Invalid Attribute/option Identifier (Error HY092)
Jan 21, 2004
I'm using a software called epi suite which is used to print id badges. The system is currently running on an access database and everything works according.
I am trying to migrate it off access to SQL 2k and have run into a problem when trying to insert data back into the system.
I can pull back data w/o any problems (to view and even print badges) but the minute I try to Save anything [New Image or change the card to unprinted], it comes back with the error:
Failed to save the card record.
Database error: Invalid attribute/option identifier
Error HY092[Microsoft][ODBC SQL Server Driver]
Has anybody ran into this type of situation before? The problem is, the company will only support access and says that SQL is a use at your own risk type of deal.
I'm new to using MS SQL so I am unsure what the best solution would be to try and find the problem. Is it possible that the software is just sending some sort of malformed query over to the database? Anything I have found on that error [HY092] seems to point in that general direction.
Thanks for your help.
View 4 Replies
ADVERTISEMENT
Oct 14, 2004
Hello all
I am getting this message when connecting to SQL Server through Enterprise Manager. However all my DSNs work without any problems.
================
A Connection could not be established to DBSERVER.
Reason: Invalid attribute/option identifier.
Please verify SQL Server is running and check your SQL Server registration properties (by right-clicking on the DBSERVER node) and try again.
================
I have reinstalled SQL Server 2000 and MDAC (ver 2.6) but no success.
Please help!
View 2 Replies
View Related
Jul 20, 2005
HiI currently have a problem with registering a new server in my EnterpriseManager on a new PC.I need to connect to a MSSQL2K server on a windows 2003.My current PC is on the same LAN as the server and has no problemregistering the server in Enterprise manager. This PC uses NT (about time Ichange :-)The new PC runs WIN2K. But this PC is on another LAN and has to access theserver through a firewall. Port 1433 is open in the firewall.I use a Firewall-1 authentication agent to access the server.I use SQL authentification to logon (sa account), I have checked that thenew clients network libraries are the same version as the servers.In the client network Utility I have set up an alias with the server I wantto access.The registration seems to access the SQL server, but comes out with an errorstating: "invalid attribute/option identifier"When I search KB with this message, I get nothing. Did anyone in hereexperience anything like this? Any pointers to help me move on would begreatly appreciated.best regardsRené Pedersen
View 2 Replies
View Related
Apr 1, 2008
Hi All,
Now i am using window authentication to login to SQL2005 Express. Everything is fine when I logged with administrator.
But if I use normal user to log in, then I can not connect to SQL database, even I am using user instance. I got the error message is:
Microsoft SQL Native Client (0x80004005)
Invalid connection string attribute
My connection String is:
Provider=SQLNCLI;Initial Catalog=***;Data Source=***;
Persist Security Info=False;User Instance=True;
Integrated Security=SSPI;
AttachDBFileName=directory***.mdf;"
Any idea? Thanks.
View 3 Replies
View Related
Jan 7, 2008
Hi all,
We have recently been having some problems with our server, and im stuck for ideas of what to try next!
Basically we have a busy period every 2 hours where we have many records that need to be processed etc, but we are getting an error coming back saying 'Invalid connection string attribute'.
Now this would be fine but we are using a UDL and 80% of the records are going in fine and its just this few that are coming back with this error. This happens at 3mins and 55 secs past the hour everytime too.
Now i ran SQL profiler over this time and there are records and such being processed fine, then all of a sudden at 3min and 55 secs past there is a mass 'Audit Logout' noted in profiler.
It would seem to me it has nothing to do with the connection string as it was working perfectly fine before.
The processing is done using a VB6 dll being called through ASP on IIS 6.
Does anyone have any ideas on what to try next or advice?
Thanks all
Danny
View 1 Replies
View Related
Mar 23, 2007
I'm trying to connect to a tab-delimited text file using the ODBC data access. I set it up using Administrative Tools - Data Sources (ODBC) from the start menu, and clicked the 'Guess' button under Define Format.
The schema it created looks like this:
[cims_output_data.txt]
ColNameHeader=True
Format=TabDelimited
MaxScanRows=0
CharacterSet=OEM
Col1=SIMNAME
Col2=TIMESTAMP
Col3=SIMTYPE
Col4=REGION
Col5=SECTOR
....etc.
It looks OK, but if I go back to Define in Administrative Tools and try to review it, I get a similar error message:
Ini File (or Registry) C:Program FilesCIMSschema.ini is corrupt.
Section: cims_output_data.txt, Key: Col1.
Has anyone seen this before? There is nothing on MSDN as far as I could find. I read on another forum that if you replace the label 'Col1' with 'Col' the problem is solved but it still reports that the schema is corrupt when I try to open it in Administrative Tools.
Bill.
View 5 Replies
View Related
May 6, 2015
i am parameterize  my DB connection in sql sever 2012,it showing in agent job as parameter.but when i run job it giving me error:
Argument ""Â for option "parameter" is not valid. Â The command line parameters are invalid. Â The step failed.
what i need to do is pass different environment here while deploying to different env.
View 2 Replies
View Related
Aug 10, 2015
I want to insert attibute att1 in field F1 . Value for this attribute is content of another field in this table (F2).
My query :
update MyTable
set F1.modify
('insert attribute att1 {sql:column("F2")} into (/ROOT/Node1)[1]')
Where F1 Is not null
But I get this error :
XML well-formedness check: Duplicate attribute 'att1'. Rewrite your XQuery so it returns well-formed XML.
How do I check the douplicate attribute ?
View 0 Replies
View Related
May 16, 2008
HI,
I had to change the key columns of a dimension attribute to fix an error. I did this in BIDS. The change was from a single key column to a composite key column. Now I am getting these error when I process the cube:
Measure group attribute key column x does not match source attribute ..
I looked at the cube XMLA definition under mesaure groups and it still shows a single key column with inherited binding. However, the BIDS does not give me an option correct this in any way. I have had to do this once before and the only option seems to be removing the dimension from the cube and add it back in. But that is very error prone since I lose any specific settings at the cube dimension level not to mention aggregations no longer include the dimension, etc.
Not seeing an alternative, I went through each measure group (I have 7) and changed the key columns manually in the XMLA and saved the cube. This worked, but I don't understand why BIDS automatically doesn't do it.
Is this a flaw in the BIDS or I should be missing something.
thanks
MJ
View 3 Replies
View Related
Mar 15, 2008
Is there a field in the SQLException class that identifies what specific exception was thrown. I tried Number and ErrorCode but those seem to change randomly, they are not consistent. Thanks
View 11 Replies
View Related
Sep 7, 2007
Hi,
I have the following statement with multi-part identifier error :-
SELECT #t.vno,transact.vdesc,transact.acctno,transact.camt,transact.damt,transact.ccamt,transact.cdamt
into #main
FROM transact,(
SELECT VNO,VTYPE,TDATE,SUM(CAMT) AS SCAMT,SUM(DAMT) AS SDAMT
FROM TRANSACT
WHERE YEAR = 2007 and batchno = 5
GROUP BY VNO,VTYPE,TDATE
having sum(camt) <> sum(damt)
)as #t
WHERE (transact.YEAR = 2007)
thanks
View 4 Replies
View Related
May 16, 2008
Hi i am finding difficulty in adding updating the Last transaction Date of Materials Loaded Out.
The Master table has LoadID, LastLoadDate.
Child Table has MaterialID, LoadID, Weight1, Weight1DateTime, Weight2, Weight2DateTime
My Requirement is to update the Master.LastLoadDate field with the Highest date of the materials loaded out on different days.
I wrote the following query and it is getting me
" The multi-part identifier "#tblTemp.Mydate" could not be bound "
update table Tbl_LoadMaster set LastTransDate=(Select MAX(#tblTemp1.Mydate) as MaxDate from (
Select * from(
select Distinct Weight1DateTime as MyDate from Tbl_LoadMaterialDetails where LoadID=1 Union
select Distinct Weight2DateTime as MyDate from Tbl_LoadMaterialDetails where LoadInID=1
) #tblTemp1) #TblTemp2)
Please help me o find a solution for this situation. I am in a real hurry.
Thanks in Advance
Vineesh
View 3 Replies
View Related
Mar 10, 2005
Does anyone know what this error message is telling me.
Thanks in advance everyone.
RB
View 2 Replies
View Related
Mar 24, 2008
I am trying to run a Common Table Expression (CTE) in SQL Server 2005 but I receive the error
'Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "ep.ProjectUID" could not be bound'.
What does this error mean?
My SQL is:
Code Snippet
WITH Tasks (TaskParentUID, TaskUID, ProjectName, TaskName, Level)
AS
(
SELECT et.TaskParentUID, TaskUID, ProjectName, TaskName,
0 AS Level
FROM dbo.MSP_EpmProject as ep
INNER JOIN dbo.MSP_EpmTask as et
ON ep.ProjectUID = et.ProjectUID
WHERE et.TaskParentUID = et.TaskUID
UNION ALL
SELECT et.TaskParentUID, et.TaskUID, ep.ProjectName, et.TaskName,
Level + 1
FROM dbo.MSP_EpmProject as ep
INNER JOIN dbo.MSP_EpmTask as et
ON ep.ProjectUID = et.ProjectUID
INNER JOIN Tasks AS t
ON et.TaskParentUID = t.TaskUID
)
SELECT t.TaskParentUID, t.TaskUID, ProjectName, t.TaskName, Level
FROM Tasks as t
INNER JOIN dbo.MSP_EpmTask as et
ON Tasks.TaskParentUID = et.TaskParentUID
WHERE Level = 0
The TaskParentUID has data-type of UniqueIdentifier and it's child is TaskUID which is also a UniqueIdentifier type. My goal of this CTE is to list all child TaskUIDs for each TaskParentUID in a recursive fashion.
View 7 Replies
View Related
Mar 15, 2008
this error messages appear when i execute this trigger
please help me
i make my graduation project
CREATE TRIGGER Insert_Contribution
ON Contributions
AFTER INSERT
AS
BEGIN
declare @error1 int,@error2 inT
BEGIN TRANSACTION
if(select Cash_OR_Account from Services,Contributions
where Services.S_ID=Inserted.S_ID)='A'
BEGIN
UPDATE Regular_Customers
SET Balance=Balance-inserted.amount
WHERE Services.Account_NO=Regular_Customers.Account_NO
AND Services.S_ID=Inserted.S_ID
SET @error1=@@ERROR
END
UPDATE Regular_Customers
SET Balance=Balance+inserted.amount
WHERE inserted.Account_NO=Regular_Customers.Account_NO
SET @error2=@@ERROR
IF @error1=0 AND @error2=0
BEGIN
COMMIT TRANSACTION
PRINT'Transaction Completed successfully'
END
ELSE
ROLLBACK TRANSACTION
SET NOCOUNT ON;
-- Insert statements for trigger here
END
GO
message
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 13
The multi-part identifier "Inserted.S_ID" could not be bound.
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16
The multi-part identifier "Services.Account_NO" could not be bound.
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16
The multi-part identifier "Services.S_ID" could not be bound.
Msg 4104, Level 16, State 1, Procedure Insert_Contribution, Line 16
The multi-part identifier "Inserted.S_ID" could not be bound.
View 2 Replies
View Related
Mar 11, 2008
Hi,We moved our stored procedure from sql 2000 to sql 2005 and we're getting few weird errors:Msg 4104. multi-part identifier /table.column/ could not be bound.Do we have to change anything in the stored procedure in order to make it work for sql 2005? Errors point to lines 25 and 68:25: IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))68: ELSEBelow is the code. Thanks in advance.set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[sp_refresh_GC_Contacts]ASDECLARE@dropSQL varchar(2000)BEGINSET NOCOUNT ON;--SET IDENTITY_INSERT GC_Contacts_Table ON-- drop the fulltext indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP FULLTEXT INDEX ON [dbo].[GC_Contacts] -- drop the unique indexIF EXISTS (SELECT * FROM sys.indexes WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts]') AND name = N'pk_gc_contacts')DROP INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] WITH ( ONLINE = OFF )-- If table exists truncate itIF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[GC_Contacts_Table]') AND type in (N'U'))BEGIN TRUNCATE TABLE [dbo].[GC_Contacts_Table]INSERT INTO [dbo].[GC_Contacts_Table] --insert sql next lineSELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name,Suffix, Company, JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State,PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address1 AS Address1,dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*-- IDENTITY(int, 1,1) AS GC_Contact_ID-- INTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDENDELSE BEGIN-- create the table from the querySELECT Title, FirstName AS First_Name, MiddleName AS Middle_Name, LastName AS Last_Name, Suffix, Company,JobTitle AS Job_Title, Email, PrimaryPhoneNumber AS Primary_Phone_Number, PrimaryAddress1 AS Primary_Address_1, PrimaryAddress2 AS Primary_Address_2, PrimaryAddress3 AS Primary_Address_3, PrimaryCity AS Primary_City, PrimaryState AS Primary_State, PrimaryZip AS Primary_Zip, PrimaryCountry AS CPrimary_ountry, Notes, Alias, FullName AS Full_Name,dbo.Addresses.Type AS AddressType, dbo.Addresses.Address2 AS Address2,dbo.Addresses.Address3 AS Address3, dbo.Addresses.City AS City, dbo.Addresses.State AS State,dbo.Addresses.Zip as Zipcode, dbo.Addresses.Country AS Country, dbo.Addresses.PhoneNumber AS PhoneNumber,dbo.Addresses.FaxNumber AS FaxNumber, SubAward_Only = CASE SubAwardOnlyWHEN 0 THEN 'No'WHEN 1 THEN 'Yes'END,dbo.ContactsSTUDF.*,IDENTITY(int, 1,1) AS GC_Contact_IDINTO dbo.GC_Contacts_TableFROM dbo.Contacts LEFT OUTER JOIN dbo.ContactAddresses ON dboContacts.ID = dboContactAddresses.ContactIDLEFT OUTER JOIN dbo.Addresses ON dbo.Addresses.ID = dboContactAddresses.AddressIDLEFT OUTER JOIN dbo.ContactsSTUDF ON dbo.Contacts.ID = dbo.ContactsSTUDF.EntityIDEND SET IDENTITY_INSERT GC_Contacts_table OFFSET ARITHABORT ONSET CONCAT_NULL_YIELDS_NULL ONSET QUOTED_IDENTIFIER ONSET ANSI_NULLS ONSET ANSI_PADDING ONSET ANSI_WARNINGS ONSET NUMERIC_ROUNDABORT OFF/****** Object: Index [pk_gc_contacts] Script Date: 10/11/2007 15:34:28 ******/CREATE UNIQUE CLUSTERED INDEX [pk_gc_contacts] ON [dbo].[GC_Contacts] ([GC_contact_id] ASC)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]-- add the fulltext indexCREATE FULLTEXT INDEX ON GC_Contacts([Title],[First_Name],[Middle_Name],[Last_Name],[Suffix],[Company],[Job_Title],[Email],[Primary_Phone_Number],[Primary_Address_1],[Primary_Address_2],[Primary_Address_3],[Primary_City],[Primary_State],[CPrimary_ountry],[Notes],[Alias],[Full_Name],[AddressType],[Address1],[Address2],[Address3],[City],[State],[Country],[PhoneNumber],[FaxNumber],[SubAward_Only])KEY INDEX pk_gc_contacts ON GCInquiryCatalogWITH CHANGE_TRACKING AUTOEND
View 3 Replies
View Related
Oct 12, 2015
I am doing migration from oracle11g to SQL server2012. Facing error while data migration from Oracle rowid dat typeto SQL uniqueidentifier using SSMA6.0
Errors: The given value of type String from the data source cannot be converted to type uniqueidentifier of the specified target column.
Refer above error.
View 2 Replies
View Related
Jul 22, 2014
I'm writing a query where I have multiple left-outer joins but I keep getting multi-part identifier error. See the query below?
SELECT gl.seg5 Natural
,gl.seg2 Office
,gl.seg3 Dept
,gl.seg4 Team
,gl.seg6 Sub
,gl.seg7 Tkpr
,gl.seg1 Comp
,'CHK' Source
[Code] ....
Errors
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.baid" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.cknum" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.ckline" could not be bound.
View 5 Replies
View Related
Jan 17, 2007
Im trying to execute following update SQL:
UPDATE Property SET ImageList = U.ImageList
FROM Property M
INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID
= U.FeedID
WHERE M.FeedID = ?
But following error:
[Execute SQL Task] Error: Executing the query " UPDATE Property SET
ImageList = U.ImageList FROM Property
M INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID
AND M.FeedID = U.FeedID WHERE M.FeedID = ?" failed with
the following error: "The multi-part identifier "M.FeedID" could
not be bound.". Possible failure reasons: Problems with the query,
"ResultSet" property not set correctly, parameters not set correctly,
or connection not established correctly.
ByPassPrepare is set to TRUE and ParameterName = 0 to variable User::Feed_ID
HOWEVER - following query executes fine:
UPDATE Property SET
ImageList = U.ImageList
FROM Property M
INNER JOIN RETS.dbo._Updates U ON M.ListingID = U.ListingID AND M.FeedID
= U.FeedID
WHERE M.FeedID = 11
Beats me - any help with explaining this to me
please?
View 7 Replies
View Related
Sep 11, 2013
I've made a Report porting from SS2008 to SS2008.
In a textbox I use a:
Number -> Custom Format
like these:
=Code.FormatString(Fields!NumDecRpt.Value)
but gives me the "Unrecognized identifier" red squiggle.
My FormatString function (in the rdl file) is this:
Public Shared Function FormatString(ByVal Decimals as object) As String
 dim format = "N0"
 if not (Decimals is nothing or Decimals is System.DBNull.Value) then
   dim decs as integer
   decs = Convert.ToInt32(Decimals)
   if decs>0 then
     format = "N"+decs.ToString()
   end if
 end if
 return format
End Function
What's wrong with this?
View 11 Replies
View Related
Jan 3, 2007
Hello,
Hope I'm asking this question in the correct forum.
I'm a newbie in Reporting Services and currently working my way through the tutorials with AdventureWorks. Came across this error while doing the MSDN tutorial for Advanced Features, lesson 5 - user defined functions.
http://msdn2.microsoft.com/en-us/library/aa337435.aspx
Created a new report, copied the following to the query screen:
SELECT udf.ContactID, udf.FirstName + N' ' + udf.LastName AS Name,
c.Phone, c.EmailAddress, udf.JobTitle, udf.ContactType
FROM ufnGetContactInformation(@ContactID) udf
JOIN Person.Contact c ON ufn.ContactID = c.ContactID
I'm following the directions to the letter, and consistently get the following error:
"The multi-part identifier "ufn.ContactID" could not be bound."
"The multip-part identifier "ufn.ContactID" could not be bound. (Microsoft SQL Server, Error: 4104)"
I'm running SQL 2005 Enterprise on Windows XP.
Any help you can give will be much appreciated! Thank you.
View 3 Replies
View Related
Jun 2, 2006
I was trying to copy child records of one parent record into another, and wanted to report back new child record id and corresponding child record id that was used to create it. I ran into run-time error with OUTPUT clause. Following is a script that will duplicate the situation I ran into:
CREATE TABLE Parent(
ParentID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
ParentName VARCHAR(50) NOT NULL)
GO
CREATE TABLE Child(
ChildID INT NOT NULL IDENTITY(1,1) PRIMARY KEY,
ParentID INT NOT NULL REFERENCES Parent(ParentID),
ChildName VARCHAR(50) NOT NULL)
GO
INSERT INTO Parent(ParentName) VALUES('Parent 1')
INSERT INTO Parent(ParentName) VALUES('Parent 2')
GO
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 1')
INSERT INTO Child(ParentID, ChildName) VALUES(1, 'Child 2')
GO
At this stage, there Child table looks like:
ChildID
ParentID
ChildName
1
1
Child 1
2
1
Child 2
What I want to do is copy Parent 1€™s children to Parent 2, and report back which source ChildID that was used to create the new child records. So I wrote the query:
DECLARE @LinkTable TABLE (FromChildID INT, ToChildID INT)
INSERT INTO Child(ParentID, ChildName)
OUTPUT c.ChildID, inserted.ChildID INTO @LinkTable
SELECT 2, c.ChildName
FROM Child c
WHERE c.ParentID = 1
SELECT * FROM @LinkTable
In the end I was expecting Child table to look like:
ChildID
ParentID
ChildName
1
1
Child 1
2
1
Child 2
3
2
Child 1
4
2
Child 2
and OUTPUT clause to return me:
FromChildID
ToChildID
1
3
Child record with ID 3 was created using ID of 1.
2
4
Child record with ID 4 was created using ID of 2.
But infact I€™m getting following error:
Msg 4104, Level 16, State 1, Line 9
The multi-part identifier "c.ChildID" could not be bound.
Any ideas on how to fix the OUTPUT clause in the query to return me the expected output?
Thanks
Yogesh
View 7 Replies
View Related
Sep 7, 2006
Hi chaps,
I have the following SQL query (SQL 2005).
Its basically retrieving some values using simple joins.
However there appears to be a problem with the LEFT OUTER JOIN:
"LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID)
"
When I try to compile the code i Get :
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "OrderLineItemTransaction.OrderLineItemTransactionI D" could not be bound.
Any help would be appreciated.
Cheers
Bal
SELECT
ord.orderDate,
cc.forename + ' ' + cc.surname person,
prod.description,
oli.noofitems,
deladdr.housenameno + ' ' + deladdr.addressLine1 + ' ' + deladdr.addressLine2 + ' ' + deladdr.city + ' ' + deladdr.postcode + ' ' + deladdr.county + ' ' + deladdr.country deladdress
FROM
product prod,
OrderLineItem oli,
[Order] ord,
OrderTransaction ordT,
OrderLineItemTransaction oliT,
CustomerContact cc,
Customer cust,
DDDispatchedOrder dd,
address deladdr,
address invaddr
LEFT OUTER JOIN DDDispatchedOrder ON (OrderLineItemTransaction.OrderLineItemTransaction ID = DDDispatchedOrder.OrderItemTransactionID)
WHERE
prod.productID = oli.productID:eek:
AND ord.orderID = oli.orderID
AND ord.orderID = ordT.orderID
AND oliT.orderlineitemID = oli.orderlineitemID
AND cc.customercontactID = ord.customercontactID
AND cc.customerID = cust.customerID
AND ord.invoiceaddressID = invaddr.addressID
AND ord.deliveryaddressID = deladdr.addressID
AND ordT.dispatchTypeID = 2
View 7 Replies
View Related
Sep 22, 2015
I have a field I am trying to bring into a SQL statement
,ISNULL(Convert(nvarchar(50),OPP1.OriginatingLeadId),'') AS 'OriginatingLeadId'
I get this error message
Conversion failed when converting from a character string to uniqueidentifier.
the field specs' originatingleadid is attached ....
View 9 Replies
View Related
Aug 25, 2015
When ever i tried to build a cube, i get stuck in this attribute relationship. either i shows a "yellow" icon in the hierarchy or "red" underline in the attribute column.I dont know how to rectify those errors.
View 2 Replies
View Related
Nov 18, 2008
I wrong a custom code in my report - Public shared Function Myfunc and in the header textbox - I tried to reference this code = Code.Myfunc.... the Myfunc gives an error Unrecognized identifier.The code is written in the report properties = Code Tab.
View 4 Replies
View Related
Apr 1, 2008
Hello, I get the following error when I run my package interactively. From the logs written out by the driver, it appears that all is working well as far as connecting to the data source and pulling data. It seems as if this error occurs when the DataReader source tries to process the received data.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, DataReader Source [1]: System.Data.Odbc.OdbcException: ERROR [42000] XML parse error at 162:1338: not well-formed (invalid token)
at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader, Object[] methodArguments, SQL_API odbcApiMethod)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader)
at System.Data.Odbc.OdbcCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Odbc.OdbcCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PreExecute()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPreExecute(IDTSManagedComponentWrapper90 wrapper)
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "DataReader Source" (1) failed the pre-execute phase and returned error code 0x80131937.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (691)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "MyPackage.dtsx" finished: Success.
I am not sure where to look next. Any help is much appreciated.
Dave
View 4 Replies
View Related
Apr 27, 2008
Hi everyone In my SqlServer Management Studio Express, on start up it shows the server type option, but greyed.So that value is fixed to database engine. ( I'm trying to work on an SqlServer Compact Edition database through the SSMStudiothat's why I'm trying to get this to change.)Besides, after I connect i go to the Object Explorer, expand the server node, and go to Replication.When i expand replication, i get the "Local Subscription" option, but nothng for Publication.( I want to work on Merge Replication, that's why I desparately need Publication to work)Am i missing something here? I did not install SqlServer separately, I only have what comes bundled with the Visual Studio 2005 Setup.
View 2 Replies
View Related
Feb 28, 2008
Hello,
We are migrating the SP from 2000 -> 2005, in my previous verriosn they are using WITH LOG option to store the error messges in to the Applicatin log and System log.When migrated to 2005 and I tried to run that i got error messgae like "Only System Administrator can specify WITH LOG option for RAISERROR command.".
Is there any possbility that without granting admin access to the developers that we can run this stored proceedure.
My DBAs dont want to provide the admin access to all developers to execute this SPs is there any work around for this problem.
please help me out.
suggest me if there any other ways to handle this situation.
I hope i will be answered by some one.
Thanks
Thanks
-----------------
Ram MCP
View 1 Replies
View Related
Jul 20, 2005
I?m getting an error when I execute a stored procedure which is try to insert a row to a table.The error is:Server: Msg 1934, Level 16, State 1, Procedure SRV_SP_IS_EMRI_SATIRI_EKLE, Line 32INSERT failed because the following SET options have incorrect settings: 'ANSI_NULLS.'.In my sp, I insert an row to a table. But also I created a view which is select some fields from this table.(Note: Some fields are calculated fields in this view. To see if calculated fields cause this error , I didnt selec calculated fields in the view, but I?m still getting this insert error.One more note: My indexed field is an identity field also.) I think, index causes this error. But I cant find my error.Thank you for your help...To do this view, I execute this code:drop view SRV_V_GARANTILI_IS_EMRI_SATIRLARI_TgoCREATE VIEW dbo.ViewTwith SCHEMABINDING ASSELECTS.FieldA,....S. FieldHFROMdbo.TABLE SWHERE(S.FieldA = 1) AND (S. FieldB IS NULL) AND (S.FieldH IN (0,1))goSET NUMERIC_ROUNDABORT OFFGOSET ANSI_PADDING,ANSI_WARNINGS,CONCAT_NULL_YIELDS_NULL ,ARITHABORT,QUOTED_IDENTIFIER,ANSI_NULLS ONGOcreate unique clustered index ViewT_IX_FieldA on ViewT (FieldA)go****************************************** This message was posted via http://www.sqlmonster.com** Report spam or abuse by clicking the following URL:* http://www.sqlmonster.com/Uwe/Abuse...d4cddba67ade8b6*****************************************
View 7 Replies
View Related
Mar 17, 2008
Hi,
I have set the option as required oon the sequence container and the tasks in it as supposrted ..it fails saying cannot acquire connection ..In all forums they are saying need to check system properties..but i sont have the right to do so
Is there any other alternative to provide a rol;lback on failure or handle this connection error without changing systme setting..
Please Help!!!!
View 4 Replies
View Related
Jun 10, 2005
I select the option execution from a report (it's in properties option) and then raise an error which says An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help EXECUTE permission denied on object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
View 29 Replies
View Related
Jan 24, 2007
Hi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
View 7 Replies
View Related