Invalid Column Name
Aug 25, 2006
Below is the T-SQL
SELECT ci.name,
ci.address,
CASE ISNULL(cci.geography,'')
WHEN 'P' THEN 'port'
WHEN 'A' THEN 'appt'
WHEN 'X' THEN 'xatt'
ELSE ''
END AS Link,
ci.InsuranceType
FROM dbo.Insurance ci
INNER JOIN dbo.Contract cci
ON ci.InsuranceId = cci.InsuranceId
AND cci.ContractId = 1266
ORDER BY
ci.Link,
ci.InsuranceType
===========================
My work environment is all in SQL SERVER 2005.
I have a problem with above T-SQL. There is an error while I run above code in Develoment Server.The error disappears when I put 'ci.Link' as 'Link' in OrderBy clause. My work environment has TEST, PRE-PRODUCTION and PRODUCTION. In all other environments the code runs fine with ci.Link but only in DEVELOPMENT the error persists. It has an error as 'Link is invalid column name'.
View 6 Replies
ADVERTISEMENT
Jan 15, 2008
ALTER procedure [dbo].[MyPro](@StartRowIndex int,@MaximumRows int)
As
Begin
Declare @Sel Nvarchar(2000)set @Sel=N'Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between ' + convert(nvarchar(15),@StartRowIndex) + ' and ('+ convert(nvarchar(15),@StartRowIndex) + '+' + convert(nvarchar(15),@MaximumRows) + ')-1'
print @Sel
Exec Sp_executesql @Sel
End
--Execute Mypro 1,4 --->>Here I Executed
Error
Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between 1 and (1+4)-1
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM
Procedure successfully created but giving error while Excuting'.
Please anybody give reply
Thanks
View 2 Replies
View Related
Mar 19, 2004
I get a Invalid Column Name ' '. with this procedure. Can anyone see what migh be wrong?
Thanks,
SELECT A.CompanyName,C.FirstName,C.LastName,C.Client_ID,
CASE WHEN A.[CompanyName] IS NULL OR A.[CompanyName] = '' THEN C.[FirstName] +" "+ C.[LastName] ELSE A.[CompanyName] END AS DRName, C.Client_ID
FROM tblClients C INNER JOIN tblClientAddresses A ON C.Client_ID = A.Client_ID
WHERE (C.Client_ID = 15057) AND (A.MailTo=1) AND Convert(varchar(5), GETDATE(), 10) BETWEEN Convert(varchar(5), A.Startdate, 10) AND Convert(varchar(5), A.Enddate, 10) OR (A.Startdate Is Null) AND (A.EndDate Is Null)
GO
View 3 Replies
View Related
Aug 19, 2004
Hi the following SP that causes an error.
CREATE PROCEDURE GetInfo
(
@MinPriceint=0,
@MaxPriceint=9999999999,
@TypeHomenvarchar(50)=NULL,
@Locationnvarchar(100)=NULL
)
AS
Declare @strSql nvarchar(255)
Set @strSql="Select * from table WHERE "
Set @strSql=@strSql + 'Price BETWEEN ' + CONVERT(nvarchar(20),@MinPrice) + ' and ' + CONVERT(nvarchar(20),@MaxPrice )
If @TypeHome != "No Preference"
Set @strSql=@strSql + ' and Type = ''' + @TypeHome+ ''''
If @Location != "No Preference"
Set @strSql=@strSql + ' and City = ''' + @Location+ ''''
Set @strSql=@strSql + ' and IDX = ''Y'' ORDER BY Price'
Exec(@strSql)
GO
The Error I get is:
"Error 207: Invalide Column Name 'Select * from table WHERE'
Invalid Column Name 'No Preference'
Invalid Column Name 'No Preference'
I have checked the table and the columns do exist, spelled correctly and caps are all the same. Also, this same SP in another table works just fine.
What is causing this error?
Thanks in advance!
View 1 Replies
View Related
Feb 16, 2001
Can anyone tell me why I get the above message using the following stored procedure and passing in a value of 120:
CREATE Procedure qryAnalysisCountMain
(@WizardGroup1Question int)
As
EXEC("SELECT QuestionDescription FROM Questions WHERE QuestionCode = " + @WizardGroup1Question)
120 just happens to be the asci value of 'x' and whatever number I pass in gets converted into it's character equivalent and the sp tells me it can't find that column name. QuestionCode is an int field so there is no problem there
The procedure works OK with:
SELECT QuestionDescription FROM Questions WHERE QuestionCode = @WizardGroup1Question
However I need the SQL in an EXEC as the sp will eventually be dynamic so that i can pass in the name of the table to select from.
