Is Wrong Version Of SQL Server Active On Server
Dec 22, 2006
A couple of days ago I installed SQL Server Developer Edition onto my server "DELLNOV2006" which already had an instance of SQL Server 2000 Developer Edition.
All seemed fine, but today trying to use SQL SMAS, I received the error "This version of SQL server is not supported. You must upgrade to an instance of SQL server 2005.
So I opened MSFT SQL Server Management Studio and in object explorer saw the highest object was "DELLNOV2006 (SQL Server 8.00.2039 DELLNOV2006MST).
In the query window SELECT SERVERPROPERTY('productversion'), SERVERPROPERTY ('productlevel'), SERVERPROPERTY ('edition') is returning 8.00.2039
That's SQL Server 200 SP 4, so it looks like SL Server 2005 is either not installed or is somehow not the default.
According to 'Remove Software' window, I have both SQL Server 200 and 2005 installed.
How can I get SQL 2005 as the default? Then I can get rid of 2000.
Thanks
Mike Thomas
View 3 Replies
ADVERTISEMENT
Nov 18, 2002
We installed an Enterprise version onto a server that only needs Standard. Unfortunately an outside supplier installed software and databases on it before we realised our mistake. Is it safe to just install Standard 'over the top'and what would that do to the application's databases ?
View 1 Replies
View Related
Dec 3, 2006
I am running MS SQL 2000.I recently ran a procedure in Query Analyzer from the Master db toclear out all replication information so I could start/recreate itagain.After I ran this procedure Enterprise Manager no longer showed theregistered server in the tree. When I tried to re-register it gave methe following message:"A connection could not be established to ([Database Name])""Reason: [SQL-DMO]Sql Server ([Database Name]) must be upgraded toversion 7.0 or later to be administered by this version of SQL-DMO""Please verify that sql is running and check your SQL serverregistration properties (by right click on the ([Database Name]) node)and try again."I ran the following procedure:<code>exec sp_configure N'allow updates', 1goreconfigure with overridegoDECLARE @name varchar(129)DECLARE @username varchar(129)DECLARE @insname varchar(129)DECLARE @delname varchar(129)DECLARE @updname varchar(129)set @insname=''set @updname=''set @delname=''DECLARE list_triggers CURSOR FORselect distinct replace(artid,'-',''), sysusers.name fromsysmergearticles,sysobjects, sysusers wheresysmergearticles.objid=sysobjects.idand sysusers.uid=sysobjects.uidOPEN list_triggersFETCH NEXT FROM list_triggers INTO @name, @usernameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping trigger ins_' +@nameselect @insname='drop trigger ' +@username+'.ins_'+@nameexec (@insname)PRINT 'dropping trigger upd_' +@nameselect @updname='drop trigger ' +@username+'.upd_'+@nameexec (@delname)PRINT 'dropping trigger del_' +@nameselect @delname='drop trigger ' +@username+'.del_'+@nameexec (@updname)FETCH NEXT FROM list_triggers INTO @name, @usernameENDCLOSE list_triggersDEALLOCATE list_triggersgoif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syspublications]') and OBJECTPROPERTY(id,N'IsUserTable')= 1) begin DECLARE @name varchar(129)DECLARE list_pubs CURSOR FORSELECT name FROM syspublicationsOPEN list_pubsFETCH NEXT FROM list_pubs INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping publication ' +@nameEXEC sp_dropsubscription @publication=@name, @article='all',@subscriber='all'EXEC sp_droppublication @nameFETCH NEXT FROM list_pubs INTO @nameENDCLOSE list_pubsDEALLOCATE list_pubsendGODECLARE @name varchar(129)DECLARE list_replicated_tables CURSOR FORSELECT name FROM sysobjects WHERE replinfo <>0UNIONSELECT name FROM sysmergearticlesOPEN list_replicated_tablesFETCH NEXT FROM list_replicated_tables INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'unmarking replicated table ' +@name--select @name='drop Table ' + @nameEXEC sp_msunmarkreplinfo @nameFETCH NEXT FROM list_replicated_tables INTO @nameENDCLOSE list_replicated_tablesDEALLOCATE list_replicated_tablesGOUPDATE syscolumns set colstat = colstat & ~4096 WHERE colstat &4096<>0GOUPDATE sysobjects set replinfo=0GODECLARE @name nvarchar(129)DECLARE list_views CURSOR FORSELECT name FROM sysobjects WHERE type='V' and (name like 'syncobj_%'ornamelike 'ctsv_%' or name like 'tsvw_%' or name like 'ms_bi%')OPEN