I am hoping somebody can help with this. I have searched other posts and it seems like my problem should have been fixed with the hotfix but it wasn't. I am using SQL Express (SQL Server 9.0.3161) and have been using this database for quite some time and have never experienced this problem till yesterday. I am getting the error message "Internal Query Process Error: The query processor could not produce a query plan." This error appears when trying to add a new record to a table either when using a form through a MS Access front-end or when entering data directly into a table using MS SQL Server Managemnet Studio Express. It happens on different tables but not all tables. If I run a INSERT INTO query I can add data to the table. At the same time this has happened, when I run some of my stored procedures I get the same error.
This morning I installed the Cumulative Update Package (build3161) for SQL Server Service Pack 2, KB# 935356 and it didn't make any differance. I have attached the database to another SQL server (9.0.3042) and it did the same thing. This leads me to believe that the problem may be in the database itself. But I can't for the life of me figure out where to start as the database was working fine when used the day before and no changes had been made to the structure of it recently. Can anybody tell me what I should be looking for or where the problem might be?
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hi,I am trying to execute rather complex query, and I got query processorerror. I read the Microsoft support page and it said I should install SP4,and I did, but the error is still there.I am running MSDE with SP4 installed. Everything else works like a charm.Zvonko
Ok, I'm getting an issue with SQL Server and I'm at a bit of a loss to understand why it's happening.
Situation: We have an existing database, and we're running a migration script over it to bring it up to a new version.
We get partway through the script when we get the error: Internal Query Processor Error: The query processor ran out of stack space during query optimization.
I've searched around the web and it seems that people get this when they do silly things like have 300 Foreign Keys, or 17 pages of where clauses, or something else rediculous to hit the boundary conditions of SQL Server.
this is what i've gathered so far about our situation, using SQL Server 2000 SP4 1. I've recreated/changed a clustered index using the drop_existing clause /****** Object: Index [IX_BM_SYNCHRONIZATION_1] Script Date: 08/28/2007 18:42:11 ******/ CREATE CLUSTERED INDEX [IX_BLAH ON [dbo].[TABLE_BLAH] ( [VECTORID] ASC, [TRANSID] ASC, [ORDERID] ASC ) WITH DROP_EXISTING GO
2. later on the script, we attempt to delete from this table with a query that doesn't use this index eg DELETE FROM TABLE_BLAH WHERE PRODUCT_NAME = 'blah'
and we get the error: Internal Query Processor Error: The query processor ran out of stack space during query optimization.
We're running this through osql.exe and not using any transactions
likewise, there is another section where it tries to insert into this table and it gets the same error.
Does anyone have an idea of what we could be running into here - the table only has 3 indexes on it, has only 18 columns (of which one is a 'text' column) and the particular datbase we're running this on is tiny.
Application folks experiencing recurrence of problem previously reported. This is causing delays with multiple projects. Errors below are occuring when attempting to run a DTS package that will refresh data from prod to pilot.
Exception Details: System.Data.SqlClient.SqlException: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.
Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Another example reads: Step Error Source: Microsoft Data Transformation Services (DTS) Package Step Error Description:The task reported failure on execution. (Microsoft OLE DB Provider for SQL Server (80004005): Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.) Step Error code: 8004043B Step Error Help Fileqldts80.hlp Step Error Help Context ID:1100
I have a SProc that runs across many clients without any problems. Every now and then, though, I get the following error:
Internal Query Processor Error: The query processor encountered an unexpected error during execution. [SQLSTATE 42000] (Error 8630).
All I am doing is populating Temp tables with some data and then joining them together to create a Global Temp table that is being BCP'd to a network share.
Has anyone come across this error in SQL Server 2005? I cannot find anything on Google or Microcsoft.
Has anyone come across error 8630 "Internal Query Processor Error: The query processor encountered an unexpected error during execution." with SQL Server 7 with SP4 installed?
There are microsoft articles on the error, but the errors are suposidly fixed in SQL Server 7 SP2 and SP3.
We are selecting from one view left outer joined with another, but no unions are involved.
This is not a problem in SQL Server 2000, but unfortunatlely Microsoft are supporting SQL Server 7 until 2005 and so we have to do the same...
