Hi,
Do you know why when I run my ssis packages in the dev machine, the diagrams are not visible during run time.
I can design the package but not sure why when I start the package, the diagrams in the control flow can not be viewed.
Please note that if I do this on the server, I can see the diagrams during run time.
Thanks
Hi, I am porting a massive VB6 project to ASP.net 2005. Most of the code is fine, however because the original developers used lots of data controls and my own time restrictions I thought to replicate the functionality by using Sqldatasource controls instead.
These data controls are bound to DBtruegrids. The project has has lots of code like...
AdodcOrders.Recordset.RecordCount > 0 or If AdodcOrders.Recordset.EOF or AdodcOrders.Recordset.MoveNext() or
AdodcDetail.Recordset!FieldName
The problem is the sqldatasource control doesn't have a recordset/dataset property which I can access and manipulate, or does it? What should I do to get round these? The project has thousands of lines like this in so its not feasible to rewrite it (although if I could I would!).
Any suggestions please gratefully appreciated.
many thanks
mike
I am facing a problem of invisible data. I have developed a ASP based application in my local laguage and data is entered from 8 clients. Now I have found that in a particular table in the SQL Server very few data is not visible if I see from the SQL query analyzer. But if I go the application and try to enter the data again it gives a message that the data already exist and next time if i see it from query analyzer the data is displayed.
Please help.
Bidyut Rn. Gohain
Hey, everybody,
I need your help on figuring out what is this invisible character in one of my data column.
The file is from IBM DB2 as text. I am comparing the data with the one in SQL server. There is one white space at the end of the column I couldn't get rid off.
The text strings from both side look idential except the DB2 one has a "space" at the end.
The len() show it's 13, while the sql one is 12. However, the rtrim()/ltrim() did not get rid of it.
This column is at the end of the row. So it could be CR or LF.
To use padindex or stuff functions, I need to know what is this stuff.
Talking about working hard for "NOTHING".
Thanks!
I am not sure why when the packages are run, the components dissapear. The only thing I see is the result in the output.
So there is no visual on the tabs.
Thanks
Recently found a situation which I can not figure out the cause. Wish somebody can help me here.
The scenario is as follows:
Server: SQL 7.0 with SP2
login name: DBA, standard SQL login, member of sysadmins
DB Name: TEST
DBA is the owner of database TEST and a member of db_owners in the database. Using EM, if you look at Users in TEST database, the only entry you can find is DBA where both Names (user name Login Name) are the same: DBA. There's no entry for user dbo. (from BOL, dbo can not be deleted)
Run sp_helpuser gives out two rows.
user login name
dbo NULL
DBA DBA
I don't know what happened to this machine before. Any clue about the possible cause is highly appreciated.
Hong
I am trying to locate the "My Reports" folder on the SSRS site, but I dont think I am able to see it. I am an admin on the box with Browser, Content Manager, My Reports roles.
I also tried creating the folder manually and it says the folder exists but I cant see it.
I have also checked on the "Site Settings" and checked the box "Enable My Reports". What else am I missing here?
Thanks,
sj
Hi,
I am having a Data flow task in For each loop which will gets 100 sourcetable names and 100 target table names...
am having a simpleData flow task which trasferes from OLEDBSource to OLEDBDestination.
I am repeating the Dataflow task which transfers from sourcetablename extracted from for loop to a destination table var.
The problem am gettting is for the first table it is able to transfer correcly because I did mapping for those tables at design time...but for the next coming sourcetable-desttable (which r having different no of cols,datatypes) its giving Validation failed...and...needs to refresh metadata....
is there any way to refresh the metadata of Data flow task (I set the property of OLEDBSource validate external meta to false then also same error is coming)
Thanks
Radhika
Is there anyway I could run an Audit trace on SQl Server which records SQL Server System Admin Login/Logout , failed login and machine names I don't want the trace window to show on screen however would like a file generated for later viewing. Also due to Firewall issues we have, We don't have SQL tools enabled to connect to that server.
View 2 Replies View RelatedHi,
Can I create invisible table in SQL Server 2005?
Access(all versions) has this option if you add Usys_TableName.
The table will be invisible, but you can get data from it
Mark
When defaulted to Visible or Invisible, +/- displays correctly. But when using the Expression, + is always showing as the default even when a group is expanded. Is this expected? TIA.
Publisher: SQL Server 2000 SP4
Subscriber: SQL Server 2005 Mobile Edition
Sometimes, after a failed merge replication(due to communication error) some rows on the subscriber became invisible for the publisher.
I've reproduced a case:
[START Short Version]
All rows inserted between a comm failed sync and a fine sync became invisible.
This seems to be caused because the subscriber keeps generating rows with the same generation number and the publisher doesn't look for this generation anymore.
[END Short Version]
[START Detailed case]
STEP 0: INITIAL STATE
Publisher
Orders Table
EMPTY
Subscriber
NO DATABASE
STEP 1: After FIRST SYNC and INSERTING 2 Orders
Publisher
Orders Table
EMPTY
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC000001 4 4 81000002 4 4 81
STEP 2: After SECOND SYNC
Publisher
Orders Table
OrderId
000001
000002
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
STEP 3: INSERT ANOTHER ORDER
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
STEP 4: After THIRD SYNC (with comm error)
Error: [NativeError:28037][HRESULT:-2147012889]->[A request to send data to the computer running IIS has failed. For more information, see HRESULT.]
When: Error happens provoked after sending from Subscriber to Publisher but before ending syn process.
Publisher
Orders Table
OrderId
000001
000002
000003
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
Note: Publisher has the row but subscriber keeps the state in 81.
STEP 5: INSERT ANOTHER ORDER (BEFORE A GOOD SYNC)
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
Note: Orders 000003 and 000004 have the same system info
STEP 6: After FOURTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
Note: Even with a fine merge process Publisher didn't get the 000004 row and the Subscriber didn't update the __sysMC
STEP 7: INSERT ANOTHER ORDER
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
000005 8 8 81
STEP 8: After FIFTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
000005
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 81
000004 6 6 81
000002 8 8 80
Note: Data from generation 8 merge correctly, but data from generation 6 keeps invisible to publisher.
STEP 9: DUMMY UPDATE ON GEN 6 ROWS
Action: I made a non relevant update to force the Subscriber update the generation.
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 10 81
000004 6 10 81
000005 8 8 80
Note: sysCG get its value updated correctly.
STEP 10: After SIXTH SYNC
Publisher
Orders Table
OrderId
000001
000002
000003
000004
000005
Subscriber
Orders Table
OrderId __sysIG __sysCG __sysMC
000001 4 4 80
000002 4 4 80
000003 6 6 80
000004 6 6 80
000002 8 8 80
Note: Data merges correctly.
[END Detailed case]
I could code a system that checks all the publication tables and updates all the last generation rows in case of communication error but i would really like to avoid doing it.
I don't know if I'm missing something or if this is a bug or a known issue.
This is a big problem for me because communication errors on cellular phone based connection are quite common and users keep working even if there's an error.
Any comment will be appreciated.
I have a table which visibility can be toggled by a text box. By default it is invisible. After it is made visible, clicking a sortable column header makes the table invisible. Does this mean sorting makes the table go back to its default visibility?
Hi, I have 3 report parameters.
If a user selects 'value1' from the first parameter list then parameter list 2 & 3 should be open for the user to make their selection. BUT if the user selects 'value2' from parameter 1 then only parameter list 2 should be open and parameter list 3 invisible. Is this possible??
HI
I have the following scenario in my report.
-The data is displayed in a table
-The table groups by one field
-Each table row calls a subreport
-There is about 6 paramaters in the report
-The last paramater of the list of paramters is a multivalue paramater and based on what is selected in the list the corresponding subreport must be shown.
-So i use a custom vbscript funtion to determine if a specific value was selected or not.
This functionality is working fine.
My problem is if the user does not select all the values in the multi select then i want to make the row invisble
and remove the whitespace so that there is not a gap between the other subreports which is shown.
I can make the subreport invisible inside the row but there is still the white space which does not display very nicly.
How can i make the row invisible if the vbscript function that is called returns a false value?
Here is the funtion I call -> Code.InArray("ValueToSearchFor", Parameters!MultiValueDropDown.Value)
The Function returns a true or false.
Thanks.
I am joining on table A AND Table B ON the accountnumber field. The accountnumber on the tblB has some invisble characters at the end, ie "12344 ". The Table A does not have these invisble chars and is "12344".
Due to the extra spaces at the end, the join fails and does not find a match for that acctno. I have used ltrim(rtrim) hoping that will elimante the extra spaces and find a match.
Heres my qry:
select * from Tbla a
inner join tblb B
on ltrim(rtrim(ACCTNO))=ltrim(rtrim(ACCT))
How do I do this, so that it finds a match and returns the acctno.
Hi.
I found unpleasant issue within RS:
1. Imagine RS report with Table(with interactive sorting) whose visibility is toggled by Textbox:
2. After sorting the Table the Textbox is getting collapsed making the Table invisible. But the Table should remain visible.
Is this MS bug? Are there workarounds?
If my question is not understandable I can send simple *.rdl report with sample.
Thank you in advance for help.
I have been tring to get this one line figured out for a few days now.
'Job2 Info
Dim selectSQL2 As StringselectSQL2 = "SELECT * FROM '" & CompanyKey & "'" '<<-------HERE
Dim cmd2 As New SqlCommand(selectSQL2, con)
'Job2 Select
Try
con.Open()
reader = cmd2.ExecuteReader()
(I have the full code below.) So here is the problem, this code is not populating the datagrid. There is data in the table I am selecting from. When I log in, my CompanyKey value displays in the label as "21". When I take out the "CompanyKey" variable, and just type in 21, the grid is populated. It is confusing the heck out of me. I have tried it this way:
selectSQL2 = "SELECT * FROM [" & CompanyKey & "]"
-and this way:
selectSQL2 = "SELECT * FROM & CompanyKey
and all the other ways I could think of. I researched it and can just not get it to work any way I do it. Any suggestions? Full code below:
____________________________________
Imports System.DataImports System.Data.CommonImports System.Data.SqlClient
Partial Class _Default
Inherits System.Web.UI.PageProtected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")
'Job1(Info)Dim currentUserID
currentUserID = Context.User.Identity.Name.ToString()
Label1.Text = currentUserID
Dim selectSQL1 As StringselectSQL1 = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"
Dim cmd1 As New SqlCommand(selectSQL1, con) Dim reader As SqlDataReader
Dim CompanyKey
'Job1 Select
Try
con.Open()
reader = cmd1.ExecuteReader()Do While reader.Read()
CompanyKey = reader("CompanyKey").ToString()
Loop
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
Finally
con.Close()
End Try
'Job2 Info
Dim selectSQL2 As StringselectSQL2 = "SELECT * FROM [" & CompanyKey & "]"
Dim cmd2 As New SqlCommand(selectSQL2, con)
'Job2 Select
Try
con.Open()
reader = cmd2.ExecuteReader()
GridView1.DataSource = reader
GridView1.DataBind()
reader.Close()Catch err As Exception
ReaderError.Text = "Error selecting record."
ReaderError.Text &= err.Message
Finally
ReaderResults.Text = CompanyKey
con.Close()End TryEnd Sub
End Class
I have a couple reports that have parameters on them. Problem is when the report is printed, the parameters are not displayed.
To solve this, I have added the selected values to the header section of the report in a text box. I now want to find away to hide these values when the report is being viewed on screen but visible when printed. Any suggestions are welcome. Thanks
Hi, i'm very new to asp and i have a small question - If i have a control on my webpage, like "CurrentUser" (which is System.Web.UI.WebControls.LoginName), how can i use it in a query? I want a query which will return all records pertaining to the current user. If i was writing the query in normal SQL i would write the following: SELECT Date, JobID, EmployeeIDFROM TblTimeslotWHERE TblEmployee.EmployeeName = (The "CurrentUser" on the webpage) AND TblEmployee.EmployeeID = EmployeeID Thanks very much for your helpBen
View 1 Replies View RelatedIs it not possible to execute one package and then design another package? I am executing one package and trying to design another package and just have a grey window in the control tool box that says:
"there are no usable controls in this group. Drag an item onto this text to add it to the toolbar"
Can I only get my controls by dragging when another package is executing? Where do I drag them from?
Thanks,
Kayda
Hi all,
I am trying to develop a CustomReportItem similar to Matrix control. Is it possible to add some "OnClick" sort of events to a section of this CRI (As a drilldown button of matrix control allows to expand the respective column).
Please help me if there can be any solution.
This is pretty weird... any controls past the halfway horizontal point of the report get pushed into page 2. The leftmost control is not affected just those to the right of it. It's like there is an invisible tab after the leftmost control. Smaller (not leftmost controls) (not past the middle of the page) are also pushed way to the right (just not into a new page)
Is there some property (that I'm not aware of) that does this? It doesn't matter if I use textboxes or lines. I have not changed any of the default control properties. flow layout is still LTR.
In my current report I have questions and answers on separate lines...I can't place them next to each other or it screws up the pagination.
I start with a new report and it does not do this but as soon as I add 2-3 vertical pages (over 11' x 2) This starts happening.
Has anyone experienced this?
Hello everyone, I'm trying to get a count of 3 different types on the same field. For Example, let's use Gender as the field with these options: Male, Female, Not Given. What I'm wanting to do is retrieve a count for each type. What I have so far is: SELECT COUNT(Gender) WHERE Gender = 'Male' and I have to duplicate this in 3 different data controls. I would like, however, to have one datasource control with a statement along the lines of: SELECT ( SELECT COUNT(Gender) FROM Users WHERE Gender='Male), SELECT COUNT(Gender) FROM Users WHERE Gender='Female', SELECT COUNT(Gender) WHERE Gender='NotGiven' ) From UsersOr something to that effect. Any suggestions?Thank you greatly for your help,Mark
View 2 Replies View RelatedI created a user control file with 3 properties. I would like to call this user control in a datalist control in the hosting page and pass the properties from a sqldatasource control. To this end I have a code like below;
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"SelectCommand="SELECT [1], [2], [3] FROM [table1]"></asp:SqlDataSource>
<asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1" DataMember="DefaultView" >
<ItemTemplate>
<uc:kk ID="kk1" runat="server" One='<%# Eval("1") %>' Two='<%# Eval("2") %>' Three='<%# Eval("3") %>' /></ItemTemplate></asp:DataList> I don't get any errors when I run the page, however it won't work as I wish. Only thing that appears in the rows of datalist is "01.01.0001 00:00:00".
Hello All,
I am recieving this error using vs2005. I am using the login controls which creates a mdf file. i am not using sql server 2005 in this program. The program runs well in my local machine, but as soon as i publish the site, i recieve this error after i login into the site.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
does anyone know why?
thank you,
kagome
Hello !
i am new to databases so i would be grateful for your help.
I am using SQL Server 2000 and vb to access and update the records of a database.
I want your opinion about the way i am displaying data.
I have created a form with textboxes etc. which display the fields
of the table.
Now when i load the form i populate a recordset with a
"select ... from... " query.
Then i manually
set
txtfield1.text=cstr(recordset.fields("field1").value)
etc...
If i want to update the table then i have to construct manually the
query.
"update ... set field1='"+ txtfield.text +"' "
if i want to move to a next record i do
recordset.movenext
and then
txtfield1.text=cstr(recordset.fields("field1").value)
again
Is that good or should i use bound controls ?
If multiple users access the same form at the same time (from different computers) will they be locked only when they save (update) data ?
Thank you !
Hi,
i want to create dynamic controls using wpf and c#.
can any body send me some code snippet.
for example:-
one of my window page have 100s of fields like textbox, checkbox and date controls in a group inside different grid and panel.
now if admin has made that amoung 100 fields user should be able to see only 20 or 30 fields.
how will i do so, just making the fileds invisible won't work, coz all the fields should be visible from top of the form,
means i want to push all the visible fields at the top.
what are the best way to do so.
need it urgent
thanx a lot
I am doing 350 controls as in a form like in reporting service . Due to so many controls the reporting sql server after deployment the preview and report must be slow. and i will checked the data transmission in stored procedure from sql server it will be faster.I am having doubt in controls in form will be slower.
Is there any suggestions without decrement the controls and to be report will be faster.
sir
i have uploaded my website but there is a problem
It is working very well wneh on the local host
but when uploaded on the web server the login control is not validating the users of the database
also i have added a CAPTCHA control
and that is giving an error that the cobe u entered is not matching
u can even check this error
My Url is http://www.webgrowthengine.com
click on the login button
user name: "aaaa" (Excluding the quotes)
password: !@#$%^& (Press shift+ 1234567)
plzhelp me
Nitin
Hi ... hope you can help.
I would like to use the Data Mining Web Controls which ship with the MSSQL2005 Beta 2. The installer (BetaAnalysisServicesSamples.MSI) is supposed to create a new virtual directory and should also create the DataMiningHTMLViewers.dll according to "ReadMe_Data_Mining_Web_Controls.rtf"
But the MSI only creates a few new directories with the source code and a deployment project (DMHTMLViewersSetup.vdproj) which won't open with VS2003. The solution apears to be for VS2005.
How do I install the Web Controls?
RS 2005
I have a matrix item in a report. It is only about 7cm in width in design mode but obviously explodes out to about 30cm in when the report is run as thats the way the query behind it works.
The problem is any control e.g. a chart placed above and to the right of the matrix in design mode gets pushed across to the end of the matrix's width when the report is run, which causes extra pages in the report.
Other controls placed directly above the matrix in design mode hold their position when the report is run, it is only those controls placed further right than the end of the matrix (and above the matrix) in design mode that get pushed across. Why is this, is there a way to fix it?
Thanks
N
After resolving all the installation and configuration related issues, I was able to deploy a couple of projects on my report server. I can see alll folders and reports listed inside the folders from http://<servername>/reports . All works fine except when I run a report, the http://<servername>/Reports/Pages/Report.aspx page does not render report.
This page displays View, Properties, History Subscriptions etc, menu items on the top section of the page. It also displays Home, My Subscriptions, Site Settings, Help etc. links on top right corner of the page. I can also see the bar that has "New subscription" button. But the problem starts from the section below that. It does NOT display the Report navigation bottons (like First page button, Next Page button, previous page button, Last page button, print button etc.) Appears that the icons images for these bottons are missing. And above all, the page does not render report.
IE browser status indicate the following error:
error:'HoevrImagectl161_ctl01_ctl01_ctl06_ctl01' is null or not an object.
The report renders fine via http://<servername>/ReportServer/Pages/ReportViewer.aspx
I may not have explained the problem well here however, if you are interested, I can email you the screenshot of Report.aspx to help you understand the problem.
Any help is appreciated!!!