While learning ASP.net 2.0, I was taught that the the default provider for the SqlDataSource was System.Data.SqlClient, and that I only needed to specify it as a provider when I put it in the web.config file. However, now (in VWDE 2008) when I add a SqlDataSource to a page, it adds ProviderName="System.Data.SqlClient". Does this mean that it isnt the default anymore?
View 1 RepliesI have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.SqlClient.SqlConnection.PermissionDemand()
at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was:
Demand
The type of the first permission that failed was:
System.Data.SqlClient.SqlClientPermission
The Zone of the assembly that failed was:
Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
to configure what am I missing?
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
I created a .net console application within which I connect to a sql server (not local) as follows,
string conn_str = "Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=QuantEquitySql;Data Source=server name";
SqlConnection conn = new SqlConnection(conn_str);
conn.Open();
.
Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
Does anybody know a fix to this problem?
Thanks
I have a report that uses some embedded custom code. The embedded custom code is a function that execute some sql query on a sql server database.Everything works fine in Visual studio. The report gets deployed on the server successfully, however when running the report from report manager i get the following error message :
The Hidden expression for the table €˜table1€™ contains an error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
Here is the code :
************************************************************************
Public function get_field() as string
Dim myConnection As System.Data.SqlClient.SqlConnection
Dim myCommand As System.Data.SqlClient.SqlCommand
Dim data_reader As System.Data.SqlClient.SqlDataReader
Dim field(100) as string
Dim i as integer
Dim j as integer
Dim sql_field as string
Dim nbr_field as integer
Dim rtn_string as string
i = 0
sql_field ="Select field from mytable"
myConnection = New System.Data.SqlClient.SqlConnection("Datasource=xxx.xxx.xxx.xxmydatabase;Initial Catalog=mydatabase;User Id=user1;Password=password1;")
myConnection.Open()
myCommand = New System.Data.SqlClient.SqlCommand(sql_field, myConnection)
data_reader = myCommand.ExecuteReader()
While data_reader.Read()
if data_reader.HasRows then
field(i)= data_reader(0).ToString()
end if
nbr_field = nbr_field + 1
i= i+1
End While
data_reader.Close()
myConnection.Close()
for j = 0 to nbr_field -1
rtn_string = rtn_string + field(j) + ","
Next j
rtn_string = left(rtn_string,rtn_string.length-1)
return rtn_string
'return sql_cmd
'return yes_no
'return lkupfield
end function
******************************************************************
Why do i get the error message ?, is this related to Code Access Security issues with .net framework. if yes
how do i set the Security so the report server or report manager allows embedded custom code to be executed. Any advice ?
Chi
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies View RelatedWell, I hope, after my endless search in the web... maybe, somebody can help me here.I'm passing a application to a web-based application, therefore I have to use ADO.net to access a sql server DB. But the performance is extremly poor!!!!Just to compare: with the normal application or with the SQL Query Analyzer, the query needs about 2 seconds. Well, by using ado.net, it's about 200 seconds......!!!!Of course, the query is quite long. But the difference is extrem... too extrem for using the same query....I already tried a lot... actually everything I found on the web. What is really strange is that neither the processor nor the memory is fully used... And the web server use more of the cpu power than the sql server itself (the 2 server are still on my machine where I'm programming). So, could it be that the problem is by filling up the dataset with the sqladapter or something similar?Thx for your help!!
View 8 Replies View RelatedIn Windows Server 2003 SP1 (x86) with Sql Server 2000 I could use the following connectionstring no problem
DSN=Hello;
Now I am using Windows Server 2003 x64 and SQL 2005 and I get this error:
Provider is not specified and there is no designated default provider.
If i try Provider=MSDASQL;DSN=Hello; i get
Provider cannot be found. It may not be properly installed.
for DSNless this works fine:
Provider=sqloledb;driver={sql server};server=(local);database=Hello;uid=sa;pwd=p wd;
but i am forced to use DSN as it is in a closed source application which uses set DSNs (the idea there being that you can change the connections how you like in ODBC)
This means that i need the ODBC provider name that will work in here: Provider=...;DSN=Hello;
and then to use whatever works in there as the "default provider" but i cannot find any information anywhere on how to do this!
please reply ASAP!
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
i have installed visual express and sql express.
but the problem is i want to add the connection string manuallty in visual studio express 2005.
so i want to add a reference of sql.data.sqlclient but could not add ?
i am not sure what is the problem or is am i missing anything
I am not able to add the namespace "system.data.SqlClient" and not able to get the intellisense for sqlconnections. I have only vs2005. i do not have sql management express
or sql server 2005
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NWHCConnectionString %>" SelectCommand="SELECT * FROM [AI_news]" OnSelecting="SqlDataSource1_Selecting"> </asp:SqlDataSource> This is my code, I have followed the wizard perfectly the way its supposed ot be, well not 100% perfectly. This is how its supposed to be. When using a XXXX.MDF file I could use the wizard and it works fine. I do not know why my above code won't work. I am connected to the database and can view code manually. but not on a aspx page. i am using master page, now trying to add this into default.aspx Any help will be appreciated. I am currently losing some hair.
View 4 Replies View RelatedHi All,
I am new to ASP.NET and trying to learn. I am getting the problem when I try to insert data into SQL. The exception that I am getting is
Exception Details: System.Data.SqlClient.SqlException: An explicit value for the
identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
My table name is 'Customers' and its as below.
-----------------------------------------------------------------------
CustomerID--numeric---Identity Seed is 1000---Identity Increment is 1---No Nulls.
Name--------varchar---No Nulls.
address------Varchar---No Nulls.
State--------Varchar---No Nulls.
Zip-----------VarcHar---No Nulls.
PhoneNumber-Varchar---No Nulls.
Email---------Varchar---No Nulls.
and my code is (No fun of my code please--I am a learner)
-----------------------------------------------------------------------
Imports System.Data
Imports System.Data.SqlClient
Public Class register
Inherits System.Web.UI.Page
Protected WithEvents cnNWind As SqlConnection
'Protected drCustomers As SqlDataReader
Protected WithEvents lbladd As System.Web.UI.WebControls.Label
Protected WithEvents lblState As System.Web.UI.WebControls.Label
Protected WithEvents lblcity As System.Web.UI.WebControls.Label
Protected WithEvents lblzip As System.Web.UI.WebControls.Label
Protected WithEvents lblPhone As System.Web.UI.WebControls.Label
Protected WithEvents lblEmail As System.Web.UI.WebControls.Label
Protected WithEvents TxtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAdd As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents txtPhone As System.Web.UI.WebControls.TextBox
Protected WithEvents TxtEmail As System.Web.UI.WebControls.TextBox
Protected WithEvents BtnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents Label1 As System.Web.UI.WebControls.Label
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
End Sub
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub
Private Sub BtnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click
cnNWind = New SqlConnection()
cnNWind.ConnectionString = "Data Source=(local); Initial Catalog=cart; Integrated Security=SSPI"
cnNWind.Open()
If cnNWind.State = ConnectionState.Open Then
Dim cmCustomers As New SqlCommand("INSERT INTO Customers VALUES ('',' " & TxtName.Text & "','" & txtAdd.Text & "','" & txtState.Text & "','" & txtZip.Text & "','" & txtPhone.Text & "','" & TxtEmail.Text & "')", cnNWind)
cmCustomers.ExecuteNonQuery()
cmCustomers.ExecuteNonQuery()
cnNWind.Close()
End If
End Sub
End Class
The Error I am getting:
-----------------------------------------------------------------------
Server Error in '/SCart' Application.
--------------------------------------------------------------------------------
An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
Source Error:
Line 46: If cnNWind.State = ConnectionState.Open Then
Line 47: Dim cmCustomers As New SqlCommand("INSERT INTO Customers VALUES ('','" & TxtName.Text & "','" & txtAdd.Text & "','" & txtState.Text & "','" & txtZip.Text & "','" & txtPhone.Text & "','" & TxtEmail.Text & "')", cnNWind)
Line 48: cmCustomers.ExecuteNonQuery()
Line 49: cnNWind.Close()
Line 50: End If
Source File: d:inetpubwwwrootSCart
egister.aspx.vb Line: 48
Stack Trace:
[SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.]
System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
SCart.register.BtnSubmit_Click(Object sender, EventArgs e) in d:inetpubwwwrootSCart
egister.aspx.vb:48
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
The code works fine If I Dont use Identity Column, But I need to use Identity Column in my Project :( ...Please Help.
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
I'm trying to retrieve an image from my ms sql server 2005, and i'm using VS2005....however, i have the following error during the compilation process Code in webform2.aspx.vb:Partial Class webform2 Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim connstr As String = "Data Source=DCPRJ007SQLEXPRESS;Initial Catalog=mydatabase;Integrated Security=True" Dim cnn As New Data.SqlClient.SqlConnection(connstr) Dim cmd As New Data.SqlClient.SqlCommand("select * from dbo.images where id=" & Request.QueryString("id"), cnn) cnn.Open() Dim dr As Data.SqlClient.SqlDataReader = cmd.ExecuteReader() Dim bindata() As Byte = dr.GetValue(1) Response.BinaryWrite(bindata) End SubEnd Class System.Data.SqlClient.SqlException was unhandled by user code Class=15 ErrorCode=-2146232060 LineNumber=1 Message="Incorrect syntax near '='." Number=102 Procedure="" Server="DCPRJ007SQLEXPRESS" Source=".Net SqlClient Data Provider" State=1 StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at webform2.Page_Load(Object sender, EventArgs e) in C:Documents and SettingsAdministratorMy DocumentsVisual Studio 2005WebSitesWebSite7webform2.aspx.vb:line 10 at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
View 4 Replies View Relatedim getting this error when i try to access the application from the network. but in my computer work fine
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
please help... thanxs
Hi,
I had make one Desktop application in VB.net, having 6 threads simultaneously running. And each thread connect to sql server and stored the value in DB at every one second. Now my problem is that when I start the application its working fine but after 20-30 minutes exception is occuring.
Login failed for user 'sa'.
Exception StackTrace:
at System.Data.SqlClient.ConnectionPool.CreateConnection()
at System.Data.SqlClient.ConnectionPool.PoolCreateRequest(Object state)
can anybody help me
- Hiren
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedAaarrgghhhhhhh, still searchin' for a nice step-by-step article to learn data access (all insert delete update commands) with the SQL Server .NET Data Provider found in [System.Data.SqlClient] namespace....
Can anyone plz help me to find it?
trying to connect to sql server 2005 over the internet. (its a third paty hosting company i'm using)
so i have to connect via tcp/ip using sql server authentication.
my laptop is running vista.
the version of sql server 2005 on my laptopis developer edition with service pack 2.
it worked fine from windows xp and the connection details are valid as it runa fine from .net on the hosting website.
i have added sql serer managemnt studio to the exceptions list in the firewall.
ihave made sure tcpip is enabled in the sql server connection management console.
i have also enabled it in the cliconfg tool
firewall on/off seems to make no difference.
its almost enough to make you turn to oracle and thats saying something considering how long i've been in the microsoft camp...
the error returned is:
Login failed for user 'SQL2005_152092_garethbowen'. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476
------------------------------
Server Name: 'xxxx',1433
Error Number: 18456
Severity: 14
State: 1
Line Number: 65536
Hi All,
I have a form (asp website with the default.aspx and default.aspx.cs) which I use to connect to the SQL Server 2005 database and insert, update,get and delete data to and from it. In the table I have a column called Picture to insert a photo (usually bmp files) which I declared as a varbinary(max). ID is the primary key and is an int (i tried it to be numeric & varchar).
I am trying to insert data into the table using a form with this syntax:
SqlConnection enter_conn = new SqlConnection("user id=;" +
"password=;server=servername;" +
"Trusted_Connection=yes;" +
"database=Member Profiles; " +
"connection timeout=30");
enter_conn.Open();
string insertSql = "Insert dbo.Details(ID,Last_Name,First_Name,Middle_Initial,Project, Organization,Manager,Current_Skills,Biography,Hobbies, Picture) Select 1001, 'ABC','XYZ','R',' Website Development','ACT',LKM','ASP.Net, C#.Net, SQL Server 2005, SharePoint, Java, ',' developing the new website for ACT using SharePoint and SQL Server 2005', ' Singing, Listening to Music, Dancing, Cooking, Swimming', BulkColumn from Openrowset( Bulk 'C:\photos\rose.bmp', Single_Blob) as Picture";
SqlCommand myCommand = new SqlCommand(insertSql, enter_conn);
int i = myCommand.ExecuteNonQuery();
I have no data in the table and am doing the first insert. Though the data gets inserted I am getting this exception:
System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_Details'. Cannot insert duplicate key in object 'dbo.Details'. The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at _Default.Enter_Click(Object sender, EventArgs e) in c:Documents and SettingskrkondaXMy DocumentsVisual Studio 2005WebSitesMember ProfilesDefault.aspx.cs:line 82
Can someone please suggest anything???? I appreciate a quick response please!!!!
Thanks,
Kavya
I am getting this error message
System.Data.SqlClient.SqlException: Invalid object name 'RacingHeritage'
I have noticed from other posts where the database owner is the login name
I rebuilt the table and the owner is now dbo
Here is the Code
Function GetCustomers() As System.Data.DataSet Dim connectionString As String = Application("HiddenConnection") Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [RacingHeritage].[RHID], [RacingHeritage].[UserID], [RacingHeritage].[Clie"& _ "ntFirstName] FROM [RacingHeritage]" Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection
Dim dataAdapter As System.Data.IDbDataAdapter = New System.Data.SqlClient.SqlDataAdapter dataAdapter.SelectCommand = dbCommand Dim dataSet As System.Data.DataSet = New System.Data.DataSet dataAdapter.Fill(dataSet)
Return dataSet End Function
Any Ideas
Hello,
we have asp.net apps on a windows 2003 server that connect to an instance of sql server 2005 enterprise edition on another windows 2003 server. We get this error at random times. Anyone know what could be causing it?
System.Web.HttpUnhandledException: Exception of type System.Web.HttpUnhandledException was thrown. ---> System.Data.SqlClient.SqlException: SSL Security error. at System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) at System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) at System.Data.SqlClient.SqlConnection.Open()Thanks
I keep getting this error whenever I try to run my query: System.Data.SqlClient.SqlException: Incorrect syntax near '>'.
I'm just trying to fill a dataset with three tables that contain the past few days headlines...what am I doing wrong?? Private Sub fishHeadlines()
Dim dateNow As DateTime = DateTime.Now()Dim dateThen As DateTime = DateTime.Today.AddDays(-2)
'create the table array so we can create the sql statement in a moment
Dim table() As Stringtable = New String() {"Snapper", "Scissor", "MahiMahi"}
Dim strSelect As String
'Create a dataset to hold the tables containing the headlinesDim headlinesDS As New DataSet()
'create the connection string - SnapshotConnectionString is in web.config file
Dim strConnect As StringstrConnect = ConfigurationManager.ConnectionStrings("fishConnectionString").ConnectionString
'create a connection object to the databaseDim objConnect As New SqlConnection(strConnect)
objConnect.Open()
Dim i As Integer
'fill the datatablesFor i = 0 To table.Length
strSelect = "SELECT Event FROM " & table(i) & "WHERE (DateOfEntry > '" & dateThen & "')"
'create a data adapter object using connection and sql statementsDim objDA1 As New SqlDataAdapter(strSelect, objConnect)
'fill the dataset
objDA1.Fill(headlinesDS, table(i))
Next
Dim strTable As StringDim dr As DataRow
strTable = "<table>"For i = 0 To table.Length
For Each dr In headlinesDS.Tables(table(i)).Rows
strTable += "<tr><td>" & dr(0).ToString() & "</td></tr>"
Next
Next
strTable += "</table>"
'display the data
lblHeadlines.Text = strTable
End Sub
Hello,
I see the following in connection strings all the time: providerName="System.Data.SqlClient"/>
For example:<connectionStrings><add name="classifiedsConnection" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|classifiedsdb.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/></connectionStrings>
What is providerName="System.Data.SqlClient" ? What is it used for?Thanks, Jim
Hi there, i copied some insert code from one page to another and it keeps throwing me this error, i was wondering if anyone can help me out. Here is the error
System.Data.SqlClient.SqlException: The name "Credit" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Admin_expenses.Button1_Click(Object sender, EventArgs e) in d:hostingmemberashdfhtdocswwwAdminexpenses.aspx.cs:line 40
This is my code, i cant see anything obvious and as i said i just copied it across, the only things changed were the names and the sqlstringprotected void Button1_Click(object sender, EventArgs e)
{decimal intamount = Convert.ToDecimal(txtAmount.Text);
string sConnectionStringExpense = "Data Source=xxxx;Initial Catalog=xxxx;User ID=xxxx;Password=xxxx";SqlConnection objConnExpense = new SqlConnection(sConnectionStringExpense);
using (objConnExpense)
{
objConnExpense.Open();string sqlExpense = "INSERT INTO tbl_expenses (expense_amount, expense_payment_type, expense_type, expense_description) " +
"VALUES (" + intamount + "," + ddlPaymentType.SelectedItem + "," + ddlExpenseType.SelectedValue + "," + txtDescription.Text + ")";SqlCommand objCmdExpense = new SqlCommand(sqlExpense, objConnExpense);
try
{
objCmdExpense.ExecuteNonQuery();
}catch (Exception ex)
{lblcomplete.Text = "!!Adjust stock for product at location " + Convert.ToString(ex);
}
finally
{
objConnExpense.Close();
}
}
Yesterday, in response to an error msg (something like Login failed for user ''), I deleted the 'providerName=System.Data.SqlClient'in my connectionStrings from Web.config. Then the aspx website worked.I understand that the value "System.Data.SqlClient" specifies that ASP.NET should
use the ADO.NET provider System.Data.SqlClient
when making a connection. Why deleting providerName solved the error? Jeffrey
Hi everybody,
We are developing Asp.Net Application in following environment.
Windows 2003
Dot Net 2003
SQL Server 2000
Problem :
We have team of four people. We made one machine as database server and rest of the people trying to connect to that database server. we are getting error "SQL server not found.".
We are using following string as a connection string.
"DATA SOURCE=192.292.7.105;DATABASE=xxx;User ID=xxx;password=xxxx"
We have tried same connection string with the VB.Net program. It is working fine.
But when we are trying same string in the web application. It is giving me the above mentioned error.
Can any one help me ?
Thanks is advance.
From
Jigar Shah
I am getting the exception -System.Data.SqlClient.SqlException: Timeout expired.The timeout period elapsed prior to completion of the operation or the server is not respondingWhen I am executing the stored procedureHow to resolve this?
View 1 Replies View RelatedI am getting the error below
View 2 Replies View Related