I have MS SQL Express installed on my local machine and I have problems runnig some unit tests. Precisely, an exception is thrown as follows:
System.Data.SqlClient.SqlException : The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Nevertheless, everythin is ok on the server, where MS SQL Developer Edition is installed.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
and we get the error: Msg 8624, Level 16, State 1, Line 1
Internal SQL Server error.
When we run the same condition but with select instead of delete, every thing works fine, we only have pb with delete.
How can we detect what the problem is. Because with Internal error Msg 8624 does not tell us any thing, what re we supposed to make the query works especially that it runs correctly in select mode.
I've read already every thread in this forum regarding this topic with no results.
SQLServer and the corresponding services are at actual update level. The reporting services worked for 4 months without this problem. Suddenly, most of the time all reports return an internal error (it is like 70-30 for internal error) not depending which render format is used.
The system logs (eventlog, iis) show no errors. The ExecutionLog of RS show rsInternalError.
Looking in the log files in RS log directory, there is following stacktrace:
Hi, When I am trying to execute a delete query i'm getting the following error An internal error occurred. [ ID = 3639 ]. This is happening for some specific rows only. Other rows are getting deleted without any issues. Some 7 rows are there which i'm not able to delete. I am able to run update query on that rows. but not delete query Pls help Thanks Nebu
We've got a strange problem. We are running on SQL 2000 SP4. Our structure uses database pairs, we have a Current and a History database so old records that don't change and aren't needed very often are only loaded into memory when needed.
The following query (the names have been changed) deletes the quote from the current database when the order raised from the quote has been moved into the history.
Code Snippet DELETE FROM t_CurrentUnpaid FROM db_Mule_History.dbo.t_History INNER JOIN t_Quote ON db_Mule_History.dbo.t_History.uid = t_Quote.uid INNER JOIN t_CurrentUnpaid ON t_Quote.uid_Parent = t_CurrentUnpaid.uid where t_CurrentUnpaid.uid_cont != -2
This query runs fine on 4 identical database pairs, on the 5th pair it fails. All these pairs are on the same server, with the same permissions and the exact same structure. Only the data would differ
The error returned is: Internal server error 8624 level 16 state 1 line 1
We have looked at MS articles, but all that I can find are about bugs fixed in SP1, 2, 3 and 4. Nothing post SP4 that we are running.
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access. I have looked where the error logs should be, but there are no error logs. I rebuilt the query as I needed to change this, but this did not help. Is there someone who could point me in the correct direction.
I received the following error today while migrating some code from SQL 2000 standard to SQL 2005 standard:
The query processor ran out of stack space during query optimization. Please simplify the query.
From what I gather, this error is usually an indication that one of the SQL Server 2005 maximum capacity specifications has been exceeded. However, I'm not sure which one. The only one that seems suspect is the number of nested subqueries (32), however I believe the numerous subqueries in my query would be classified as correlated rather than nested.
