Intermittent “[DBNETLIB][ConnectionOpen (Connect()).] Error
Apr 23, 2007
Hi,
I have a classic ASP app that loops through a record set and calls another query based on each record returned. Something like:
sSql = User Query
rsUser = conn.execute(sSql)
do while not rsUser.eof
sSql = Select [Type] From [User Types Display] Where UserId = rsUser(€œUserid€?)
rsType = conn.execute(sSql)
€˜ Put information into HTML table
rsType.Close
rsUser.MoveNext
loop
In general, at around 3575-4000 loops, the system kicks back :
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
UserList.asp Line 300
I get no error message in the SQL Server Logs (according to the server, nothing happened), just this message on my ASP page. This happens about 90% of the time. 5% it runs completely, the other 5% bombs after 1-100 loops.
This only started happening when we took our app from a local Server 2000/SQL 2000 setup to separate Server 2003/SQL 2005 setup.
In SQL Profiler I see the loops hitting with only two reads per batch (TCP/IP). This seems very low compared to named pipes (when in a local server configuration) reads of 15-30 reads per batch.
I know it is not a hardware issue; this behavior is observed in both our test and production environments. All of our other ASP page queries work fine, just the 2 or 3 of hundreds that loop like above. cause the error.
Client Details (as best I could):
Connection String (in .inc file): conn.Open "Provider=SQLOLEDB;Network=DBMSSOCN;Data Source=10.0.1.100;Initial Catalog=€™TestDB';User ID='XXXX';Password='XXXX'"
The Client is Remote to the SQL machine and connects through TCP/IP only.
I force no encryption on the back and forth between the servers.
Server Details:
SQL Server 2005 Standard with SP1
Only Named Pipes and TCP/IP are enabled
I think this is all the info relative to my issue.
Thank you so much for any help,Smith
View 9 Replies
ADVERTISEMENT
Mar 20, 2008
I installed SQL 2005 including backward compatibility, MSDN libraries and SP2 a new Windows 2003 server (chose mixed mode authentication). Installation was successful and I then installed an off the shelf database with Windows authentication which also installed successfully.
I created a new group in AD, added the database users into the group and gave db-owner rights to the group in SQL as advised by the installation guide. However, when I try to open the database it gives an error message saying "Cannot open database.[DBNETLIB][ConnectionOpen(Connect()).] SQL server does not exist or access denied". I also tested it adding an individual user (myself) as a user to no avail.
When I set up DSN in ODBC on my computer I can successfully test the connection but can't run the application. The connection is via TCP/IP.
Any suggestions?
View 7 Replies
View Related
Mar 2, 2007
I installed the SQL SERVER , Oracle
client on my computer, and I can connect to remote SQL server,oracle databases using wizards , however when I try to run application iam getting this error.
Server Error in '/shiva/datagrd' Application.
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or
access denied. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL
Server does not exist or access denied.Source Error:
Line 40: //SqlDataAdapter da=new SqlDataAdapter("select * from sms",con);Line 41: DataSet ds=new DataSet();Line 42: da.Fill(ds,"tab");Line 43: DataGrid1.DataSource=ds.Tables[0].DefaultView;Line 44: DataGrid1.DataBind();Source
File: e:shivadatagrdwebform1.aspx.cs Line: 42 Stack
Trace:
[OleDbException (0x80004005): [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.] System.Data.OleDb.OleDbConnection.ProcessResults(Int32 hr) System.Data.OleDb.OleDbConnection.InitializeProvider() System.Data.OleDb.OleDbConnection.Open() System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) datagrd.WebForm1.Page_Load(Object sender, EventArgs e) in e:shivadatagrdwebform1.aspx.cs:42 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573;
ASP.NET Version:1.1.4322.573 please provide the solution.
View 12 Replies
View Related
Apr 15, 2005
hello,
I hope someone can help me with the problem I am having, I get the following error:
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I am trying to connect to my SQL
Server 2000 db via asp.net. The aspx file uses a DataGrid, the aspx.vb
code behind file gets the connection string from the web.config file. I
tested my connection via ODBC, or SQL Query Analyzer just fine so I
know the userid/password is correct.
