Integrity Checks Job Failed
Jul 29, 2004Hello, I had a DB Maintenance plan, the schedule is every day, but today I found teh 'Integrity checks job is failed". What is that mean? How to check this. Thanks.
View 14 Replies
ADVERTISEMENT
Integrity Checks Job Failed
May 10, 2006Activity: Check Data and Index Linkage
Error Number: 3624
Severity: 20
State: 1
The errorlog has this:
SQL Server Assertion: File: <p:sqltdbmsstorengdrsinclude
ecord.inl>, line=1447
Failed Assertion = 'm_SizeRec > 0 && m_SizeRec <= MAXDATAROW'.
There is a dump file generated also.
I had run DBCC CHECKDB and no error is found.
Any help is appreciated.
Thanks
Integrity Checks
Aug 21, 2002On weekends I have Integrity Checks scheduled to run. Many of these fail for individual databases because users do not log off and the databases cannot be switched to single user mode.
I have checked Books-on-line and have not yet stumbled onto a TSQL command that breaks the connections.
Is there a TSQL command to do this? If not, how can these connections be broken?
Integrity Checks Failing
Apr 21, 2003I have a few databases on this Windows 2000 Server running
SQL 2000 which were detached from SQL 7.0 and attached to
SQL 2000.
The problem is the Maintenance Plans (Integrity Checks
keep failing on SQL 2000. I 'DTS'ed a SQL 7.0 database to
this SQL 2000 server and ran the Maintenance Plans on that
database. Works fine only for the DTS'ed database.
What am I missing ???
:confused:
Integrity Checks Job Failing
May 7, 2007Hi,
SQl Server 7
I have Daily User DB Integrity Checks job running daily
From past 2 days i am getting below error.
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 35 consistency errors in table 'Prod_Hist' (object ID 2098106515).
[Microsoft][ODBC SQL Server Driver][SQL Server]CHECKDB found 0 allocation errors and 99 consistency errors in database 'Ucatalog'.
[Microsoft][ODBC SQL Server Driver][SQL Server]repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB (Ucatalog repair_fast).
[Microsoft][ODBC SQL Server Driver][SQL Server]DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Please suggest..
Thanks in Advance
Adil
SQLMaint Integrity Checks Failure
Aug 30, 2005My SQLMaint integrity checks consistently fail when the "Repair any minor problems" option is checked. The reported reason is that the database must be in single user mode. This doesn't seem practical. Am I missing an option somewhere?
View 1 Replies View RelatedIntegrity Checks Job Question In Sql 2000
Dec 3, 2007The integrity checks job on the user databases failed over the weekend and here is the error I got from the report:
Database DB_Stores: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 7919:
[Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed.
Database needs to be in single user mode.
The following errors were found:
[Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed.
Database needs to be in single user mode.
** Execution Time: 0 hrs, 0 mins, 1 secs **
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 5070: [Microsoft][ODBC SQL Server Driver][SQL Server]
Database state cannot be changed while other users are using the database 'DB1'
[Microsoft][ODBC SQL Server Driver][SQL Server]ALTER DATABASE statement failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]sp_dboption command failed.
Googled the issue and found some articles on this issue, but wanted to also run it by you.
I looked at the maint plan properties and under the integrity tab of the maint plan attempt to repair any problems is checked, this is what I think:
Since attempt to repair is checked, the db was trying to repair the issue and since users were logged into the system
it could'nt repair the issue as the system needs to be in single user mode. I think if we uncheck the attempt to repair
option, then the job would run fine.
But is this the best way to do? how about the errors it was trying to repair? Do we have to fix the error's it was trying to
fix later by changing the db to single user mode.
PLease let me know your ideas, thanks!!
SQL 2012 :: Backup Job And Integrity Checks Are Failing?
Sep 27, 2015I am using sql server 2012 with HADR (Always on with sql cluster).
We have database maintenance plans through wizard for full backup & DBCC CHECK DB. It was running successfully but it failed with the below error
Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection.
(A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)).
(A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)).
I can able to take the backup from query window. It is succesful. The Sql Agent has full permissions. I don't think there are any recent changes happen.
Automating Process Of Database Integrity Checks
Feb 1, 2007Hi,
I want to automate the process of database integrity checks in sql server any suggestions how to do
Maitenace Plan Check Database Integrity Task Fails With Failed:(0) Alter Failed For Server 'xyz'
Feb 21, 2008
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
Integrity Check Failed
Mar 13, 2008on sql server 2000, try to do integrity check on several database once a week but failed, what would be main area to look up? thank you
View 3 Replies View RelatedIntegrity Check And Optimization Job Failed
Jul 3, 2006I found the following error in my maintenance plan please help me on this
Under maintenace plan history i found this error:-
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.
and jobs failed with following error
i found this error in job history of optimization & integrity check jobs:-
Executed as user: XXXXadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Please help me find out the solution
Thanks in advance
Regards,
Sumit
Check Database Integrity - Failed
Feb 16, 2007I have setup a full maintenance plan on SQL2005. When I run the job, I don't see any error but by loooking at the Log file viewer it appears that Check Database Integrity step failed because :
Alter failed for Server 'LUMONT001'.
Moreover, when I run DBCC CHECKDB from the console I have no error message. Any clue?
Thanks, Paul
FK Checks
Jul 20, 2005Suppose you have two (or more) tables with foreign key constraints. Myquestion is thus:Is it better to check if the fk exists before you try to perform theinsert or let SQL do it for you?On one hand, if you check yourself and the key does not exist you cangracefully handle it (maybe exit out of method with error). If you letSQL do it, the server will throw an error which cannot be suppressed.On the performance side, you doing the check will incur a slight (VERYslight) hit since SQL will ALSO check anyways.
View 3 Replies View RelatedHealth Checks On SQL
Jul 15, 2004I'm starting to collect and develop some scripts that will tell me the health and welfare of my MSSQL 2k server. I have a few for blocks, db size, who is on and what they are currently running.
I was wondering if you guys could share some of the scripts you guys use to watch the health of your servers.
Thanks,
DMW
Health Checks
Jul 15, 2004I'm starting to collect and develop some scripts that will tell me the health and welfare of my MSSQL 2k server. I have a few for blocks, db size, who is on and what they are currently running. I was wondering if you guys could share some of the scripts you guys use to watch the health of your servers.
Thanks,
DMW
Rules Vs Checks?
Jan 23, 2007Hi experts,
What is the difference between, Creating rules and creating checks on a field?
They both look the same.
Regards
sachin
Don't sit back because of failure. It will come back to check if you still available. -- Binu
Num Of Checks Written In 4 Day Period For More Than $400
Apr 25, 2006I have a transaction table which has Date as datetime field, amount and account number. i want to find out count of checks that were written in a period of 4 days which exceeded i.e. > $400, between 401 and 500, > 501 for a single month. the table has data for more than a year and i want the results then grouped in monthly format like in
OCT between 300 & 400 #30 (30 customers gave checks total worth $300-$400 within any 4 consecutive days period in the month of OCT )
between 400 & 500 # 20
> 501 # 10
NOV between 300 & 400 #30
between 400 & 500 # 20
> 501 # 10
and so on for a 6 month period.
Daily/Weekly Checks
Jun 24, 2008What daily/weekly checks do you guys currently perform on your servers and databases?
I recently ran across with an article from SQLServerCentral that listed a couple of daily checks that I'm thinking about implementing on my environment, and some of them are:
DB Missing Recent Backup - Report
DB Missing Recent Log Backup - Report
Drives Low on Disk Space - Report
Error Log Messages Report - Report
Instance Recently Restarted - Report
Job Failures - Report
Large Databases Log File - Report
I already have in place:
Verify is SQL Agent Service is running
Check Disk Space Available
Since I'm going to spend some time on this, I was wondering if there's anything else that you guys have in place or any other 'nice to have' that you guys also might have, so I don't leave anything behind...
Thanks!
---
http://www.ssisdude.blogspot.com/
Conditional Checks In SSIS.
Apr 11, 2007I have two connections in a package pointing to two different databases
on the same server. I have to insert records from 'DB1' table 'Gender1'
to 'DB2' table 'Gender2'. Before I do that though, I have to make sure
the minimum value (of all the Gender Keys that are going to be
inserted) of 'DB1' 'GenderKey' (which is an identity field) is greater than the
maximum value of DB2-GenderKey (which is a primary key but not an
identity field). How can I do this simple check? I have to do this process for many different tables ....... Gender table is just an example. If someone can give an detailed explanation on which tasks to use and how to use them (as I am relatively new to SSIS) that'd be great.
Constraint Checks After Insert
Feb 27, 2008
Hi all,
I'm trying to use a custom check constraint to insert into a table. I have created a function that checks an item against a authorization date as well and I've coupled this into the constraint. So for example, my function starts:
Code Snippet
ALTER FUNCTION {function1} (@ItemID INT, @AuthDate DATETIME)
RETURNS INT
AS
BEGIN
DECLARE @Ret INT
SET @Ret = 0
IF NOT EXISTS(SELECT top 1 ItemID FROM {table1}
Where b1.ItemID = @ItemID
AND @AuthDate <= ISNULL(b1.expirydate, @AuthDate))
BEGIN
SET @Ret = 1
END
ELSE
BEGIN
SET @Ret = 0
END
RETURN(@Ret)
END
GO
Now i couple that into a check constraint for the same table:
Code Snippet
ALTER TABLE {table1} ADD CONSTRAINT {contraint_name} CHECK (([function1]([ItemID], [AuthorizedDate])=(1)))
GO
Now, when i insert a record into this table with an Authorized Date greater than the ItemDate it should set the @ret value to 1. This is being passed back to the constraint should set 1=1 which is true and therefore should allow an insert, however, i cannot do this. I think this is because it inserts the record and THEN does the check which makes it fail. Is there anyway to do this check before the INSERT without having to use a trigger? I dont want to use a trigger because when we're doing an insert for bulk rows, performance decreases correct?
Referential Integrity Constraints W/o Referential Integrity In The Db?
Mar 16, 2007Using the new referential integrity constraints that will be made available, will it allow us to manually define the relationships between entities even if there is no true foreign key constraints setup in the database?
Lets say we deleted the FK_Orders_Customers in Northwind between orders and customers.
Or is this ability available now?
Thank for your time.
Help - Conditional Checks Within A SQL Query - Other Ways Of Doing It?
Jun 13, 2007I'm trying to simplify a SQL Stored Procedure.The query accepts an int, @ItemTypeID intI have the Query:SELECT ... FROM ItemList WHERE ItemTypeID = @ItemTypeIDor, if @ItemTypeID is 0,SELECT ... FROM ItemList Is there a way to do this query without doing:IF @ItemTypeID = 0BEGIN ...SELECT QUERY...ENDELSEBEGIN ...SELECT QUERY...END?
View 5 Replies View RelatedHelp - Script That Checks For OFFLINE Database
Sep 21, 2006Hello ,
I have got a script which checks for the databases that are offline. and mails the dba when any of the database is offline.
When I schedule the job , for every hour , it gives me an blank mail only with the subject ' status of database on testsql' even though no databases are offline.
So how can I change the script , so that it mails the dba only when a database is offline even though its scheduled every hour or half an hour.
The script is:
Set NoCount on
DECLARE @dbname VARCHAR(100)
deCLARE @Status varchar(100)
Declare @Message VARCHAR(8000)
DECLARE @date varchar(100)
set @date = convert(varchar(100), getdate(),109)
set @Message = ''DECLARE dbname_cursor
CURSOR FOR SELECT [name], CONVERT(varchar(30),DATABASEPROPERTYEX(name,'Statu s'))
as [Status] FROM master..sysdatabases WHERE CONVERT(varchar(30),DATABASEPROPERTYEX(name,'Statu s')) = 'OFFLINE'
order by name
OPEN dbname_cursor
FETCH NEXT FROM dbname_cursor INTO @dbname, @Status
WHILE
@@FETCH_STATUS = 0
BEGIN select @message = @message + @@Servername + '-' + @dbname + ' - ' + @Status + Char(13)+ ‘- ‘ + @date
FETCH NEXT FROM dbname_cursor INTO @dbname, @Status
END
CLOSE dbname_cursor
DEALLOCATE dbname_cursor
print @message
EXEC master.dbo.xp_smtp_sendmail
@FROM = N'testsql2000@is.depaul.edu',
@TO = N'dvaddi@depaul.edu',
@server = N'smtp.depaul.edu',
@subject = N'Status of the Database on Testsqlserver!',
@type = N'text/html',
@message = @message
Thanks
Dev Code For Database Exists Checks
Mar 1, 2006I want to check to see if a database exists in SQL Server 2005 Express... using VB.NET (or C#)... Can not use the SQLConnection Object... because I get a Failed Login Attempt... regardless if the DB does not exist or if it is because the User Login is incorrect
Is there some way to check to see if the Database exists (is attached) to the SQL Server 2005 Express Engine?
ward0093
TSQL Checks File Existence?
Sep 3, 2007Hi,
Does TSQL provide methods to check if a file exists?
For example, a TSQL script will read data in a .dbf file into SQL Server. It will check if the file exists before read. How to do this check?
Thank you.
SQL 2012 :: Optimal Settings For DBCC Checks?
Aug 5, 2014I have a VM set up for offloading DBCC checks. Specs are below. I've read through this, but I'm not seeing the performance gains by enabling the trace flags and using the physical only switch.
Is the whole drawback that I'm on SATA storage? Is there a VM configuration with the CPU I can/should change? I've been playing with MAXDOP trying to see if I can get any benefits but I'm not seeing a much.
wait_type wait_time_spctrunning_pct
CXPACKET 561191.4228.7128.71
OLEDB 387136.7619.8148.52
PAGEIOLATCH_SH 340674.5817.4365.95
TRACEWRITE 321598.8416.4682.41
[code].....
Transact SQL :: Run A Query That Checks A Column To See If Its Numeric
Jul 14, 2015I am trying to run a query that checks a column to see if its numeric. If it is, it should cast as a float, if its not numeric it should return 0.
select case when (isnumeric(Ref)=1) THEN select (cast(Ref,float) )
else (0) as outputfrom #table
but its returning an error.
Script Which Checks When Running Out Of Auto-growth Extents?
Feb 24, 2015I'm looking for hints/tips/url for a script which can be run a few times per day and either sends an email or alert for the following condition:
Script would function like:
[URL]
Databases - Dynamic Log File Growths Remaining Alarm
Dynamic Log File Growths Remaining alarm becomes active when a non fixed size log file in any database is in danger of running out of space to grow. It is raised when a log file is almost full and the file cannot automatically grow enough to relieve the problem.
We have our databases with Enable Autogrowth (in Megabytes), and then a Maximum File Size (Limited to a MB value).
Example: If one of the database logs (or possibly filegroup primary) picks up another extent and is about 5 extents (arbitrary value) away from running out of growth room, an alert would be sent to an email address/profile.
P.S. Yes, there are multiple databases on this one instance and the script should loop to run through all of them.
Stored Procedure That Checks To See Whether A Value Exists And Only Enters Data If It Doesn't
Feb 4, 2008Hi All,
I Have a nifty little stored procedure that takes data from an ASP form post
and inserts the data into two tables. However what I really need this to do
before the insert is check whether there is already a record that matches
some of the criteria, and if so returns an error "This Username already
exists" and only if there isn't a record that matches the criteria is the
record inserted.
my current stored procedure looks like this -
Code Snippet@siteid int,@companyname nvarchar(50),@address nvarchar(500),@phone nvarchar(50),@fax nvarchar(50),@email nvarchar(225),@url nvarchar(225),@companytype nvarchar(50),@billingcontact nvarchar(50),@name nvarchar(50),@AccountType nvarchar(50),@PASSWORD nvarchar(50),@AccountLive nvarchar(50),@EmployeeLevel nvarchar(50)ASDeclare @NewID INTINSERT INTO dbo.JBClient(JBCLSiteID, JBCLName, JBCLAddress, JBCLPhone, JBCLFax, JBCLEmail, JBCLCompanyType, JBCLURL, JBCLAccountType, JBCLAccountlive, JBCLBillingContact)VALUES (@siteid, @companyname, @address, @phone, @fax, @email, @companytype, @url, @AccountType, @AccountLive, @billingcontact)SELECT @NewID = SCOPE_IDENTITY()INSERT INTO dbo.JBEmployee(JBEClientID, JBESiteID, JBEName, JBELevel, JBEUsername, JBEPassword, JBEAddress, JBEPhone)VALUES (@NewID, @siteid, @name, @EmployeeLevel, @email, @PASSWORD, @address, @phone)
The values that i need to check against are -
@siteid
@email
in the table dbo.JBEmployee against columns JBESiteID & JBEUsername
What i would really like to do if a record exists is return the user to an
ASP page, which contains all of the variables previously enterred -,
@siteid int,
@companyname nvarchar(50),
@address nvarchar(500),
@phone nvarchar(50),
@fax nvarchar(50),
@email nvarchar(225),
@url nvarchar(225),
@companytype nvarchar(50),
@billingcontact nvarchar(50),
@name nvarchar(50),
@AccountType nvarchar(50),
@PASSWORD nvarchar(50),
@AccountLive nvarchar(50),
@EmployeeLevel nvarchar(50)
together with a message that says "This Username already exists"
Does anyone have any idea how to do this???
Many thanks
Integration Services :: Data Type Checks In SSIS Package
Oct 13, 2015I have to perform several data checks before loading data into target table. For example I am having 1 flat file with below column
Id Name Age
Int Varchar(100)Â Int
My requirement is to create  package, checks will be performed on each record, column of the files. Any records which failed the checks considered as error records and will be written to the exception table.
Do I Need More Integrity On My DB?
Jul 5, 2004I am not sure I need more integrity on my DB. My DDL are down below.
thanks
************************************************** *****
create table person(
personId int identity(1,1) primary key,
fName varchar(25) not null,
mI char(1) null,
lName varchar(25) not null
);
create table student(
studentId char(4) not null primary key,
personId int not null
);
alter table student
add constraint fk_person_student
foreign key (personId)
references person (personId)
;
create table instructor(
instructorId char(4) not null primary key,
instructorQual varchar(100) not null,
personId int not null
);
alter table instructor
add constraint fk_person_instructor
foreign key (personId)
references person (personId)
;
create table contract(
contractNum int identity(1,1) primary key,
contractDate smalldatetime not null,
tuition money not null,
studentId char(4) not null foreign key references student (studentId),
contactId int not null foreign key references contact (contactId)
);
create table contact(
contactId int not null primary key,
fName varchar(25) not null,
mI char(1) null,
lName varchar(25) not null,
street varchar(50) not null,
city varchar(25) not null,
state char(2) not null,
zip char(5) not null,
relationship varchar(25) not null,
phNum char(12) not null,
emailAdd varchar(50) null,
);
create table class(
classNum char(4) not null primary key,
className varchar(25) not null,
classDay char(3) not null,
classTime char(8) not null,
testNum char(5) not null
);
alter table class
add constraint fk_class_testnum
foreign key (testNum)
references test (testNum)
;
create table discount(
discountNum char(3) primary key,
discountDesc varchar(100) not null,
discountPer decimal(3,2) not null
);
create table test(
testNum char(5) primary key,
testName varchar(50) not null,
testDate smalldatetime not null,
testFee money not null,
);
create table studentClass(
studentId char(4) not null,
classNum char(4) not null,
pass char(1) not null
);
alter table studentClass
add constraint pk_studentclass primary key clustered (studentId, classNum)
;
alter table studentClass
add constraint fk_studentclass_studenttid
foreign key (studentId)
references student(studentId)
;
alter table studentClass
add constraint fk_studentclass_classnum
foreign key (classNum)
references class(classNum)
;
create table contractDiscount(
contractNum int not null,
discountNum char(3) not null
);
alter table contractDiscount
add constraint pk_contractdiscount primary key clustered (contractNum, discountNum)
;
alter table contractDiscount
add constraint fk_contractdiscount_contractnum
foreign key (contractNum)
references contract(contractNum)
;
alter table contractDiscount
add constraint fk_contractdiscount_discountnum
foreign key (discountNum)
references discount(discountNum)
;
create table instructorClass(
instructorId char(4) not null,
classNum char(4) not null,
);
alter table instructorClass
add constraint pk_instructorclass primary key clustered (instructorId, classNum)
;
alter table instructorClass
add constraint fk_instructorclass_instructorid
foreign key (instructorId)
references instructor(instructorId)
;
alter table instructorClass
add constraint fk_instructorclass_classnum
foreign key (classnum)
references class(classnum)
;
MDF Integrity
Jun 8, 2007Hi all,
Is there any way to check the integrity of .Mdf file before attaching it to a database means to check whether its valid (or) not.
Thanks.
//Najeed