list_viewsFETCH NEXT FROM list_views INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping View ' +@nameselect @name='drop View ' + @nameEXEC sp_executesql @nameFETCH NEXT FROM list_views INTO @nameENDCLOSE list_viewsDEALLOCATE list_viewsGODECLARE @name nvarchar(129)DECLARE list_procs CURSOR FORSELECT name FROM sysobjects WHERE type='p' and (name like 'sp_ins_%'ornamelike 'sp_MSdel_%' or name like 'sp_MSins_%'or name like 'sp_MSupd_%' ornamelike 'sp_sel_%' or name like 'sp_upd_%')OPEN list_procsFETCH NEXT FROM list_procs INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping procs ' +@nameselect @name='drop procedure ' + @nameEXEC sp_executesql @nameFETCH NEXT FROM list_procs INTO @nameENDCLOSE list_procsDEALLOCATE list_procsGODECLARE @name nvarchar(129)DECLARE list_conflict_tables CURSOR FORSELECT name From sysobjects WHERE type='u' and name like '_onflict%'OPEN list_conflict_tablesFETCH NEXT FROM list_conflict_tables INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping conflict_tables ' +@nameselect @name='drop Table ' + @nameEXEC sp_executesql @nameFETCH NEXT FROM list_conflict_tables INTO @nameENDCLOSE list_conflict_tablesDEALLOCATE list_conflict_tablesGOUPDATE syscolumns set colstat=2 WHERE name='rowguid'GODeclare @name nvarchar(200), @constraint nvarchar(200)DECLARE list_rowguid_constraints CURSOR FORselect sysusers.name+'.'+object_name(sysobjects.parent_ob j),sysobjects.namefrom sysobjects, syscolumns,sysusers where sysobjects.type ='d' andsyscolumns.id=sysobjects.parent_objand sysusers.uid=sysobjects.uidand syscolumns.name='rowguid'OPEN list_rowguid_constraintsFETCH NEXT FROM list_rowguid_constraints INTO @name, @constraint WHILE@@FETCH_STATUS = 0 BEGINPRINT 'dropping rowguid constraints ' +@nameselect @name='ALTER TABLE ' + rtrim(@name) + ' DROP CONSTRAINT '+@constraintprint @nameEXEC sp_executesql @nameFETCH NEXT FROM list_rowguid_constraints INTO @name, @constraint ENDCLOSE list_rowguid_constraintsDEALLOCATE list_rowguid_constraintsGODeclare @name nvarchar(129), @constraint nvarchar(129)DECLARE list_rowguid_indexes CURSOR FORselect sysusers.name+'.'+object_name(sysindexes.id), sysindexes.namefromsysindexes, sysobjects,sysusers where sysindexes.name like 'index%' andsysobjects.id=sysindexes.id and sysusers.uid=sysobjects.uidOPEN list_rowguid_indexesFETCH NEXT FROM list_rowguid_indexes INTO @name, @constraint WHILE@@FETCH_STATUS = 0 BEGINPRINT 'dropping rowguid indexes ' +@nameselect @name='drop index ' + rtrim(@name ) + '.' +@constraintEXEC sp_executesql @nameFETCH NEXT FROM list_rowguid_indexes INTO @name, @constraint ENDCLOSE list_rowguid_indexesDEALLOCATE list_rowguid_indexesGODeclare @name nvarchar(129), @constraint nvarchar(129)DECLARE list_ms_bidi_tables CURSOR FORselect sysusers.name+'.'+sysobjects.name fromsysobjects,sysusers where sysobjects.name like 'ms_bi%'and sysusers.uid=sysobjects.uidand sysobjects.type='u'OPEN list_ms_bidi_tablesFETCH NEXT FROM list_ms_bidi_tables INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping ms_bidi ' +@nameselect @name='drop table ' + rtrim(@name )EXEC sp_executesql @nameFETCH NEXT FROM list_ms_bidi_tables INTO @nameENDCLOSE list_ms_bidi_tablesDEALLOCATE list_ms_bidi_tablesGODeclare @name nvarchar(129)DECLARE list_rowguid_columns CURSOR FORselect sysusers.name+'.'+object_name(syscolumns.id) from syscolumns,sysobjects,sysusers where syscolumns.name like 'rowguid' andobject_Name(sysobjects.id) not like 'msmerge%'and sysobjects.id=syscolumns.idand sysusers.uid=sysobjects.uidand sysobjects.type='u' order by 1OPEN list_rowguid_columnsFETCH NEXT FROM list_rowguid_columns INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping rowguid columns ' +@nameselect @name='Alter Table ' + rtrim(@name ) + ' drop column rowguid'print @nameEXEC sp_executesql @nameFETCH NEXT FROM list_rowguid_columns INTO @nameENDCLOSE list_rowguid_columnsDEALLOCATE list_rowguid_columnsgoDeclare @name nvarchar(129)DECLARE list_views CURSOR FORselect name From sysobjects where type ='v' and status =-1073741824 andname<>'sysmergeextendedarticlesview'OPEN list_viewsFETCH NEXT FROM list_views INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping replication views ' +@nameselect @name='drop view ' + rtrim(@name )print @nameEXEC sp_executesql @nameFETCH NEXT FROM list_views INTO @nameENDCLOSE