this is the snipplet code from the aspx.vb code-behind file:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim dbConn As OleDbConnection
Dim dCmd As OleDbCommand
Dim dReader As OleDbDataReader
Dim strConnection As String
Dim strSQL As String
If (Not Page.IsPostBack) Then
Try
'get the connection string from web.config and open a connection
'to the database
strConnection = ConfigurationSettings.AppSettings("dbConnectionString")
dbConn = New OleDb.OleDbConnection(strConnection)
dbConn.Open()
'build the query string and get the data from the database
strSQL = "SELECT Title, ISBN, Publisher " & _
"FROM Book " & _
"ORDER BY Title"
dCmd = New OleDbCommand(strSQL, dbConn)
dReader = dCmd.ExecuteReader()
'set the source of the data for the datagrid control and bind it
dgQuick.DataSource = dReader
dgQuick.DataBind()
Finally
'cleanup
If (Not IsNothing(dReader)) Then
dReader.Close()
End If
If (Not IsNothing(dbConn)) Then
dbConn.Close()
End If
End Try
End If
End Sub 'Page_Load
End Class
this is the connection string inside the web.config file:
<!--add key="dbConnectionString"
value="Provider=SQLOLEDB;Data Source=localhost;Initial
Catalog=myDBName;UID=myUserID;PWD=myUserPssd" /-->
<!--add
key="sqlConnectionString" value="Data Source=localhost;Initial
Catalog=myDBName;UID=myUserID;PWD=myUserPssd;persist security
info=False;" /-->
thanks,
arlena
View 1 Replies
View Related
Aug 8, 2005
Hi have created an application in asp.net to connect to a sql database. The reason why I am sooooo very confused is because the connection to the database works if i keep the project on my local machine and connect to the database on the server, but as soon as I upload the project to the server, I get the following error when I try to connect to the database: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access deniedCan anyone tell me why this is happenning? - PLEASE - Any help will be appreciatedThanks, Danielle
View 1 Replies
View Related
May 27, 2006
ok im a CS student, installed visual studio .net, and im trying to connect to a ms sql database (Northwind), but I keep getting a error that "[DBNETLIB][ConnectionOpen(Connect()).] SQL Server does not exist or access denied" in visual studio whenever I try creating a new database connection. How do I know if SQL server is installed on my system? cuz in my systray I see SQL server service manager, is that the same thing as SQL server? or do I need to download the full version or something? also could it be that a certain port on my system is not open that SQL server requires to be open?
Thanks
Ron
View 1 Replies
View Related
Apr 5, 2006
Hi all.
I'm running a large data transaction and get the next error :
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
In this case, I process over many, many records, and then it finally indicated the server doesn't exist. This only occurs sometime.
I have SQLServer 2000 on Windows 2003 Server
Some idea how to solve this.
Thanks advanced
Wil.
View 6 Replies
View Related
Aug 17, 2007
hi all,
this is punya,
and i am having a problem which was encountered by youin the past. My actual proble is " I am having vs.net 2005 along with MS SQL Server 2000 (Server1) in my system. The MS SQL Server is database server for some of my collegues. Whenever i want to connect to my Server1 DBServer it is givng the following error message."
"[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied"
and the other guys are able to connect to the same DBServer. and one thing i am able to connect to other DBServers which are in Lan..
please Help me.
View 1 Replies
View Related
Oct 15, 2007
Hi frens
one of my site with the Databse workd fine while the other with the same database shows the following error:
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
/Connection.asp, line 6
View 3 Replies
View Related
Dec 6, 2006
Hi Folks,
Lets get this out of the way first - I KNOW NOTHING ABOUT SQL SERVER, MSDE or MDAC
Sorry I don't mean to shout but I really don't know anything at all so please make your answers as simple as possible.
I have an application (Webmarshall) that has a SQL database from which certain reports are run. Whenever I try to run the reports it asks me for database details.
According to the application it is using LANCELOTWEBMARSHALLWebmarshall as the database
As this is all happening on one server, I presume it is local and not remote.
When I am presented with the dialogue box for the reporting module it asks for a server and a database, I have tried the following :
Server: local Auth: Windows
Server: local Auth: SQL
Server lancelot (both authorisation methods)
Server: lancelotwebmarshall (both authorisation methods)
Server: \lancelotwebmarshall (both authorisation methods)
Each time, I get the message
[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied
and I can't select a database.
Can someone help me please...its a long time since I went fishing in the dark (with no net) but thats how I feel right now!!!!
