Invalid Syntax

Aug 10, 2006

Im 3 months into building a web page for my company. I want to insert and update data into the data base, but i keep getting this error message (Incorrect syntax near 'nvarchar') I have no programing experience and I dont understand the stack trace. Im using visual web developer which comes with sql express. Here is all the code. Thank you all for any help offered.
jdslim

Incorrect syntax near 'nvarchar'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.
Stack trace

[SqlException (0x80131904): Incorrect syntax near 'nvarchar'.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +186
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1121
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +334
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +407
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +149
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +493
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +551
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +173
System.Web.UI.WebControls.DetailsView.HandleInsert(String commandArg, Boolean causesValidation) +628
System.Web.UI.WebControls.DetailsView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +745
System.Web.UI.WebControls.DetailsView.OnBubbleEvent(Object source, EventArgs e) +162
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56
System.Web.UI.WebControls.DetailsViewRow.OnBubbleEvent(Object source, EventArgs e) +117
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +107
System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +175
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +244
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3837


Source code For web page

<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False" DataKeyNames="Supplier" DataSourceID="SqlDataSource1" Height="50px" Style="z-index: 100; left: 333px;
position: absolute; top: 264px" Width="125px">
<Fields>
<asp:BoundField DataField="Supplier" HeaderText="Supplier" ReadOnly="True" SortExpression="Supplier" />
<asp:BoundField DataField="Variety" HeaderText="Variety" SortExpression="Variety" />
<asp:BoundField DataField="Arrival Date" HeaderText="Arrival Date" SortExpression="Arrival Date" />
<asp:CommandField ShowInsertButton="True" />
</Fields>
</asp:DetailsView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>" DeleteCommand="DELETE FROM [Table1] WHERE [Supplier] = @original_Supplier AND [Variety] = @original_Variety AND [Arrival Date] = @original_Arrival_Date"
InsertCommand="INSERT INTO [Table1] ([Supplier], [Variety], [Arrival Date]) VALUES (@Supplier, @Variety, @Arrival_Date)"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT * FROM [Table1]"
UpdateCommand="UPDATE [Table1] SET [Variety] = @Variety, [Arrival Date] = @Arrival_Date WHERE [Supplier] = @original_Supplier AND [Variety] = @original_Variety AND [Arrival Date] = @original_Arrival_Date">
<DeleteParameters>
<asp:Parameter Name="original_Supplier" Type="String" />
<asp:Parameter Name="original_Variety" Type="String" />
<asp:Parameter Name="original_Arrival_Date" Type="DateTime" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="Variety" Type="String" />
<asp:Parameter Name="Arrival_Date" Type="DateTime" />
<asp:Parameter Name="original_Supplier" Type="String" />
<asp:Parameter Name="original_Variety" Type="String" />
<asp:Parameter Name="original_Arrival_Date" Type="DateTime" />
</UpdateParameters>
<InsertParameters>
<asp:Parameter Name="Supplier" Type="String" />
<asp:Parameter Name="Variety" Type="String" />
<asp:Parameter Name="Arrival_Date" Type="DateTime" />
</InsertParameters>
</asp:SqlDataSource>

</div>
</form>
</body>
</html>

View 3 Replies


ADVERTISEMENT

Invalid Syntax Near 'nvarchar'

Jul 26, 2006

     Im trying to update  and modify data in a grid view in my sql data base.  I keep getting this error..What is  the solution to this.  Sorry, I have no programing experience.  All help will be greatly appreciated. thank youjdslimIncorrect syntax near 'nvarchar'. Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'nvarchar'.

Source Error:





An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.







Stack Trace:




[SqlException (0x80131904): Incorrect syntax near 'nvarchar'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +186 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1121 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +334 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +407 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +149 System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +493 System.Web.UI.WebControls.SqlDataSourceView.ExecuteUpdate(IDictionary keys, IDictionary values, IDictionary oldValues) +915 System.Web.UI.DataSourceView.Update(IDictionary keys, IDictionary values, IDictionary oldValues, DataSourceViewOperationCallback callback) +179 System.Web.UI.WebControls.GridView.HandleUpdate(GridViewRow row, Int32 rowIndex, Boolean causesValidation) +1140 System.Web.UI.WebControls.GridView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +835 System.Web.UI.WebControls.GridView.OnBubbleEvent(Object source, EventArgs e) +162 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.GridViewRow.OnBubbleEvent(Object source, EventArgs e) +118 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56 System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +107 System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +175 System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +244 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3840

View 5 Replies View Related

Invalid Syntax In My Sproc?!?!