Thanks
Martin
View 1 Replies
View Related
Mar 30, 2004
Hi
I have a dynamic select statement which is showed below.
declare @query varchar(100)
set @query = 'select * from undergraduate where Gender =' + @Gender
exec (@query)
//
When I execute the @query, I get an error message like "Invalid Column Name Male".
I think I need to put a single quotation around the dynamic variable, so that I have
select * from undergraduate where Gender ='Male'. But I am not sure how to do that.
Thank you for your help!!
View 3 Replies
View Related
May 6, 2008
Hello All,
I m facing problem in one query. What I did is
SELECT
PRODUCT_ID,
PRODUCT_END_DATE,
CASE
WHEN PRODUCT_ID = 1 THEN DATEADD(YY,-5,PRODUCT_END_DATE)
WHEN PRODUCT_ID = 2 THEN DATEADD(YY,-10,PRODUCT_END_DATE)
WHEN PRODUCT_ID = 3 THEN DATEADD(YY,-15,PRODUCT_END_DATE)
END AS MODIFIED_END_DATE
FROM PRODUCTS
WHERE MODIFIED_END_DATE BETWEEN '2008-04-01' AND '2008-04-30'
when I execute this query returns an error as
Invalid column name MODIFIED_END_DATE
So how can I write this query? any idea.
Thanks in advance.
--kneel
View 3 Replies
View Related
Jun 16, 2008
I have my column names right but its telling me they are invalid. It must be something to do with how I have my subquery formatted but I don't see it. I was wondering if anyone else can see it? It tells me payer_id is not right and I know its coming from the bolded section. I just added that line to do some additional grouping. I know that the query above aliased as D was working before I put the bolded line in. Am I setting this up wrong?
select distinct c.description,tmp.person_id,tmp.person_nbr,tmp.first_name,
tmp.last_name,tmp.date_of_birth,d.payer_name,b.create_timestamp
from PersonMIA tmp
join person a on a.person_id = tmp.person_id
join patient_encounter b on a.person_id = b.person_id
join provider_mstr c on b.rendering_provider_id = c.provider_id
cross apply(select top 1 payer_name
from person_payer
where person_id = tmp.person_id
order by payer_id) d
join payer_mstr e on d.payer_id = e.payer_id
join mstr_lists f on e.financial_class = f.mstr_list_item_id
where c.description = 'Leon MD, Enrique'
group by c.description,tmp.person_id,tmp.person_nbr,tmp.first_name,tmp.last_name,
tmp.date_of_birth,d.payer_name,b.create_timestamp
)tmp2
where year(create_timestamp) IN (2005,2006)
group by person_nbr,payer_name,first_name,last_name,description,create_timestamp
Thanks in Advance!
Sherri
View 2 Replies
View Related
Mar 26, 2006
I am building a query and thought I had completed it but I get 'Invalid Column Name "A1" when I run it?
SELECT
Groups.GroupID,
Sum(Stages_On_Route.Distance) AS Miles_Covered,
Groups.Group_Name
FROM Groups
INNER JOIN ((Route INNER JOIN Departure ON (Route.GroupID=Departure.GroupID)
AND (Route.RouteID=Departure.RouteID))
INNER JOIN Stages_On_Route ON Route.RouteID=Stages_On_Route.RouteID)
ON Groups.GroupID=Departure.GroupID
GROUP BY Groups.GroupID,
Groups.Group_Name
HAVING (((Groups.GroupID)="A1"));
View 6 Replies
View Related
Dec 4, 2007
Hi I'm new to this forum and I seem to be having a basic problem. I have moved from using MS Access to SQL Server and I seem to be having problem with the SQL below.
SELECT Table_A.*, (Statement_A) AS Value_A ,
(Value_A + 4) AS Value_B
FROM Table_A
I keep on getting an error stating invalid column name, I know that statement A is fine because when I move the calculation into Value_B it works.
Can anyone tell me what I am doing wrong?