Thanks
View 3 Replies
View Related
Jun 2, 2008
Hi,
i have SQL 2005 Server installed on my Win XP with sp2 laptop
when i try to connect one database on this laptop from another laptop which also in Win XP with SP2, it gives me the error messages as below
"Test connection failed because of an error in initializing provider. [DBNETLIP][Connectionopen (Connect ()).] SQL Server does not exist or access denied"
both the laptops are in workgroup and i can ping each other too
please tell me what exactly the issue
regards
binu
View 6 Replies
View Related
Jun 3, 2008
--------------------------------------------------------------------------------
Hi,
i have SQL 2005 Server installed on my Win XP with sp2 laptop
when i try to connect one database on this laptop from another laptop which also in Win XP with SP2, it gives me the error messages as below
"Test connection failed because of an error in initializing provider. [DBNETLIP][Connectionopen (Connect ()).] SQL Server does not exist or access denied"
both the laptops are in workgroup and i can ping each other too
please tell me what exactly the issue
regards
binu
View 2 Replies
View Related
Jul 20, 2006
Okay Ive managed to confuse myself pretty good.I have an aspx page that attempts to connect to an SQLEXPRESS instance and add data to a table.Code as follows:beginning of page<%@ page aspcompat=true enablesessionstate=false language=javascript %><!--#include file="adojavas.inc"--><%@ Import Namespace="System.Data.OleDb" %>I have a toolfunction that when called upon runs this:if (xco >= -180 && xco <= 180 && yco >= -90 && yco <= 90) { status = "Can't connect to database."; // create connection to database var connection; connection = Server.CreateObject("ADODB.Connection"); connection.Open("Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=OutdoorsExp;Data Source=\.pipeMSSQL$SQLEXPRESSsqlquery;"); status = "Can't access table."; // create recordset var recordset; recordset = Server.CreateObject("ADODB.Recordset"); recordset.Open("dbo.FishType", connection, adOpenDynamic); status = "Can't append new record, record set does not support AddNew."; // append record for clicked location if (recordset.Supports(0x01000400)) { status = "Can't append new record."; recordset.AddNew(); recordset.Fields("LongitudeI").Value = xco; recordset.Fields("LatitudeI").Value = yco; recordset.Update(); } recordset.Close(); // release the file connection.Close(); status = "Can't propagate changes to drawing."; // refresh drawing var document = mapserver.Document; var componentIndex = document.ComponentSet.ItemByName("FishTable Data Points Drawing"); if (componentIndex >= 0) { document.ComponentSet.Item(componentIndex).Refresh(); } status = xco.toString() + ", " + yco.toString(); }Unfortunately this gives me an error instead of transferring the value xco,yco to the SQL Tables LatitudeI/LongitudeI column.Ive tried many different connections strings, and have played myself into a state of confusion now :(.I get this error:[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.[COMException (0x80004005): [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.]Ive tried named pipes and using IP to connect, and Im not 100% sure how to use SQL Server via
"System.Data / System.Data.SqlClient".Any insights would be greatly welcomed!
View 3 Replies
View Related
Jul 25, 2005
I am trying to link SQL SE 2000 (Local server at head office) to MSDE 2000 (remote server). After creating the server group in local server, I try to register SQL server Computers (MSDE 2000) to place in it.
But I received this error message.
"SQL server registration failed because of the connect failure displayed below. Do you wish to Register anyway
SQL Server does not exist or access denied connectionOpen(Connect()).'"
I checked the setup for client and server utilities.
Client Utility is TCP/IP
Server Utility is Named pipe
Please, help me. I don't know what went wrong here.
View 9 Replies
View Related
Aug 24, 2006
The server that needs to be moved: SERVER A.
The databases which need to be moved (present in SERVER A): DB-A, DB-B.
The SERVER A machine is in X domain
The target machines: Could be any of SERVER T1
This machine is in Y domain.
While we are trying to create a new server instance of the Server A in SERVER T1, we are getting an error message as shown below:
Reason: SQL server does not exist or access denied. (ConnectionOpen (Connect())
The server that needs to be moved SERVER A could not be mapped to SERVERT1.
Problem: The tables concerned present in the SERVER A and the production server are same. These could be extracted to SERVERT1 using the SQL Enterprise Manager utility.
Views and Stored Procedures concerned are only present in SERVER A. Problem lies in copying them. Manually doing so could pose great risks.
What is the plausible work around for this?