Feb 18, 2007

Hi I have a gridview that is being populated from a method that gets it's data from a table view.
SELECT     dbo.cis_AlumniContact.Street, dbo.cis_AlumniContact.City, dbo.cis_AlumniContact.State, dbo.cis_AlumniContact.Telephone,                       dbo.cis_AlumniContact.Occupation, dbo.cis_AlumniContact.Description, dbo.cis_AlumniContact.Zip, dbo.cis_AlumniContact.FirstName,                       dbo.cis_AlumniContact.LastName, dbo.cis_AlumniContact.YearGraduate, dbo.cis_AlumniContact.Email, dbo.cis_AlumniContact.Contact,                       dbo.aspnet_Users.UserName, dbo.cis_StudentId.UaaStudentIdFROM         dbo.aspnet_Users INNER JOIN                      dbo.cis_AlumniContact ON dbo.aspnet_Users.UserId = dbo.cis_AlumniContact.UserId INNER JOIN                      dbo.cis_StudentId ON dbo.aspnet_Users.UserId = dbo.cis_StudentId.UserId
No big deal, works great.  Now when I click update I call this method

<DataObjectMethod(DataObjectMethodType.Update)> Public Sub UpdateAlumni(ByVal Street As String, ByVal City As String, ByVal State As String, ByVal Telephone As String, ByVal Occupation As String, ByVal Description As String, ByVal Zip As String, ByVal FirstName As String, ByVal LastName As String, ByVal YearGraduate As String, ByVal Email As String, ByVal Contact As Boolean, ByVal original_UserName As String, ByVal UaaStudentId As String)
Try
Dim connx As New SqlConnection(getConnectionString)
connx.Open()
Dim sqlCmd As New SqlCommand("cis_UpdateAlumniContact", connx)
sqlCmd.Parameters.Add(New SqlParameter("@UserName", SqlDbType.NVarChar))
sqlCmd.Parameters("@UserName").Value = original_UserName
sqlCmd.Parameters.Add(New SqlParameter("@FirstName", SqlDbType.NVarChar))
sqlCmd.Parameters("@FirstName").Value = FirstName
sqlCmd.Parameters.Add(New SqlParameter("@LastName", SqlDbType.NVarChar))
sqlCmd.Parameters("@LastName").Value = LastName
sqlCmd.Parameters.Add(New SqlParameter("@Email", SqlDbType.NVarChar))
sqlCmd.Parameters("@Email").Value = Email
sqlCmd.Parameters.Add(New SqlParameter("@Street", SqlDbType.NVarChar))
sqlCmd.Parameters("@Street").Value = Street
sqlCmd.Parameters.Add(New SqlParameter("@City", SqlDbType.NVarChar))
sqlCmd.Parameters("@City").Value = City
sqlCmd.Parameters.Add(New SqlParameter("@State", SqlDbType.NVarChar))
sqlCmd.Parameters("@State").Value = State
sqlCmd.Parameters.Add(New SqlParameter("@Occupation", SqlDbType.NVarChar))
sqlCmd.Parameters("@Occupation").Value = Occupation
sqlCmd.Parameters.Add(New SqlParameter("@Description", SqlDbType.NVarChar))
sqlCmd.Parameters("@Description").Value = Description
sqlCmd.Parameters.Add(New SqlParameter("@Telephone", SqlDbType.NChar))
sqlCmd.Parameters("@Telephone").Value = Telephone
sqlCmd.Parameters.Add(New SqlParameter("@Zip", SqlDbType.NChar))
sqlCmd.Parameters("@Zip").Value = Zip
sqlCmd.Parameters.Add(New SqlParameter("@Contact", SqlDbType.Bit))
sqlCmd.Parameters("@Contact").Value = Contact
sqlCmd.Parameters.Add(New SqlParameter("@YearGraduate", SqlDbType.NVarChar))
sqlCmd.Parameters("@YearGraduate").Value = YearGraduate
Dim cmd As SqlDataReader = sqlCmd.ExecuteReader
Catch ex As Exception
Dim er As New cis_ODS_Error
er.InsertError("cis_ODS_Alumni - UpdateAlumni: " + ex.Message.ToString)
End Try
End Sub
The sproc it calls is:

ALTER PROCEDURE dbo.cis_UpdateAlumniContact
@UserName as nvarchar(50),
@Street as nvarchar(50),
@City as nvarchar(50),
@State as nvarchar(2),
@Telephone as nvarchar(50),
@Occupation as nvarchar(50),
@Description as nvarchar(50),
@Zip as nvarchar(50),
@FirstName as nvarchar(50),
@LastName as nvarchar(50),
@YearGraduate as nvarchar(4),
@Email as nvarchar(50),
@Contact as bit
AS
UPDATE cis_AlumniContact
 
SET Street = @Street, City = @City, State = @State, Telephone = @Telephone, Occupation = @Occupation, Description = @Description, Zip = @Zip, FirstName = @FirstName, LastName = @LastName, YearGraduate = @YearGraduate, Email = @Email, Contact = @Contact
 
