This question is very basic. When you do a ProcessAdd, is it within a transaciton mode?
I mean, if the ProcessAdd fault and stop when it meets a mistake, the records before the midstake will still be in the cube or not.
Thanks.
Can someone please help me with this problem....
I am having problems entering info into my database. I haven't had any problems so far. But all of a sudden when I try to add info to some of my columns I get the error message:
"Transaction cannot start while in firehose mode."
My column type is nvarchar. I thought I might have the length set to low, but I set the length as high as 400 and can't fit the same length of entries as some of my 200 length columns.
And also there are no constraints or foreign key values related to the column. I even created a new column with nvarchar at 400 length just to test it and same error. I'm stumped...
Thank you whomever knows this problem....
-alec
Hello everyone,
In SQL Server Enterprise Messenger I've been getting the following error in a pop up window:
"Transaction Cannot Start in Firehose Mode"
Besides this error that is featured in the Microsoft KB
BUG #: 228790 at
http://support.microsoft.com/default.aspx?scid=kb;en-us;286199
Is there any other reason why someone could open a table (that only has around 200 rows in it) and get this error message upon trying to update a row?
Hi Guys,
Refering to my previous post I've a package which easily run when transaction mode is Supported but when i put it to Required and All DFs are supported inside the sequence container it won't run.
Well technically it goes and pass step 1, so it goes to green but regardless of what i put in the 2nd DF it won't run. It just hangs in there.
When i check the component service and check DTC, the transaction would be running but never commited.
I have done most of the things about DTC and configuration with the MS articles as this package was failing before but now it just sits at this point.
Any ideas?
Thank you
Gemma
Hi all:
I know i can use the sentence SET IMPLICIT_TRANSACTIONS ON in a Stored Procedure to force SQL Server to set the connection into implicit transaction mode.
Have i a sentence or configuration to force all SQL Server connections to implicit transaction mode?
Thanks in advance.
I am relatively new to SQL Server so excuse my ignorance.
I have noticed in many of my SQL Server 2005 instances that the tempdb database is very often reporting the log mode as waiting active_transaction or waiting checkpoint.
Is this of concern, how can I determine the cause of these waits and how can they be reduced or eliminated ?
hi,
we have a SQL Server 2000 database which we set to 'SIMPLE' recovery mode at 6pm (due to nightly large data loads). We revert back to 'FULL' recovery mode at 6am.
My understanding was that in 'SIMPLE' recovery mode, the transaction log would not grow because it would automatically be truncated after a checkpoint. However this is not the case. I thought perhaps it could be due to a long running uncomitted transaction, but when I ran 'dbcc opentran', the oldest running transactions doesn't last for more than a couple minutes. I manually run a 'checkpoint' command as well in the hope of forcing the transaction log truncation. I repeat this a couple of times to no avail. When I run 'dbcc sqlperf(logspace)' , I can still see the transaction log growing.
It is not until I run 'backup log db with truncate_only' that the transaction log gets truncated.
I do not understand, why the transaction log does not get automatically truncated in SIMPLE recovery mode?
Andrew
We are currently testing a Replication topology as follows:
SQL Server 2005 Developer as publisher and distributor of a push updatable transaction replication
2 SQL Server 2005 Express clients as subscribers.
The replication is working great. If the connection is lost, the subscribers switch from Immediate to Queued Updating, and seem to shift back to Immediate when they regain the connection.
My question is to determine if there is a way that I can ask SQL Express on the client which mode is it currently running, or ask SQL Express if it has a current live connection to the distributor.
I know that they are usually mutliple ways to accomplish tasks, and I would be open any suggestions, preferrable programming in VB (such as with SMO or RMO) or using stored procedures or functions.
I hope this give some people something to chew on during the weekend and thank you to all that have taking the time to read this.
Hi there - can anyone advise on the following issue. We have recently performed some server side tracing on a particular SQL instance over 24hr period. We are now attempting to load these into a database for analysis. Here lies the problem.
When we are loading the profiler trace files (one at a time) into the database the transaction log is growing at an excessive rate. Even though the database is in SIMPLE mode.
We are loading the traces using the command:
INSERT INTO sqlTableToLoad
SELECT * FROM ::fn_trace_gettable('MytraceFileName', DEFAULT)
Can anyone advise how we could possibly get round this issue as we're running out of space due to the transaction log.
Thanks
Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
View 1 Replies View RelatedWe have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
Hello,everyone!!
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000
rows) But when I execute in the text mode, it takes about 0.40 seconds!!
Why is this difference?
Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!)
Why is it so slow on the text mode & relatively faster in the grid mode?
Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Rgds,
Adie
how to put sql server database in suspect mode intensely and  get it out from suspect mode to normal mode.
  i am using SQL server 2008 R2
Recently I read such statments 'When SQL Server is run in "lightweight pooling" mode (fiber mode) and the DTC service is started, unexpected behavior may occur.'
Can someone say anything about fibe mode?I am appreciated for it.:)
Hi,
Currently, our Report Builder is running on Local Intranet mode. I'm investigating what the security implications are in changing it to Internet mode. However, I've not been able to find any documentation on this.
Does anyone know of any documentation that addresses this issue or have experience that they can share with changing Report Builder security zone from Intranet mode to Internet mode?
Thanks very much.
Hi folks,
I have a SQL 2005 OTC. CTP version running on Windows 2003 server.
I would like to find out how the SQL server option changed to Windows Authentication mode from Mixed mode over the weekend. From the SQL log, I don't see when it changed. I would like to see Date/Time and client IP. If I can see User ID (windows) that would be great. Where I can find these info in SQL server?
Thank you in advance...
SHJ
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View Related
I want to list out the pending transaction for transaction replication by publication.
Help needed.
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies View Related
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
I'm getting this error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
any suggestions?
I am executing a stored procedure something like this
Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....
....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
Thanks
micky
Hi all,
In my ASP application, I've been using this code:
----------------------------------------------
dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection")
conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
Thanks so much,
Annie
I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
View 2 Replies View Related