View 4 Replies
View Related
Jul 20, 2005
When I try to add the line . . .CPM * MOU AS COST,after all the CASE lines I get the response in SQL Query Analyser,Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'CPM'.Is it because I can not do this on this particular query since CPM isyet to be defined or do I just need to rephrase the request anotherway?The query now looks like this. . .SELECT DISTINCTDATA.dbo.[2004_JANUARY_SUM].RATEKEY,DATA.dbo.[2004_JANUARY_SUM].[DATE],DATA.dbo.[2004_JANUARY_SUM].CXRKEY,DATA.dbo.[2004_JANUARY_SUM].Area,DATA.dbo.[2004_JANUARY_SUM].Region,DATA.dbo.[2004_JANUARY_SUM].Market,DATA.dbo.[2004_JANUARY_SUM].AKA,DATA.dbo.[2004_JANUARY_SUM].MARS_NAME,DATA.dbo.[2004_JANUARY_SUM].O_MTA,DATA.dbo.[2004_JANUARY_SUM].O_MTA_NAME,DATA.dbo.[2004_JANUARY_SUM].O_STATE,DATA.dbo.[2004_JANUARY_SUM].O_LATA,DATA.dbo.[2004_JANUARY_SUM].O_LATA_NAME,DATA.dbo.[2004_JANUARY_SUM].MSC_CLLI,DATA.dbo.[2004_JANUARY_SUM].Trunk,DATA.dbo.[2004_JANUARY_SUM].Carrier,DATA.dbo.[2004_JANUARY_SUM].NPA_NXX,DATA.dbo.[2004_JANUARY_SUM].CALLS,DATA.dbo.[2004_JANUARY_SUM].MOU,DATA.dbo.[2004_JANUARY_SUM].TANDEM,DATA.dbo.[2004_JANUARY_SUM].T_MTA,DATA.dbo.[2004_JANUARY_SUM].T_MTA_NAME,DATA.dbo.[2004_JANUARY_SUM].T_STATE,DATA.dbo.[2004_JANUARY_SUM].T_LATA,DATA.dbo.[2004_JANUARY_SUM].[RC ABBRE],DATA.dbo.[2004_JANUARY_SUM].RC_ID,DATA.dbo.[2004_JANUARY_SUM].SWITCH,DATA.dbo.[2004_JANUARY_SUM].[OCN],DATA.dbo.[2004_JANUARY_SUM].[OCN_NAME],DATA.dbo.[2004_JANUARY_SUM].[CATEGORY],CASE WHEN SUBSTRING(DATA.dbo.[2004_JANUARY_SUM].[MSC_CLLI], 5, 2) =DATA.dbo.[2004_JANUARY_SUM].[T_STATE] THEN(CASE WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR4' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_GXWHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR3' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_VENDOR3WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR2' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_VENDOR2WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR1' THENTELECOM.DBO.DOMESTIC_LD_RATES2.[INTRA_VENDOR1]ELSE TELECOM.DBO.DOMESTIC_LD_RATES2.INTRA_TANDEMEND)ELSE(CASE WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR4' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTER_GXWHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR3' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTER_VENDOR3WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR2' THENTELECOM.DBO.DOMESTIC_LD_RATES2.INTER_VENDOR2WHEN DATA.dbo.[2004_JANUARY_SUM].[CARRIER] = 'VENDOR1' THENTELECOM.DBO.DOMESTIC_LD_RATES2.[INTER_VENDOR1]ELSE TELECOM.DBO.DOMESTIC_LD_RATES2.INTER_TANDEMEND)END AS CPM,CPM * MOU as [COST]INTO TEST.dbo.[2004_JANUARY_RATES]FROM DATA.dbo.[2004_JANUARY_SUM] LEFT OUTER JOINTELECOM.dbo.DOMESTIC_LD_RATES2 ONDATA.dbo.[2004_JANUARY_SUM].RATEKEY =TELECOM.dbo.DOMESTIC_LD_RATES2.RATEKEYORDER BY DATA.dbo.[2004_JANUARY_SUM].[T_LATA] DESCOPTION (MAXDOP 2)
View 1 Replies
View Related
May 9, 2008
Is there not a way to perform a calculation on a column comprised from a Case Function?
This is my query:
SELECT
'ComparativeValue' =
CASE
WHEN Id = 1 THEN Index
WHEN Id = 2 THEN Peers
WHEN Id = 3 THEN PrevYear
END,
Variance = (Base - ComparativeValue)/ComparativeValue
FROM Table
I get this error when trying to execute the query:
Invalid column name 'ComparativeValue'.
View 7 Replies
View Related
Nov 7, 2007
I need to identify where this column could be, I have checked in the syscolumns but did not find it as a result I am now having to manually check each view and sp that could use the column so I can transfer the database to my new SQL 2005 machine.
Is there an easier way to identify this coloumn by some sort of search??
View 6 Replies
View Related
May 16, 2008
Hi,
Can I write parameter name like shown below?
Code Snippet
SELECT 'N' AS LiquidatingFlag, Report, RptSection, Portfolio, RepExcRsn, Units,
FROM Exc_SummaryData_Custom
WHERE (Report IN (@Report)) AND (Portfolio IN (@Portfolio)) AND ( LiquidatingFlag IN(@LiquidatingFlag))
UNION ALL
SELECT 'R' AS LiquidatingFlag, Report, RptSection, Portfolio, RepExcRsn, Units,
FROM Exc_SummaryData_Custom_LIQ
WHERE ( Report IN (@Report)) AND (Portfolio IN (@Portfolio)) AND ( LiquidatingFlag IN (@LiquidatingFlag))
I get a error message saying invalid column name LiquidatingFalg.
(Actually there is no clumn in the original table)Can any one help to work this correctly?
View 5 Replies
View Related
Nov 15, 2007
Hi I have the following problem. I am trying to get some data from a database which matches the name in a session from a previous page:e.g. SqlCommand menubar = new SqlCommand("Select pernme from Person where pernme = " + (string)Session["tbname"], sqlConn); SqlDataAdapter dataAdapter5 = new SqlDataAdapter(); dataAdapter5.SelectCommand = menubar; DataSet dataSet5 = new DataSet(); dataAdapter5.Fill(dataSet5); DataTable selcartest4 = dataSet5.Tables["table"]; if (selcartest4.Rows.Count != 0)The session is called tbname and in that session is a users name however insetad of doing the nornal thing and retrieving the data in the sql database table matching that name it comes up with the following error message:System.Data.SqlClient.SqlException: Invalid column name 'jamie'this is weird as the 'jamie' is the name in the session from the previous page and in fact not a column name at all the column name is pernme I am totally stuck any help would eb great thanksJ
View 2 Replies
View Related
Dec 19, 2007
When i try to execute i receive following error:
Msg 207, Level 16, State 1, Procedure WedstrijdDeelnemersSelectAllMPNietGoedgekeurd, Line 85
Invalid column name 'Ploeg'.
I dont really see whats wrong with the select... it works fine in the 2 first parts of the querryALTER PROCEDURE [dbo].[WedstrijdDeelnemersSelectAllMPNietGoedgekeurd]
-- Add the parameters for the stored procedure here
@WedstrijdID int
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
...
UNION
SELECT
dbo.fncGetPersoonNaam(L.PersoonID,0) as Persoon,
'Ploeg: ' + WDPI.Ploeg as TypeInschrijving,
WDPIL.LidClubID,
WT.Omschrijving as WedstrijdType,
C.Omschrijving as Categorie,
WDC.WedstrijdDetailID,
WDC.ID as WedstrijdDetailCategorieID,
WDPI.ID as TypeInschrijvingID
FROM
Wedstrijd W
INNER JOIN WedstrijdDetail WD ON W.ID = WD.WedstrijdID
INNER JOIN WedstrijdType WT ON WD.WedstrijdTypeID = WT.ID
INNER JOIN WedstrijdDetailCategorie WDC ON WD.ID = WDC.WedstrijdDetailID
INNER JOIN Categorie C ON WDC.CategorieID = C.ID
INNER JOIN WedstrijdDetailPloegInschrijving WDPI ON WDC.ID = WDPI.WedstrijdDetailCategorieID
INNER JOIN WedstrijdDetailPloegInschrijvingLid WDPIL ON WDPIL.WedstrijdDetailPloegInschrijvingID = WDPI.ID
...END
View 1 Replies
View Related
Jul 11, 2004
Hello all,
Does anyone see anything wrong with the sql query below
DECLARE @BUILDINGLIST nvarchar(100)
SET @BUILDINGLIST = 'ALABAMA'
DECLARE @SQL nvarchar(1024)
SET @SQL = 'SELECT id, CLOSED, building AS BUILDING FROM
requests WHERE building = (' + @BUILDINGLIST + ')'
EXEC sp_executesql @SQL
I keep on getting the following error:
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'ALABAMA'.
Thanks in advance.
Richard M.