FROM aspnet_Users INNER JOIN cis_AlumniContact
 
ON cis_AlumniContact.UserId = aspnet_Users.UserId
 
WHERE @UserName = aspnet_Users.UserName
 
RETURN
I get this vague error
cis_ODS_Alumni - UpdateAlumni: Incorrect syntax near 'cis_UpdateAlumniContact'
 
If I execute the SQL from the editor it works fine.  The only thing different about this sproc and my other update sprocs is the inner join.  Any idea? Thanks

View 2 Replies View Related

BUG? SQL 2k - IN () Allows Invalid Syntax And Fails Silently

Jul 23, 2005

Behavior I found:Invalid Column name in select embedded in a IN() clause appears toreturn a NULL, and fails silently - completing the query givingincorrect results.Behavior I expected:RunTime error, as column didn't exist.-------------------------------------------------------createtable #THEONE( RowNo int not null )createtable #THEOTHER( RowNumb int not null )select *from #THEONEwhere RowNo not in (-- SHOULD THROW RUNTIME ERROR --select RowNo from #THEOTHER)--------------------------------------------------------- select @@VERSION-- Microsoft SQL Server 2000 - 8.00.871 (Intel X86)-- Oct 21 2003 16:16:50-- Copyright (c) 1988-2003 Microsoft Corporation-- Developer Edition on Windows NT 5.0 (Build 2195: Service Pack 4)

View 4 Replies View Related

Invalid Syntax Near Keyword Default (was Why Do I Get The Following Error?)

Mar 8, 2005

select * from CurrencyMaster where default=true

invalid syntax near keyword default.

View 1 Replies View Related

Replication Invalid Syntax Error: Table Has Computed Primary Key

Sep 13, 2006

Hi,

I have set up a publisher using transactional replication. ( all seems ok). The initial snapshot has been generated.

The replication share on the distributor has all the generated DDL in it.

I add a subscriber. The tables are generated up to tblCountry then I get an incorrect syntax near ')' error

The Replication Monitor shows the following code as the cause. ( bold indicates incorrect sql)

Is this a bug in Replication (as this is an autogenerated sp)or have I configured something incorrectly?



The ddl for the table index is as follows ( from the replication folder)



/----

CREATE TABLE [APP].[tblCountry](
[CountryId] AS ([ISO 3166-1 NUMERIC-3]) PERSISTED NOT NULL,
[CountryCode] AS ([ISO 3166-1 ALPHA-2]) PERSISTED NOT NULL,
[CountryName] [varchar](80) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-2] [char](2) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 ALPHA-3] [char](3) COLLATE Latin1_General_CI_AS NOT NULL,
[ISO 3166-1 NUMERIC-3] [int] NOT NULL
)

GO

---/

/------ Keys ddl (.dx)

ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [PK_TBLCOUNTRY] PRIMARY KEY CLUSTERED ([CountryId])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA2] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-2])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_ALPHA3] UNIQUE NONCLUSTERED ([ISO 3166-1 ALPHA-3])
go
ALTER TABLE [APP].[tblCountry] ADD CONSTRAINT [UQ_TBLCOUNTRY_COUNTRYNAME] UNIQUE NONCLUSTERED ([CountryName])
go


--------/

/------------

Command attempted:


create procedure "sp_MSins_APPtblCountry_msrepl_ccs"
@c1 int,@c2 varchar(80),@c3 char(2),@c4 char(3),@c5 int
as
begin
if exists ( select * from "APP"."tblCountry"
where
)
begin
update "APP"."tblCountry" set
"CountryName" = @c2
,"ISO 3166-1 ALPHA-2" = @c3
,"ISO 3166-1 ALPHA-3" = @c4
,"ISO 3166-1 NUMERIC-3" = @c5
where
end
else
begin
insert into "APP"."tblCountry"(
"CountryName"
,"ISO 3166-1 ALPHA-2"
,"ISO 3166-1 ALPHA-3"
,"ISO 3166-1 NUMERIC-3"
)
values (
@c2
,@c3
,@c4

(Transaction sequence number: 0x00000016000004F2014500000000, Command ID: 213)

------------/

View 5 Replies View Related

Parser: The Following Syntax Error Occurred During Parsing: Invalid Token, Line 1, Offset 67, ? .

May 29, 2008

I'm sure I am not undestanding some basic concept here but the following formula always produces an invalid token error at the '-' sign. In this example, I'm trying to subtract out a specific month from the total (this is a simplified example, my actual formula needs to compute a % change over time using lag...)