An example of my code is below. It is necessarily messy, as the output needs to be denormalized somewhat. Note that this runs just fine on SQL 2000, and it retrieves the 1500 or so rows of data in about 30 seconds. Thanks in advance for any ideas as to what may be causing this error. (Sorry for not using code-block, but all the html tags it threw in were exceeding the 50,000 character limit for the message)
BEGIN
SELECT
(SELECT Agent FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 1) AS A5,
(SELECT Agent FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 2) AS A6,
(SELECT Agent FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 3) AS A7,
(SELECT Agent FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 4) AS A8,
dbo.f_formatpseudodate(Accrued_Interest_To) AS AI,
dbo.f_getmiscdescription('AM', c.Card_Number, Amended) AS AM,
Basis_Shareblock_1 AS B1,
Basis_Shareblock_2 AS B2,
Basis_Shareblock_3 AS B3,
Basis_Shareblock_4 AS B4,
Basis AS BS,
dbo.f_getmiscdescription('C1', c.Card_Number, Price_Code_1) AS C1,
dbo.f_getmiscdescription('C2', c.Card_Number, Price_Code_2) AS C2,
dbo.f_getmiscdescription('C3', c.Card_Number, Price_Code_3) AS C3,
dbo.f_getmiscdescription('C4', c.Card_Number, Price_Code_4) AS C4,
dbo.f_getmiscdescription('C5', c.Card_Number, Price_Code_5) AS C5,
dbo.f_getmiscdescription('C6', c.Card_Number, Price_Code_6) AS C6,
CAST(Card_Date AS smalldatetime) AS CD,
c.Card_Number AS CN,
dbo.f_getisocurrencycode(Currency_Code) AS CR,
Card_Status AS CS,
dbo.f_formatpseudodate(Record_Date) AS CT,
Currency_Description AS CU,
(SELECT New_Issue_Description FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 1) AS D1,
(SELECT New_Issue_Description FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 2) AS D2,
(SELECT New_Issue_Description FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 3) AS D3,
(SELECT New_Issue_Description FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 4) AS D4,
(SELECT New_Issue_Description FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 5) AS D5,
(SELECT New_Issue_Description FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 6) AS D6,
dbo.f_formatboolean(Dutch_Auction) AS DA,
dbo.f_formatpseudodate(Dated_Date) AS DD,
dbo.f_getmiscdescription('DI', c.Card_Number, Distribution_In) AS DI,
Dealer_Manager_2 AS DL,
Dealer_Manager_1 AS DM,
dbo.f_getmiscdescription('DV', c.Card_Number, Dividend_In) AS DV,
Basis_Surrender_1 AS E1,
Basis_Receive_1_1 AS E2,
Basis_Amount_1_1 AS E3,
Basis_CUSIP_1_1 AS E4,
Basis_Receive_1_2 AS E5,
Basis_Amount_1_2 AS E6,
Basis_CUSIP_1_2 AS E7,
Basis_Receive_1_3 AS E8,
Basis_Amount_1_3 AS E9,
dbo.f_getmiscdescription('EC', c.Card_Number, Record_Date_Code) AS EC,
Equity_Debt AS ED,
dbo.f_getmiscdescription('EF', c.Card_Number, Effective_Date_Code) AS EF,
dbo.f_getmiscdescription('EX', c.Card_Number, Expiration_Date_Code) AS EX,
dbo.f_getmiscdescription('F1', c.Card_Number, Refer_Code_1) AS F1,
dbo.f_getmiscdescription('F2', c.Card_Number, Refer_Code_2) AS F2,
dbo.f_getmiscdescription('F3', c.Card_Number, Refer_Code_3) AS F3,
dbo.f_formatpseudodate(Effective_Date) AS FD,
File_Activity_Type AS FT,
dbo.f_getmiscdescription('G1', c.Card_Number, Rights_Ratio_1) AS G1,
dbo.f_getmiscdescription('G2', c.Card_Number, Rights_Ratio_2) AS G2,
dbo.f_getmiscdescription('G3', c.Card_Number, Rights_Ratio_3) AS G3,
RTRIM(LTRIM(Original_Card_Number)) AS GC,
dbo.f_getmiscdescription('GD', c.Card_Number, Ex_Rights_Date_Code) AS GD,
dbo.f_getmiscdescription('GT', c.Card_Number, Rights_To) AS GT,
Basis_Amount_2_3 AS H1,
Basis_CUSIP_2_3 AS H2,
Basis_Surrender_3 AS H3,
Basis_Receive_3_1 AS H4,
Basis_Amount_3_1 AS H5,
Basis_CUSIP_3_1 AS H6,
Basis_Receive_3_2 AS H7,
Basis_Amount_3_2 AS H8,
Basis_CUSIP_3_2 AS H9,
Information_Agent_1 AS I1,
Information_Agent_2 AS I2,
Interest_Rate AS [IN],
dbo.f_getmiscdescription('J1', c.Card_Number, Subscription_Ratio_Code_1) AS J1,
dbo.f_getmiscdescription('J2', c.Card_Number, Subscription_Ratio_Code_2) AS J2,
dbo.f_getmiscdescription('J3', c.Card_Number, Subscription_Ratio_Code_3) AS J3,
Basis_CUSIP_4_2 AS K1,
Basis_Receive_4_3 AS K2,
Basis_Amount_4_3 AS K3,
Basis_CUSIP_4_3 AS K4,
Basis_Receive_3_3 AS L1,
Basis_Amount_3_3 AS L2,
Basis_CUSIP_3_3 AS L3,
Basis_Surrender_4 AS L4,
Basis_Receive_4_1 AS L5,
Basis_Amount_4_1 AS L6,
Basis_CUSIP_4_1 AS L7,
Basis_Receive_4_2 AS L8,
Basis_Amount_4_2 AS L9,
dbo.f_formatpseudodate(Withdrawal_After) AS LA,
dbo.f_getmiscdescription('LC', c.Card_Number, Withdrawal_After_Code) AS LC,
dbo.f_getmiscdescription('LG', c.Card_Number, Eligibility) AS LG,
Withdrawal_After_Time AS LT,
dbo.f_getmiscdescription('LZ', c.Card_Number, Withdrawal_After_Zone) AS LZ,
Option_Expiration_Time AS M1,
Rights_Expire_Time AS M3,
Expiration_Date_Time AS M4,
dbo.f_formatpseudodate(Maturity_Date) AS MD,
Maximum_Eligibility AS ME,
dbo.f_validatecardnumber(Refer_Card_1) AS N1,
dbo.f_validatecardnumber(Refer_Card_2) AS N2,
dbo.f_validatecardnumber(Refer_Card_3) AS N3,
dbo.f_getmiscdescription('NT', c.Card_Number, Interest_Rate_Code) AS NT,
DTC_Match_Card_Number AS O3,
Offer_By AS OB,
Odd_Lot AS OD,
dbo.f_getmiscdescription('OV', c.Card_Number, OverSubscription) AS OV,
dbo.f_formatpseudodate(Option_Expiration_Date) AS OX,
(SELECT Agent_Telephone FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 4) AS P1,
Information_Agent_Telephone_1 AS P2,
Information_Agent_Telephone_2 AS P3,
Dealer_Manager_Telephone_1 AS P4,
Dealer_Manager_Telephone_2 AS P5,
CUSIP_Number AS PN,
dbo.f_formatpseudodate(Pro_Ration_Date) AS PO,
dbo.f_getmiscdescription('PY', c.Card_Number, Payable_To) AS PY,
dbo.f_getmiscdescription('PZ', c.Card_Number, Protect_Period) AS PZ,
Price_1 AS R1,
Price_2 AS R2,
Price_3 AS R3,
Price_4 AS R4,
Price_5 AS R5,
Price_6 AS R6,
dbo.f_getmiscdescription('RB', c.Card_Number, Rights_Transferable) AS RB,
Rights_CUSIP AS RC,
Issuer_Description AS RD,
dbo.f_getmiscdescription('RI', c.Card_Number, Pro_Ration_Date_Code) AS RI,
Record_Type AS RT,
dbo.f_formatpseudodate(Rights_Expire_Date) AS RX,
CAST(Subscription_Ratio_1 AS varchar(12)) + Subscription_Ratio_1_Unit AS S1,
CAST(Subscription_Ratio_2 AS varchar(12)) + Subscription_Ratio_2_Unit AS S2,
CAST(Subscription_Ratio_3 AS varchar(12)) + Subscription_Ratio_3_Unit AS S3,
dbo.f_getmiscdescription('SC', c.Card_Number, Source_Name) AS SC,
Service_Type AS SE,
dbo.f_getmiscdescription('ST', c.Card_Number, Subscription_To) AS ST,
(SELECT Redemption_Agent_Telephone FROM Redemption_Agent ra WHERE ra.Card_Number = c.Card_Number AND Redemption_Agent_Number = 1) AS T2,
(SELECT Redemption_Agent_Telephone FROM Redemption_Agent ra WHERE ra.Card_Number = c.Card_Number AND Redemption_Agent_Number = 2) AS T3,
(SELECT Redemption_Agent_Telephone FROM Redemption_Agent ra WHERE ra.Card_Number = c.Card_Number AND Redemption_Agent_Number = 3) AS T4,
(SELECT Redemption_Agent_Telephone FROM Redemption_Agent ra WHERE ra.Card_Number = c.Card_Number AND Redemption_Agent_Number = 4) AS T5,
(SELECT Agent_Telephone FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 1) AS T7,
(SELECT Agent_Telephone FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 2) AS T8,
(SELECT Agent_Telephone FROM Agent a WHERE a.Card_Number = c.Card_Number AND Agent_Number = 3) AS T9,
Tickler_Date AS TK,
dbo.f_getmiscdescription('TP', c.Card_Number, To_Purchase) AS TP,
dbo.f_getmiscdescription('TS', c.Card_Number, Transaction_Status) AS TS,
dbo.f_gettxtext(c.Card_Number) AS TX,
Basis_CUSIP_1_3 AS U1,
Basis_Surrender_2 AS U2,
Basis_Receive_2_1 AS U3,
Basis_Amount_2_1 AS U4,
Basis_CUSIP_2_1 AS U5,
Basis_Receive_2_2 AS U6,
Basis_Amount_2_2 AS U7,
Basis_CUSIP_2_2 AS U8,
Basis_Receive_2_3 AS U9,
RTRIM(Issue_Description) AS UD,
Voluntary_Mandatory AS VM,
(SELECT New_Issue_CUSIP FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 1) AS W1,
(SELECT New_Issue_CUSIP FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 2) AS W2,
(SELECT New_Issue_CUSIP FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 3) AS W3,
(SELECT New_Issue_CUSIP FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 4) AS W4,
(SELECT New_Issue_CUSIP FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 5) AS W5,
(SELECT New_Issue_CUSIP FROM New_Issue ni WHERE ni.Card_Number = c.Card_Number AND New_Issue_Number = 6) AS W6,
dbo.f_formatpseudodate(Withdrawal_Prior_To) AS WD,
Withdrawal_Prior_To_Time AS WH,
dbo.f_getmiscdescription('WO', c.Card_Number, Withdrawal_Prior_To_Code) AS WO,
dbo.f_getmiscdescription('WZ', c.Card_Number, Withdrawal_Prior_To_Zone) AS WZ,
(SELECT Payable_Rate_Amount FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =3) AS X1,
(SELECT Payable_Rate_CUSIP FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number = 3) AS X2,
dbo.f_formatpseudodate(Expiration_Date) AS XD,
dbo.f_formatpseudodate(Ex_Rights_Date) AS XR,
dbo.f_getmiscdescription('XT', c.Card_Number, Rights_Expire_Code) AS XT,
Payable_Rate_Shareblock AS Y1,
Payable_Rate_Surrender AS Y2,
(SELECT Payable_Rate_Receive FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =1) AS Y3,
(SELECT Payable_Rate_Amount FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =1) AS Y4,
(SELECT Payable_Rate_CUSIP FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =1) AS Y5,
(SELECT Payable_Rate_Receive FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =2) AS Y6,
(SELECT Payable_Rate_Amount FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =2) AS Y7,
(SELECT Payable_Rate_CUSIP FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =2) AS Y8,
(SELECT Payable_Rate_Receive FROM Payable_Rate pr WHERE pr.Card_Number = c.Card_Number AND Payable_Rate_Number =3) AS Y9,
dbo.f_formatpseudodate(Payment_Date) AS YD,
dbo.f_getmiscdescription('YR', c.Card_Number, Payable_Rate) AS YR,
dbo.f_getmiscdescription('Z1', c.Card_Number, Option_Expiration_Zone) AS Z1,
Rights_Expire_Zone AS Z3,
Expiration_Date_Zone AS Z4
FROM COMMON c
INNER JOIN DC_DailyCard dc ON c.Card_Number = dc.Card_Number
WHERE c.Card_Status = 'R' AND c.Card_Date BETWEEN @start_date AND @end_date
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown. An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result. Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated. Thank You.
