I am real new to SQL Server. We are using SQL Server 2000.
My objective is to get a list of all store procedures for specific database. To accomplish this, I programmatically create a connection to the 'master' database where the sp resides, create a callablestatment for 'sp_stored_procedures' ({call sp_stored_procedures(?,?,?)}). I am passing in null, null, and the database name. When I execute the query, I get the below error:
Code:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Invalid parameter binding(s).
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
When I made the connection to the master database, I used one of the existing users from the master database.
I looked at the store procedure and verified the sp has 3 input parameter. The first two can be null.
I am not sure why I can not run this sp. I am wondering if we have the database setup properly. Any help or suggestions would be well worth it at this point.
While trying to execute the below query I get an error "Invalid Paramter Binding.
SELECT RELEASE_CYCLES.RCYC_NAME+' : '+ CYCL_FOLD.CF_ITEM_NAME /*Test Set Folder (CYCLE).Name*/ as "Cycle Name : Test Component", SUM(case when t3.status='Passed' then 1 else 0 end) "Passed", SUM(case when t3.status='Failed' then 1 else 0 end) "Failed", SUM(case when t3.status='Not Completed' then 1 else 0 end) "Not Completed", SUM(case when t3.status='No Run' then 1 else 0 end) "No Run", SUM(case when t3.status in ('Passed','Failed','Not Completed','No Run') then 1 else 0 end) "Total",
Hi, I am using a SQL DataSource with a few parameters. I need to specify the value of the parameters at run time but I need a custom way to do it as the value needs to be calculated not come from Cookie, Control, Form, Profile, QueryString or Session. Is there a way to bind your own value to these parameters. For instance if I had a variable how would I bind that to the parameter? At the moment i am doing the following which works but I dont think it is the correct way dsMyDataSource.SelectParameters["MyParameter"].DefaultValue = MyCalculatedValue; In previous projects i have added a value to the Session and then bound the parameter value to the session but that doesnt seem like a good solution either. Thanks for any help you can give. Martin
Hello, I just started working with ASP.NET.I'm trying to use the CheckBoxList Control. As I understand it, you can bind a SqlDataSource to this control and it loads the list for you. However tp precheck the items, you have to do this manually. This part works fine. Next part was to save whatever the user checks. I wrote stored Procedure and now just trying to pass 1 parameter to the stored procedure using a second SqlDataSource. I get the error: "A severe error occurred on the current command. The results, if any, should be discarded."Here is the second datasource I am using to try and save the data:<asp:SqlDataSource ID="sds_PersonRole" runat="server" ConnectionString="<%$ ConnectionStrings:Development %>"SelectCommand="usp_selectPersonRole"SelectCommandType="StoredProcedure"UpdateCommand="usp_updatePersonRole"UpdateCommandType="StoredProcedure"><SelectParameters> <asp:ControlParameter ControlID="gv_Person" Name="PERSON_ID" PropertyName="SelectedValue" Type="Int32" /></SelectParameters><UpdateParameters> <asp:Parameter Name="strXML" Size="8000" Type="String" /> <asp:Parameter Direction="InputOutput" Name="err_msg" Type="String" Size="150" DefaultValue="0" /></UpdateParameters></asp:SqlDataSource>I have a code behind file with the following modules: (btnEditPerson is clicked to start the process. the sds_PersonDetails is updated via form contolls and works fine.) Error occurs on the bolded line (Stored procedure is just accepting the string and saving to a field. It works fine, I tested it. Its just erroring out before it runs the stored procedure. Protected Sub btnEditPerson_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnEditPerson.Click sds_PersonDetails.Update() gv_Person.DataBind() sds_PersonRole.Update()End Sub Protected Sub sds_PersonRole_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles sds_PersonRole.Updating Dim command As Data.Common.DbCommand command = e.Command 'un-check all checkboxlist items (count - 1 to account for starting at 0) Dim listCount As Integer = cbl_Role.Items.Count() - 1 Dim strXML As String strXML = "<personRole>" For x As Integer = 0 To listCount If cbl_Role.Items(x).Selected() = False Then strXML = strXML & "<person id='" & gv_Person.SelectedValue & "' />" strXML = strXML & "<role id='" & cbl_Role.Items(x).Value & "' />" End If Next strXML = strXML & "</personRole>" command.Parameters("@strXML").Value = strXML lbl_ErrMsg.Text = command.Parameters("@err_msg").Value.ToString() End Sub
I have a report which displays a customers invoice, in both the companys local currency, and the customers local currency.
The report language is "English (United Kingdom)" The fields showing customers currency language setting is set to something else, i.e. "France (French)" to display the Euro currency.