View 2 Replies
View Related
Nov 26, 2005
Server Does Not Exist or Access Denied ConnectionOpen[Connect]
View 4 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Jan 29, 2007
I have this problem occuring intermittently:When I try to add a package to the project, and click on the Packagepath button. I get a oledb error x080004005 (client unable toestablish connection)...After I click ok, and click on the Package path again 2 or 3 times,the error goes away and I get the list of packages displayed. Sometime I get an empty list box.Similar to this happens when I execute a package also. When I executeit 2nd or 3 rd time it works fine. The error happens only when I amtrying to connect to the serverdatabase. Once it is in the databaseI do not get any error message.This is what I have:I have sql 2005 installed.Microsoft SQL Server ManagementStudio9.00.1399.00Microsoft Analysis Services ClientTools2005.090.1399.00Microsoft Data Access Components(MDAC)2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)Thank you in advance!!!
View 2 Replies
View Related
Jan 25, 2007
I have this problem occuring intermittently:
When I try to add a package to the project, and click on the Package path button. I get a oledb error x080004005 (client unable to establish connection)...
After I click ok, and click on the Package path again 2 or 3 times, the error goes away and I get the list of packages displayed. Some time I get an empty list box.
Similar to this happens when I execute a package also. When I execute it 2nd or 3 rd time it works fine. The error happens only when I am trying to connect to the serverdatabase. Once it is in the database I do not get any error message.
This is what I have:
I have sql 2005 installed.
Microsoft SQL Server Management Studio 9.00.1399.00
Microsoft Analysis Services Client Tools 2005.090.1399.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Thank you in advance!!!
View 6 Replies
View Related
Mar 18, 2004
Hi All,
I have a problem with a specific query which causes the error below. It runs fine on the server but refuses to work on my Query Analyzer.
select a.cola
from tablea a
where a.cola not in (select b.cola from tableb b)
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (WrapperRead()).
Server: Msg 11, Level 16, State 1, Line 0
General network error. Check your network documentation.
Connection Broken
I have MDAC 2.8 installed. SQL Server 2000. There are no entries in the logs, no backups running or deadlocks detected. My Collegues machine runs it fine?
Any Ideas please? All help gratefully received...
Thanks,
Jim
View 4 Replies
View Related
Nov 17, 2007
Hello,
Once in a while we receive this error from a script task in an SSIS package that runs from a scheduled job:
Unable to receive files using "FTPConnMngr".
A search on google yielded nothing. Has anyone encountered this error, and/or what are some possible causes?
Thank you
View 3 Replies
View Related
Jan 16, 2006
Hi All,
I'm developing Pocket Pc application, In that i have set of statement, which establishes connection with sql Server 2000 Database. When ever I try to open SqlConnection, I€™m getting error "Can't find PInvoke DLL 'dbnetlib.dll'.". Right now i am working in .Net Compact Framework 2.0 , But previously i worked in .Net CF 1.1 i didn€™t face problem while doing that. Can any one help me to solve this issue?
My code exactly look like :
Private SqlCmd As New SqlCommand
Private SqlTrans As SqlTransaction
Private SqlConn As SqlClient.SqlConnection
Private SqlCmdBuilder As SqlCommandBuilder
Private SqlDataAdapter As SqlDataAdapter
Public Function Select_DocumentTemplate() As DataSetDocumentTemplate
Dim DocuMentTemplateDs As New DataSetDocumentTemplate
Try
SqlConn = New SqlConnection("Data Source=SERVERNAME;Initial Catalog=DATABASENAME;Persist Security Info=True;User ID=sa")
If SqlConn.State = ConnectionState.Closed Then
SqlConn.Open()
End If
SqlCmd = New SqlCommand
SqlCmd.CommandType = CommandType.StoredProcedure
SqlCmd.CommandText = New StringBuilder(500).Append("Select_documentTemplateDetails").ToString()
SqlCmd.Connection = SqlConn
SqlDataAdapter = New SqlDataAdapter(SqlCmd)
SqlCmdBuilder = New SqlCommandBuilder(SqlDataAdapter)
SqlDataAdapter.Fill(DocuMentTemplateDs.Ncm_DocumentTemplate)
Return DocuMentTemplateDs
Catch ex As Exception
Throw ex
Finally
SqlConn.Close()
End Try
End Function
' When Ever I try to call above method to retrive data from Db , It's giving Missingmethod Exception and error message will be "Can't find PInvoke DLL 'dbnetlib.dll'."
Thanks ,
Jayakumar.A
View 36 Replies
View Related
Mar 12, 2007
I have a friend at another company that is getting this error:
03/07/2007 16:03:49 Version 21.00.69 - UID - xxx - Error -2147467259 - [DBNETLIB][ConnectionWrite (send()).]General network error. Check your network documentation.