View 2 Replies
View Related
Jul 30, 2004
Hello,
I have a problem with my Update sql server command. The error message is strange :
System.Data.SqlClient.SqlException: Invalid column name 'CMD_DATE_ORDER'. Invalid column name 'CMD_REF_CLIENT'. at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior,
RunBehavior runBehavior, Boolean returnStream) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at ASP.addorder_aspx.MasterGrid_Update(Object Sender, DataGridCommandEventArgs E)
in C:Inetpubwwwrootproject1addorder.aspx:line 157
On line 157 I have :
UpdateCommand.ExecuteNonQuery()
The Update code :
Sub MasterGrid_Update(Sender As Object, E As DataGridCommandEventArgs)
' update the database with the new values
' get the edit text boxes
Dim dateCom As String = CType(e.Item.FindControl("dateCom"), TextBox).Text
Dim NumBon As String = CType(e.Item.FindControl("NumBon"), TextBox).Text
Dim NomDest As String = CType(e.Item.FindControl("NomDest"), TextBox).Text
Dim NovoieDest As String = CType(e.Item.FindControl("NovoieDest"), TextBox).Text
Dim nomvoieDest As String = CType(e.Item.FindControl("nomvoieDest"), TextBox).Text
Dim cpDest As String = CType(e.Item.FindControl("cpDest"), TextBox).Text
Dim villeDest As String = CType(e.Item.FindControl("villeDest"), TextBox).Text
Dim paysDest As String = CType(e.Item.FindControl("paysDest"), TextBox).Text
Dim telDest As String = CType(e.Item.FindControl("telDest"), TextBox).Text
Dim dateExp As String = CType(e.Item.FindControl("dateExp"), TextBox).Text
Dim myConnection As New SqlConnection(strConnect)
Dim UpdateCommand As SqlCommand = new SqlCommand()
UpdateCommand.Connection = myConnection
' Add to CLIID_LGN the selected value in the DropDownList
Dim cliid As String
cliid = Trim(DDL.SelectedItem.Value)
If AddingNew = True Then
UpdateCommand.CommandText = "INSERT INTO Commandes (CMD_DATE_ORDER, CMD_NUM_BON_ORDER, CMD_NOM_DEST, CMD_NOVOIE_DEST, CMD_NOMVOIE_DEST, CMD_CP_DEST, CMD_VILLE_DEST, CMD_PAYS_DEST, CMD_TEL_DEST,
CMD_DATE_EXPED, CMD_REF_CLIENT) VALUES ('" & dateCom & "','" & NumBon & "','" & NomDest & "','" & NovoieDest & "','" & nomvoieDest & "','" & cpDest & "','" & villeDest & "','" & paysDest & "','" & telDest & "',
'" & dateExp & "', '" & cliid & "')"
Else
UpdateCommand.CommandText = "UPDATE Client SET CMD_DATE_ORDER=@dateCom, CMD_NUM_BON_ORDER = @NumBon, CMD_NOM_DEST = @NomDest, CMD_NOVOIE_DEST = @NovoieDest, CMD_NOMVOIE_DEST = @NomvoieDest,
CMD_CP_DEST = @cpDest, CMD_VILLE_DEST = @villeDest, CMD_PAYS_DEST = @paysDest, CMD_TEL_DEST = @telDest, CMD_DATE_EXPED = @dateExp WHERE CMD_REF_CLIENT = '" & cliid & "'"
End If
UpdateCommand.Parameters.Add("@dateCom", SqldbType.SmallDateTime, 4).Value = Trim(dateCom)
UpdateCommand.Parameters.Add("@NumBon", SqldbType.NVarChar, 10).Value = Trim(NumBon)
UpdateCommand.Parameters.Add("@NomDest", SqldbType.NVarChar, 50).Value = Trim(NomDest)
UpdateCommand.Parameters.Add("@NovoieDest", SqldbType.NVarChar, 5).Value = Trim(NovoieDest)
UpdateCommand.Parameters.Add("@nomvoieDest", SqldbType.NVarChar, 80).Value = Trim(nomvoieDest)
UpdateCommand.Parameters.Add("@cpDest", SqldbType.NVarChar, 5).Value = Trim(cpDest)
UpdateCommand.Parameters.Add("@villeDest", SqldbType.NVarChar, 35).Value = Trim(villeDest)
UpdateCommand.Parameters.Add("@paysDest", SqldbType.NVarChar, 35).Value = Trim(paysDest)
UpdateCommand.Parameters.Add("@telDest", SqldbType.NVarChar, 14).Value = Trim(telDest)
UpdateCommand.Parameters.Add("@dateExp", SqldbType.SmallDateTime, 4).Value = Trim(dateExp)
' execute the command
Try
myConnection.Open()
UpdateCommand.ExecuteNonQuery()
Catch ex as Exception
Message.Text = ex.ToString()
Finally
myConnection.Close()
End Try
' Resort the grid for new records
If AddingNew = True Then
MasterGrid.CurrentPageIndex = 0
AddingNew = false
End If
' rebind the grid
MasterGrid.EditItemIndex = -1
BindMasterGrid()
End Sub
I have send a response.write instruction : the values are all good.
