Is Microsoft Going To Include KB940287 In A Cumulative Update?

Nov 15, 2007

Re: KB 940287 - Will it be in a Cumulative Update?
SYMPTOMS:


You use Service Broker in SQL Server 2005. When the initiating service starts a conversation and then sends a message, the initiating service ends the conversation immediately. However, after the target service processes the message, the endpoint on the target server is not deleted when the target service ends the conversation. Therefore, when the initiating service starts a new conversation, the number of the conversation endpoints on the target server keeps increasing.

Additionally, you receive the following error message on the initiator server:

An error occurred while receiving data: '64(The specified network name is no longer available.)'
This message could not be delivered because the conversation endpoint has already been closed.



It has several workarounds. I've not been affected by this yet, but KB says it has a hotfix that has been out since July 2007, so it is curious that it has not been put into a Cumulative Update yet, at least as far as documentation in Knowledge Base is concerned. Does anyone know any more about this?

Paul

View 1 Replies


ADVERTISEMENT

Cumulative Update Package 2 For SP2

Jun 30, 2007

I tried to install "Cumulative update package 2 for SQL Server 2005 Service Pack 2"
Everything went well except for the "SQL Server Database Services" update.
It errored out as it was trying to "Finalize" the update.

Kicker to this whole thing is the database file "temp_MS_AgentSigningCertificate_database.mdf" does not even exist.

I could not see any references to it in the master database.
I checked the registry and I can find a couple of search references for it.
It apparently may have been a database that existed in the server at one time.

I am not sure if I should remove the registry references to the database.



Below is a part of the install summary where it has failed:
===========================================================
Product Installation Status
Product : SQL Server Database Services 2005 (MSSQLSERVER)
Product Version (Previous): 3050
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB936305_sqlrun_sql.msp.log
Error Number : 29537
Error Description : MSP Error: 29537 SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]A file activation error occurred. The physical file name 'F:Data emp_MS_AgentSigningCertificate_database.mdf' may be incorrect. Diagnose and correct additional errors, and retry the operation.. To continue, correct the problem, and then run SQL Server Setup again.

If someone can tell me what I need to do to resolve this issue, I would greatly
appreciate it.

Thanks,
Larry :-(

Larry :-)

View 4 Replies View Related

Which Cumulative Update Package For Sp2

Jun 20, 2007

Hi

I have found two cumulative update packages available for sql 2005 sp2 - build 3161 (http://support.microsoft.com/kb/935356) and build 3175 (http://support.microsoft.com/kb/936305).



The fixes are supposed to be cumulative and include all fixes since the last service pack, but the list of hotfixes in each package is different.



Does build 3175 contain the fixes in build 3161? What about fixes mentioned in build 3175 that have version lowere than 3161 - are they included in build 3161?



Anthony

View 1 Replies View Related

Update Table - Running Cumulative Sum

Dec 18, 2013

How can I update a table to have a running cumulative sum?

For Example:

Update Table1 Set Cumulative_Sum = Row_Sum + Previous_Row_Sum

It should look something like this:

Row_Sum Cumulative_Sum
1 1
2 3
3 6
4 10

View 6 Replies View Related

SQL 2012 :: Last Cumulative Update Applied To SSMS

Mar 4, 2014

What's the most straight forward to determine what the last cumulative update was that was applied to SSMS?

I know that CU8 is out for SQL Server 2012, I just need to confirm which (if any) update was last applied to SSMS I'm currently looking at.

View 4 Replies View Related

Cumulative Update 5 Build 9.00.3215 KB - Problem

Dec 28, 2007





Cumulative Update 5 Build 9.00.3215 KB - Problem
http://support.microsoft.com/kb/943656/

We contacted Microsoft and installed the update, but when I do a SELECT @@Version I still get build 3042.

I'm not sure if they sent us the wrong file or if the update didn't apply correctly. Under Add/Remove Programs SQL Native Client shows the new build 3215 though.

Microsoft sent us
335091_intl_i386_zip.exe
This extracted to..
hotfix.txt
sqlncli.msi

Any ideas?

Thanks in advance!

View 3 Replies View Related

Setup And Upgrade :: 2008 R2 / Applying Latest Service Pack And Cumulative Update?

Jun 1, 2015

I have a question about Service Packs and Cumulative Updates for SQL 2008 R2.

Do you need to apply them in the order that they are released? Or can you just apply the latest Service Pack and Cumulative Update?