This produces the invalid token error (it always errors at the '-' in the equation)

with member [Measures].[MyCalcMeasure] as [Measures].[MyBaseMeasure]-([Date Submitted].[Date Submitted YQMD].[month].&[2008]&[1],[Measures].[MyBaseMeasure])
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube

But this works

with member [Measures].[MyCalcMeasure] as [Measures].[MyBaseMeasure]
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube


As does this

with member [Measures].[MyCalcMeasure] as ([Date Submitted].[Date Submitted YQMD].[month].&[2008]&[1],[Measures].[MyBaseMeasure])
select [Measures].[MyCalcMeasure] on columns,
[MyDim].[MyHierarchy].[Level1].members on rows
from MyCube


What am I missing?

View 3 Replies View Related

SQLDescribeParam With Subselect: Invalid Parameter Number/Invalid Descriptor Index

Apr 21, 2008

Hello,

I've got the following query:

SELECT zA."ID" AS fA_A
, zA."TEXT" AS fA_B
, (
SELECT COUNT(zC."ID")
FROM Test."Booking" AS zC
) AS fA_E
FROM Test."Stack" AS zA
WHERE zA."ID" = ?

With this query I call:
- SQLPrepare -> SQL_SUCCESS=0
- SQLNumParams -> SQL_SUCCESS=0, pcpar = 1
- SQLDescribeParam( 1 ) -> SQL_ERROR=-1, [Microsoft][ODBC SQL Server Driver]Invalid parameter number", "[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index"

Is there a problem with this calling sequence or this query? Or is this a problem of SQL Server?

Regards
Markus

View 7 Replies View Related

Incorrect Syntax Near The Keyword CONVERT When The Syntax Is Correct - Why?

May 20, 2008

Why does the following call to a stored procedure get me this error:


Msg 156, Level 15, State 1, Line 1

Incorrect syntax near the keyword 'CONVERT'.




Code Snippet

EXECUTE OpenInvoiceItemSP_RAM CONVERT(DATETIME,'01-01-2008'), CONVERT(DATETIME,'04/30/2008') , 1,'81350'




The stored procedure accepts two datetime parameters, followed by an INT and a varchar(10) in that order.

I can't find anything wrong in the syntax for CONVERT or any nearby items.


Help me please. Thank you.

View 7 Replies View Related

Incorrect Syntax When There Appears To Be No Syntax Errors.

Dec 14, 2003

I keep receiving the following error whenever I try and call this function to update my database.

The code was working before, all I added was an extra field to update.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'


Public Sub MasterList_Update(sender As Object, e As DataListCommandEventArgs)

Dim strProjectName, txtProjectDescription, intProjectID, strProjectState as String
Dim intEstDuration, dtmCreationDate, strCreatedBy, strProjectLead, dtmEstCompletionDate as String

strProjectName = CType(e.Item.FindControl("txtProjectName"), TextBox).Text
txtProjectDescription = CType(e.Item.FindControl("txtProjDesc"), TextBox).Text
strProjectState = CType(e.Item.FindControl("txtStatus"), TextBox).Text
intEstDuration = CType(e.Item.FindControl("txtDuration"), TextBox).Text
dtmCreationDate = CType(e.Item.FindControl("txtCreation"),TextBox).Text
strCreatedBy = CType(e.Item.FindControl("txtCreatedBy"),TextBox).Text
strProjectLead = CType(e.Item.FindControl("txtLead"),TextBox).Text
dtmEstCompletionDate = CType(e.Item.FindControl("txtComDate"),TextBox).Text
intProjectID = CType(e.Item.FindControl("lblProjectID"), Label).Text

Dim strSQL As String
strSQL = "Update tblProject " _
& "Set strProjectName = @strProjectName, " _
& "txtProjectDescription = @txtProjectDescription, " _
& "strProjectState = @strProjectState, " _
& "intEstDuration = @intEstDuration, " _
& "dtmCreationDate = @dtmCreationDate, " _
& "strCreatedBy = @strCreatedBy, " _
& "strProjectLead = @strProjectLead, " _
& "dtmEstCompletionDate = @dtmEstCompletionDate, " _
& "WHERE intProjectID = @intProjectID"

Dim myConnection As New SqlConnection(System.Configuration.ConfigurationSettings.AppSettings("connectionstring"))
Dim cmdSQL As New SqlCommand(strSQL, myConnection)

cmdSQL.Parameters.Add(new SqlParameter("@strProjectName", SqlDbType.NVarChar, 40))
cmdSQL.Parameters("@strProjectName").Value = strProjectName
cmdSQL.Parameters.Add(new SqlParameter("@txtProjectDescription", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@txtProjectDescription").Value = txtProjectDescription
cmdSQL.Parameters.Add(new SqlParameter("@strProjectState", SqlDbType.NVarChar, 30))
cmdSQL.Parameters("@strProjectState").Value = strProjectState
cmdSQL.Parameters.Add(new SqlParameter("@intEstDuration", SqlDbType.NVarChar, 60))
cmdSQL.Parameters("@intEstDuration").Value = intEstDuration
cmdSQL.Parameters.Add(new SqlParameter("@dtmCreationDate", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@dtmCreationDate").Value = dtmCreationDate
cmdSQL.Parameters.Add(new SqlParameter("@strCreatedBy", SqlDbType.NVarChar, 10))
cmdSQL.Parameters("@strCreatedBy").Value = strCreatedBy
cmdSQL.Parameters.Add(new SqlParameter("@strProjectLead", SqlDbType.NVarChar, 15))
cmdSQL.Parameters("@strProjectLead").Value = strProjectLead
cmdSQL.Parameters.Add(new SqlParameter("@dtmEstCompletionDate", SqlDbType.NVarChar, 24))
cmdSQL.Parameters("@dtmEstCompletionDate").Value = dtmEstCompletionDate
cmdSQL.Parameters.Add(new SqlParameter("@intProjectID", SqlDbType.NChar, 5))
cmdSQL.Parameters("@intProjectID").Value = intProjectID

myConnection.Open()
cmdSQL.ExecuteNonQuery
myConnection.Close()

MasterList.EditItemIndex = -1
BindMasterList()


End Sub

Thankyou in advance.

View 3 Replies View Related

Which Is Faster? Conditional Within JOIN Syntax Or WHERE Syntax?

Mar 31, 2008

Forgive the noob question, but i'm still learning SQL everyday and was wondering which of the following is faster? I'm just gonna post parts of the SELECT statement that i've made changes to:

INNER JOIN Facilities f ON e.Facility = f.FacilityID AND f.Name = @FacilityName

OR

WHERE f.Name = @FacilityName


My question is whether or not the query runs faster if i put the condition within the JOIN line as opposed to putting in the WHERE line? Both ways seems to return the same results but the time difference between methods is staggering? Putting the condition within the JOIN line makes the query run about 3 times faster?

Again, forgive my lack of understanding, but could someone agree or disagree and give me the cliff-notes version of why or why not?

Thanks!

View 4 Replies View Related

Converting Rrom Access Syntax To Sql Syntax

Sep 23, 2007


Ok I am tying to convert access syntax to Sql syntax to put it in a stored procedure or view..
Here is the part that I need to convert:

SELECT [2007_hours].proj_name, [2007_hours].task_name, [2007_hours].Employee,
IIf(Mid([task_name],1,3)='PTO','PTO_Holiday',
IIf(Mid([task_name],1,7)='Holiday','PTO_Holiday',
IIf(Mid([proj_name],1,9) In ('9900-2831','9900-2788'),'II Internal',
IIf(Mid([proj_name],1,9)='9900-2787','Sales',
IIf(Mid([proj_name],1,9)='9910-2799','Sales',
IIf(Mid([proj_name],1,9)='9920-2791','Sales',

)
)
)
)
) AS timeType, Sum([2007_hours].Hours) AS SumOfHours
from................

how can you convert it to sql syntax

I need to have a nested If statment which I can't do in sql (in sql I have to have select and from Together for example ( I can't do this in sql):
select ID, FName, LName
if(SUBSTRING(FirstName, 1, 4)= 'Mike')
Begin
Replace(FirstNam,'Mike','MikeTest')
if(SUBSTRING(LastName, 1, 4)= 'Kong')
Begin
Replace(LastNam,'Kong,'KongTest')
if(SUBSTRING(Address, 1, 4)= '1245')
Begin
.........
End
End

end




Case Statement might be the solution but i could not do it.






Your input will be appreciated

Thank you

View 5 Replies View Related

Incorrect Syntax Near The Keyword 'from'. Line 1: Incorrect Syntax Near ')'.

May 27, 2008

This is the error it gives me for my code and then it calls out line 102.  Line 102 is my  buildDD(sql, ddlPernames)  When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one.  Could it not like something in my sql select statement.  thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged
Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue
sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _
& "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0"))
buildDD(sql, ddlPerNames)
 
End Sub

View 2 Replies View Related

Invalid Value For Key 'attachdbfilename'.

Nov 8, 2006

HI,
 We upgraded to SQL Server 2005 Standard Edition for our ASP.NET 2.0 website.  We were using SQL Server Express 2005.  That worked fine.  Now we are unable to connect to the database.  I have googled, but I just cann't figure out what is going on.  Any help is appreciated.  Here is the error.
An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
In our firewall sqlbrowser.exe and sqlservr.exe are allowed.
Thanks Matt

View 11 Replies View Related

Invalid Object Name

Sep 27, 2007

Ok I'm trying to connect to my easycgi.com MSSQL database.I can connect OK.My ID is in the db_owner group.I can create and edit tables and data.I can open a table and see the data.I can view the SQL statement behind the open table (select * from Table) and execute it successfully.But if I open a new query window and type "select * from [table]" (or any other query), no matter which table it is, I get an error:Msg 208, Level 16, State 1, Line 1Invalid object name '[table name]'.I've searched the web and found this error plenty of times, usually associated with security or the schema. But all my objects are under dbo and I'm in db_owner... ??? 

View 6 Replies View Related

Invalid Connection

Jun 19, 2008

When trying to connect to a remote SQL 2005 Express Server, I get this error message:  [DBNETLIB][ConnectionOpen (ParseConnectParams()).]Invalid connection.
 I can remotely connect to the server with the same username and password using osql in command and I can also connect to the server remotely with SQL Server Management Studio installed on this machine.
 Here is my connection string:
 Provider=SQLOLEDB.1;Password=password;Persist Security Info=True;User ID=uid;Initial Catalog=EBM;Data Source=xxx.xxx.xxx.xxxSQLEXPRESS;Use Encryption for Data=False
 The same connection string works if connecting locally, via changing the ip address to the machine name:
Provider=SQLOLEDB.1;Password=password;Persist Security Info=True;User ID=uid;Initial Catalog=EBM;Data Source=machinenameSQLEXPRESS;Use Encryption for Data=False
 
Any help would be appreciated.

View 2 Replies View Related

Invalid Column Name

Mar 19, 2004

I get a Invalid Column Name ' '. with this procedure. Can anyone see what migh be wrong?

Thanks,

SELECT A.CompanyName,C.FirstName,C.LastName,C.Client_ID,
CASE WHEN A.[CompanyName] IS NULL OR A.[CompanyName] = '' THEN C.[FirstName] +" "+ C.[LastName] ELSE A.[CompanyName] END AS DRName, C.Client_ID
FROM tblClients C INNER JOIN tblClientAddresses A ON C.Client_ID = A.Client_ID
WHERE (C.Client_ID = 15057) AND (A.MailTo=1) AND Convert(varchar(5), GETDATE(), 10) BETWEEN Convert(varchar(5), A.Startdate, 10) AND Convert(varchar(5), A.Enddate, 10) OR (A.Startdate Is Null) AND (A.EndDate Is Null)
GO

View 3 Replies View Related

Invalid Column Name

Aug 19, 2004

Hi the following SP that causes an error.



CREATE PROCEDURE GetInfo
(
@MinPriceint=0,
@MaxPriceint=9999999999,
@TypeHomenvarchar(50)=NULL,
@Locationnvarchar(100)=NULL

)
AS

Declare @strSql nvarchar(255)
Set @strSql="Select * from table WHERE "
Set @strSql=@strSql + 'Price BETWEEN ' + CONVERT(nvarchar(20),@MinPrice) + ' and ' + CONVERT(nvarchar(20),@MaxPrice )

If @TypeHome != "No Preference"
Set @strSql=@strSql + ' and Type = ''' + @TypeHome+ ''''

If @Location != "No Preference"
Set @strSql=@strSql + ' and City = ''' + @Location+ ''''

Set @strSql=@strSql + ' and IDX = ''Y'' ORDER BY Price'
Exec(@strSql)
GO



The Error I get is:
"Error 207: Invalide Column Name 'Select * from table WHERE'
Invalid Column Name 'No Preference'
Invalid Column Name 'No Preference'

I have checked the table and the columns do exist, spelled correctly and caps are all the same. Also, this same SP in another table works just fine.

What is causing this error?

Thanks in advance!

View 1 Replies View Related

Invalid Connection

Mar 30, 2005

Hey everyone, hope you all can help me with this problem. 
We have a remotely hosted website, but we have a SQL server in our company (powers our instore portal).  I have set up our router so that i can connect to remote desktop and sql server.  I can connect to the remote desktop and i can connect to the sql server with query analyzer.  On our local site i can set up a connection to look at sqlserver.underpargolfutah.org and it works fine, everything goes well.
Now here is the problem.  On the hosted site i have set up the following
web.config >
<appSettings>
      <add key="sql_dsn" value="server=************.underpargolfutah.org;database=online;uid=sa;pwd=*******" />
</appSettings>
default.aspx >
Public Class shopDB   'publicly declare typical stuff for connections   Public conn As SqlConnection   Public cmd As SqlCommand   Public reader As SqlDataReader   Public dsn As String = ConfigurationSettings.AppSettings("sql_dsn").ToString   Public Function getBaseSelectionsByType(ByVal type)   'declare the connection   conn = New SqlConnection(dsn)   'declare command   cmd = New SqlCommand("SELECT * FROM category", conn)   'open the connection   conn.Open()   'grab data   reader = cmd.ExecuteReader(CommandBehavior.CloseConnection)   Return reader   End Function
End Class
This should all work but i get the following error
[SqlException: Invalid connection.]   System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +474   System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372   System.Data.SqlClient.SqlConnection.Open() +384   v3.shopDB.shopDB.getBaseSelectionsByType(Object type) in shopDB.vb:21   v3.shop_default.Page_Load(Object sender, EventArgs e) in default.aspx.vb:32   System.Web.UI.Control.OnLoad(EventArgs e) +67   System.Web.UI.Control.LoadRecursive() +35   System.Web.UI.Page.ProcessRequestMain() +742Any ideas? i am stumped.
Thanks in advance-Darren