The application handles 34 currencies, the query returns the language string, ("France (French)"), to allow the report to bind its language setting to the querys output.
However, it doesn't work, a normal textbox will display the correct country name string, but Reporting Services cannot bind the language setting to a query result. So I also tried setting it as a report parameter, but no joy either (all currencys revert to USD).
I'm using =First(Fields!curFormat.Value, "myDataSet") to bind the 'language' setting, the result of this expression returns "France (French)", which is a valid option for this language setting, as it's in the drop down list.
Rather than create 34 seperate reports for each currency, are there any suggestions on how to bind a fields language setting to a query result?
I have a ##temp table which collects command (varchar(120)) info from sysjobsteps table as follows: command ------------------------------ BACKUP DATABASE FDMS_11111_2 To Backup_11111_2_4Thu with init, name = 'Backup of Job_11111_2_4Thu'
Now, I need to extract the database name from the command string: It did return the correct database name but ended with error message.
select substring(command, 17, charindex(' To Backup_',Command)-17) from ##tempServerNameDatabaseNameJobHistory
I am running SQL 7 Svc Pack 2 on TN 4.0 Svc Pack 6a.
I am getting the following error when opening up a DTS package on my SQL Server from EM on my workstation. If I open it up on the server by using pcanywhere the package opens fine. Ther error is a dialogue box stating:
Package Error
Error Source:Microsoft Data Transformation Services (DTS) Package Error Description: The Parameter is incorrect.
Has anyone seen this. I get nothing in the event log or SQL logs. I can't seem to figure this one out.
First of all... thanks for a great and interesting product... this is really nice...
I'm working with a winform app and pushing it out via click-once deployment (using the bootstrapper for SQLCompact as well)... the SQL install is fine, however when my app attempts to do anything with the db, i get an error "invalid reconciler parameter" error... some searching seems to indicate that this could be coming from the path being longer than 128chars... howeve, using click once, i'm not certain I can control the deployment location... I'm certain that there is a work around, but not sure what it is... any guidance?
As a note, running the app on the same machine using the output from VS (not installed via ClickOnce but simply running hte exe) works fine...
I have the follwoing stored procedure:ALTER procedure [dbo].[up_GetExecutionContext](@ExecutionGUID int = null) asbeginset nocount ondeclare@s varchar(500)declare @i intset @s = ''select @s = @s + EventType + ','-- Dynamically build the list ofeventsfrom(select distinct top 100 percent [event] as EventTypefrom dbo.PackageStepwhere (@ExecutionGUID is null or PackageStep.packagerunid =@ExecutionGUID)order by 1) as xset @i = len(@s)select case @iwhen 500 then left(@s, @i - 3) + '...'-- If string is too long thenterminate with '...'else left(@s, @i - 1) -- else just remove the final commaend as 'Context'set nocount offend --procedureGOWhen I run this and pass in a value of NULL, things work fine. When Ipass in an actual value (i.e. 15198), I get the following message:Invalid length parameter passed to the SUBSTRING function.There is no SUBSTRING being used anywhere in the query and thedatatypes look okay to me.Any suggestions would be greatly appreciated.Thanks!!
FYI. Perhaps I missed it on the Fix List, but applying SP3 to my Win2K Professional workstation w/ SQL Server 7 Desktop Edition remedied a chronic error I'd been receiving when trying to open a pre-existing DTS package which resided on other servers. For weeks, no matter what I've tried, I've been getting a message box saying "Invalid Paramter". (I didn't go as far as an uninstall / re-install, but I did about everything short of that.) After applying SP3, the DTS packages open up easily.
I've set up a data-driven subscription on a report but it's not sending and the error log says it's because:
Default value or value provided for the report parameter 'CSRFaxID' is not a valid value.
For the particular dataset record causing the error I'm passing the value Null to the report parameter. The report parameter CSRFaxID is set up with "Allow Null" and with a default value of Null. I can run the report in my browser with CSRFaxID set to null, but the scheduled subscription is not able to produce the report with the same parameter value. Does anyone have any idea what the problem is and how I can fix it?
select substring(ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''),1,charindex(',',ISNULL(CAST(FullAdress AS NVARCHAR(MAX)),''))-1) from tbl_lrf_company_details_with_codes
but i am getting the error as "Invalid length parameter passed to the SUBSTRING function." Please advice Thanks In advance
I am using a simple procedure to pivot results (found in another forum and adapted it). It is done on SQL Server 2005 server with all service packs. Procedure: ************** ALTER Procedure [dbo].[EthnicityPivot] @StDate as Datetime, @EndDate as Datetime as begin DECLARE @Teams varchar(2000)
truncate table ForEthnicPivot
INSERT INTO ForEthnicPivot SELECT DISTINCT COUNT(ID), Team, Ethnicity FROM dbo._EthnicityByTeamEpisode where Startdate between @StDate and @EndDate GROUP BY Ethnicity, Team
SET @Teams = '' --// Get a list of the pivot columns that are important to you.
SELECT @Teams = @Teams + '[' + Team + '],' FROM (SELECT Distinct Team FROM ForEthnicPivot) Team --// Remove the trailing comma
SET @Teams = LEFT(@Teams, LEN(@Teams)-1) --// Now execute the Select with the PIVOT and dynamically add the list --// of dates for the columns EXEC( 'SELECT * FROM ForEthnicPivot PIVOT (SUM(countID) FOR Team IN (' + @Teams + ')) AS X' ) end ************
I can call the function: exec EthnicityPivot '01/01/2007','09/09/2007'
and it works fine in SQL analyzer, but when I want to use it in Visual Studio in a new report I am getting this error message:
There is an error in the query. Invalid length parameter passed to the SUBSTRING function. Incorrect syntax near ')'.
Hi, I am new at sql 2000 and 2005, I have created a package in 2005 which I am trying to execute on a daily bases by creating a job. At first because of security issues the job would not execute. Hence, I had to create a credential and a proxy to run the job with sa account. Now it is giving me this error, €œSQLServer Error: 536, Invalid length parameter passed to the SUBSTRING function. €œ Through research I have no clue as what I need to do, or where to look. The package runs without error when I execute the package itself. Any help is greatly appreciated. Thanks, Lori
Hi i got errro mess "Invalid length parameter passed to the substring function" from this below. Anyone how can give me a hint what cause this, and how i can solve it? if i remove whats whitin thoose [] it works, i dont use [] in the code :) colums: VLF_InfectionDestination is nvarchar 254
SELECT TOP 10 tb_AVVirusLog.VLF_VirusName, COUNT(tb_AVVirusLog.VLF_VirusName) AS number FROM tb_AVVirusLog INNER JOIN __CustomerMachines002 ON tb_AVVirusLog.CLF_ComputerName = __CustomerMachines002.FalseName WHERE (CONVERT(varchar, tb_AVVirusLog.CLF_LogGenerationTime, 120) BETWEEN @fyear + @fmonth + @fday AND @tyear + @tmonth + @tday) AND (__CustomerMachines002.folder_id = @folderId) [OR (CONVERT(varchar, tb_AVVirusLog.CLF_LogGenerationTime, 120) BETWEEN @fyear + @fmonth + @fday AND @tyear + @tmonth + @tday) AND (tb_AVVirusLog.VLF_InfectionDestination LIKE N'%@%')] GROUP BY tb_AVVirusLog.VLF_VirusName HAVING (NOT (tb_AVVirusLog.VLF_VirusName LIKE N'cookie')) ORDER BY COUNT(tb_AVVirusLog.VLF_VirusName) DESC
The subject pretty much sums the problem up. I am trying to get a database installed on Server 2008 RC0. The public information says SQL 2005 SP2 should work, but I cannot get the base SQL 2005 installed in order to apply the service pack. When I run the installation, I immediately get an error when trying to install the pre-requisites. Specifically, the .NET 2.0 Framework errors with code 87, "invalid parameter".
I have found a couple references to this error code, but nothing to do with Server 2008 and RC0. I have tried using a directory with no spaces, and tried the EXE vs ISO installation, but they everything fails. I don't know if there is a way to bypass the .NET 2.0 Framework install - since it's already on the machine anyway.
An application I developed normally works great, but it seems that when processing a certian record (and none of the others so far), SQL Server throws this error: "Invalid length parameter passed to the substring function."
Private Sub setControls(ByVal dr As SqlDataReader) If (dr.Read()) Then '<--*******problem line*******
The SqlDataReader (orderReader) doesn't blow up or anything until I call .Read() (and, as mentioned, this problem only occurs for one order). What could be happening here?
I am using SSRS 2008 and the reports we have use parameters of type Date/Time. Â The reports work well when the parameter values are entered correctly.
When entering an invalid date format for one of the Date/Time parameters the following error is displayed "The value provided for the report '<parameter name>' is not valid for its type. (rsReportParameterTypeMismatch). Â This seems to be working correctly as well. Â However, when the correct date format is then entered for the report parameter for which the report threw an error, the error persists and the report doesn't run again. Â Setting the parameter to "NULL" doesn't work either.
The only way to get the report to run again is to refresh the entire report. Â Of course, if at that point one has entered a bunch of other parameter values, those values all disappear.
Hi all I have a form view which uses a SQL data source control to retrieve it's data from the sql express database the form view is used for view,edit,delete and insert data into the database in the insert mode I have two dropdownlists, where the second one is depending on the first one to retrieve the correct data from the data base BUT when selecting a value in the first dropdownlist it give me the following erro: Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
Please How can do this any help is appriciated bye
Hey guys, Am in need of help please, basically the program im working with at the moment is when you add a New Contract, it will grab the Contract Number you have entered, Post it over to another page, then using that number bind a Gridview. The SQL being "SELECT Contract_ID, Contract_Number, Start_Date, End_Date, Quarterly_Rent FROM ECS_Contracts_Test WHERE Contract_Number = " & conNoVar (this being the Contract Number of the recently added Contract), however then it comes to Bind the Grid it kicks up an System.Data.SqlClient.SqlException: Syntax error converting the nvarchar value '2009P7899' to a column of data type int.But the Column Contract_Number is set to Varchar and all I really want to do is to create this gridview using this criteria and not convert anything! The Contract_ID is an int, which is needed as I increment it. Heres the error code: Public Sub BindtheGrid()'Bind the Contract Grid, where ContractID is used Dim SQL As String = "Contract_ID, Contract_Number, Start_Date, End_Date, Quarterly_Rent" Dim objConn As SqlConnection = New SqlConnection(ConnectionString) Dim cmdstock As SqlCommand = New SqlCommand("SELECT " & SQL & " FROM ECS_Contracts_Test WHERE Contract_Number = " & contractQueryID, objConn) cmdstock.CommandType = CommandType.Text objConn.Open() GridView1.DataSource = cmdstock.ExecuteReader() GridView1.DataBind() objConn.Close() End Sub If you need any more information then please let me know. Mucho Aprreciated
Hi guys, I am about to bind my websites user inputted values into my database. I intend to use sql for this. THe site is very basic, dropdownlists and textboxes. The user is required to choose values and write in questions. Now these inputs ought to be stored somewhere right??, so for that i am using sql. Now i know sql, but how do I store data from a website and all, I have no clue, someone give me basic steps on how to go about doing this pleaseeeeee!!!
I have this stored procedure that almost works: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
ALTER PROCEDURE [dbo].[udForumTopicMessageByForumTopicID] @ForumTopicID int AS SELECT ftm_parent.ForumTopicMessageID AS "ForumTopicMessageID", ftm_parent.ForumTopicID AS "ForumTopicID", ftm_parent.ContactID AS "ContactID", ftm_parent.MessageTitle AS "MessageTitle", ftm_parent.MessageText AS "MessageText", ftm_parent.ApprovedInd AS "Approved", ftm_parent.ReviewedInd AS "ReviewedInd", ftm_parent.ParentMessageID AS "ParentMessageID", ftm_parent.OwnerCompany AS "ForumTopicMessageOwnerCompany", ftm_parent.CreateUser AS "ForumTopicMessageCreateUser", ftm_parent.UpdateUser AS "ForumTopicMessageUpdateUser", ftm_parent.CreateDate AS "ForumTopicMessageCreateDate", ftm_parent.UpdateDate AS "ForumTopicMessageUpdateDate", '('+CAST(ChildResponseCount As VARCHAR(10))+')' As "ChildResponseCount", (T_Contact.Lastname + ', ' + T_Contact.Firstname) As "ContactName" FROM [T_ForumTopicMessage] as ftm_parent INNER JOIN [T_Contact] ON [T_Contact].ContactID = ftm_parent.ContactID Left JOIN (Select COUNT([T_ForumTopicMessage].ForumTopicMessageID) As "ChildResponseCount", MAX([T_ForumTopicMessage].ParentMessageID) AS "ParentMessageID" FROM [T_ForumTopicMessage] WHERE [T_ForumTopicMessage].ParentMessageID = ftm_parent.ForumTopicMessageID group by [T_ForumTopicMessage].ForumTopicMessageID) as ftm_child ON ftm_parent.ForumTopicMessageID = ftm_child.ParentMessageID WHERE ftm_parent.ForumTopicID = @ForumTopicID ORDER BY ftm_parent.CreateDate See the purple ftm_parent.ForumtopicMessageID. If I hard-code that to a 2, this works. With the fieldname there, SQL Server Management Studio says: Msg 4104, Level 16, State 1, Procedure udForumTopicMessageByForumTopicID, Line 9 The multi-part identifier "ftm_parent.ForumTopicMessageID" could not be bound. If any experts out there can help me out with this, I'm sure it wouldn't take much to fix.