list_viewsDEALLOCATE list_viewsgoDeclare @name nvarchar(129)DECLARE list_procs CURSOR FORselect name From sysobjects where type ='p' and status = -536870912OPEN list_procsFETCH NEXT FROM list_procs INTO @nameWHILE @@FETCH_STATUS = 0BEGINPRINT 'dropping replication procedure ' +@nameselect @name='drop procedure ' + rtrim(@name )print @nameEXEC sp_executesql @nameFETCH NEXT FROM list_procs INTO @nameENDCLOSE list_procsDEALLOCATE list_procsgoif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergepublications]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergepublicationsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergesubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergesubscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syssubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM syssubscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysarticleupdates]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysarticleupdatesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[systranschemas]') and OBJECTPROPERTY(id,N'IsUserTable')= 1)DELETE FROM systranschemasGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergearticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergearticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergeschemaarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergeschemaarticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergesubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergesubscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysarticles]') and OBJECTPROPERTY(id,N'IsUserTable') =1)DELETE FROM sysarticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysschemaarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysschemaarticlesGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syspublications]') and OBJECTPROPERTY(id,N'IsUserTable')= 1)DELETE FROM syspublicationsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergeschemachange]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergeschemachangeGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysmergesubsetfilters]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM sysmergesubsetfiltersGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSdynamicsnapshotjobs]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSdynamicsnapshotjobsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSdynamicsnapshotviews]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSdynamicsnapshotviewsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_altsyncpartners]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_altsyncpartnersGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_contents]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_contentsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_delete_conflicts]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_delete_conflictsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_errorlineage]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_errorlineageGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_genhistory]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_genhistoryGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_replinfo]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_replinfoGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSmerge_tombstone]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSmerge_tombstoneGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSpub_identity_range]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSpub_identity_rangeGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSrepl_identity_range]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSrepl_identity_rangeGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSreplication_subscriptions]') andOBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSreplication_subscriptionsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[MSsubscription_agents]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)DELETE FROM MSsubscription_agentsGOif not exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[syssubscriptions]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)create table syssubscriptions (artid int, srvid smallint, dest_dbsysname,status tinyint, sync_type tinyint, login_name sysname,subscription_typeint, distribution_jobid binary, timestamp timestamp,update_modetinyint,loopback_detection tinyint, queued_reinit bit)CREATE TABLE [dbo].[syspublications] ([description] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[name] [sysname] NOT NULL ,[pubid] [int] IDENTITY (1, 1) NOT NULL ,[repl_freq] [tinyint] NOT NULL ,[status] [tinyint] NOT NULL ,[sync_method] [tinyint] NOT NULL ,[snapshot_jobid] [binary] (16) NULL ,[independent_agent] [bit] NOT NULL ,[immediate_sync] [bit] NOT NULL ,[enabled_for_internet] [bit] NOT NULL ,[allow_push] [bit] NOT NULL ,[allow_pull] [bit] NOT NULL ,[allow_anonymous] [bit] NOT NULL ,[immediate_sync_ready] [bit] NOT NULL ,[allow_sync_tran] [bit] NOT NULL ,[autogen_sync_procs] [bit] NOT NULL ,[retention] [int] NULL ,[allow_queued_tran] [bit] NOT NULL ,[snapshot_in_defaultfolder] [bit] NOT NULL ,[alt_snapshot_folder] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[pre_snapshot_script] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[post_snapshot_script] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[compress_snapshot] [bit] NOT NULL ,[ftp_address] [sysname] NULL ,[ftp_port] [int] NOT NULL ,[ftp_subdirectory] [nvarchar] (255) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[ftp_login] [sysname] NULL ,[ftp_password] [nvarchar] (524) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[allow_dts] [bit] NOT NULL ,[allow_subscription_copy] [bit] NOT NULL ,[centralized_conflicts] [bit] NULL ,[conflict_retention] [int] NULL ,[conflict_policy] [int] NULL ,[queue_type] [int] NULL ,[ad_guidname] [sysname] NULL ,[backward_comp_level] [int] NOT NULL) ON [PRIMARY]GOcreate view sysextendedarticlesviewasSELECT *FROM sysarticlesUNION ALLSELECT artid, NULL, creation_script, NULL, description,dest_object,NULL, NULL, NULL, name, objid, pubid, pre_creation_cmd, status, NULL,type,NULL,schema_option, dest_ownerFROM sysschemaarticlesgoif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[sysarticles]GOCREATE TABLE [dbo].[sysarticles] ([artid] [int] IDENTITY (1, 1) NOT NULL ,[columns] [varbinary] (32) NULL ,[creation_script] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[del_cmd] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[description] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[dest_table] [sysname] NOT NULL ,[filter] [int] NOT NULL ,[filter_clause] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[ins_cmd] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[name] [sysname] NOT NULL ,[objid] [int] NOT NULL ,[pubid] [int] NOT NULL ,[pre_creation_cmd] [tinyint] NOT NULL ,[status] [tinyint] NOT NULL ,[sync_objid] [int] NOT NULL ,[type] [tinyint] NOT NULL ,[upd_cmd] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[schema_option] [binary] (8) NULL ,[dest_owner] [sysname] NULL) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[sysschemaarticles]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[sysschemaarticles]GOCREATE TABLE [dbo].[sysschemaarticles] ([artid] [int] NOT NULL ,[creation_script] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[description] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_ASNULL ,[dest_object] [sysname] NOT NULL ,[name] [sysname] NOT NULL ,[objid] [int] NOT NULL ,[pubid] [int] NOT NULL ,[pre_creation_cmd] [tinyint] NOT NULL ,[status] [int] NOT NULL ,[type] [tinyint] NOT NULL ,[schema_option] [binary] (8) NULL ,[dest_owner] [sysname] NULL) ON [PRIMARY]GOdeclare @dbname varchar(130)select @dbname ='sp_replicationdboption'+char(39)+db_name()+char(39)+',''merge publish'',''false'''exec (@dbname)select @dbname ='sp_replicationdboption'+char(39)+db_name()+char(39)+',''publish'',''fals e'''exec (@dbname)reconfigure with overridegoselect db_name()</code>Can any one please help me as this is a production machine and needsfixing ASAP.Regards,Ben
View 2 Replies
View Related
Feb 2, 2006
I am developing a mobile application with Visual Studio 2005 RTM. I created a .SDF database from scratch within the Server Explorer window. Based on the properties of the database, this is a version 3.0 DB. I then deploy the application to the Pocket PC 2003 SE Emulator and I receive an error when trying to open the database from my app. It's a very generic error:
System.SData.SqlServerCE.SqlCEException
I trap the error in my code, but there is no message in the exception object.
If I try to open it with Query Analyzer on the device, I get an error stating "The file is not a valid database file". It appears that SQL CE 2.0 was deployed to the emulator.
I noticed that when I add a reference in my project to the System.Data.SQLServerCE namespace, it defaults to this DLL:
C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev2.0System.Data.SqlServerCe.dll
I tried removing that and manually adding a reference by browsing to this 3.0 DLL:
C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0System.Data.SqlServerCe.dll
I then receive the following build error:
Unable to load referenced library 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0System.Data.SqlServerCe.dll': Version 2.0 is not a compatible version.
If I build the database in my application from scratch from within my code, everything works fine, which I believe is because it is a 2.0 database that is generated.
To make a long story short:
How do I get my project to reference the 3.0 SQL Server CE namespace and deploy it to the emulator?
View 1 Replies
View Related
Jul 20, 2005
I'm trying to rebuild from a meltdown. I'm using disk backup files. Icould have sworn that I had SQL Server 2000 SP3 installed on the oldmachine, but maybe not.With SP3 installed, I get a message along the lines that the restorecan't be done because the backup was created using server version134218262 and this server is version 134218488.I've searched the documentation and can't find any reference to thoseversion numbers.In any case, I thought SQL Server 2000 could restore backups createdon any SP level to any SP level.Any ideas?--Regards.Richard.
View 4 Replies
View Related
Sep 18, 2006
Hi,
I can't seen to find any info on the exact version of OS and SQL one needs to run active / active cluster.
I want to run 2 window server 2003 box with SQL 2005 in an active / active mode. What version of windows 2003 and SQL2005 would I need?
Thanks
Frank
View 1 Replies
View Related
Jan 22, 2015
I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime.
OpDatesessionStartTimesessionCloseTime
2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166
2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442
2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853
2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT
opDate,
FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour,
Count(*) AS Total
FROM #empSessionLog
Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00')
Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults:
opDateopHourTotal
2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
View 5 Replies
View Related
May 12, 2008
Hi
I am newbie in SQL Clustering. I have set up a Windows Server Cluster with 2 nodes and am having the following problem with Physical Disk resource for cluster groups:
My Default Cluster Group (named Cluster Group) has IP Address, Network Name, Physical Disk and MSDTC resources. In addition to that my Default SQL Server instance resources are also in this group. I had this initial set up for Active/Passive mode.
Now I am trying to set up a SQL Cluster in Active/Active mode. For this I have to install another instance of SQL Server in the existing cluster and make a separate cluster group for its resources. I made a new cluster group (SQL Instance Group) with an IP Address and a Network Name resource for this new instance but I dont have any Physical Disk resource to allocate to it. As such while installing the SQL Server Instance I get stuck when I'm asked to select the quorum disk to be used.
Is it possible to configure two quorum disks, one for each group?
What's the concept of dedicated disks resource for each sql instance in a group? Is this same as the quorum disk? If this is not a shared disk how do I configure a dedicated disk resource for my second cluster group (SQL Instance Group)?
Anyone could please help me out with this?
View 12 Replies
View Related
Jul 23, 2005
Does anyone know how to get SQL Server versions, Service pack versionsand the Server that instance of SQL is running on a network. I haveseen some threads on how to list SQL servers in a network but I need tofind more info about these SQL servers.Any help appreciated..!Thx...
View 1 Replies
View Related
Feb 19, 2006
Im trying to insert a record in my sql server 2005 express database.The following function tries that and without an error returns true.However, no data is inserted into the database...Im not sure whether my insert statement is correct: I saw other example with syntax: insert into table values(@value1,@value2)....so not sure about thatAlso, I havent defined the parameter type (eg varchar) but I reckoned that could not make the difference....Here's my code: Function CreateNewUser(ByVal UserName As String, ByVal Password As String, _ ByVal Email As String, ByVal Gender As Integer, _ ByVal FirstName As String, ByVal LastName As String, _ ByVal CellPhone As String, ByVal Street As String, _ ByVal StreetNumber As String, ByVal StreetAddon As String, _ ByVal Zipcode As String, ByVal City As String, _ ByVal Organization As String _ ) As Boolean 'returns true with success, false with failure Dim MyConnection As SqlConnection = GetConnection() Dim bResult As Boolean Dim MyCommand As New SqlCommand("INSERT INTO tblUsers(UserName,Password,Email,Gender,FirstName,LastName,CellPhone,Street,StreetNumber,StreetAddon,Zipcode,City,Organization) VALUES(@UserName,@Password,@Email,@Gender,@FirstName,@LastName,@CellPhone,@Street,@StreetNumber,@StreetAddon,@Zipcode,@City,@Organization)", MyConnection) MyCommand.Parameters.Add(New SqlParameter("@UserName", SqlDbType.NChar, UserName)) MyCommand.Parameters.Add(New SqlParameter("@Password", Password)) MyCommand.Parameters.Add(New SqlParameter("@Email", Email)) MyCommand.Parameters.Add(New SqlParameter("@Gender", Gender)) MyCommand.Parameters.Add(New SqlParameter("@FirstName", FirstName)) MyCommand.Parameters.Add(New SqlParameter("@LastName", LastName)) MyCommand.Parameters.Add(New SqlParameter("@CellPhone", CellPhone)) MyCommand.Parameters.Add(New SqlParameter("@Street", Street)) MyCommand.Parameters.Add(New SqlParameter("@StreetNumber", StreetNumber)) MyCommand.Parameters.Add(New SqlParameter("@StreetAddon", StreetAddon)) MyCommand.Parameters.Add(New SqlParameter("@Zipcode", Zipcode)) MyCommand.Parameters.Add(New SqlParameter("@City", City)) MyCommand.Parameters.Add(New SqlParameter("@Organization", Organization)) Try MyConnection.Open() MyCommand.ExecuteNonQuery() bResult = True Catch ex As Exception bResult = False Finally MyConnection.Close() End Try Return bResult End FunctionThanks!
View 1 Replies
View Related
Nov 2, 1999
Hi,
We are trying to set up an active/active configuration of a SQL Server
cluster, and we had a few questions.
Initially, we want to have 2 Database Servers that would share the same
Database (both reading/writing to the same tables).
However, from reading the MS docs, we find out that we can have what
they call an "active/active" configuration using a Cluster but they
need to have 2 different disk sets, i.e. having 2 separate databases.
If this assumption is correct, how does the data get synchronised
between the 2 databases (that are on the 2 different disks sets)?
Can anyone help? thanks
Axel
View 1 Replies
View Related
Oct 12, 2002
ACTIVE/ACTIVE SQL Server 2000 Cluster
This was my plan.
Physical box - box1,box2
virtual box - virtual1
i have a active/passive cluster virtual1 (primary node box1, secondary box2)
I am creating another virtual box on box2 as primary node by name virtual2)
whenever my installation setup runs my default server name is greyed out. it always requires a instance name.
Is that the way it should work?
i can only use instance for active/active failover?
please advice
View 1 Replies
View Related
Sep 27, 2005
Hello folks,
have you ever heard of an Active/Active SQL Sever 2000 Cluster deployed in a pure OLTP environment?
Some 8 years ago I have learned about a bespoke solution for the SAP ERP system (not the BW!) with DB2 Parallel Server for a huge German company. Then again, I would expect that Oracle RAC might fit into an OLTP environment, although I never heard about a real world implementation.
All this led me to believe clustering is good for failover purposes, and for decision support services, not quite for OLTP applications.
So if you see a point in Active/Active Clustering and OLTP please come forward and explain.