In the sql server database, the syntax of this 2 fields CMD_DATE_ORDER and CMD_REF_CLIENT are good.
Can you help me for this problem ?
Thanks.
View 4 Replies
View Related
Aug 18, 2004
Hi,
I have the following query
"SELECT Test_Question.Question_ID, Test_Question.Grade_Number as GNum, Test_Question.Question_Number as QNum, Question.Question_Text as QText , Answer.Answer_Number as AnsNum, Answer.Answer_Text as AnsTxt, Answer.ID AS Ans_ID FROM Test_Question, Question, Answer WHERE Test_Question.Active=1 AND Test_Question.Question_ID = Question.ID AND Test_Question.Deleted=0 and Test_Question.Test_Detail_ID ="+ currPTestId +" AND Question.ID = Answer.Question_ID GROUP BY Test_Question.Question_ID ORDER BY Test_Question.Question_Number, Test_Question.Question_ID, Answer.Answer_Number";
But I get an exception column Test_Question.Grade_Number is invalid in the select list because it is not contained in either an aggregate function or the group by clause.
Could some one point out what is the problem in the above query.
thanks in advance
shail
View 1 Replies
View Related
Mar 26, 2006
I am trying to develop this query in MSSQL but am having a problem with the syntax.
I don't know why but the query is breaking on 'Invalid Column Name A1'.
Here is my query.
Code:
SELECT
Groups.GroupID,
Sum(Stages_On_Route.Distance) AS Miles_Covered,
Groups.Group_Name
FROM Groups
INNER JOIN ((Route INNER JOIN Departure ON (Route.GroupID=Departure.GroupID)
AND (Route.RouteID=Departure.RouteID))
INNER JOIN Stages_On_Route ON Route.RouteID=Stages_On_Route.RouteID)
ON Groups.GroupID=Departure.GroupID
GROUP BY Groups.GroupID,
Groups.Group_Name
HAVING (((Groups.GroupID)="A1"));
View 1 Replies
View Related
Feb 25, 2005
The following is an approximation of the code I'm trying:
SELECT 'dummy' as DummyField, FieldA, FieldB, FieldC,
FieldD, FieldE, FieldF, FieldG, FieldH, FieldI,
FieldJ, FieldK, FieldL, AVG(AMT) AS AMT,
AVG(QTY) AS QTY, FieldM
FROM GetMonthlyData('200501') as i
GROUP BY DummyField, FieldA, FieldB, FieldC,
FieldD, FieldE, FieldF, FieldG, FieldH, FieldI,
FieldJ, FieldK, FieldL, FieldM
It checks out OK syntactically but whenever I try to run it I get a message like the following:
Server: Msg 207, Level 16, State 3, Line 1
Invalid column name 'DummyField'.
Server: Msg 207, Level 16, State 1, Line 1
Invalid column name 'DummyField'.
I've also tried not giving DummyField an alias and using the 'dummy' value in the GROUP BY clause but that won't even get by the CheckMark button:
Server: Msg 164, Level 15, State 1, Line 8
GROUP BY expressions must refer to column names that appear in the select list.
:confused: Advice?
View 8 Replies
View Related
Nov 29, 2006
Hi all and I appreciate any help
I recently been assigned to a project that has an ms-access front end and sql server 2000 sp4 as the database engine.
The database was replicated (merge replication) but for some reason they drop replication and when they tried to put it back on they got allot of problems and so they paused it.
My task now is to make it work again. After allot of reading I desided to clean the database and start from the beginning. Using some scripts and instructions on a copy of the database I cleaned all the tables related to merge replication but when I went back to ms-access to update a record I got an error
"invalid column name 'rowguid'" . I checked all my tables in my database but I find not such column as it was dropped using the scripts.
Any ideas that I can use?
Thanks allot,
George
View 1 Replies
View Related
Dec 12, 2014
This is my syntax, I have removed then added back line by line by line and determined it is the insert of the variable into the table that skews.
Code:
Create Table #Table1 (ID Int Identity, p nvarchar(20))
Create Table #Table2 (date datetime, salesID int, p varchar(20))
Insert into #Table1 Values ('ZeroWireless')
Declare @Str nvarchar(4000), @p nvarchar(20)
Select @p = p
From #Table1
[code]....
View 3 Replies
View Related
Oct 2, 2005
The reference to QReceived below in the QUsageQty line gives me an error: Invalid Column Name 'QReceived'. Is there a way to reference that field?
SELECT
MEND.ProductID,
MEND.MEPeriod,
MEND.OpeningQty,
QOpenCost = MEND.OpeningDols / MEND.OpeningQty,
(SELECT Sum(UsageQty) FROM tblShipmentHdr SHPH WHERE MEND.ProductID = LEFT(SHPH.ProductID,7) And
DATEADD(mm, DATEDIFF(mm,0,SHPH.ReceivedDate), 0) = MEND.MEPeriod GROUP BY LEFT(SHPH.ProductID,7)) AS QReceived,
QUsageQty = MEND.OpeningQty + QReceived - MEND.ClosingQty,
PROD.ProductName
FROM tblMonthend MEND
LEFT OUTER JOIN dbo.tblProducts as PROD ON MEND.ProductID = PROD.ProductID
WHERE (MEND.MEPeriod =''' + convert(varchar(40),@XFromDate,121) + ''')
View 4 Replies
View Related
Jul 20, 2005
Hi,I'am trying a very simple sql statement but it does not work.I use the SQL version 8.0I use the "Northwind" sample database and the Table "Employees".The sql statement is:SELECT * From Employees Where City = "London"The returned message is:Server: Msg 207, Level 16, State 3, Line 1Invalid column name 'London'.Can somebody tell me what could be wrong?Greetings,Steven de Vries
View 3 Replies
View Related
Nov 29, 2006
Hi all,
I'm new to replication and database management so I will like some understanding and guiding as this is a new task for me.
I was given a copy of a database with merge replication on it and doing allot of reading and using some scripts I cleaned replication (or so Im thinking) and tryed to use it again on the ms-access front end. When I try to update some data I get "invalid column name 'rowguid'" , but no such column exist in my database as it was dropped.
Any help on this?
thanks George.
View 10 Replies
View Related
Feb 23, 2007
I'm trying to set up a merge publication in MSSQL 2005 SP1.
I have a database which I have successfully made into a merge publication. When I run the snapshot agent, several articles are processed successfully, then I encounter an error with the following: Invalid column name 'rowguid'
Note that none of the tables contain 'rowguid' columns before this process - I let MSSQL automatically create these as needed.
The replication monitor details the following error:
Error messages:
· Message: Invalid column name 'rowguid'.
Command Text: sp_MSpublicationview
Parameters: @publication = RelMS Publication
Stack: at Microsoft.SqlServer.Replication.AgentCore.ReMapSqlException(SqlException e, SqlCommand command)
at Microsoft.SqlServer.Replication.AgentCore.AgentExecuteNonQuery(SqlCommand command, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate, Int32 queryTimeout)
at Microsoft.SqlServer.Replication.AgentCore.ExecuteDiscardResults(CommandSetupDelegate commandSetupDelegate)
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.MakePublicationViews()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoRegularMergeSnapshotPreparations()
at Microsoft.SqlServer.Replication.Snapshot.MergeSnapshotProvider.DoPreArticleFilesGenerationProcessing()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: MSSQLServer, Error number: 4615)
Get help: http://help/4615
· Server [XXXXXXXXXX], Level 16, State 1, Procedure , Line 1
Invalid column name 'rowguid'. (Source: MSSQLServer, Error number: 4615)
Get help: http://help/4615
Can anyone shed further light on this?
Thanks.
View 9 Replies
View Related
Oct 4, 2007
Hello,
I had been developing a SSIS package for a couple of days, when I decided to do some changes to the underlying destination table. I removed a column, deleted another and renamed a couple of columns. I havent been able to execute a package on that table after that simple maneuver. I have refreshed all available transformations component but no luck. SSIS still gives me the error message below. And there are no yellow exclamation marks in the project.
I tried to isolate the problem even more by creating a new and clean Integration Services project, adding components that perform an update if the record exists in the destination table or an insert if the record is new. No success. The Oled Db Command is still complaining about columns that no longer exists in the destination table. How can deleted columns that don't exist when the project was created be referenced in the new project?
Any user input that helps me solve this problem is appreciated.
What are the best practises for making changes to the database structure, and not break the SSIS package?
[OLE DB Command [2236]] Error: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileID'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileName'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryName'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileID'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryDomicileName'.".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Invalid column name 'CountryName'.".
Thanks,
Mikael
View 3 Replies
View Related
Jun 8, 2004
While I'm sure I'm missing something very stupid here.... I cannot get this sproc to run successfully. I get "Error 207: Invalid Column Name tbl_images.imgID". Yes that column exists in that table, and it's case is exactly the same as what I have in the select text.