I have checked around and found two potential fixes for this problem. The first one describes this as a problem specific to the Named Pipes protocol. The fix is listed as available from this site:
http://support.microsoft.com/default.aspx?scid=kb;en-us;827452
The second fix is listed as making an additional entry to the registry like this:
The problem arises on a busy SQL system and some requests will randomly seem
to be dropped with a General Network Error.
To fix:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServic esTcpipParameters
Add a new DWORD key SynAttackProtect with value of 0. Restart server.
Can someone tell me if either or both of these approaches is correct?
View 3 Replies
View Related
Sep 27, 2007
I'm getting an intermittent error 'DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER' when attempting to connect to an Access mdb. We have a weekly package that fails almost every other week. The package uses a FileSystem task to copy an Access mdb which we use as a template. It has a single table structure which is empty. The FileSystem copy task creates the 'clone' in a different folder with a new file name. The new file name has the current date embedded in it. The next task is a DataFlow task which fills the single Access table with data. It uses an OLE_DB connection to the Access mdb. Since the destination mdb is created at runtime in the FileSystem task, I have set the DelayValidation = True for the DataFlow task. The package is called from a 'master' package via an Execute Package Task. The master package is launched from a web application. Interestingly, when I use the 'restart from checkpoint' feature it restarts the package at the DataFlow task and runs it successfully. I have used the 'restart from checkpoint' after each failure and it has always worked. When I try to isolate the problem in a test package I am unable to reproduce the error. Our SqlServer version is Enterprise Edition (64-bit) with SP2.
Anyone have a similar experience? Thanks in advance.
View 6 Replies
View Related
Mar 5, 2007
have done several SQL_CLR stored procs.
on one of them, get an intermittent error
Msg 6532, Level 16, State 49, Procedure clrsp_RetailPriceOnDate, Line 0
.NET Framework execution was aborted by escalation policy because of out of memory.
System.Threading.ThreadAbortException: Thread was being aborted.
System.Threading.ThreadAbortException:
at Data_SQLCLR.StoredProcedures.clrsp_RetailPriceOnDate(SqlInt32 iSQLsysid_Individual, SqlInt32 iSQLStore, SqlInt32 iSQLGroup, DateTime dtPriceDate, SqlInt32 iSQLInclude)
Msg 6532, Level 16, State 49, Procedure clrsp_RetailPriceOnDate, Line 0
.NET Framework execution was aborted by escalation policy because of out of memory.
Problem is that it is intermittent - runs fine several times(takes c 30 secs to run, returns 15k records), then fails, then runs ok, fails/runs/runs/fails etc... etc...
any ideas on how to track / catch this one
thx
View 3 Replies
View Related
Apr 3, 2008
Hi All,
I have application desinged using VB.Net and sql server 2005. Its been deployed at remote site which is connected to my database server using VPN.
There are 2 machine at the remote site. One machine is working perfectly with all the reports and forms working. second machine is having problem runing one report. Reports is based on View which around 8 tables joined.
It shows the following eror
failed to openrowset
Microsoft OLD DB provider for sql server
DBNETLIB connectionread(recv()). General Network Error. Check your network doucmentation.
View 3 Replies
View Related
Nov 26, 2006
We have a SQL 2005
clustered server (Microsoft Cluster Services) that is queried from 4 IIS6
Windows Server 2003 frontends. Each frontend runs both classic ASP apps
connection with SQL Server ODBC and .NET2 apps connecting with
System.Data.SqlClient. Ocassionaly we get a string of errors/timeouts opening a
connection lasting maybe 2 minutes.
One the classic ASP
apps we log one of these two errors:
Microsoft OLE DB Provider for ODBC
Drivers (0x80004005)
[Microsoft][ODBC SQL Server
Driver][DBNETLIB]General network error. Check your network
documentation
or
Microsoft OLE DB Provider for
ODBC Drivers (0x80004005)
[Microsoft][ODBC SQL Server
Driver]Timeout expired
on the
ADODB.Connection.Open
On the .NET2 apps we
log
Message Timeout expired. The timeout
period elapsed prior to completion of the operation or the server is not
responding.
StackTrace at
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection
owningObject)
at
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection
owningConnection)
at
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory)
at
System.Data.SqlClient.SqlConnection.Open()
at
System.Web.SessionState.SqlSessionStateStore.SqlStateConnection..ctor(SqlPartitionInfo
sqlPartitionInfo)
Source .Net SqlClient Data Provider
Any ideas for further debugging?
View 11 Replies
View Related
Sep 12, 2007
Hi,
I'm in the process of writing a fairly complex SSIS package that reads csv files and goes on to load the content into a SQL Server 2005 database.
I am testing the package by executing it from within a Nant script. My test process resets the data in the target database and then loads data from a known set of test data files. Because it's scripted I can be sure that SSIS is being asked to do the same thing, every time in a consistent way.
When I execute the package I frequently (although not always) get an error message dialog mid-ececution that reads:
Code Snippet
Microsoft Visual c++ Runtime Library
Runtime error!
Program: C...
The application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
When I click OK the VS Just-In-Time debugger tells me about an unhandled win32 exception in DTExec.exe [4696] and asks me if I wish to debug (which I do not).
No error is reported by SSIS itself, it literally just stops in its tracks.
I will appreciate any help that can be offered here
Nick
View 5 Replies
View Related
Sep 20, 2007
Hi,
in our environment
- Windows XP
- SQL Server Express 2005
- Internet connection via TCP/IP protocol
The described network error occurs, when we unplug the network cable:
[DBNETLIB][ConnectionWrite (send()).] General network error.
The affected database resides on the locally installed SQLExpress, it doesn't use any network connections. The error doesn't occur immediately, in most cases there are up to 30 seconds where data can be (correctly!) written to the recordset, but after that timeout the connetion is broken.
We already tried out the described workarounds:
- disable named pipes protocol
- set SynAttackProtect=0 in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
The error doesn't occur with MSDE (SQL 2000) or under Vista.
Thanks for help!
Mathias
View 5 Replies
View Related
Jul 9, 2006
I am unable to connect to SQL Server, instead I get
Sql Server ErrorL 18
Handshake error as above
A connection was successfully established with the server, but then an error occurred during the pre-login handshake (provider: SSL Provider, error: 0- The token supplied to the function is invalid) (Microsoft SQL Server)
Any ideas?
View 4 Replies
View Related
Oct 1, 2006
I have an IPAQ 2795 and installed a program that emulates Enterprise
Manager on a Windows Mobile Device called SEM v1.01 from
Trianglepowers.com
http://www.trianglepowers.com/ppc6700/Default.aspx
I have installed the latest Net Compact Framework and service patches / updates
I have installed MS SQL Mobile Edition
I have installed Client CAB
But I still get this error when I try to run the program.
Can anyone suggest a solution?
Thanks
View 4 Replies
View Related
Jul 20, 2005
Help,I am running a pass through query to oracle from SQL server 2000 asfollows;select * from openquery(nbsp, 'select * from FND_FLEX_VALUES')I have run this query through both DTS and the query analyzer and getthe foloowing error;Server: Msg 7357, Level 16, State 2, Line 3Could not process object 'select * from FND_FLEX_VALUES'. The OLE DBprovider 'MSDASQL' indicates that the object has no columns.OLE DB error trace [Non-interface error: OLE DB provider unable toprocess object, since the object has no columnsProviderName='MSDASQL',Query=select * from FND_FLEX_VALUES'].The really strange thing is, I'll get this error the first time Iexecute the query but if I execute it immeadiatley after it will runfine.Any help would be most appreciated!Cheers
View 1 Replies
View Related
Jul 21, 2006
Hi,
We are experiencing intermittent authentication errors "Error: 18456, Severity: 14, State: 10" on a customer's production server. This is a new server that has just been rolled out in the past several months. Rebooting the server appears to make the problem go away. We are using SQL authentication from a separate server that is running IIS. The application always uses the same username and password to connect.
Server info:
select @@version
Microsoft SQL Server 2005 - 9.00.2047.00 (X64)
Apr 14 2006 01:11:53
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
select @@version
SP1
Sample error from SQL Server errorlog:
Date 7/7/2006 10:53:24 AM
Log SQL Server (Archive #2 - 7/7/2006 12:20:00 PM)
Source Logon
Message
Error: 18456, Severity: 14, State: 10.
MSDN (http://msdn2.microsoft.com/en-us/library/ms366351.aspx) lists various states for this error message but 10 is not included, and it says "Other error states exist and signify an unexpected internal processing error."
Note: This was not a case of a transient error that occurs only when SQL Server is starting up - these errors occurred at a variety of times, two months after the server was last rebooted / SQL Server last restarted.
Thanks for any help you can provide.
Regards,
-Frank.
View 26 Replies
View Related