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer If reset offset = pagenumber - 1 End If Return pagenumber - offset End Function
Got this error running a query with ssms2014 on SqlServer2014 but db has Compatibiliy level 100 (sql2008)
no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.
ex table1.field1 possible values= 2,3 it returns 1113344
we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
I am trying to use the reporting services on Windows 2003 with SQLServer 2005. Everything works fine in the report manager and I can access and render the reports without any problem. But when I try to access the reports directly with the URL from the ReportServer, I get the following error : Reporting Services Error
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found
SQL Server Reporting Services
So I went to see the error log, and here is what it says :
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>GMT Standard Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__11_10_2006_13_43_22.log</Path> <SystemName>VODAFONE</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> w3wp!webserver!5!11/10/2006-13:43:23:: i INFO: Reporting Web Server started w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Reporting Services starting SKU: Enterprise w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Evaluation copy: 0 days left w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!library!5!10/11/2006-13:43:23:: Unhandled exception was caught: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded() at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance() at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport() at Microsoft.Reporting.WebForms.ReportViewer..ctor() at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor() at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm() at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl) at ASP.pages_reportviewer_aspx.FrameworkInitialize() at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) w3wp!library!5!10/11/2006-13:43:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded() at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance() at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport() at Microsoft.Reporting.WebForms.ReportViewer..ctor() at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor() at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm() at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl) at ASP.pages_reportviewer_aspx.FrameworkInitialize() at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) --- End of inner exception stack trace --- w3wp!library!5!10/11/2006-13:43:25:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson w3wp!library!5!10/11/2006-13:43:26:: i INFO: Catalog SQL Server Edition = Enterprise w3wp!webserver!5!11/10/2006-13:43:34:: i INFO: Reporting Web Server stopped
Does anyone have any idea about what happends ? Any suggestions maybe about anything I should try ?
Thanks very much in advance.
[edit] I just installed a few minutes ago the service pack 1 for SQL Server 2005 and Reporting services, but obviously it doesn't change anything to my problem. [/edit]
An internal error occurred on the report server. See the error log for more details. (rsInternalError) - This is the error I get when I try to edit a subcription then click finish.Where do I start in solving this?, heres the log -<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product> <Locale>en-US</Locale> <TimeZone>GMT Daylight Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__06_14_2007_12_02_20.log</Path> <SystemName>MCSCITRIX</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file. w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id) at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task) at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule) at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext) at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData) at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings) at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: HTTP status code --> 200 -------Details-------- System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id) at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task) at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule) at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext) at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData) at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings) at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.ReportingServices.UI.DataDrivenSubscription.Save()
at Microsoft.ReportingServices.UI.DataDrivenPropertiesControl.Buttons_FinishClick(Object sender, EventArgs args)
at Microsoft.ReportingServices.UI.WizardButtons.OnFinishedClicked(EventArgs args)
at Microsoft.ReportingServices.UI.WizardButtons.FinishButton_Click(Object sender, EventArgs args)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal() at System.Threading.Thread.Abort(Object stateInfo) at System.Web.HttpResponse.End() at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm) at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id) at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task) at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule) at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext) at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData) at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings) at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow() at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute() at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) --- End of inner exception stack trace --- at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters) w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: HTTP status code --> 200 -------Details--------
I was created report with 9 sub reports , with multiple column driildown for based on client requirement, iam displying the correct data and in database server data is availabel between 11/01/2007 to 11/30/2007, iam applying the input parameters are begin date, end date, region(defaultly ALL), Department(defaulty ALL), site(defaulty ALL).
my problem is while selecting the default dates (minum and maximum dateranges) with selecting ALL regions, ALL departments, ALL sites iam not getting the output. it showing error like
" An error occur on local report processing, an internal error occur on report server, see error log for more details"
but iam selecting the date as 11/01/2007 to 11/02/2007( that is not large records, between two dates only) it shows correct output.
while applying the default ranges that is 11/01/2007 to 11/30/2007 report shows above mentioned error.
problem with 9 sub reports ? or any thying
please help me how to solve my problem next coming two days i have to deploy my report to client, at the time it will show data between default date ranges.
An internal error occurred on the report server. See the error log for more details.
I was trying to preview my report and this keeps coming up. I go to the logfiles to see what may be the issue and there are no errors in the log files(s). Can someone let me know what the usual path or name of the error log this is supposed to write to.
I have rs2005 installed. I created some reports through SQL Server Business Intelligence Development Studio. I can preview reports fine in the studio. But after deploying it, on //localhost/reports, when I click the report, it takes a while to calculate and then give me error: "An internal error occurred on the report server. See the error log for more details. "
The weird thing is if I restart report service, it will display report fine on the first time, then fail on the following attempts.
Here is what's in the log file SQLDUMPER_ERRORLOG.log
<Header> <Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product> <Locale>en-US</Locale> <TimeZone>Pacific Standard Time</TimeZone> <Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__03_20_2006_16_48_01.log</Path> <SystemName>MSI-SQL01</SystemName> <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName> <OSVersion>5.2.3790.65536</OSVersion> </Header> w3wp!webserver!1!3/20/2006-16:48:02:: i INFO: Reporting Web Server started w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file. w3wp!library!1!3/20/2006-16:48:02:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file. w3wp!resourceutilities!1!3/20/2006-16:48:02:: i INFO: Reporting Services starting SKU: Enterprise w3wp!resourceutilities!1!3/20/2006-16:48:02:: i INFO: Evaluation copy: 0 days left w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!runningjobs!1!3/20/2006-16:48:02:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds w3wp!library!1!03/20/2006-16:48:05:: i INFO: Call to GetPermissions:/ w3wp!library!1!03/20/2006-16:48:05:: i INFO: Catalog SQL Server Edition = Enterprise w3wp!library!5!03/20/2006-16:48:05:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:08:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!5!03/20/2006-16:48:09:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:10:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Withdraw w3wp!library!1!03/20/2006-16:48:10:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:12:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Withdraw' ) w3wp!library!1!03/20/2006-16:48:13:: Using folder C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesRSTempFiles for temporary files. w3wp!webserver!1!03/20/2006-16:48:15:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Withdraw', Stream='' w3wp!library!5!03/20/2006-16:48:17:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!5!03/20/2006-16:48:17:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:18:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Withdraw w3wp!library!1!03/20/2006-16:48:18:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:18:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Withdraw' ) w3wp!processing!1!03/20/2006-16:48:18:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
w3wp!library!1!03/20/2006-16:48:18:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. w3wp!library!1!03/20/2006-16:48:20:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson w3wp!webserver!1!03/20/2006-16:48:21:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.UpdateTimingInformation(RunningJobContext jobContext, Int64 totalDurationMs, Int64 reportDataRetrievalDurationMs, Int64 reportRenderingDurationMs) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) at Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() w3wp!library!1!03/20/2006-16:48:24:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!1!03/20/2006-16:48:24:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:30:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Enrollment w3wp!library!1!03/20/2006-16:48:30:: i INFO: Call to GetSystemPermissions w3wp!library!1!03/20/2006-16:48:30:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!webserver!1!03/20/2006-16:48:30:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:37:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!cache!5!03/20/2006-16:48:37:: i INFO: Session live: /StockSelfServie_Reports/ESPP_Enrollment w3wp!webserver!5!03/20/2006-16:48:37:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:38:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!cache!5!03/20/2006-16:48:38:: i INFO: Session live: /StockSelfServie_Reports/ESPP_Enrollment w3wp!webserver!5!03/20/2006-16:48:38:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:38:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!cache!5!03/20/2006-16:48:38:: i INFO: Session live: /StockSelfServie_Reports/ESPP_Enrollment w3wp!webserver!5!03/20/2006-16:48:38:: i INFO: Processed report. Report='/StockSelfServie_Reports/ESPP_Enrollment', Stream='' w3wp!library!5!03/20/2006-16:48:39:: i INFO: Call to RenderNext( '/StockSelfServie_Reports/ESPP_Enrollment' ) w3wp!processing!5!03/20/2006-16:48:39:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) Microsoft.ReportingServices.Library.RenderSnapshotAction.Render() Microsoft.ReportingServices.Library.RSService.RenderFromSessionNoCache(CatalogItemContext reportContext, ClientRequest session, RenderingResult& result) Microsoft.ReportingServices.Library.RSService.RenderFromSession(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderNext(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effecectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderNextCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderNextCancelableStep.RenderNext(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
w3wp!library!5!03/20/2006-16:48:39:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. w3wp!library!5!03/20/2006-16:49:12:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson w3wp!webserver!5!03/20/2006-16:49:12:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.UpdateTimingInformation(RunningJobContext jobContext, Int64 totalDurationMs, Int64 reportDataRetrievalDurationMs, Int64 reportRenderingDurationMs) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) at Microsoft.ReportingServices.Library.RenderSnapshotAction.Render() at Microsoft.ReportingServices.Library.RSService.RenderFromSessionNoCache(CatalogItemContext reportContext, ClientRequest session, RenderingResult& result) at Microsoft.ReportingServices.Library.RSService.RenderFromSession(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) at Microsoft.ReportingServices.Library.RSService.RenderNext(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effecectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.Library.RenderNextCancelableStep.Execute() at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() --- End of inner exception stack trace --- at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() at Microsoft.ReportingServices.Library.RenderNextCancelableStep.RenderNext(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() at Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() w3wp!library!5!03/20/2006-16:49:14:: i INFO: Call to GetPermissions:/StockSelfServie_Reports w3wp!library!5!03/20/2006-16:49:14:: i INFO: Call to GetSystemPermissions w3wp!library!5!03/20/2006-16:49:16:: i INFO: Call to GetPermissions:/StockSelfServie_Reports/ESPP_Change w3wp!library!5!03/20/2006-16:49:16:: i INFO: Call to GetSystemPermissions w3wp!library!5!03/20/2006-16:49:16:: i INFO: Call to RenderFirst( '/StockSelfServie_Reports/ESPP_Change' ) w3wp!processing!5!03/20/2006-16:49:16:: a ASSERT: Assertion failed! Call stack: Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension renderer, DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc, CreateReportChunk cacheDataCallback, Boolean& dataCached) Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(DateTime executionTimeStamp, GetReportChunk getCompiledDefinitionCallback, ProcessingContext pc, RenderingContext rc) Microsoft.ReportingServices.Library.RSService.RenderAsLive(CatalogItemContext reportContext, ItemProperties properties, ParameterInfoCollection effectiveParameters, Guid reportId, ClientRequest session, String description, ReportSnapshot intermediateSnapshot, DataSourceInfoCollection thisReportDataSources, Boolean cachingRequested, Warning[]& warnings, ReportSnapshot& resultSnapshotData, DateTime& executionDateTime, RuntimeDataSourceInfoCollection& alldataSources, UserProfileState& usedUserProfile) Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters) Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute() Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper() Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderReport(HttpResponseStreamFactory streamFactory) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.DoStreamedOperation(StreamedOperation operation) Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPageContent() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.RenderPage() Microsoft.ReportingServices.WebServer.ReportServiceHttpHandler.ProcessRequest(HttpContext context) System.Web.HttpApplication+CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) System.Web.HttpApplication.ResumeSteps(Exception error) System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr) System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
w3wp!library!5!03/20/2006-16:49:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., un-named assertion fired for component processing; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details.
I get this after dumping about 2GB and 885800 rows X 2 columns from a simple query to a file.
The command line is simple:
sqlcmd -b -h -1 -S "sindb05" -d ACT -E -Q "select date, data from data_strings with (nolock) where date > '2008-01-20 12:00:00' and date < dateadd(hour, +1, '2008-01-20 12:00:00')" -o out.txt
I am running SQL7 SP2 on a Compaq Proliant 5500 (NT4 Server SP6a) with dual processor. When trying to schedule any jobs with DTSRUN I get the following error:
DTSRun.exe - Application Error The instruction at "0x77f64d7b" referenced memory at "0x00000010". The memory could not be read.
I have the following code and I keep on getting the following error: Internal SQL Server error. Line 160: da.Fill(dtStudent) <code> Private Function CreateStudentDT() As DataTable
Dim cmdStudent As SqlCommand = New SqlCommand Dim strSPName As String Dim strSQL As String Dim dtStudent As New DataTable cmdStudent.Connection = objConn cmdStudent.CommandType = CommandType.StoredProcedure cmdStudent.Parameters.Add("@ParamYear", mprmYear.Code) cmdStudent.Parameters.Add("@paramDate", mstrParamToDate) cmdStudent.Parameters.Add("@ParamMonth", mprmMonth.Code) cmdStudent.CommandText = "AmountMarkedMosad" objConn.Open() Dim da As SqlDataAdapter = New SqlClient.SqlDataAdapter(cmdStudent) da.Fill(dtStudent) objConn.Close() Return dtStudent End Function