Is MARS Supported
Feb 9, 2007Does the Compact edition support the MARS feature (multiple active result sets) of SQL Server 2005?
View 3 Replies
ADVERTISEMENT
MARS
Jun 18, 2008What's the benefit of Multiple Active Result Sets? When would you use it. Read the BOL article but still not quite sure what its use is. there doesn't seem to be a performance gain. So what's the purpose?
View 5 Replies View RelatedUsing MARS And Sql Server..
Mar 17, 2008We have had a SQL server 2005 database up and running for some time and now we are getting this error:
[The server will drop the connection, because the client driver has sent multiple requests while the session is in single-user mode. This error occurs when a client sends a request to reset the connection while there are batches still running in the session, or when the client sends a request while the session is resetting a connection. Please contact the client driver vendor.]
We use MARS in our Windows Application (.NET 2.0) and can not seem to figure out what is going on...
After this error shows up in the event viewer, we get a second error (milliseconds later) in our application. "A severe error occurred on the current command. The results, if any, should be discarded."
i really need help on this one... it seems it is not with our SP but the connection to SQL Server 2005 Express and using MARS... i double checked the connection string and it is all setup correctly and we are in Multi-User Mode.
PLEASE HELP!
ward0093
Mars Connection Problem
Jul 19, 2007I am trying to make a connection to an SQL database held on myserver I am able to connect through a machine data source using access using the credentials as below the attempt fails at con.open with following error:
System.Runtime.InteropServices.COMException was caught
ErrorCode=-2147467259
Message="Named Pipes Provider: Could not open a connection to SQL Server [53]. "
Source="Microsoft SQL Native Client"
StackTrace:
at ADODB.ConnectionClass.Open(String ConnectionString, String UserID, String Password, Int32 Options)
at Client_Access.JobRequest.AddJob_Click(Object sender, EventArgs e) in C:Documents and SettingsRobertMy DocumentsVisual Studio 2005Projects Client Access Client AccessJobRequest.vb:line 392
Dim con As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim sPassword As String, sUserID As String
sPassword = "abcde"
sUserID = "cClient"
Try
con.ConnectionString = "Provider=SQLNCLI;" _
& "Server=(myserver);" _
& "Database=transportRecs;" _
& "Integrated Security=SSPI;" _
& "DataTypeCompatibility=80;" _
& "UID=" & sUserID & ";" _
& "PWD=" & sPassword & ";" _
& "MARS Connection=True;"
Dim mySQL As String
mySQL = "SELECT * FROM dbo_jobitem " '& _
'" WHERE [Custid] ='" & strTag & "'"
con.Open()
rst = New ADODB.Recordset
With rst
.ActiveConnection = con
.CursorLocation = ADODB.CursorLocationEnum.adUseClient
.CursorType = ADODB.CursorTypeEnum.adOpenStatic
.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
.Open(mySQL)
.MoveLast()
.MoveFirst()
.MoveLast()
.MoveFirst()
Debug.Print(.RecordCount)
End With
Catch ex As Exception
MsgBox(ex.ToString)
Finally
If (con.State = ConnectionState.Open) Then con.Close()
End Try
Can anyone help.
Regards,
Joe
MARS Issue With Typed DataSets?
Aug 2, 2007I have a DAL that uses Typed DataSets (not directly, the DAL references and calls the dataset methods) and I am receiving a "There is already an open DataReader associated with this Command which must be closed first." error when I render an ASP.NET page where two imgs need to retrieve two different versions of an image (a thumbnail and a full sized image).I am using SQL Server 2005, ASP.NET 2.0, and my connection string includes the MARS attribute set to true. This is the method in the SqlServer DAL, _images is a typed table adapter:public override Image SelectImage(Guid? id) { // TODO: Find out why MARS feature isn't working! DataSet.ImageDataTable dt = _images.SelectImageById(id); <-- Exception occurs here if ((dt != null) && dt.Count == 1) { DataSet.ImageRow row = dt[0]; Guid? keyId = null; if (!row.IsKeyIdNull()) { keyId = row.KeyId; } // Success return new Image(row.Id, keyId, row.Path, row.Caption); } return null; } // This is the method that is called for both images, which calls the DALpublic class EntitySearch{ public static Image ImageById(Guid id) { return _dal.SelectImage(id); }}// These are the code-behind methods that the image response strings will come from...imgThumbnail.ImageUrl = String.Format("../Services/ImageBroker.aspx?img={0}&mode=Thumbnail", image.Id);imgFullImage.ImageUrl = String.Format("../Services/ImageBroker.aspx?img={0}&mode=Image", image.Id); // And finally here is the code in the broker class that saves the images to the response streamImage image = EntitySearch.ImageById(imageId);using (Picture picture = (mode == ImageMode.Image) ? image.Picture : image.Thumbnail){ Picture.Save(response.OutputStream, ImageFormat.Jpeg);}So the final snippet of code is being called twice, and it crashes. I have tried closing the connection and reopening it as a workaround but this only yields strange results, though it intermittently does load the images.Can anyone spot the issue?