View 3 Replies View Related

Update Statement To Include Multiple Parameterised Input

Oct 18, 2006

I want to do an update query like the following:UPDATE tblUserDetails SET DeploymentNameID = 102 WHERE (EmployeeNumber = @selectedusersparam)Is there some simple way to add the @selectedusersparam as value1,value2,value3 etc. or do I have to input it with this type of syntax:UPDATE dbo_tblUserDetails SET dbo_tblUserDetails.DeploymentNameID = 102WHERE (((dbo_tblUserDetails.EmployeeNumber)=value1 Or (dbo_tblUserDetails.EmployeeNumber)=value2));Help appreciated.Many thanks.

View 5 Replies View Related

Transact SQL :: Update Statement To Include Multiple Records At Once

Apr 20, 2015

I have this update statement that works for one record. How do I write it to include multiple records at once. Please see sample below.

update
mklopt
set
 FRMDAT =
'12/31/2014'
where
 JOBCOD =
'PH14789' 

I also want to include the following instead of running it one at a time

PH17523    
PH17524    
PH17525    
PH17553    
PH17555    
PH17556    
PH17557    
PH17558    
PH17571    
PH17573    
PH17574    
PH17575    
PH17576    
PH17577    
PH1757

View 9 Replies View Related

Microsoft UPDATE BUG When Only One Row?

Mar 30, 2001

The update statement is failing with Timeout expired when there is only one row to update, otherwise if there are multiple rows to update it does not update the first row but updates the rest!!!??

Update cm_event_notification Set processed = '3/29/01 10:41:01 AM' Where dn = '{2E738808-23B4-11D5-B49A-00508BD934F8}'

View 1 Replies View Related

UPDATE/DELETE Bug In SqlDataSource - Will Microsoft Ever Fix This?

Aug 3, 2006

I'm referring to this bug, which I've seen a lot of people (including me) run into:
http://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=93937
Has anyone heard if MS plans to fix this soon?
Thanks

View 3 Replies View Related

Sql 2005 And Integration With Microsoft Update

Oct 16, 2006

I read that all versions of sql 2005 integrate with Microsoft Update. Is that true? (I don't recall ever seeing any sql 2005 updates -- but maybe I was using Windows Update not Microsoft Update?)

TIA,



Barkingdog

P.S. I know of two updates to sql 2005: SP1 and BOL but no others.






View 1 Replies View Related

Unable To Install SQL Server 2K5 Express From Microsoft Update

May 8, 2007

Windows Update gave a 0X65B error when installing SQL Server 2K5 Express SP2. The solution said to copy the summary.txt data below to this forum:



Time: 05/08/2007 11:06:22.102
KB Number: KB921896
Machine: WA10015USG93127
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No

**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed

**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU SP1 2005.090.2047.00 x86 EXPRESS
Express Database Services (SQLExpress) ENU SP2 x86 EXPRESS

**********************************************************************************
Products Disqualified & Reason
Product Reason

**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID

**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9Express_Hotfix_KB921896_SQLEXPR.EXE
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_SharedTools
Error Number : 1627
Error Description : Unable to install Windows Installer MSI file
----------------------------------------------------------------------------------
Product : Express Database Services (SQLExpress)
Product Version (Previous):
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9Express_Hotfix_KB921896_SQLEXPR.EXE
SQL Express Features : Client_Components,Connectivity,SDK
Error Number : 0
Error Description :
----------------------------------------------------------------------------------

**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 1627



Any help would be appreciated in getting this service pack installed.



Thanks,

Marty

View 5 Replies View Related

SQL 2005 Does Not Work With ADO Query On SYS.sysprocesses After Update Installed From Microsoft

Jul 11, 2007



str = "select nt_username, hostname, nt_domain, loginame, login_time, program_name " &
"from master.sys.sysprocesses where spid=@@SPID"



-This is the Query to display the username in the application.

-The client is MS-Access 2003, MDAC 2.8

-It was and is Ok both on SQL 2005 and SQL 2000. The qury runs under Query Analyzer 2000 or Management Studio 2005 without problem



-After Downloading the updates from Microsot Website. The embedded code returns no result set:

Data provider or other service returned an E_FAIL status



If anybody has any idea, I will be thankful.

View 8 Replies View Related

BUG In Microsoft Learning Resources VB Express Lesson 9 (Database Fails To Update).

May 30, 2006

I recently downloaded Visual Studio 2005 Express along with the Learning Resources for Visual Basic Express video. First let me say that the Learning Resources is an excellent resource for beginners to become familiar with Visual Studio, Database and programming concepts. Although the series is probably too basic for experienced developers you may find it reveals a number of tricks in the Visual Studio 2005 interface.
http://msdn.microsoft.com/vstudio/express/vb/default.aspx
 
Problem
I downloaded the VB Lesson 9 Visual Basic Project from Microsoft Learning Resources. With out making any changes to the project I compiled and ran it, making changes to the data and saving the changes. Every thing look great until you run it a second time and see that the changes to the data are all lost.
 
Observations:
1. Changes made to the data from within Visual Studio (Show Table Data) do take effect.
 
2. The in-memory data (DataSet) is changed as you move from row to row.
 
3. The TableAdapter.Update call returns 1, ostensibly indicating the number of rows updated.
 
4. The data in the database is not changed by the TableAdapter.Update call.
 
Operating System: Windows XP Pro Service Pack 2
Other Software installed on this system
20SQL Server 2005 Express
Visual Web Developer 2005 Express
Visual Studio 6.0 Enterprise
Visual Studio .net Enterprise
Microsoft .NET Framework SDK
Microsoft Office 2003
 
 
If anyone can help me understand the cause of this problem I would greatly appreciate it.
 
Thanks
Bob

View 1 Replies View Related

SQL Server 2005 SP1 Installs Successfully But Microsoft Update Still Showing It As Needed?

Jun 3, 2006

I have successfully installed SQL Server 2005 SP1 but when I go to the "Microsoft Update" site it is still shown as required. I have tried going back to an old image of the PC and installing SQL Server 2005 and SP1 again but still the "Microsoft Update" page is not picking up the fact that SP1 has installed successfully. Anyone had the same problem or know of a fix?

Steve



View 3 Replies View Related

SQL Server 2005 Express Edition SP2 Upgrade Via Microsoft Update Fails

Mar 9, 2007

 

If I search for updates with Microsoft or Windows Update it notifies me to upgrade SQL Server Express to SP2. After the download the installation fails. The reason seems to be that Microsoft Update downloads SP2 with the wrong language:

Summary.txt

**********************************************************************************
Products Detected                         Language  Level  Patch Level       Platform  Edition
Datenbankdienste für Express (SQLEXPRESS)  DEU       SP1    2005.090.2047.00  x86       EXPRESS
Datenbankdienste für Express (SQLExpress)  ENU       SP2                     x86       EXPRESS

**********************************************************************************
Products Disqualified & Reason
Product                                   Reason
Datenbankdienste für Express (SQLExpress)  Für dieses Update ist die Sprache DEU erforderlich (required/me). Bei der Produktinstanz SQLExpress wird die Sprache ENU verwendet. Downloaden (download/me) Sie das Update für ENU.

**********************************************************************************
Summary
     One or more products failed to install, see above for details
     Exit Code Returned: 1627

Thank you.

 

View 7 Replies View Related

FAILING UPDATE : Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896)

Feb 11, 2008

When updating automaticallly, this update always fail, I have put the configuration manager /server browser : the only one that was disabled, on manual (I have not the automatic option for this one) but nothing works, what can I do ? This is a new laptop I have got (XP pro) and I am going through the process of updating many things, only this one fails, any help appreciated.

View 5 Replies View Related

Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896) Auto Update Fail

Mar 27, 2008

I've been trying to install the following update: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896). I always recieve the following error: 2B22,

Please advise on a fix for this.

Regards,

View 5 Replies View Related

Microsoft.AnalysisServices.Viewers.DLL Microsoft SQL Server 2005 Datamining Viewer Controls

Jun 21, 2007





Hi

I am trying to use Association Viewer Control in

Microsoft.AnalysisServices.Viewers.DLL dll in VS 2005 but sometimes it gives an error.

"Code generatio for property 'ConnecitonManager'" failed. Error was:'Property accesor 'ConnectionManager' on object 'AssosiactionViewer1' threw the following exception:'Object referance not set to instance of an object"


Is there anyone here who use
"Microsoft SQL Server 2005 Datamining Viewer Controls" in SQLServer2005 FeaturePack ?
http://www.microsoft.com/downloads/details.aspx?FamilyID=50b97994-8453-4998-8226-fa42ec403d17&DisplayLang=en

i am using VS2005 Version 8.0.50727.762 (SP.050727-7600)
and SQL Server 2005 SP2

thanks from now.

Cem Üney







View 9 Replies View Related

Microsoft Access Doesn't Support Design Changes To The Version Of Microsoft SQL Server

Jul 23, 2005

Dear All,Access adp on sql-server 2000After upgrating to A2003 updating data with 1 perticular combobox causes theprogram to hangs without any error-msg.Traying to change te combobox recordsource i get this error:This version of Microsoft Access doesn't support design changes to theversion of Microsoft SQL Server your project is connected to. See theMicrosoft Office Update Web site for the latest information and downloads(on the Help menu, click Office on the Web). Your design changes will not besaved.The solution in :http://support.microsoft.com/defaul...kb;en-us;313298tolks about SP 'dt_verstamp007' but I have SP 'dt_verstamp006'What should I do.Is the failure of the combobox also caused by the absence of dt_verstamp007???Filip

View 2 Replies View Related

[Microsoft][ODBC Microsoft Access Driver] System Resource Exceeded

May 22, 2007

odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect





we got the error with access 2000 database and PHP as prog. language .



we created dsn for the connection.



reboot solves the problem. but we need another solution better than this.

View 7 Replies View Related

Cumulative Log

Sep 7, 2007

Is it possible to create a cumulative log using SSIS? basiclly I have 5 logs which hold failed records. I would like to create a cumulative log and send it via email using SSIS.
thoughts?

thanks

View 6 Replies View Related

Installing Microsoft Dynamics 10.0 With Microsoft SQL Server 2008 Katmai

Sep 25, 2007



Hi,

I'm trying to install Microsoft Dynamics 10.0 with SQL 2008 Dev but when launching the utilities this returns the following error message:

******************************************************************
Your current SQL Server is not a supported version.

Req: Microsoft SQL Server 8.0
Act: Microsoft SQL Server code name "Katmai" (CTP) - 10

You need to upgrade to SQL Server 8.0 before continuing.

******************************************************************

Any ideas could help or has this if anyone knows been desinged not to work with GP10 currently?

Assad

View 7 Replies View Related

Cumulative Sum(Urgent)

Apr 26, 2000

I'm trying to get the final result using an aggregate function.

Table looks like below;
ID ACRE Probability
1 3 0.3
2 1 0.6
3 6 0.2
4 5 0.5
5 2 0.1

First, I want to descend by probability then select all records that cumulative acre <= 8

So, final result will be:

ID ACRE Probability
2 1 0.6
4 5 0.5

Any idea how to write a script?

Thanks in advance,

Mike Jun
hyunhyo@hotmail.com
GIS reserch Group
University of Colorado
303-492-8781

View 1 Replies View Related

Cumulative Count

Oct 4, 2005

I have to group the no. of employees based on month. i.e

Jan 10 employees
Feb 20 employees
Mar 30 employess

The result is to be

Jan 10
Feb 20
Mar 60.

Kindly provide the sql for getting the above result.

Thanks,
Lakshmi

View 6 Replies View Related

Cumulative Weeks

Jul 20, 2005

SQL Server 2000 SP3Hi,How can I get the cumulative weeks from a givedate to the currentdate. I know I can get the weeknumber by using datepart(wk,getdate())but this will giveme the week number for this year. What if I want to know the number ofweeksthat have passed since june 1 2001. If I use datepart(wk,'20010106') Iwillget the week number for 2001 but I would like the number of weeksexpired between then now.Thanks,Reg

View 1 Replies View Related

Hierarchical Cumulative Sum

Aug 23, 2006

I have a table consisting of 3 columns: Parent varchar(50), Child varchar(50), Pop int.

The table is setup as follows:

Parent Child Pop
----------------------------------
Europe France 0
France Paris 1
New York New York City 10
North America United States 0
North America Canada 0
United States New York 0
United States Washington 0
Washington Redmond 200
Washington Seattle 100
World Europe 0
World North America 0

This is just some sample data modified a tiny bit from an example of a hierachical print out sample that is a stored procedure that allows me to pass any place and see all of that place's children/grandchildren.

I need to figure out how to write a query to show me cumulative sums (ROLLUP?) of the whole tree. So the output should basically be something like this (it can include parent and child columns too):

World Null 311
World Europe 1
Europe France 1
France Paris 1
World North America 310
North America United States 310
North America Canada 0
United States New York 10
United States Washington 300
New York New York City 10
Washington Redmond 200
Washington Seattle 100

Hopefully you understand what i'm looking for. I've tried using WITH ROLLUP and I also tried using an Inner Join but I'm not really sure what I need to do to pull this off. I seem to only be able to get it to work 1-2 levels deep but not through the whole tree.

Any help/ideas would be appreciated! Thank you.

View 13 Replies View Related

Finding Cumulative Sum

Dec 29, 2007

In the emp table :
>
> EMPNO ENAME SAL
> ==================
> 7369 SMITH 1000
> 7499 ALLEN 2000
> 7521 WARD 3000
> 7566 JONES 4000
> 7654 MARTIN 5000
>
> there is a requirement to have a calculated col.
> called cummulative sal
>
> EMPNO ENAME SAL CUMMULATIVE_SAL
> 7369 SMITH 1000 1000
> 7499 ALLEN 2000 3000
> 7521 WARD 3000 6000
> 7566 JONES 4000 10000
> 7654 MARTIN 5000 15000
>
>

How to show this calculated col. by using one select statement?
I could get the result using Empno. in my query as --
select ename,sal,(select sum(sal) from emp k where k.empno <= e.empno) as cum from emp e order by ename

but I was asked to get the same result if empno. col is not there?

SUCKS........... the below code is giving the result but I don't know how you could use operator (<) on two strings to compare......????
select ename,sal,(select sum(sal) from emp k where k.ename <= e.ename) as cum from emp e order by ename

Someone tell me if this is the right approach or is there a better way of getting the thing done.

View 4 Replies View Related

Microsoft SQL Server Express And Microsoft Visual Studio...

Mar 17, 2008

I have a query that executes just fine except that it won't recognize varchar(255) ( or any other value within the () ) and if I leave it off like this: varchar, then it executes but it leaves that value as 1 and that is just not very useful for my purposes. This also happens with anything else that requires () to add length such as char(), or nvarchar(), etc... Any ideas?

View 1 Replies View Related

Saving Cumulative Data Or Something Like That :)

May 4, 2007

Hi,There are 3 tablesTable,TableDetails,TableDaily.With structureTABLE:TableID        UserID        Money----------        ----------        ----------(int)            (int)            (money)TABLEDETAILS:TableDetailsID    TableID        ItemID        PaidForItem    DayID----------               ----------        ----------        ----------           ----------(int)                   (int)             (int)            (money)         (int)TABLEDAILY:TableDailyID    TableID        PaidForItem    Money        Total                                 Change----------            ----------        ----------            ----------        ----------                              ----------(int)                (int)             (money)          (money)      (PaidForItem + Money)       (money)"Table"    holds id for user and his money amount, which changes during time. "TableDetails" holds data about items user bought, amount paid for them and dayid which relates to one particular day."TableDaily" holds history. I do not know how to update this table.I created job whish runs stored procedure. This procedure sums "PaidForItem" using group by TableID and WHERE DAYID = '11'.Problem is with Change column. This column sould hold difference between today's Total and previous one etc.Current procedure looks like this:INSERT INTO    TableDaily        (TableID, PaidForItem, Money, DayID)SELECT        TableDetails.TableID,                     SUM(PaidForItem) AS PaidForItem,                     Table.Money,                    (SELECT    DayID                    FROM    Days                    WHERE  (Aktive = 1)) AS DayIDFROM          TableDetails INNER JOIN                    Table ON TableDetails.TableID = Table.TableID GROUP BY    TableDetails.TableID, Table.Money

View 3 Replies View Related

Cumulative Counts With GROUP BY?

Jun 6, 2014

I have the following:

SELECT '201305' AS PAYPERIOD,
EMPLOYEE,
RIGHT ('000' + CAST (DEPT_ID AS VARCHAR(3)) ,3) AS DEPARTMENT,
COUNT (EMPCODE) AS BONUSCOUNT_YTD
FROM Table1
WHERE (YEAR = 2013 AND PERIOD < 2)
GROUP BY EMPCODE, YEAR, PERIOD, DEPT_ID

[Code] ...

How can I get the counts to be cumulative? In other words, if an employee appears in pay period 201305 that's 1, if they then appear in pay period 201306 that becomes 2.

View 4 Replies View Related

Cumulative Result Calculation

Jul 5, 2014

Is there any way to calculate Cumulative result.

Manpower|Count|Cum_Count|Formula
Apr|70|70|Sum(APR)
May|40|110|Sum(Apr+May)
Jun|110|220|Sum(Apr+May+Jun)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved