of April2004. I also have Visual studio.net installed.So when I run the CD all goes well until you specify the database for thereporting server and then I get the following error:"This edition of the Report Server Database is not supported on the editionof SQL Server 2000 you have chosen. Please choose on that matches therequirements."MS Requirements are SQL 2000 Standard, SQL 2000 Enterprise, and SQL 2000Developer edition.What does this mean, any comments or feedback will be greately appreciated.- Sergio
View 4 Replies
View Related
Mar 14, 2008
How can I install SQL2005 Reporting Services to a local pc? I have a WindowsXP workstation and want to be able to report from SQL databases, and am having a very hard time understanding what is necessary to get to the Reporting Services. I loaded the SQL2005 cd, but when it got to the Components to Install screen, Reporting Services was grayed out and not able to be selected. The SQL databases are maintained on a separate server apart from my workstation.
MS Access 2000 is loaded on the computer and I know I can make pass-through queries for reporting, but I really would like to move to SQL2005. I just do not know where to go next.
Thanks for any help.
Dan
View 1 Replies
View Related
Apr 12, 2007
I have been trying now for five days to get the Add-In for Reporting Services and Sharepoint to install. I've been reading the previous posts and they don't address the issue. Here's the scenario:
- I am logged in as a local admin
- I have Windows Server 2003, Service Pack 1 installed
- The box in question is up to date with patches, etc.
- I have SQL 2K5 Service Pack 2 installed
- There is NO RS_SP log file generated anywhere
- There are no ReportServer.<culture>.resx files anywhere in the Sharepoint web site
I am at an absolute loss as to what is going on. Shouldn't this be a lot easier than this??
Any insight would be appreciated!
Thank You
View 2 Replies
View Related
Oct 16, 2007
I may be a fool, I installed Sql 2005 on my dev box, and I forgot to check reporting services. Anyway how can I install reporting services once I have installed Sql Server? I tried re-runing setup but I did not see a reporting services option as an option. I am sure I am just missing something simple.
Thanks
Justin
View 1 Replies
View Related
Nov 2, 2007
Hi All,
We are having a bit of a disagreement of where to install reporting services within work, and i would like some input.
Basically there are two views.
1. We leave reporting Services running on one of our current servers, and reference it through the report viewer, using http. I think the firewall is setup to do this internally. The websites will then use the control to access the reports.
2. We have reporting services on our external DMZ where all our websites reside.
I have argued for number 1, becuase mainly of memory usage and problems it can cause to servers performance wise.
Anyone else got any ideas?
Cheers, Nick
View 5 Replies
View Related
Jul 31, 2007
I am trying to configure Reporting Services on a server which is not the database server. I keepo getting a message telling me I am not authorized to access the Report Manager or Report Server virtual directories... no matter what user and pass I enter.
How do I get this to work? Remember Reporting Services is installed on a server separate from the databsae server.
Thanks
View 3 Replies
View Related
Jul 25, 2007
Hi,
I want to insert datas from a txt-file into a sql-table.
Therefor i would use a xml-file for the structure!
How can i refer this xml-file to a measurement insertion task?
Tanks for your help and sorry for my bad english :rolleyes:
View 1 Replies
View Related
Jul 23, 2005
I am trying to know how to read many XML files within one data flowtask. I have many many files that I would like to apply to with thesame data flow so I need to know how to read them in and what taskshould I use under SQL 2005 DTS/Integration services.Thanks for your help!JON
View 1 Replies
View Related
Jan 14, 2008
Good morning,
I've to do a mining project and I intend to use the SSIS.
I've done a clustering plugin last year on analysis services and I also want to use it.
Let me try to explain the architecture of the process:
1) Receive data (read data from the database - these data are texts, actually)
2) Pre-process the data (transform the texts in a sparse matrix) using a new plugin
3) Call my clustering plugin and assign it to read the table created on the previous step
4) Call my KNN plugin to classify other pre-processed texts using the clusters found on the previous step as classes.
5) Show results.
Alright... It all running as a workflow on integration services
Here are my doubts:
A) How to view and use my plugin made for Analysis Services on Integration Services ? (is it possible or will I have to create another plugins from zero just to run on Integration Services ?)
B) Assuming the previous step is possible, how to modify my plugins to define inputs and outputs to do the correct communications between each plugin ? I think this is the most important question. Is it simple to do ? Is there any documented examples ?
Thanks a lot for your attention once more,
-Renan Souza
View 1 Replies
View Related
Apr 24, 2007
is it possible to use integration services to extract data from essbase?
View 3 Replies
View Related
Apr 5, 2007
Don't know what's the problem while installing SP 1 it just kills the Integration Services. Did any one had this issue?
Thank you - Ashok
View 6 Replies
View Related
Nov 16, 2006
When i try to connect to SQL 2005 integration services from object explorer i get connected (in the sense it shows in object explorer running packages stored packages ..)but when i try to exand any of these objects i get the following error
--------------------------------------------------------------------------------------------------
Failed to retrieve data for this request(Microsoft.sqlserver.smoEnum)
Additional information
The sql server specified in SSIS service configuration is not present or not available.This might occur when there is no default instance of Sql server on the computer. For more information see "config integeration services" in server 2005 books online.
Login time out expired
An error has occured while establishing a connection to the server.When connecting to the Sql server 2005, the failure may be caused by the fact that under default settings Sqlserver does not allow remote connections.
Names Pipes Provider: could not open a connection to Sql Server[2].(MsDtsSrvr)
----------------------------------------------------------------------------------------------------------
i have chkd remote connection settings and other settings but cant find a way out.
kindly provide some help
Thanks in advance
View 4 Replies
View Related
Sep 26, 2007
Hi
We have developed a datawarehouse using DTS in 2000. Now we have started using 2005 and as it supports DTS so there no issued for our datawarehouse to run.
But every six months there are new requirements and we achange and add to the existing DTS, but now DTS development is not supported in 2005, can we use itegration services for the same and embedd it with the existing DTS or do I need to redevelop the datawarehouse using SSIS.
View 1 Replies
View Related