View 1 Replies View RelatedDAC Not Supported.
Aug 7, 2006SQL2K5
SP1
Howdy all. I'm trying to open up Dedicated Admins Connection in Management Studio and getting "DAC's are not supported. (Object Explorer)"
Any idea's?
TIA, cfr
Top Not Getting Supported In Sqlserver2000
Nov 10, 2007Hi,
I have created the below procedure in SQL SERVER 2005.
But when I copy out the same in SQL SERVER 2000. I get an error at the underlined place. It says
Line 32: Incorrect syntax near '('.
ALTER procedure [dbo].[VTELcardvalidation1]
@CardValue1 int,
@CardValue2 int,
@CardValue3 int,@Result nvarchar(50)output
as
begin
declare @CrdPinNo varchar(100)
declare @CrdNo nvarchar(100)declare @count int
declare @inc int
declare @concat nvarchar(200)create table #temptable(crno nvarchar(50),pno nvarchar(50))
--First Card
--Change here
select @count=count(cardno) from vendorcardvalidation where cardvalue=1500 and flag=0if (@count)>@CardValue1
begin
declare cur1 cursor forselect top(@CardValue1) pin,cardno from vendorcardvalidation where cardvalue=1500 and flag=0 order by cardno
open cur1fetch next from cur1 into @CrdPinNo,@CrdNo
while(@@fetch_status=0)
beginupdate vendorcardvalidation set flag=1 where cardno=@CrdNo
insert into #temptable values(1500,@CrdPinNo)fetch next from cur1 into @CrdPinNo,@CrdNo
endclose cur1
deallocate cur1
set @Result='Success'end
else
begin
set @Result='Failure'
end
select * from #temptable
drop table #temptable
end
It seems the the word 'top' will not be supported in sqlserver 2000. What should I do?
Regards
cmrhema
Interface Not Supported
Jul 17, 2000I have the following VB function. The stored proc that is being called
("GetList") inside the function does a simple SQL Select statement against
an SQL Server 7 database using OLE DB. I'd like to store the result of the
SQL Select statement in the "Rs" parameter to pass back to the calling
function. Whenever I call this function, I get an error message stating "No
Such Interface Supported". Does anyone know why I cannot do this?
Also, this function is being called from ASP code. That's why the "Rs" is
passed as a variant. It's created in the ASP code before this function is
called.
------------------------------------------
Function GetAddressDropDownList(Rs As Variant, CustomerId As Long)
Dim ProcComm
Dim Parameter
Set ProcComm = CreateObject("ADODB.Command")
ProcComm.CommandType = adCmdStoredProc
ProcComm.CommandText = "GetList"
Set Parameter = ProcComm.CreateParameter("CustomerId", adInteger,
adParamInput)
Parameter.Value = CustomerId
ProcComm.Parameters.Append Parameter
Set Parameter = Nothing
ProcComm.ActiveConnection = BuildConnectionString()
Rs.CursorLocation = adUseClient
Rs.Open ProcComm, , adOpenForwardOnly
Set Parameter = Nothing
Set ProcComm = Nothing
End Function
How Many Apps Supported?
Sep 9, 1999How many "applications" can be loaded onto Microsoft SQL Server 6.5?
Additional Information:
The OS platform is Windows NT Server 4.0 (SP5) on a Compaq ProLiant 1600 (PII 450) with 256Mb RAM
Proposed applications, although this probably will mean little, are Dataview (club membership) Peterborough (payroll) and Positive (HR).
Any assistance would be appreciated.
Thanks
Robert
robert@whiteley.com
SUM(x) OVER (PARTITION BY Y) Supported?
Mar 7, 2008SUM(qtycolumn) OVER (PARTITION BY columnA, Column B)
is this function supported by Sql Ce?
Is SQL 2000 32 Bit Supported
Dec 27, 2006Hello All,
I need to know if SQL 2000 32 bit is supported on a Windows 2003 64 bit on a x86 processor server. The server is clustered.
OPENXML Supported In CE 3.5?
Oct 2, 2007
I am viewing a list of the reserved keywords for CE 3.5 and OPENXML is listed. Can you please tell me how I would implement this in CE 3.5? Since only one SQL statement can be sent with a SqlCeCommand then how can you prepare the document, access the xml data with OPENXML, and then close the document handle all in one call? For example, I have the following TSQL code in a SQL Express stored procedure and need to port it over to CE 3.5. Could you please help with some great ideas on how to go about this porting task?
CREATE PROCEDURE [SaveConfigurationMiscs]
(@XmlData Text)
AS
SET NOCOUNT ON
DECLARE @iDoc Int
/* Create an internal representation of the XML document. */
EXEC sp_xml_preparedocument @iDoc OUTPUT, @XmlData
/* Dump XML Data into an in memory table */
DECLARE @ConfigurationMiscs TABLE (
ConfigurationMiscID Int,
ActiveLaunchMonitor NVarChar(50),
UseModeledShots Bit,
DeleteRecord Int
)
INSERT INTO @ConfigurationMiscs (ConfigurationMiscID, ActiveLaunchMonitor, UseModeledShots, DeleteRecord)
SELECT X.ConfigurationMiscID, X.ActiveLaunchMonitor, X.UseModeledShots, X.DeleteRecord
FROM OPENXML (@iDoc, '/xml/ConfigurationMisc')
WITH (
ConfigurationMiscID Int,
ActiveLaunchMonitor NVarChar(50),
UseModeledShots Bit,
DeleteRecord Int
) X
/* Clean up XML resources */
EXEC sp_xml_removedocument @iDoc
/* Update */
UPDATE Table_ConfigurationMiscs
SET
Table_ConfigurationMiscs.ActiveLaunchMonitor = X.ActiveLaunchMonitor,
Table_ConfigurationMiscs.UseModeledShots = X.UseModeledShots
FROM ConfigurationMiscs Table_ConfigurationMiscs
INNER JOIN
@ConfigurationMiscs X ON Table_ConfigurationMiscs.ConfigurationMiscID = X.ConfigurationMiscID
WHERE
X.ActiveLaunchMonitor IS NOT NULL AND
X.UseModeledShots IS NOT NULL
/* Insert New */
INSERT INTO ConfigurationMiscs (ConfigurationMiscID, ActiveLaunchMonitor, UseModeledShots)
SELECT X.ConfigurationMiscID, X.ActiveLaunchMonitor, X.UseModeledShots
FROM @ConfigurationMiscs X
LEFT JOIN
ConfigurationMiscs Table_ConfigurationMiscs ON Table_ConfigurationMiscs.ConfigurationMiscID = X.ConfigurationMiscID
WHERE
Table_ConfigurationMiscs.ConfigurationMiscID IS NULL AND
X.ActiveLaunchMonitor IS NOT NULL AND
X.UseModeledShots IS NOT NULL
/* Delete Old */
DELETE Table_ConfigurationMiscs
FROM ConfigurationMiscs Table_ConfigurationMiscs
INNER JOIN
@ConfigurationMiscs X ON Table_ConfigurationMiscs.ConfigurationMiscID = X.ConfigurationMiscID
WHERE
X.ConfigurationMiscID IS NOT NULL AND
X.DeleteRecord IS NOT NULL
RETURN
GO
Supported OS List?
Mar 10, 2008Is there a _complete_ known good list of OS support for sql express 2005? Is is going to install on vista home basic, etc.?
View 1 Replies View RelatedWhen Will It Be Fully Supported?
Mar 23, 2006Having sucessfully tested mirroring, I've suggested we should implement it at my place of work.
However, they are non too pleased that it is not yet officialy part of SQL Server 2005 and therefore not supported, does anyone know when it will be in standard edition? because I really really need to know...
Thanks
Keyword Not Supported: ',server'.
Jun 27, 2006Hello there.
I'm developing an eCommerce solutions based on the ASP.NET 2.0 Commerce Starter Kit, architechture. It uses the Provider Pattern. In my web-application, i use the CatalogProvider, to retrieve data from a SQL Server 2005 database. I call the methods through a handler class, whoch excists inside the WebApp. I also use a ShoppingCartProvider, OrdersProvider, ShippingProvider etc. in the same way.
In my Web.Config file, i have all the provers listed, and on each provider, the name of the connectionString to use are given.
My connection string looks like this:"connString" connectionString="Server=xxxx;Database=xxxx;Trusted_Connection=True;" providerName="System.Data.SqlClient" />
The problem is, that suddently, when browsing the website, that connects to the database through the providers, i get this error:
Keyword not supported: ',server'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: Keyword not supported: ',server'.Source Error:
Line 31: public static IDataReader GetProductsByCategory(int categoryID)
Line 32: {
Line 33: return Commerce.Providers.CatalogProvider.Instance.GetProductsByCategory(categoryID);
Line 34: }
Line 35:
Source File: d:DevelopmentASPNETSeoShopApp_CodeHandlersCatalogManager.cs Line: 33 Stack Trace:
If i then go back to my web.config file, and removes the providerName section, of the connectionString, the website works again, for a short period. When the error return, i undo the deletion of the providerName, and it will work again... For a short time...
I've also tried to use another connectionsString, like this:Data Source=Aron1;Initial Catalog=pubs;Integrated Security=SSPI
But then the keyword which is not supported is: ', data source'
Does anyone know what the issue might be?
Thanks in advance...
Error: Keyword Not Supported: 'dsn' In Asp.net
Jun 10, 2008hi,i am trying to connect sql server 2005 from my asp.net applicationi have create DSN for this ..then i am getting the following errorKeyword not supported: 'dsn'. in sql serverplease provide me the solution
View 5 Replies View RelatedKeyword Not Supported: 'driver'
Apr 5, 2004y am i having keywork not supported? is there anything wrong with my connection string ??
==========web config================
<appSettings>
<add key="db" value="icms" />
<add key="db_user" value="sqladmin" />
<add key="db_server" value="server" />
<add key="db_pwd" value="12345" />
<add key="session_timeout" value="600" />
</appSettings>
==========DB.vb==============
Dim myDB As New SqlConnection
Dim myCMD As New SqlCommand
Public Sub New()
Dim db_server = AppSettings("db_server")
Dim db = AppSettings("db")
Dim db_user = AppSettings("db_user")
Dim db_pwd = AppSettings("db_pwd")
Dim DBConnection As String = "DRIVER={SQL Server};" & _
"SERVER=" & db_server & ";" & _
"DATABASE=" & db & ";" & _
"UID=" & db_user & ";" & _
"PWD=" & db_pwd & ";" & _
"OPTION=3;"
myDB.ConnectionString = DBConnection
myCMD.Connection = myDB
End Sub
=============================
Sql Server And Supported Codepages
Apr 12, 2004Hello community!
Short question:
how can i retrieve all code pages that MSSQL server is installed with?
Thank you in advance for your help.
'Use Encryption For Data' Is Not Supported
Sep 4, 2001The error in the subject line "The property 'Use Encryption for Data' is not supported" is encountered when running a DTS package via a job step in SQL Server 7.0. The problem is not encountered when executing the DTS package interactively via Enterprise Manager from my PC. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on my PC, I notice a Use Encryption for Data Property. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on the Server, the Use Encryption for Data Property does not appear. Service Pack 3 for SQL 7.0 is installed on both my PC and on the SQL Server. I suspect this Property difference for OLE DB could be related to the fact that I installed Enterprise Manager for SQL 2000 on my PC at one time and then uninstalled. Any ideas how to correct this situation?
View 1 Replies View RelatedALLOW_DUP_ROW' Is No Longer Supported
Feb 15, 2007Any body please give me the details about how to use 'ALLOW_DUP_ROW' in a CREATE CLUSTERED INDEX statement.
I tried executing the below statement but it throws an error "CREATE INDEX option 'ALLOW_DUP_ROW' is no longer supported."(both in SQL Server 2000 and SQL Server 2005)
CREATE CLUSTERED INDEX index121
ON raj(j)
WITH ALLOW_DUP_ROW
raj(j) contains two rows with same value
please hhelp me out
SQL Mobile - Locale Not Supported
Jan 19, 2006I am working on the sample SQL Mobile application as located at:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppcgen/html/med302_msdn_sql_mobile.asp?frame=true
I am getting a SqlCeException as:
"The specified locale is not supported on this operating system."
The error is being thrown at line: int returnValue = this.Adapter.Fill(dataTable);
in the autogenerated code of SqlMobileDataSet.Designer.
My machine is Win XP SP2 (Hindi LIP installed). I am running VS 2005 and SQL 2005 (RTM). I am testing using DMA transport on Win Mobile 5.0 PPC Emulator.
Could someone suggest what steps do I need to take to solve this issue?
Cheers
Abhishek
NOCHECK Constraint Supported?
Sep 28, 2007Is a NOCHECK constraint supported in CE 3.5? The keyword is listed in the 3.5 BOL but when attempting to ALTER TABLE using WITH NOCHECK the statement fails.
If it is not supported then is there a work around for it?
TIA
Locale Not Supported Error
Jan 22, 2007
I am using Vista and when I try to open one of the Business intelligence reports, I get error "Locale 16393 not supported". Any clue on this ?
Thanks
.rss Methods No Longer Supported
Feb 9, 2006I am having a problem running a sql2k report service script on my new sql2005 server. It seems that the methods SessionHeader() and rs.render are no longer suport. can someone help me figure out what I need to do to continue automating my report running?
rss file contents: (the parts that should matter)
-----------------------------------------------------------------------------------------
Report Parameters
Dim branch as string = nothing
Dim skipreport as string = nothing
dim skip as integer = 0
dim allbranchreport as string = nothing
dim allbranch as integer = 0
dim report as CatalogItem
dim repname as string = nothing
dim specificreport as string = nothing
dim filepath as string = nothing
dim errorpath as string = nothing
dim basefilepath as string = nothing
dim baseerrorpath as string = nothing
dim errorlog as integer = 0
Dim parameters() As ParameterValue = nothing
Dim paramcount as integer = 0
' Render arguments
Dim result As Byte() = Nothing
Dim reportPath As String = nothing
'Dim format As String = "PDF"
Dim format as string = "EXCEL"
Dim historyID As String = Nothing
Dim devInfo as string = Nothing
Dim credentials As DataSourceCredentials() = Nothing
Dim showHideToggle As String = Nothing
Dim encoding As String
Dim mimeType As String
Dim warnings As Warning() = Nothing
Dim reportHistoryParameters As ParameterValue() = Nothing
Dim streamIDs As String() = Nothing
Dim sh As New SessionHeader()
rs.SessionHeaderValue = sh
Dim omitdocmap as string = "True"
'**************************************
'**************************************
'Repset run
Dim repset as string = ""
for each repset in repsetlist
specificreports = specificreportsstart
if specificreports = 0 then
select case repset.tolower
case "all"
specificreports = 0
case "brkctr"
specificreports = 1
reportcount = reportset_brkctr.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_brkctr(reportloop)
next
case "cashmgmt"
specificreports = 1
reportcount = reportset_cashmgmt.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cashmgmt(reportloop)
next
case "com"
specificreports = 1
reportcount = reportset_com.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com(reportloop)
next
case "com_vw"
specificreports = 1
reportcount = reportset_com_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com_vw(reportloop)
next
repset = "com"
case "comcons"
specificreports = 1
reportcount = reportset_comcons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_comcons(reportloop)
next
case "cons"
specificreports = 1
reportcount = reportset_cons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons(reportloop)
next
case "cons_vw"
specificreports = 1
reportcount = reportset_cons_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons_vw(reportloop)
next
repset = "cons"
case "dep"
specificreports = 1
reportcount = reportset_dep.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_dep(reportloop)
next
case "staff"
specificreports = 1
reportcount = reportset_staff.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff(reportloop)
next
omitdocmapbranch = "False"
case "staff2"
specificreports = 1
reportcount = reportset_staff2.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff2(reportloop)
next
omitdocmapbranch = "False"
case else
specificreports = 1
redim specificreportslist(0)
specificreportslist(0) = "Undefined"
end select
if repset.tolower = "staff2" then repset = "staff"
End if
'Base values
basefilepath = basepath & client & "" & repset & ""
baseerrorpath = basepath & client & "" & "error_" & repset & "_"
'Reports List
Dim reports() as CatalogItem
reports = rs.ListChildren(basereportpath, False)
'Execution
if datasourceok = 1 then
for each report in reports
skip = 0
allbranch = allbranchrun
for each skipreport in skipreports
if report.name.tolower = skipreport.tolower then skip = 1
next
if skip = 0 then
if specificreports = 1 then
skip = 1
for each specificreport in specificreportslist
if report.name.tolower = specificreport.tolower then skip = 0
next
end if
end if
if skip = 0 then
for each allbranchreport in allbranchreports
if report.name.tolower = allbranchreport.tolower then allbranch = 1
next
Redim parameters(1)
parameters(0) = New ParameterValue()
parameters(0).name = "branchall"
parameters(1) = New ParameterValue()
parameters(1).Name = "branch"
'5 parameters reports
repname = report.name
if (repname.substring(0,5).tolower = "loans" or repname.substring(0,4).tolower = "locs") then paramcount = 4
if (repname.length >= 13) then
if repname.substring(0,13).tolower = "loans_beacons" then paramcount = 1
end if
if paramcount = 4 then
paramcount = 0
redim preserve parameters(4)
parameters(2) = New ParameterValue()
parameters(2).name = "comconsall"
if repset.tolower = "cons" or repset.tolower = "com" then parameters(2).value = 0 else parameters(2).value = 1
parameters(3) = New ParameterValue()
parameters(3).Name = "comcons"
if repset.tolower = "com" then parameters(3).value = "commercial" else parameters(3).value = "consumer"
parameters(4) = New ParameterValue()
parameters(4).Name = "brokered"
parameters(4).value = 0
if repset.substring(0,3).tolower = "brk" then parameters(4).value = 1
end if
'All Branches Reports
if allbranch = 1 then
parameters(0).value = "1"
parameters(1).value = "admin"
if client = "CSCU" then parameters(1).value = "newwst"
if clienttype = "vw" then parameters(1).value = "1"
errorlog = 0
filepath = basefilepath & report.name & ".xls"
errorpath = baseerrorpath & report.name & ".txt"
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapall
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " All branches")
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
'Other Reports
else
parameters(0).value = "0"
for each branch in branches
parameters(1).value = branch
errorlog = 0
if branch <> "h/o" then
filepath = basefilepath & branch & "" & report.name & ".xls"
else
filepath = basefilepath & "ho" & report.name & ".xls"
end if
if branch <> "h/o" then
errorpath = baseerrorpath & branch & "_" & report.name & ".txt"
else
errorpath = baseerrorpath & "ho_" & report.name & ".txt"
end if
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapbranch
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " " & "Branch: " & branch)
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
next
end if
end if
next
end if
next
----------------------------------------------------------------------------------------------------
I get this error message from cmd when I try and run my batch:
----------------------------------------------------------------------------------------------------
J:PRA Publisher>rs -i pra_publisher.rss -s http://localhost/reportserver -l 0
The specified script failed to compile with the following errors:
J:PRA Publisher> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727vbc.exe" /t:exe
/main:MainModule /utf8output /R:"System.dll" /R:"System.Xml.dll" /R:"System.Web
.Services.dll" /R:"C:Program FilesMicrosoft SQL Server90Toolsinn
s.exe" /
out:"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.exe" /debug-
"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.0.vb" "C:Docu
ments and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb"
Microsoft (R) Visual Basic Compiler version 8.0.50727.42
for Microsoft (R) .NET Framework version 2.0.50727.42
Copyright (c) Microsoft Corporation. All rights reserved.
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(253) : error
BC30002: Type 'SessionHeader' is not defined.
Dim sh As New SessionHeader()
~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(254) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
rs.SessionHeaderValue = sh
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(434) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID, de
vInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(436) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(496) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID
, devInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(498) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
--------------------------------------------------------------------------------------------------------------------
Any advice on how to fix this would be graetly appreciated. Thanks!
The NOT SQL Construct Or Statement Is Not Supported.
Sep 19, 2007I need to transmit data from a ##table to an .xls file. The data is exported only for the first time. However, after a while the table will be dropped by SQL Server 2005 automatically.
I'm using Execute SQL Task to check for the existence of an ##Table. And, if does not exists the ##table should be created or something like the example below.
Ex:
IF NOT EXISTS (
SELECT *
FROM ##StateProvince
)
SELECT * INTO ##StateProvince
FROM Person.StateProvince
GO
To keep the session of the ## Table active, but the following error is thrown :
The NOT SQL construct or statement is not supported.
BROKER_QUEUE_DISABLED Supported On SQL Express?
Jul 31, 2007
Is this event notification supported on SQL Express or no? I found it surprising that, despite seeing the correct entries in sys.event_notifications, I never received this event notification (BROKER_QUEUE_DISABLED) when the queue became disabled. Its my understanding that the only thing that will cause a queue to disable is 5 consecutive rollbacks, so I was suprised when I didn't get any indication that the queue turned off. The rollbacks would have occurred in a .NET application if that makes a difference, whereas my handling of the event notification was in SQL Express. This worked fine when testing on SQL Developer, by the way.
Thanks!
Sql Server CE Supported Classes
Jul 27, 2006ahi all
iam new to VS.net 2005 and iam trying to convert ready made application from vb.net 2003 to vb.net 2005
and i cant find the sqlcedataadapter
its a windows CE application uses SQL Server CE
and i imported the system.data.sqlsrverce
and i added the sqlserverce refrence
may be its a new classes?
Newbie Question: What's Supported And What's Not?
Jul 12, 2007Hi.
I'm just getting started with CE, and I'm a novice with SQL in general.
Can someone point me to the definitive source for what's supported in SQL Server CE v3.1? For example, I can't seem to use SELECT TOP, or even CREATE PROCEDURE.
BTW, is 3.1 the version I should be using?
Thanks.
The OVER SQL Construct Or Statement Is Not Supported.
Jun 14, 2007
Hi there,
I'm trying to run following script in sql command mode in OLE DB Source and it giving me "The OVER SQL construct or statement is not supported." error msg.
Code Snippet
Drop
Table #Tmp_EXT_AATransactions
Select row_number() over (partition by A3.jrnentry,A32.aaGLDistID order by A32.aaGLDistID,A33.aaTrxDimID ) as rownum,
A33.aaTrxDimID,
A33.aaTrxCodeID,
A3.jrnentry,
A32.aaGLDistID,
G2.TRXDATE,
A3.GLPOSTDT,
A3.aaTRXType,
A31.ACTINDX,
A32.DEBITAMT,
A32.CRDTAMNT,
(A32.DEBITAMT - A32.CRDTAMNT) AS Amount
into #Tmp_EXT_AATransactions
From dbo.AAG30000 A3
Inner Join dbo.AAG30001 A31
On A3.aaGLHdrID = A31.aaGLHdrID
Inner Join dbo.AAG30002 A32
On A31.aaGLHdrID = A32.aaGLHdrID
And A31.aaGLDistID = A32.aaGLDistID
Right Outer Join dbo.AAG30003 A33
On A32.aaGLHdrID = A33.aaGLHdrID
And A32.aaGLDistID = A33.aaGLDistID
And A32.aaGLAssignID = A33.aaGLAssignID
Inner Join dbo.GL20000 G2
On A3.jrnentry = G2.jrnentry
And A31.ACTINDX = G2.ACTINDX
And A31.SEQNUMBR = G2.SEQNUMBR
--Where A3.jrnentry in ( '54227','54222','54225')
Select [JrnEntry],
[aaGLDistId],
[TrxDate],
[GLPostDT],
[aaTrxType],
Isnull([1],0) as Dim1,
Isnull([2],0) as Dim2,
Isnull([3],0) as Dim3,
Isnull([4],0) as Dim4,
Isnull([5],0) as Dim5,
Isnull([6],0) as Dim6,
Isnull([7],0) as Dim7,
Isnull([8],0) as Dim8,
Isnull([9],0) as Dim9,
Isnull([10],0) as Dim10,
[ActIndx],
[DEBITAMT],
[CRDTAMNT],
[Amount]
into #Tmp_EXT_AATransactions_Final
From
(
Select [aaTrxDimID],
[aaTrxCodeID],
[aaGLDistID],
[JrnEntry],
[TrxDate],
[GLPostDT],
[aaTrxType],
[ACTINDX],
[DebitAmt],
[CRDTAMNT],
[Amount],
Row_Number() Over (Partition By [aaTrxDimID],[aaGLDistID],[JrnEntry] Order By [aaTrxDimID],[aaGLDistID],[JrnEntry]) RowId
From #Tmp_EXT_AATransactions
) as Data
Pivot
(
Max([aaTrxCodeID]) For [aaTrxDimID] in ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10])
) As PVT
Select *
From #Tmp_EXT_AATransactions_Final
I can parse and preview it successfully in OLE DB Source Editor but i can't see any columns in columns mapping. So when i click on Build Query in OLE DB Source Editor i get this error message. Also Its working fine in Management Studio so don't know what's the problem.
Regards,
Vivek
OVER Is Not Supported In Query Wizard Mode
Jul 15, 2007I'm using VS 2005, and I built a website with a TableAdapter method using the wizard.I hand wrote a line of code: 1 WITH srtAS
2 (
3 SELECT *,
4 ROW_NUMBER() OVER (ORDER BY date DESC) AS 'RowNumber'
5 FROM table1
6 )
7 SELECT *
8 FROM srt
9 WHERE RowNumber BETWEEN @start AND @end; I didn't find any syntax errors, but the Wizard keeps alerting "the over sql construct or statement is not supported." From my research, I found that it's caused by the Wizard that doesnt support some syntax. Afterall, the problem is:1. I have two parameters @start AND @end. normally if there is no "syntax error", then it will show in the TableAdapter: GetData(@Start,@end). But now since there is this "Syntax error", I won't load these two parameters.2. I saw some solutions to this "syntax error" problem, and they suggested to write query manually, don't use wizard. But I don't know how. thanks in advance-noPC-
CASE Is Not Supported Error In A View
Jun 28, 2000CASE is not supported Error in a View
In SQL 7, when a view parses the below code, it generates a 'CASE is not Supported' error'; however, it will still generate and show the field with the CASE statements correctly; What might cause this error?
(Other useful info: this code is from a converted SQL 6.5 DB and the SQL 7 is running in compatibility mode, i inserted '' to remove concantenation of NULL problems;)
Example of display:
10132 Hampton, VA: A. Deepak Publishing
SELECT PublisherID, Info = CASE WHEN City IS NOT NULL
THEN City + CASE WHEN State IS NOT NULL
THEN ', ' + State ELSE '' END + ': ' ELSE ''
END + Publisher
FROM tblLibraryPublishers
Thank you!
Llyal
Max. Memory Supported By Standard Edition
Aug 1, 2001I learned that SQL2000 Standard Edition can only support up to 2GB RAM, we have a WIN2K system on a server with 4CPU, 4GB RAM,
if we run SQL2000 Stanard Edition on it, will the 2 extra 2GB of RAM be wasted ?
Since there is a big diff. between licensing cost of SQL Standard and Enterprise, that's why the user choose Std. edition.
Any opinion or comment...
The Requested Properties Cannot Be Supported - Error
Mar 28, 2007I have a strange issue on my local test environment (Win XP Pro SP 2 - SQL server 2000 with SP4 and IIS 5.1 ), where I get an error in the Select statement if I do not include the database owner prefix, like "select * from patients where PID< 200".
If I change it to "Select * from hprs.patients where PID<200" it works fine.
However, in more complex SQL, where I have joins, and sub queries, I still get errors on my local test machine, but the live server works fine.
I use the calls in classic ASP pages on a web site and I did not get this before, only after I re-instaled SQL Server 2000 to fix another issue I had on my machine.
On the live server (also SQL Server 2000) I do not get the error.
Is there a setting I can change on my local dvelopment environment so that it is not a requirement to include the DB owner in the SQL?
Any help with this will certainly save me a lot of re writing tons of SQL so I can still test before publishing.
Thanks - Hans