View 1 Replies View Related

Invalid Column Name &#39;x&#39;

Feb 16, 2001

Can anyone tell me why I get the above message using the following stored procedure and passing in a value of 120:
CREATE Procedure qryAnalysisCountMain
(@WizardGroup1Question int)
As
EXEC("SELECT QuestionDescription FROM Questions WHERE QuestionCode = " + @WizardGroup1Question)

120 just happens to be the asci value of 'x' and whatever number I pass in gets converted into it's character equivalent and the sp tells me it can't find that column name. QuestionCode is an int field so there is no problem there

The procedure works OK with:
SELECT QuestionDescription FROM Questions WHERE QuestionCode = @WizardGroup1Question

However I need the SQL in an EXEC as the sp will eventually be dynamic so that i can pass in the name of the table to select from.

Thanks
Martin

View 1 Replies View Related

Invalid Column Name

Mar 30, 2004

Hi
I have a dynamic select statement which is showed below.
declare @query varchar(100)
set @query = 'select * from undergraduate where Gender =' + @Gender
exec (@query)

//
When I execute the @query, I get an error message like "Invalid Column Name Male".
I think I need to put a single quotation around the dynamic variable, so that I have
select * from undergraduate where Gender ='Male'. But I am not sure how to do that.

Thank you for your help!!

View 3 Replies View Related

Type Name Is Invalid

Jan 21, 2006

Dear guys

when am executing a stored procedure from asp page it will shows an err like this

"
Microsoft OLE DB Provider for SQL Server error '80040e30'

Type name is invalid
"
but the script and the database is perfectly working in local computer ..

what will be the reason.

regards jini

View 2 Replies View Related

Invalid Object

Jul 31, 2002

When running 'select * from <table> everyone gets 'invalid object' error. When they run 'select * from <database>.<objectowner>.<table> it works fine. This would lead one to believe that they're either not in their default database or that they don't own the objects. However this is not the case.

Why do they need to qualify everything if they're running from their own databaase, they own the object and they're logged in as the objectowner?

This was working fine one day but not the next. They connect using a DSN that's on a web server and they pass their login and password but not their database. I don't have this problem and can't duplicate anyone else's, but I'm not on the web server, I'm going directly to teh SQL server using Query Analyzer.

Any ideas??

View 1 Replies View Related

Invalid Object Name

Jul 12, 2005

I'm connecting to an SQL Server database through a Perl script (using Win32::ODBC). The connection seems to go through fine, as in, I get no errors. But even simple statements like "Select * from AccountTable" dont work. I get the error Invalid Object Name 'AccountTable'. The table exists and I even gave myself explicit permission for "SELECT" statements for that table.

Are there any other permissions that need to be set? The DSN defaults to the database that I need.

Any help would be most appreciated. I'm going mad here.
Thanks.
-Amrita

View 1 Replies View Related

Invalid Object Name

Feb 2, 2007

as i run my code (windows application) i get this error

Invalid object name 'dbo_TASk'.
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.

/****** Object: Stored Procedure dbo.stp_per_task_by_system_sel Script Date: DATE ******/
IF EXISTS (SELECT *
FROM dbo.sysobjects
WHERE id = OBJECT_ID(N'[dbo].[stp_per_task_by_system_sel]')
AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE [dbo].[stp_per_task_by_system_sel]
GO

CREATE PROCEDURE dbo.stp_per_task_by_system_sel
(
@sys_id int
)
AS
--------------------------------------------------------------------------------
-- Created by : Jacco B
-- Date created : 1-febrauri-2007
--------------------------------------------------------------------------------
-- Description : deze stp haalt de specefieke taken van een geselecteerd systeem uit de database
--------------------------------------------------------------------------------
-- Test string : stp_per_task_by_system_sel 'var'
--------------------------------------------------------------------------------
-- Change Log : Date By Description
-- -------- ------ ------------------------------------
--
--------------------------------------------------------------------------------
BEGIN
SET NOCOUNT ON
--declaratie locale variabelen
DECLARE @error integer,
@object_name varchar(30)

--begin transactie
SELECT @object_name = object_name(@@procid)
BEGIN TRAN @object_name

