I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 RepliesI am having difficulties loading data from a flat file to a SQL Database. I am able to load some data but the rest gets kicked out for the following reasons:
1 – The field is varchar 50 and I would like to convert it to a date field
2 – The field contain periods (.) (Only 1 period in each row)
3 – The field contain blanks (NULLS)
How do I create a derived column that will bypass blanks (Nulls) and remove periods (.) in each row then convert column to a date field in SSIS? Looking for steps to create a derived date column using SSIS (derived task); convert it to a date column (09-19-2015); use functions to redirect the nulls and possibly remove the period (.)?
[b][u]Sample Data[/u][/b]
Column 3 (Varchar 50) Need to convert to date; remove periods, and bypass nulls(blanks)
Blank
.
Blank
.
Blank
Blank
.
01-19-2015
01-19-2015
Blank
.
Blanlk
.
Blank
01-19-2015
.
Blank
.
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
We have created SSIS package to load a text file into a table. Source system shares 10 text files and recently they stopped generating data for one of the text file (comping empty), after few months they will start generating the data for the empty file batch processing.
The Issue here is Data Flow task is getting failed while loading empty text file into table. How to handle this empty file load issue in SSIS package.
I have requirement like to develop dynamic package for inserting data from flat file to table.
Find below points for more clarification :--
1) if I changed the flat file values and name in source variable AND the table name should be also changed based on variable value .
2) it should dynamically mapped with column values with source file as we have to insert data in target table.
See below diagram for more clarification.
I want to load flat files into a single table. But the flat files can have variable number of columns upto a maximum of 10 columns. The table in my database has 10 columns in it. So in case if I load a flat file having 6 columns then rest of the columns in the table will have nulls. I don't want to use script task for this as I am not good in writing C#code.
View 5 Replies View RelatedI am facing a problem i just want total no row count and it should be show in header .So how can i do in SSIS
Suppose
eg. HeaderName , 3
data1
data2
data3
FooterName,3
I am facing one process related issue.
I have one task in which i have to collect lots of .txt file having ## delimiter my requirement is to convert the delimiter from ## to comma and save the new file with .dat extension in different folder.
I have done all required process and run the application which should flow like collect source .txt file do Script component processing and create new .dat file with processed data in Data Flow task, but in my Task the Source and Destination start on same time and process start after words which cause empty file or some time a.txt file data stored in b.dat file where as a.dat file is completely empty.
The process should flow in sequence but behavior is totally against the process, i am using Foreach Loop Container for pick up each file.
I set up a connection file in order to move data from sql to csv files. I should be at the last step, the data flow. but:I don't see any flat file in my destination assistant.
View 23 Replies View RelatedIf I can select an input flat file via a dialog box, or it is necessary to either hardcode the file name or change the filename everytime to a similar format; &How can a query be run and processed in SQL right after input of a flat file to continue?
View 3 Replies View RelatedPublic Class ScriptMain
Inherits UserComponent
Dim smpid As String
Dim Prdt As String
Dim rcnt As Int64
[code]...
Using the Vb script above I am expecting to read the first row from a flat file source and transferring the data into two variable using script component.
SQL server 2008.
Script task Custom Properties:
Script Task Input Columns:
I get the following errors one after the other:"The collection of variables locked for read and write access is not available outside of PostExecute." "Object reference not set to an instance of an object."
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedI have a Stored proc which on execution, will generate data in the view .
My requirement is using SSIS, how can I create a Flat file pointing to this view ?
I have a flat file which have some record data ex.
id name team
1 "A"my" "Bl"ue"s"
2 "Bob" "Reds"
3 "Chuck" "Blues"
4 "Dick" "Blues"
in above example first record contain invalid data so complete flat file will not import due to one invalid row or record in flat file. so is there any way to check invalid row from flat file and ignore it(write log about invalid record) and process importing flat file.
I have a flat with few columns
FirstName, lastName, Address
f1,l1,a1
f2,l2,a2
I build my SSIS package based on the above file.But now i receive files with different columns order let say
lastName,FirstNamr,Address
l1,f1,a1
L2,f2,a2
or
Address,FirstName,LastName
a1,f1,l1
a2,f2,l2
every time i receive multiple files in different order and i have to remap all my mappings. These are just a few columns and i have like 20 columns and the order can potentially change any time. so every time i have build new packages remap them etc.
through normal c# code it pretty easy. I tried to add script here but the script also needs a source and mapping so there is also a mapping issue. Is there a better way to do this.
I have three tables in data base:
customer
product
sales
And i want to use SSIS package dynamically load data from database into three separate flat file, each table into each file.
I know i got to use for each loop task ADO.Net schema row set enumerator, with OLEDB connection manager, select table name or view name variable from access mode list, but the problem comes, as table name is dynamic then flat file connection is also dynamic, i am using visual studio 2013...
Hi Guys,
I
have a flat file which is loaded into the database on a daily basis.
The file contains rows of strings which I load into a table,
specifically to a column of length 8000.
The string has a length of 690, but the format is like 'xxxxxx xx xx..'
and so on, where 'xxxx' represents data. So there are spaces, etc present in the middle.
Previously
I used SQL 2000 DTS to load the files in, and it was just a Column
Transformation with the Col001 from the text file loading straight to
my table column. After the load, if I select len(col) it gives me 750
for all rows.
Once I started to migrate this to SSIS, I
allocated the Control Flow Task and specified the flat file source and
the oledb destination, and gave the output column a type of String and
output column width of 8000. But when I run the data flow task it
copies only 181 or 231 characters out of the 750 required.
I feel it stops where it finds the SPACES and skips the rest.
I
specified row delimiters or CR, and LF. I checked the file under
UltraEdit and there were no special characters in the file that would
cause the problem.
Any suggestions how I can get it to load the full data?
Thanks
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
Import.csv file looks like,
TABLE_NAME DESC CODE
tab1 table1 A
tab1 table1 B
tab1 table1 C
tab2 table2 D
tab2 table2 E
tab2 table2 G...
First column values are table names which are already exists in target database. Next two columns[Desc],[Code] data gets populate from CSV file to table.
In this scenario, how to load tab1 data into the same table in destination and so on.
Which way will be more standard to accomplish this task? If its a script task using C#, looking for clear script to identify a value changes in the first column.
I have a requirement to load bulk of csv files to sql table. some times, some columns could not come in csv file(some times 100 columns and some times 80 cloumns). That time the package is getting failed. How to create a table dynamically based on csv file structure.
View 8 Replies View RelatedFacing problem while loading date in MS SQL Server 2005 from excel file (csv format).
How to load the excel file data without changing the excel file (csv format) .
see the [Start Date] and [ Exp End Date] having values like this : " 2015/07/31"
I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?
View 2 Replies View RelatedI have a Data Flow Task within a ForEach loop container. The source of the flow is ADO.NET connection and the destination is a Flat File Connection. I loop through a collection of strings in the ForEach loop. Based on the string content, I write some data to the same destination file in each iteration overwriting the previous version. I am running into following Errors:
[Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
[Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
[SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
I know what's happening but I don't know how to fix it. The first time through the ForEach loop, the destination file is updated. The second time is when this error pops up. I think it's because the first iteration is not closing the destination file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.
My Requirement ,In Source Database 5 tables are there ( Emp,Loc,dept,Time,Product ), Destination is Single Excel file.But Dynamically how to load each table information to load into each sheet wise through SSIS Package?
View 3 Replies View RelatedWe have a few customers dropping files in Amazon S3. how to load this data into SQL Server 2008 R2 database using SSIS? We are 2008 R2 BIDS environment.
View 5 Replies View RelatedWe are using SQL Server 2014 and SSDT-BI 2013. We have a reporting environment where business users create objects which need to be persisted for fiscal year reporting. Let's say for instance SQLSERVER1SRVR1 they create table objects like below in the reporting environment.
Accounting2014, Accounting2015 in AccountingDB;
Sales2014, Sales2015 in SalesDB;
Products2014, Products2015 in ProductsDB;
Inventory2014, Inventory2015 in InventoryDB etc....
These tables are persisted for auditing in a different environment SQLSERVER2SRVR2 for finance & audit folks.We would want to automate this process using SSIS to create tables in corresponding database and load data. I tried using For Each Loop container but the catch is I could loop the source or destination but how do we loop on Source & Destination at the same time (i.e when source is in AccountingDB destination to be AccountingDB, source SalesDB then destination SalesDB so on etc....
I am looking for solution for "Communication link failure" since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
SQL server 2008 R2 Enterprise Edition and error description is below,
Started: 6:22:40 AM Error: 2015-08-19 18:50:32.70 Code: 0xC0202009
Source: Data Flow Task Lookup [193]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
[Code] ....
In my SSIS package I have flat files as a source, I have to load numbers of flat files into SQL target table. I am using For each loop container for that. I am doing it correctly. My aim is to validate the source data from all angle before writing it into target sql table. I am using below points to validate the source data , if I found any bad data I am redirecting those data to error output.
To Checking
1. To check whether data type of column.
2. To check whether buisinesskey column null.
Is there any thing which I am missing to validate source data.
Screen shot for reference
I am loading data using SSIS 2008 from a table in SQL Server 2008 DB to excel 97 sheet pre-defined with column headers. All the columns in excel is has 'Text' format property and the columns in the SQL Server table are defined as nVarchar. One of the columns has trailing spaces in few rows in DB but after exporting to excel 97, the spaces are gone. We need to retain the whitespaces in the column values. How can we do that.
View 3 Replies View Relatedhow do you load the multiple flat files to into destination dynamically?
View 9 Replies View RelatedI am new to SSIS....
I have a very simple package that has a flat file source object and an ole db destination object in the data flow. All works fine.
If I change a row in the flat file to make it fail how do I make the program continue and go to the next row?
The ole db destination does not have a Error Output properties like the flat file source does.Thanks
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedLooking for sample ETL package to extract data from SQL Sever Database and load into Oracle Database using SQL SERVER INTEGRATION SERVICES 2008. The requirement is for full load and incremental load both.
View 5 Replies View Related