I'm baffled, any help would be great thanx!
CREATE PROCEDURE spImagesbyCategory
@categoryID varchar
AS
SELECT
tbl_products.catalogID,
tbl_products.cname,
tbl_products.cprice,
tbl_products.cdescription,
tbl_products.categoryID,
tbl_products.category,
tbl_images.catalogID,
tbl_images.imgID,
tbl_images.imgFileName
FROM tbl_products
LEFT JOIN (SELECT catalogID, MIN(imgFileName) AS imgFileName FROM tbl_images GROUP BY catalogID) tbl_images ON tbl_products.catalogID = tbl_images.catalogID
WHERE tbl_products.categoryid Like '%' + @categoryid + '%'
ORDER BY tbl_images.imgID DESC
GO
View 11 Replies
View Related
Jun 16, 2003
When I try to import a Pervasive table into SQL Server 2K, I get the error msg of 'Invalid column number'.
Is that because SQL Server cant handle more than 1024 columns ?
I think my Pervasive table has more than 2000 columns
Thanks in advance
View 5 Replies
View Related
Jun 13, 2005
Hey all,
Having some trouble with a Database email system I created. The system consists of two tables, DATA_ELEMENT and EMAIL_MESSAGE. So the email message body and recipient fields may contain substitution macros such as {![CUST_EMAIL]!}. The CUST_EMAIL data element row then stores the SELECT, FROM and WHERE clauses separately. There is a stored proc to search the message body and recipients for these substitution macros and replace them with the appropriate values from the DB.
The system is working well except I have one particular substitution macro called VENUE_NAME_BY_PPPID which is causing a problem.
Quote: Server: Msg 207, Level 16, State 3, Line 3
Invalid column name 'PARTNER_PRODUCT_PRIZE_ID'.
And here's the query which is creates this error (without the escaped single quotes):
Code:
SELECT P.PARTNER_NAME + ISNULL(' - ' + PS.SITE_NAME, '')
FROM PARTNER_PRODUCT_PRIZE PPP
JOIN PARTNER_PRIZE PP ON PP.PARTNER_PRIZE_ID = PPP.PARTNER_PRIZE_ID
JOIN PARTNER P ON P.PARTNER_ID = PP.PARTNER_ID
LEFT JOIN PARTNER_SITE PS ON PS.PARTNER_ID = PP.PARTNER_ID
AND PS.PARTNER_SITE_ID = PP.PARTNER_SITE_ID
WHERE PPP.PARTNER_PRODUCT_PRIZE_ID = '19'
And just after this print statement, the query is executed with sp_executesql()
Any advice is greatly appreciated as this query runs fine when I execute from the query window. However, if I escape all the necessary quotes, I can't get it to run when I put the string inside of sp_executesql().
--Travis
View 1 Replies
View Related
May 13, 2013
I'm working in SQL2000 sp4. I've built a simple database to take snapshots from three ERPSs that contain related data and then analyse them to look for non-conforming records (items that are flagged differently between two systems, cost conversion errors, etc). The DTS packages all work fine, and suck the records out of the main systems without a problem.
For info, the DTS packages all work in the same way:
Purge a holding table
Connect to the source ERPS
Populate the holding table via a SELECT statement
Invoke a stored proc to make the required changes in the main table
Similarly, the stored procs all work in the same way: Add records from the holding table to the main table that aren't already there.
Update any records common to both: If there's a record date field, have been updated in the holding table more recently. Otherwise, match on key fields and differ on detail fields. Delete records from the main table that aren't in the holding table
The trouble started when I modified two of the tables to include the data that the record was last amended in the source ERPS. When I tried to incorporate this new column into the relevant stored proc, performing a syntax check resulted in error 207 - invalid column name.
I did some checking, and found out that stored procs tend to rely on what the table looked like when the proc was created, rather than what it now looks like. Accordingly, I tried creating a new proc. I got the same result. What have I missed?
View 8 Replies
View Related
Jan 23, 2015
Error Message "invalid column name on total_counter ". How to edit this query and make it work ?
SELECT salesman_code,user_group,user_name,trx_acc_amt,trx_date,trx_no,sh_code,
salesman_code4,salesman_code5,salesman_code6,
Sum(case when salesman_code4 is null then 0 else 1 end +
case when salesman_code5 is null then 0 else 1 end +
case when salesman_code6 is null then 0 else 1 end) as total_counter,
[code]...
View 5 Replies
View Related