--begin procedure
SELECT SYSTEM_STANDARD_TASK.*, TASk.*
FROM SYSTEM_STANDARD_TASK INNER JOIN dbo_TASk ON SYSTEM_STANDARD_TASK.tas_id = TASk.tas_id
WHERE SYSTEM_STANDARD_TASK.sys_id = @sys_id



--Errorafhandeling
SELECT @error = @@error
IF @error <> 0
BEGIN
ROLLBACK TRAN @object_name
RETURN @error
END

--commit transactie
COMMIT TRAN @object_name
RETURN 0
END

GO


--grant exec to sql group
GRANT EXECUTE ON [dbo].[stp_per_task_by_system_sel] TO [PERIODIEK_USER]
GO

View 2 Replies View Related

Invalid Object Name Please Help

Feb 4, 2005

When i enter http://akor.alternatifim.com/
i get the error below

Microsoft OLE DB Provider for ODBC Drivers error '80040e37'

[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'tblSARKICIM'.

The SQL statement is so simple like

Select * from tblSARKICIM

However when i change the SQL statement Select * from lyric.tblSARKICIM

lyric is username and owner of the tables.


Problem is solved. I transfer the My SQL Server and then this problem occurs and i don't want change all my SQL statements.

What can i do?

View 6 Replies View Related

Invalid Handle In MS SQL

Jul 9, 2006

Hi All,

We have got a new HP server and SQL is preinstalled, But when we are trying to start SQL, it gives an error "The handle is invalid".

We tried to reinstall the SQL, but , being a server t doesn't allow to do so

Please assist.

regards,

Jatin

View 1 Replies View Related

Invalid Object Name

Jul 16, 2007

Hi,
My application uses VB6 and Sql-Server 2000.
I can’t understand why the error
INVALID OBJECT NAME Run-time error '-2147217865 (80040e37)'
appears only sometimes and not always. For example, a select instruction is executed inside a loop without any problem 1 thousand times, then when I try to execute it 1 thousand times and one, it fails.


Have you got any suggestions?

I’ve read a lot of posts on Internet Forums, without finding any solutions.

In the mail I attach, you can see that the application stops at 79%, after having executed many times the select instruction without any problem!


Thank you very much for your help!

Bye,

Emanuela

View 7 Replies View Related

Invalid Use Of Null

Dec 29, 2003

I am getting the "Invalid use of Null" message when I execute the following code under the following conditions.

fields in SQL Server table
db_date varchar(30) --> "December 29"
db_subject varchar(200) --> "Test Subject"
db_thought text --> "This is a test to see if this works"

I execute the following code from VB6

strText = "select * from db_table where db_date = 'December 29'"
ors.open strText, dbConnect
if not ors.eof then
if not isnull(ors("db_thought")) then
txtBox1 = ors("db_thought")
end if
end if

Here is my problem. Since there is a value in db_thought the code if not isnull(ors("db_thought")) evaluates to true -- this is what I expect. However when I try to assign the ors("db_thought") to the txBox1 field I get an Invalid use of Null. What am I missing?

Thanks

View 2 Replies View Related

Invalid Object Name

Feb 9, 2004

I restored all Databases in other server.

First I restored the master database and after the others databases. But when I connect by Query Analyser with a user that is a DBO and I execute a select the system return : "Invalid object name 'XXXX'"

My MS-SQL is the version 7.0.

View 1 Replies View Related

Invalid Object Name - Grr...

Mar 3, 2004

This is what I have. It works fine until I get to the select statement, then it tells me that I have an invalid object name. What am I missing? Thanks!

DECLARE @SvrName varchar(100)

if @@SERVERNAME='pubs' begin
set @SvrName=’pubs.books.isbn’
print @SvrName
end
if @@SERVERNAME='MGMFILENET' begin
set @SvrName=’store.books.isbn’
print@SvrName
end

print @@SERVERNAME
PRINT @SvrName
SELECT * FROM "@SvrName"

View 7 Replies View Related

Invalid Row Count

Mar 19, 2004

Hi,

I am building a shopping cart program, complete with an admin back end.
I am using ASP.NET, VB. NET and a SQL SERVER 2000 database.

The cart is working well... items can be added, updated and removed. However when trying to access the orders stored in the database from the admin section of the application, I am getting an "invalid record count" error.

I have no idea what this means. I've tried looking it up online, but so far no luck.

The orders are being stored in two tables connected via a foreign key.
I have no problem writing to the tables, it's just a problem reading the tables. I have dropped the two tables twice and rebuilt them, but I get the same error each time.

Any thoughts on what is causing this error?

Thanks,

-Michael

View 2 Replies View Related

Invalid Object Name

Apr 2, 2004

I am getting an error 'Invalid Object Name' when I try and insert a row yet I can query the same table and get results????

Please Help!

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved