Invalid Object Name '#TmpTable' Whenselecting From Temporary Table Made Using INTO From Exec(@str)
Apr 8, 2008
Hello,
Can anyone shed some light on why the following:
declare @str varchar(2000)
set @str = 'SELECT * INTO #TmpTable FROM FormHistory'
exec (@str)
SELECT * FROM #TmpTable
gives the following error:
Invalid object name '#TmpTable'.
This is a very cutdown version of what I am trying to achieve so it might not seem obvious why I am writing it into a string and using exec but in the real code I do need to do this. I have cut it right back to try to get to the bottom of why this doesn't work. I suspect the # in the string is causing the problems.
In the Operating environment databases, may be made tables in the database on a temporary basis but they are still yet and they are not removed, how to identify tables that have been made on a temporary basis are not used (don’t have any read & write records)?
I have a database owned by the sa. In the database are some tables owned by id1. When I login via SQL Analyzer as id1 and try to select from the tables owned by id1, I get an error message 208 that the object does not exist. If I query 'select * from id1.table', I get my data. I thought that if I owned the table I could always access it. Additional facts, id1 is defined as a login, id1 is defined as a user for the database with db_owner role. Any ideas? Thanks, Jen
In the Operating environment databases, may be made tables in the database on a temporary basis but they are still yet and they are not removed, how to identify tables that have been made on a temporary basis are not used (don’t have any read & write records)?Â
Hello,I am getting a SqlException with title "SqlException was unhandled by user code" and then it says "Invalid object name 'Access Table'.here is my code (this is from my login page:)<script runat="server">
Protected Sub Login1_Authenticate(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.AuthenticateEventArgs)
Dim conn As SqlConnection Dim cmd As SqlCommand Dim cmdString As String = "SELECT [Password] FROM [AccessTable] WHERE" & _ " (([Username] = @Username) AND ([Password] = @Password))"
conn = New SqlConnection("Data Source=GDB03SQL;Initial Catalog=GDBRemitance;Persist Security Info=True;User ID=remitance;Password=remitance") cmd = New SqlCommand(cmdString, conn) cmd.Parameters.Add("@Username", SqlDbType.VarChar, 50) cmd.Parameters("@Username").Value = Me.Login1.UserName cmd.Parameters.Add("@Password", SqlDbType.VarChar, 50) cmd.Parameters("@Password").Value = Me.Login1.Password conn.Open() Dim myReader As SqlDataReader myReader = cmd.ExecuteReader(CommandBehavior.CloseConnection) If myReader.Read() Then FormsAuthentication.RedirectFromLoginPage(Me.Login1.UserName, False) Else Response.Write("Invalid credentials") End If myReader.Close()
End Sub </script> The error is comming from the myReader = cmd.Execute(CommandBehavior.CloseConnection)Thanks for any suggestions or ideas.
I am trying to execute a stored procedure to update a table and I am getting Invalid Object Name. I am create a cte named Darin_Import_With_Key and I am trying to update table [dbo].[Darin_Address_File]. If I remove one of the update statements it works fine it just doesn't like trying to execute both. The message I am getting is Msg 208, Level 16, State 1, Line 58 Invalid object name 'Darin_Import_With_Key'.
BEGIN SET NOCOUNT ON; WITH Darin_Import_With_Key AS ( SELECT [pra_id] ,[pra_ClientPracID]
There are certain errors that does not come during compilation and it shows during execution because of late-binding concept implemented in SQL Server from 7.0 version.
The problem is when Tables are not there, SPs are created. And there is no option where we can set like 'Validate object resolution during compilation"
There are lot of SPs that are in invalid status because the tables are really not there and SP needs to be modified to reflect the correct table name. In Oracle, if I have to find the list of objects that are in invalid state (because of object resolution problems), it was possible. How do I do it in SQL?
I need a listing of all objects in my database that is in invalid state. Searched in NET but there seems to be no supporting tool also that lists invalid objects.
Pl let me know whether there exists a way by which I can get to know the invalid object lists in my SQL 2005 database
Hi, whenever the underlying query being called by EXEC in the followinghas an empty result set I get the following error -- Invalid Data for'Numeric' when EXEC returns empty row. However if I call the querywithout using REPLACE (which I'm forced to do, because openquery doesnot allow variables), I get just an empty result set. Whenever theunderlying query returns a non-empty result set, the code works withouterror (regardless of wether there are nulls in the numeric column).set @switch ='5707550'set @start_date = '01-JAN-2006'set @end_date = '27-JAN-2006'set @month = 1set @year = 2006set @sql_str='SELECT * FROM(select MSC_KEY,to_char(trunc(TSTAMP), ''yyyy-Mon-dd'') as "Timestamp",ROUND( NVL(SUM(SUNRGMMSCBHCP1.XASUTIL),0) / DECODE (NVL(SUM(SUNRGMMSCBHCP1.XASNXFR),0),0,NULL,NVL(SUM( SUNRGMMSCBHCP1.XASNXFR),0)), 5)as "PER_CPU_UTIL"FROM NOR_GSM_COMPOSITE_MSC1_BHCPP SUNRGMMSCBHCP1,mscs_view vWHERE SUNRGMMSCBHCP1.gsm_msc_key = v.msc_key and v.MSC_KEY in (' +@switch + ')and SUNRGMMSCBHCP1.TSTAMP between to_date(''' + @start_date + '00:00:00'', ''DD-MON-YYYY HH24:MI:SS'') andto_date(''' + @end_date + ' 23:59:00'', ''DD-MON-YYYYHH24:MI:SS'')group by MSC_KEY, trunc(tstamp))WHERE rownum < 10000'SET @sql_str = N'select * from OPENQUERY(VISION, ''' +REPLACE(@sql_str, '''', '''''') + ''')'EXEC (@sql_str);Is there anyway to prevent this error?Thanks,Crazy
Ok I'm trying to connect to my easycgi.com MSSQL database.I can connect OK.My ID is in the db_owner group.I can create and edit tables and data.I can open a table and see the data.I can view the SQL statement behind the open table (select * from Table) and execute it successfully.But if I open a new query window and type "select * from [table]" (or any other query), no matter which table it is, I get an error:Msg 208, Level 16, State 1, Line 1Invalid object name '[table name]'.I've searched the web and found this error plenty of times, usually associated with security or the schema. But all my objects are under dbo and I'm in db_owner... ???
When running 'select * from <table> everyone gets 'invalid object' error. When they run 'select * from <database>.<objectowner>.<table> it works fine. This would lead one to believe that they're either not in their default database or that they don't own the objects. However this is not the case.
Why do they need to qualify everything if they're running from their own databaase, they own the object and they're logged in as the objectowner?
This was working fine one day but not the next. They connect using a DSN that's on a web server and they pass their login and password but not their database. I don't have this problem and can't duplicate anyone else's, but I'm not on the web server, I'm going directly to teh SQL server using Query Analyzer.
I'm connecting to an SQL Server database through a Perl script (using Win32::ODBC). The connection seems to go through fine, as in, I get no errors. But even simple statements like "Select * from AccountTable" dont work. I get the error Invalid Object Name 'AccountTable'. The table exists and I even gave myself explicit permission for "SELECT" statements for that table.
Are there any other permissions that need to be set? The DSN defaults to the database that I need.
Any help would be most appreciated. I'm going mad here. Thanks. -Amrita
as i run my code (windows application) i get this error
Invalid object name 'dbo_TASk'. Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
/****** Object: Stored Procedure dbo.stp_per_task_by_system_sel Script Date: DATE ******/ IF EXISTS (SELECT * FROM dbo.sysobjects WHERE id = OBJECT_ID(N'[dbo].[stp_per_task_by_system_sel]') AND OBJECTPROPERTY(id, N'IsProcedure') = 1) DROP PROCEDURE [dbo].[stp_per_task_by_system_sel] GO
CREATE PROCEDURE dbo.stp_per_task_by_system_sel ( @sys_id int ) AS -------------------------------------------------------------------------------- -- Created by : Jacco B -- Date created : 1-febrauri-2007 -------------------------------------------------------------------------------- -- Description : deze stp haalt de specefieke taken van een geselecteerd systeem uit de database -------------------------------------------------------------------------------- -- Test string : stp_per_task_by_system_sel 'var' -------------------------------------------------------------------------------- -- Change Log : Date By Description -- -------- ------ ------------------------------------ -- -------------------------------------------------------------------------------- BEGIN SET NOCOUNT ON --declaratie locale variabelen DECLARE @error integer, @object_name varchar(30)
--begin transactie SELECT @object_name = object_name(@@procid) BEGIN TRAN @object_name
--begin procedure SELECT SYSTEM_STANDARD_TASK.*, TASk.* FROM SYSTEM_STANDARD_TASK INNER JOIN dbo_TASk ON SYSTEM_STANDARD_TASK.tas_id = TASk.tas_id WHERE SYSTEM_STANDARD_TASK.sys_id = @sys_id
--Errorafhandeling SELECT @error = @@error IF @error <> 0 BEGIN ROLLBACK TRAN @object_name RETURN @error END
--commit transactie COMMIT TRAN @object_name RETURN 0 END
GO
--grant exec to sql group GRANT EXECUTE ON [dbo].[stp_per_task_by_system_sel] TO [PERIODIEK_USER] GO
Hi, My application uses VB6 and Sql-Server 2000. I can’t understand why the error INVALID OBJECT NAME Run-time error '-2147217865 (80040e37)' appears only sometimes and not always. For example, a select instruction is executed inside a loop without any problem 1 thousand times, then when I try to execute it 1 thousand times and one, it fails.
Have you got any suggestions?
I’ve read a lot of posts on Internet Forums, without finding any solutions.
In the mail I attach, you can see that the application stops at 79%, after having executed many times the select instruction without any problem!
First I restored the master database and after the others databases. But when I connect by Query Analyser with a user that is a DBO and I execute a select the system return : "Invalid object name 'XXXX'"
This is what I have. It works fine until I get to the select statement, then it tells me that I have an invalid object name. What am I missing? Thanks!
DECLARE @SvrName varchar(100)
if @@SERVERNAME='pubs' begin set @SvrName=’pubs.books.isbn’ print @SvrName end if @@SERVERNAME='MGMFILENET' begin set @SvrName=’store.books.isbn’ print@SvrName end
print @@SERVERNAME PRINT @SvrName SELECT * FROM "@SvrName"
Hi,I have two tables in differents databases : Master database :ServerInformation where there is a table called "Clientes" and Table"Documentos" in the Database Index2003What I need to do via Trigger is update the table "Documentos" in thefield "Cliente" everytime the "Clientes" table change the field'Cliente'.I´m using the follow TriggerCREATE TRIGGER UPDate_Documentos_Index2003 ON dbo.ClientesFOR UPDATEASUPDATE [dbo].[Index2003].[Documentos]SET [dbo].[Index2003].[Documentos].Cliente = i.ClienteFROM Inserted iINNER JOIN [dbo].[Index2003].[Documentos] DON D.ID_Clientes = i.ID_ClientesWhen I commit the change in the register "Clientes" arise the followmessage :Invalid object name 'dbo.Index2003.Documentos'Have I doing something wrong ?Thanks for attetionLeonardo Almeida*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
Once i have created a new query and it all works fine I save the query and then I run into trouble. When I come to re use the query at a later date it dosen't work and brings up the following error.
Msg 208, Level 16, State 1, Line 15
Invalid object name 'kup_regions'.
which equates to this line -
if (select sitetype from kup_regions where region_code = @Location) = 10
I am using 'sa' as my username and sql server management studio
The following T-SQL code generates the error "Invalid object name 'tf_1.dbo.ADX_1'". The database is attached; I can view the table in SSMS and using VB8 code but can't get this statement to run without error. What am I doing wrong?
SELECT t1.* FROM tf_1.dbo.ADX_1 AS t1, tf_2.dbo.ALN_1 AS t2 WHERE t1.[DateTime] BETWEEN '2004-01-01T09:30:00' AND '2004-02-01T16:00:00' AND t2.[DateTime] BETWEEN '2004-01-01T09:30:00' AND '2004-02-01T16:00:00' AND t1.[DateTime] = t2.[DateTime] ORDER BY [DateTime]
environment: asp.net 2.0, vb, sql server 2000, windows server 2003. Currently when I try to test to enter information through a CreateUserWizard this error pops up, I have checked my databases and I do have a aspnet_SchemaVersion there, I checked around the net and on the forums and I fixed any problems I thought could be causing it, I gave network services rights, as well as my sql server login, I have both a membership and a schemaversion table in the database. I ran aspnet_regsql.exe to make a new target for my <forms> login, I just don't see what the problem is and can't seem to find anything out there that is the same as my problem. The following is the web.config: <configuration> <appSettings> <add key="ConnectionString" value="Data Source=mew@mew.com;UID=mew;pwd=mewmew" /> <add key="ConnectionString" value="Server=xxxxxxxxxx;database=customerlogin;UID=xxxxxxxxx;pwd=xxxxxxxx;Trusted_Connection=True" /> </appSettings> <connectionStrings> <add name="SqlServerConnection" connectionString="Server=xxxxxxxxxx;database=customerlogin;UID=xxxxxxxxxx;pwd=oni@ichi;Trusted_Connection=True" /> <remove name="LocalSqlServer"/> <add name="LocalSqlServer" connectionString="Data Source=xxxxxxxxxx;Integrated Security=SSPI;Initial Catalog=customerlogin;UID=xxxxxxxxx;pwd=xxxxxxxxx;Trusted_Connection=True" /> </connectionStrings> <location path="secret"> <system.web> <webParts> <personalization defaultProvider="MyPersonalizationProvider"> <providers> <membership defaultProvider="MyMembership"> <add name="MyMembership" type="System.UI.WebControls.WebParts.SqlPersonalizationProvider" connectionStringName="SqlServerConnection" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" requiresPassword="false" /> </membership> </providers> <authorization> <deny users="?" /> </authorization> </personalization> </webParts> <authentication mode="Forms" /> </system.web> </location></configuration> and this is the register.aspx page: <%@ Page Explicit="true" debug="true" language="vb" %><%@ Import Namespace="System.Data" %><%@ Import Namespace="System.Data.SqlClient" %><%@ Import Namespace="System.Data.Mail" %><%@ Import Namespace="System.Net.Mail" %><%@ Import Namespace="System.Web.Configuration" %> <script runat="server"> Sub Page_Load() If Not Page.IsPostBack Then Dim dest As String = "~/Default.aspx" If Not String.IsNullOrEmpty(Request.QueryString("ReturnURL")) Then dest = Request.QueryString("ReturnURL") CreateUserWizard1.ContinueDestinationPageUrl = dest End If End If End Sub Sub CreateUserWizard1_CreatedUser(ByVal sender As Object, ByVal e As EventArgs) CreateUserProfile(CreateUserWizard1.UserName, txtFirstName.Text, txtLastName.Text) End Sub Private Sub CreateUserProfile(ByVal userName As String, ByVal firstName As String, ByVal lastName As String) Dim conString As String = WebConfigurationManager.ConnectionStrings("Test").ConnectionString Dim con As New SqlConnection(conString) Dim cmd As New SqlCommand("INSERT Test (UserName,FirstName,LastName) VALUES (@UserName,@FirstName,@LastName)",con) cmd.Parameters.AddWithValue("@UserName", userName) cmd.Parameters.AddWithValue("@FirstName", firstName) cmd.Parameters.AddWithValue("@LastName", lastName) Using con con.Open() cmd.ExecuteNonQuery() End Using End Sub </script> <html><head><title>Untitled Document</title></head> <body><form runat="server" id="form1"><asp:CreateUserWizard id="CreateUserWizard1" OnCreatedUser="CreateUserWizard1_CreatedUser" Runat="server" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" requiresPassword="false"><WizardSteps><asp:WizardStep> <asp:Label id="lblFirstName" Text="First Name:" AssociatedControlID="txtFirstName" Runat="server" /> <br> <asp:TextBox id="txtFirstName" Runat="Server" /> <br> <br> <asp:Label id="lblLastName" Text="Last Name:" AssociatedControlID="txtLastName" Runat="server" /> <br> <asp:TextBox id="txtLastName" Runat="server" /></asp:WizardStep><asp:CreateUserWizardStep /></WizardSteps></asp:CreateUserWizard>
</form></body></html> The exact error with stack trace is below: Invalid object name 'dbo.aspnet_SchemaVersions'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Invalid object name 'dbo.aspnet_SchemaVersions'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
When I execute this statement through ASP.NET select cntr_value FROM sysperfinfo I get this error, System.Data.SqlClient.SqlException: Invalid object name 'sysperfinfo'. Any ideas why?
I am attempting to call a user defined function from a stored procedure in the same database, and I get the following error:Invalid object name 'dbo.fn_NewSplit'.I've tried calling it as dbo.fn_NewSplit, fn_NewSplit etc. I also setup another that had my DB login IE ihomesm_maindb.fn_NewSplit and get the same results. Interestingly there is another previously built stored procedure calling the same function with apparantly no problems. Also, I have tried to execute this stored procedure with both my .net application and within the query analyzer with the same error.
Hello everyone!Need help in this. Using a SP for selecting the most recent record in a set. system can contain up to 4 records for each code. So need to select the latest effective code from the system. I am getting following error when i execute this Sp. Msg 208, Level 16, State 6, Procedure DisclaimerLatestVersion, Line 10Invalid object name 'dbo.DisclaimerLatestVersion'. I have checked I am using same DB in which Disclaimers table is present. Checked the spellings as well. Hmmmm struck in this. Thanks alot in advanceALTER PROCEDURE [dbo].[DisclaimerLatestVersion]AS SELECT T1.DisclaimerId as Id , T1.DisclaimerCode as Code , T1.DisclaimerTitle as Title , left (T1.DisclaimerText, 200) as Body , T1.Created as Created , T1.Effective as Effective , convert (bit, case when T1.PdfContent is null then 0 else 1 end) as HasPdfContent , convert (int, case when T1.PdfContent is null then 0 else len (PdfContent) end) as PdfContentSize , T1.SaveAsFileNamefrom Disclaimers T1 INNER JOIN (SELECT DisclaimerCode, MAX(Effective) MaxEffectiveDate FROM Disclaimers Group BY DisclaimerCode)T2 ON T1.DisclaimerCode = T2.DisclaimerCode And T1.Effective = T2.MaxEffectiveDate
Please ignore my previous thread. Basically I have 'sp_totHotelDailyAdviceMASundays' which calls 'sp_rptHotelMonthlyInvoiceSundays' which uses fn_rptHotelDailyDetailsMASundays.
I am now getting the following error when I run the top most sp; 'sp_totHotelDailyAdviceMASundays':
Server: Msg 208, Level 16, State 3, Procedure sp_rptHotelMonthlyInvoiceSundays, Line 3 Invalid object name 'sp_totHotelDailyAdviceMASundays'.
1) The top most sp is: CREATE PROCEDURE dbo.sp_rptHotelMonthlyInvoiceSundays (@aDate datetime) AS SELECT Firms.FirmID, sp_totHotelDailyAdviceMASundays.AccountTypeID, AccountTypes.AccountType, Firms.CompanyTypeID, Firms.InvoiceAddressee, Firms.InvoiceAddresseeEMailAdd, Firms.CommissionAdviceAddressee, Firms.CommissionAdviceAddresseeEMailAdd, Firms.[Firm Name], Firms.Address, Firms.Town, Firms.PostCode, sp_totHotelDailyAdviceMASundays.FirmID1, sp_totHotelDailyAdviceMASundays.SumOfInvoiceSubTotal, sp_totHotelDailyAdviceMASundays.SumOfOrderDiscountAmount, sp_totHotelDailyAdviceMASundays.SumOfInvoiceTotal, sp_totHotelDailyAdviceMASundays.SumOfInvoiceVatElement, sp_totHotelDailyAdviceMASundays.CustomerTypeID, sp_totHotelDailyAdviceMASundays.SumOfNotFinalised --vw_totHotelDailyAdviceMASundays.[Taken Date] FROM Firms INNER JOIN (AccountTypes INNER JOIN sp_totHotelDailyAdviceMASundays (@aDate) ON AccountTypes.AccountTypeID = sp_totHotelDailyAdviceMASundays.AccountTypeID) ON Firms.FirmID = sp_totHotelDailyAdviceMASundays.FirmID1 WHERE (((Firms.CompanyTypeID)=8)) GO
2) sp_totHotelDailyAdviceMASundays, which is used in (1), above: CREATE PROCEDURE [dbo].[sp_totHotelDailyAdviceMASundays] (@aDate DateTime) AS SELECT FirmID1, OfficeSiteID,[Office Site Name], Sum(OrderDiscountAmount) AS SumOfOrderDiscountAmount, Sum(InvoiceTotal) AS SumOfInvoiceTotal, Sum(InvoiceVatElement) AS SumOfInvoiceVatElement FROM fn_rptHotelDailyDetailsMASundays (@aDate) GROUP BY FirmID1, OfficeSiteID,[Office Site Name] GO
3) fn_rptHotelDailyDetailsMASundays, is a udf used in (2), above. CREATE FUNCTION fn_rptHotelDailyDetailsMASundays ( @aDate datetime) RETURNS TABLE AS RETURN ( SELECT Firms.FirmID AS FirmID1, [Office Sites].OfficeSiteID, ........ FROM ((Firms INNER JOIN [Office Sites] ON ......... WHERE ( ((DATEPART(Month,[TakenDate]))=DATEPART(Month,@aDate) ) AND ((DAtEPART(Year,[TakenDate]))=DATEPART(Year,@aDate)) AND (DATEPART(dw, [TakenDate])=1) AND .........
Both (2) and (3) work fine.
The above error occours when I execute (1) like so: dbo.sp_rptHotelMonthlyInvoiceSundays '3/3/04'
Note that the date parameter, aDate, is passed on from (1) to (2) to (3), the udf and is only used in the udf's where clause and is never used in (1) or (2).
I have done DTS to transfer all the objects(entire database) from server1 to server2.When I do a select * on any user table in server2,it says invalid object name.Any idea?
Having setup SMS1.2 on an NT4 server running over an evaluation copy of SQL6.5 we then decided to setup SMS1.2 (a new site) on another NT4 server, only this time we purchased a copy SQL7. Just after the install starts we are getting the following error messages from SMS install sheild (the errors seem to indicate an SQL problem rather than SMS):
SQL Error: Could not create database. General SQL Server error: Check messages from SQL Server. General SQL Server error: Check messages from SQL Server. General SQL Server error: Check messages from SQL Server. Invalid object name 'sysusages'. Invalid object name 'sysusages'. Database 'SMS' already exists.
I have tried uninstalling SQL and reinstalled but withouth success.
Thanks in advance.
Anyone have any ideas?
PS. Im new to this stuff and have looked at the SQL errorlog fie but there does not seem to be anything relevant to this in it.
