I have a Merge-Pull subscription setup between two SQL 2005 databases. While watching the status messages display for the subscription, I am constantly seeing the following message being displayed:
"The merge process could not connect to the Publisher '{server}:{database}'. Check to ensure that the server is running."
It will display for anywhere between 15 seconds to a few minutes, then it will display the standard "Waiting 60 seconds..." message which is what I'm used to seeing when all is working well.
There doesn't seem to be any network issues that I can identify. I ran a quick script to run ping continuously against the publisher server and verified that the server was constantly "pingable", even when the above message was displayed (which, by the way, was being displayed by using SSMS while connected to the publisher).
Does anyone know what would cause this message to appear all the time - for extended amounts of time, with occasional glimpses of a non-error status?
I've had a web service developed in PHP5 running on an Apache webserver for the last 9 months. It handles a lot of XML requests and stores/reads from an MSSQL Server 2005 DB (Express, if that matters).
Occasionally, I will come across the error 'Could not connect to database'. Refreshing the page works 99% of the time removes the error and the system continues as normal. I'd say this is happening about 1/100 requests at the moment, and my client is steadily becoming more irritated by it.
As far as I know, the system settings are mainly stock. It was set up by another developer.
I'm out of ideas with regards to debugging this problem. Can anybody shed some light, or some possible solutions?
I'm getting some odd intermittant missing character problems when displaying text from a 'text' column. The text is in plain English with no unusual or non alphanumeric characters. Every so often the text is displayed with a character missing somewhere in the middle of the text.
I have tried to look at what is stored in the database but cannot seem to view the contents of the 'text' column using Enterprise Manager.
The following extract shows two lines of text which are list items (<ul>). The second line shows a lowercase 't' missing on the word dedicated. This line was copied from the first. Sometimes it displayes correctly and at other times the 't' is missing.
EXAMPLE: The only dedicated wine travel website with producer recommendations from a team of well known wine writing experts. The only dedicaed wine travel website with independent recommendations of places to stay and eat.
This is doing my head in as I can find NO logical reason for it.
If anyone has any clues as to where I should be looking for some answers I would be delighted to know.
this is the erro that I keep getting.... {"Cannot open database "mydb" requested by the login. The login failed. Login failed for user 'XLORDT\xlordt'."} now.. Im using sqlexpress the one that comes with visual studio.. what do i need to do to fix this?
I'm attempting to configure a new Microsoft OLE DB Provider for DB2 connection using the provided Data Access Tool and Wizard. I'm configured for DB2MVS TCP/IP and have my Catalog and other defaults set. When I go to connect I get the following:
Could not connect to data source 'New Data Source': An internal network library error has occurred. A network level conversational protocol error has occurred. SQLSTATE: HY000, SQLCODE: -343
The port I've configured is what is used when we use the IBM OLE DB and ODBC drivers.
I turned on tracing and tested the connection again and recieved only the following in a file that got named DB2MSG1.ATF. We have been struggling with this for awhile, any help is greatly appreicated.
When the databse file's "copy to output" property is set to "copy always" my data is not saved and when I change it to "do not copy" it gives me the error "cannot attach the database file", and does not open my connection. I dont know what to do.....
I'm currently using database mirroring as a hot-standby, without a witness. Everything appears to be running fine, but I'm receiving intermittent errors that appear to state that my servers are loosing connectivity, thus disabling (inactivating) the mirror until the connection has been reestablished.
The errors are listed below, basically, I note a block of log entries for each mirrored database stating that mirroring is inactive for the database(s), next Error 1474, next the connection error, then another block of log entries for each mirrored database stating that the mirroring session is once again active.
Database mirroring is inactive for database 'NetRS'. This is an informational message only. No user action is required.
Error: 1474, Severity: 16, State: 1.
Database mirroring connection error 4 '64(The specified network name is no longer available.)' for 'TCP://SQL01NRS:7024'.
Database mirroring is active with database 'Telephony' as the principal copy. This is an informational message only. No user action is required.
I have confirmed that the sessions are in sync, so am not concerned about the data - but would love to get rid of these errors / disable / enable. I'm assumming that if I had setup a Witness, that I would see the mirrored database flip-flopping back and forth between Principal and Mirror.
