SELECT * from table where city like '%woshington%'
Now this would return nothing, as there is no city like woshington. but google find results and ask as r u looking washington. so would u please tell how I may write an intelligent SQL like query
I am looking for some T_SQL code that would help us eliminateduplicate data entry into our mailing db. Finding and removing theexisting dups is not rocket science, but I am looking for a completesolution.We also want to be able to come up with a T-SQL script to beintelligent enough to know if:"Bill Jones" is the same as "Billy Jones" or"Bill Jones" is the same as "William Jones" or"Bill Jones at 123 My street" is the same as "Bill Jones at 123 MySt."Purchasing scripts from a company is not out of the question. Its amatter of script cost versus my hourly rate to create them... Needlessto say, something cheap.We have only heard of one app that is dynamic enough to handle this,and the cost was way, way out of our range, 6 figures is almost 2years salary.Any ideas would be greatly appreciated.
View 4 Replies View Related
Hi, friends.
I make a big mistake like this:
First, I installed the sql server 2005, Second, I installed the VS.net 2005 (vb.net). After that, I uninstalled the VS.NET 2005. Then I found after I uninstalled the VS.NET, the Business Intelligent Management Studio is gone too. I install the VS.NET 2005 again.
Now I could use the Business Intelligent Management Studio to open a SSIS project and a package, but there is nothing in the toolbox in it. Also the IDE could not recognize any object inside the ETL package, like the Task, the Compoment, etc. So I think that the Business Intelligent Management Studio is still not be really installed. The IDE is the VB.NET, and something needed to deal with the ETL package is missing.
How to fix the Business Intelligent Management Studio? I mean, how to make my vb.net to deal with an ETL package agian?
Thanks!
Hi all, I run several contact websites. One of them is www.ramc.org.uk - they used to fill in a form and results emailed to me. I then manually copied and pasted into page on server. Very tiresome.
I was hoping with sql express i could create a page where they enter there details into the database after verifying details via a link..... Then as the new details are added they would be displayed on the contacts page in alphabetical order.
Is this really possible or even feasable.
Cheers, your all stars. Mark
hi all
i try to get data from sql as
select * from datetable where @d between firstdate and lastdate
i add parameter @d and the type is datetime
when i excute the quiry
An error occurred while reading data from the query result set.Arithmetic overflow error converting expression to data type smalldatetime.
how can i fix that plz
Hi all,
I desperately need to setup the AD-HOC reporting on SQL server 2005.
I think one of the templates that I need is in Business Intelligent Project Templets Reporting Model Template in Visual Studio Templates.
But I do not see it in there.
Can some one please let me know where can I get the Reporting Model Template, or a link to where I can download or how to create it.
Thanks or any help.
Abrahim
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC ">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
Maurício
SQL Server 2012 Performance Dashboard Main advices me this:
Since the application is from a vendor and I have no control over its code, how can improve this sitation?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN
SET NOCOUNT ON
SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
RETURN 1
END
GO
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
View 2 Replies View RelatedHi there. I have occasional sincronization error.-XSUBSYSTEM Merge
-XSERVER MYSERVER
-XCMDLINE 0
-XCancelEventHandle 000006E0
2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01'
2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01'
2006-12-22 14:55:02.974 Initializing
2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01'
2006-12-22 14:55:06.005 Retrieving publication information
2006-12-22 14:55:06.130 Retrieving subscription information.
2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric.
2006-12-22 15:00:07.800 Category:SQLSERVER
Source: Subscriber01
Number: 8114
Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
Hi Everyone:
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.
Hi all I'm using Sql server 2000 and sometimes i need to run my Queries in Query analizer before using them in my application just to test them...BUT most of the time when i run a query in query-analizer for second time ,query analizer populates the result (records) more quicker then the first time. Apparently it caches the query !!! i don't know but for some reasons i dont't want this , so how can i prevent Query-analizer from doing so?
Thanks in advance. Regards.
I have a vb.net page that I need to display a list of employees who work in a specific office, based on a MatterID passed in a query string. But, I don't know how to get a value returned from one sql statement into a second. Here's what I'm trying to do...
From the QueryString, we know that the MatterID = 4 ( xxx.aspx?MatterID=4)
Knowing that the Matterid=4, I query the database to get the OfficeId for that MID (Select OfficeID from tMatter where Mid=4) ~This returns an OfficeID of 6
So, then I need to do another query to get the employees where OfficeID = 6 (Select EmployeeID from tEmployees where OfficeID = 6)
How do I do these in one query, or how do I use the Calculated Value for the OfficeID in the 2nd statement?
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
I have successfully execute a union query. How can i create a make-table query to accomodate the resultset of the union query?
View 2 Replies View Related