Please let me know if I can provide any additional details to assist ...
We just upgraded our accounting packages database from Pervasive 8.1 to V9.11. MY SSIS extract packages were working just fine. Now I am getting several erros stating that some columns cannot be found:
For example, in the [sysdtslog90] table, I have these errors:
Column "CreditLimitAmt" cannot be found at the datasource. or
Column "RsrvRptky" cannot be found at the datasource. (from a different pkg)
The table schemas did not change, the columns still exist. The SQL I use also runs just fine in the client interface.
Has anyone experienced this? The bottom line is that now the extract packages are broken.
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel source will fail.
I have it so that for each iteration if the transform was successful the file is moved to an archive directory, and if it fails the file is moved to a different directory.
But I don't want the package to be marked as failed. For the control flow tasks I have set the individual components to FailPackageonFailure = False, and for the Data Flow tasks I have set ValidateExternalMetadata = False.
It no use to set the MaxErrorCount higher because I can't guarantee how many files will be processed and how many might fail.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
"Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
so I tried doing the following
SqlClientPermission pSql = new SqlClientPermission(System.Security.Permissions.PermissionState.Unrestricted);
pSql.Assert();
and then I get this error
"Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."
Hello,I have a Win2K3 Server with SS2005 developers edition. I am working on aWindows XP Pro workstation which has SQL Server 2000 installed as well asthe SQL Native Client. I'm using an MS Access ADP to connect to the serverand for some reason it's extremely slow, even to the point of throwing timeout errors and "can't generate SSPI context" messages. I've hit the MSwebsite and found info on the SSPI error, but none of the items thatgenerate the error apply to my situation. I've tried using the surface areamanager to change the connection to name pipes, name pipes and tcpip etc,but no luck.Is there anything I should be looking at or any known issues that wouldaffect this kind of performance?Thanks!Rick
I have an reporting services (SSRS 2005) installed locally and I am trying to access it locally through : http://localhost/reportserver, but all I get back is this page.
localhost/ReportServer - /
Microsoft SQL Server Reporting Services Version 9.00.3054.00
Also when I try to connect to reporting services through SSMS I get the following error message.
Cannot Connect to Server ServerNameSQL2005
Unable to connect to the remove server (Microsoft.SQLServer.Management.UI.RSClient)
No connection could be made because the target machine actively refused it(System).
About my set up, I have SQL Server 2005 (SP2) installed in a named instance called SQL2005, I have reporting services set up to run under local system and I have gone through the RS config tool and everything in there appears to be correct. U double checked in IIS that the report server folder is "ReportServer" and not "ReportServer$SQL2005". I have set up full read write permissions to all the virtual directories, to my domain account which is also a local administrator. The user logs in under windows authentication (marked in the directory security tab in IIS, for the virtual directory & the default website).
Whenever I start the service however I get the following errors in the windows application log:
Report Server (SQL2005) cannot create the trace log C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__05_15_2008_10_27_52.log.
Also I am unable to deploy my SSRS 2005 project from BI studio with more errors, I get the following exception thrown in a windows. (I am trying to deploy to the root "ReportServer" folder, not a sub folder.
A connection could not be made to the report server http://localhost/reportserver.
System.Web.Services.Protocols.SoapException: Server was unable to process request ---> System.InvalidOperationException: Unable to generate a temporary class (result=1) error: CS2001 "Source File "C:WindowsTempc-zsc7th.0.cs" could not be found.....
I don't have sharepoint installed, I do have the dashboard designer for Performance Point Server 2007 installed though.
I have been on this thing for hours, I have tried appending "$SQL2005" on to the end, stopping and starting RS Service multiple times. Change all the permssions in IIS so that the user can full control over the IIS virutal directory. I am at a loss at what else I could try.
I setup a new ODBC connection to MS SQL Server 2000 on Windows XP and keep getting the following errors when I try to either register a new SQL Server 2000 group within Enterprise Manager or test the new ODBC connection:
Current configuration
- MS SQL Server 2000 -Windows XP -ODBC 3.85.1117
Errors:
I. Within SQL Server 2000 Enterprise Manager
Error: SQL Server connection open
II. When I test the ODBC connection:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
Now here is what has me totally confused:
I can use the command line ISQL to access the database on the server and IP is all correct and port is available.
For some reason, when I try to delete old DB connections from the connection manager, it causes compilation errors because it is not removing the references from the meta data. I get Object ID errors where it is still trying to find the connection after it has been deleted. I have tried going to the code behind and searching then deleting the invalid reference, but that still does not work. I have a connection for 2 totally different databases that are no longer being used in the SSIS package and I would like to get rid of them.
As I was developing my SSIS package, I created several variables and tasks ( FTP, WMI Reader Task ). I am now cleaning up, deleting unwanted variables and connections in the design window. I save and build the package and when I load the package, I get warnings that these variables are referenced but can't find them and errors that the WMI connection is not found.
When a package calls a sub-package, it stores the absolute path of the child package in its dtsx xml file in a Connection String property. How annoying !!! . When I deploy this to another machine with a different file structure, it becomes a problem. Why can't it store the path relative to the parent package, which would be typically in a sub-directory under the parent ?
These last 2 days have been nothing but frustration and my deadline is slipping. Any help is appreciated.
Purpose: Need to import excel source data into SQL Server 2005 tables. Excel source data comes in nulitple excel files with the same structure but different data. I would appreciate someone taking a look at the following information and notifying me of what I am doing incorrectly.
I Inserted a foreach loop container, a data flow task located inside the foreach loop contaiiner, an excel and SQL Server 2005 connections.
After trying multiple times I went the following URL and followed step by step direction on how to connect excel workbooks dynamically: http://msdn2.microsoft.com/en-us/library/ms345182.aspx . I also used http://www.sqlstrings.com/ as a reference when creating the connection string.
Creating a Foreach Loop Container:
1. Opened foreach loop container 2.Set the Enumerator to 'Foreach File Enumerator" and configured the enumerator by setting the directory location and file base name to E:ClientsDep CommBEABEA_Test_Source and *PersonnelExpense*.xls respectively. 3. Clicked Variable Mapping; created two variables called, "ExcelFile", and "ExtProperties" and closed out of the foreach loop container.
I. Created Excel Connection:
Created excel connection called, €œDynamic Excel Connection Manager,€? that initially pointed to one of the excel workbooks. Went to the connection properties by right clicking the connection manager. Expanded Expressions and clicked the ellipsis button to bring up property expressions Chose Connection String in the Property. Clicked the Expression Ellipsis button. Put the following inside the Expression multi line text box: A. "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + @[User::ExcelFile] + ";Extended Properties="" + @[User::ExtProperties] + """
Clicked the Evaluate Expression button to get the following:
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=;Extended Properties="" Clicked Ok button Inserted a Data flow task inside the foreach loop container.
II. Configured Tasks that is associated with Dynamic Excel Connection Manager or Package:
Set the Foreach loop container Delay Validation to true. Set the Data Flow Task Container Delay Validation to true. Set the Dynamic Excel Connection Manager Delay Validation to true. Set the SQL Server Connection Manager Delay Validation to true. Set the Package Delay Validation to true. Package Locale ID set to English
Ran the package after connecting the excel source data flow to the OLEDB destination and have inserted part of the error in this post. Please see below.
Error: 0xC0202009 at Package, Connection manager "Dynamic Excel Connection Manager": An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not find installable ISAM.".
I modified the connection string after receiving the error by removing the extended properties. The following is the modified connection string: "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + @[User::ExcelFile]
I repeated step I.6 above and received the following expression: Provider=Microsoft.Jet.OLEDB.4.0;Data Source=
I ran the package and received the following error in part: OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unrecognized database format 'E:ClientsDep CommBEABEA_Test_SourcePersonnelExpense_OCCs_051007.xls'."
I did not find anything helpful when I searched for the above errors and would very much appreciate anyone€™s assistance on this issue as this issue needs to be taken care of ASAP.
Does anyone have any ideas as to why I received this error and what can I do to resolve this issue?
Your assistance in this matter is truly appreicated! Thanks!! Lee
I am in the process of importing an Excel Spreadsheet using the natively connection manager in SSIS 2008. Â There is one column however that is causing me grief.
SSIS has natively chosen the problematic column to be a DT_WSTR(255). Â I have gone into the Excel connection manager's Advanced Editor and altered it to be a DT_WSTR(1000) (see image 1 attached).
I am still getting truncation issues though, as per image 2 attached. Â why this is?
When I deploy the cube which is sitting on my PC (local) the following 4 errors come up:
Error 1 The datasource , 'AdventureWorksDW', contains an ImpersonationMode that that is not supported for processing operations. 0 0 Error 2 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW', Name of 'AdventureWorksDW'. 0 0 Error 3 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0 Error 4 Errors in the OLAP storage engine: An error occurred while the 'Customer Alternate Key' attribute of the 'Customer' dimension from the 'Analysis Services Tutorial' database was being processed. 0 0
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error. Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
All -- Please help. I have some questions about connection strings.
BACKGROUND...
Note that I am using the "SQL Native Client OLE DB Provider", SQL Sever 2005 Express, ASP.NET, C#.NET, and VS.NET 2005. Note that I do not want to use the "Attach a database file" type of connection string. Note that I am using the site http://www.ConnectionStrings.com as a reference. Note that this "Standard security" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Uid=MyDatabaseUser;Pwd=MyDatabasePassword;" />...does not work and causes the following run-time error...A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) Note that this "Trusted connection" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Trusted_Connection=yes;" />...works but is less-than ideal because it uses a Trusted Connection rather than a Username/Password combination.
QUESTIONS... (A) What exactly does the error in Item 4 mean? (B) Do 4 and 5 imply that one must use a Trusted_Connection for all SQL Server 2005 Express connection strings when the database does not reside in the web application's App_Data folder or use a "Attach a database file" type of connection string? (C) Are there any alternatives? (D) What do you suggest?
We are using the Windows Task Scheduler as a substitute for the SQL Server Agent, which isn't available in the Express edition. The scheduled task just calls a batch file, which in turn, runs a stored procedure using osql with the -E option for a Trusted Connection.
SQL Server Express has been installed using the defaults, which means the service is running in the "NT AUTHORITYNETWORK SERVICE" account. The scheduled task we create is set to run using the "NT AUTHORITYSYSTEM" account.
Now we find that on Windows Vista (tested using Ultimate Edition) that the scheduled task fails to run the stored procedure until the machine is rebooted the first time after installing SQL Server Express. When I say "fail", I mean that the stored procedure isn't executed. The scheduled task however completes and reports no errors. On Windows XP, we do not run into this problem so I suspect it has something to do with the UAC in Vista?
We further found that after installing SQL Server Express and creating the scheduled task in the "NT AUTHORITYNETWORK SERVICE" account, the scheduled task (and stored procedure) runs fine WITHOUT requiring a reboot.
Can anyone explain why a reboot is needed to get SQL Server Express to run the scheduled task correctly under Windows Vista and the SYSTEM account?
Hi, I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" /> <membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership> But when I try to login to the site using the login control the following error occurs: Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager> Line 150: <providers> Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213 It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! . I'm lost and I dunno what to do, can anyone help? Here is the mahine.config in case if you need it:<connectionStrings> <add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings> <system.data><DbProviderFactories> <add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /> <add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /> <add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories> </system.data><system.web> <processModel autoConfig="true" /><httpHandlers /> <membership><providers> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers> </membership><profile> <providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers></profile> <roleManager><providers> <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers></roleManager> </system.web>
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>' My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
When using jdbc with IntegratedSecurity, I run into this problem when the machine is not part of a domain & gets its IP address via dhcp. Is this expected behavior or a bug in the jdbc driver.
The SQLServer and client application are installed on the same machine and a local admin is logged in, running the client app.
If I change one of the two parameters mentioned above, the connection can be established leading me to believe this may be intentional for security issues. Am I correct?
I created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
I am accessing SQL2005 with C# code using OleDbConnection.
A try and catch block catches the following error once a while between the Open() and Close() of the connection:
ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.
I do not even have any idea where to start to debug this. The ExecuteNonQuery() runs a delete SQL query. It works 99.9% of the time. I do not see anything wrong when this error happens.