Cheers,
Johann
P.S: For those of you who want to know: Consultants from www.hiltes.com want us to deploy an Active/Active Cluster for their Fashion 3000 Net stock software.
View 6 Replies
View Related
Nov 30, 2006
When I execute the query "Select @@VERSION as 'SQL Server Version'" from SQL
Server Management Studio Express, I get '2005 - 9.00......." returned as the
version. When I execute the same query from a VB 6 program, I get "Microsoft
SQL Server 2000 - 8.00.760 (Intel X86)" returned.
What is odd is the VB 6 program had been returning '2005' within the last
two weeks. I have not uninstalled or re-installed 2005 in my environment.
I also executed the following at the command prompt and recieved SQL 2000:
"C:Documents and SettingsAdministrator>sqlcmd -S MARKB-LTXP -U SA -P
medw.1 -q "select @@version"
-------------------------------------------------------------------------------- -------------------------------------------------------------------------------- --------------------------------------------------------------------------------
------------------------------------------------------------
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Personal Edition on Windows NT 5.1 (Build 2600: Service Pack 2)"
When I execute 'exec master..xp_msver' as a query, 2005 is returned but when done from my VB 6 program I get 2000 returned...
Any ideas?
View 4 Replies
View Related
Sep 1, 2014
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
View 4 Replies
View Related
Jul 25, 2006
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
View 1 Replies
View Related
Jan 20, 2004
Hello, Can anyone please explain how the failover processes works on a sql server 2000 2 node active/active cluster.
Given the following
You have 2 node active/active cluster NodeA & NodeB
Question
1. How many SQL instances need to be installed on each node?
2. If the answer to question #1 is one instance per node, then
say if NodeA fails NodeB will take over all the resources of NodeA
including the master database, How does that work , how can once instance (in nodeB) handle two master database i.e its own master database and the one taken over from NodeA.
View 1 Replies
View Related
Feb 19, 2008
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies
View Related
Oct 30, 2007
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies
View Related
Mar 11, 2006
Hi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
View 7 Replies
View Related
Feb 6, 2007
I have the developer edition of MS SQL and applied SP4 to it. Here's what I get when I execute SELECT @@Version:
Microsoft SQL Server 2000 - 8.00.2039 (Intel X86) May 3 2005 23:18:38 Copyright (c) 1988-2003 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
According to the readme, here are the version numbers for each service pack:
SQL Server 2000 Version and Level
@@VERSION
Product Level
SQL Server 2000 Original Release
8.00.194
RTM
Database Components SP1
8.00.384
SP1
Database Components SP2
8.00.534
SP2
Database Components SP3, SP3a or MSDE 2000 Release A.
8.00.760
SP3
Database Components SP4
8.00.2039
SP4
Do I trust the Version Number or the Product Level? Anyone know what the story is? TIA.
View 3 Replies
View Related
Aug 10, 2006
Hi,
I just downloaded the trial version of MS SQL 2005 from Micriosoft website.
However, when I run the setup.exe. it is to install Microsoft Office 2003.
Can anyone help me?
Thanks.
View 3 Replies
View Related
Apr 20, 2007
We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
View 4 Replies
View Related
Mar 12, 2007
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies
View Related
Nov 8, 2007
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
View 1 Replies
View Related
Jun 15, 2006
Hi
I installed RS 2005, SP1 and then the rollup fix 2153 however; if I run http://server/reportserver or view the reportserver log file, it shows version 2047 which is the SP1 version. I have added the tail end of the rollup hotfix log file which shows I have installed it.
Is this a known issue?
06/14/2006 16:03:57.153 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerCatalog.sql
06/14/2006 16:03:57.169 Failed to read version information for the following file: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportServerStylesHtmlViewer.css
06/14/2006 16:03:58.216 Attempting to install file: sqlrun_rs.msp
06/14/2006 16:03:58.263 Attempting to install file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp
06/14/2006 16:03:58.278 Creating MSP install log file at: C:WINDOWSHotfixRS9LogsRS9_Hotfix_KB918222_sqlrun_rs.msp.log
06/14/2006 16:03:58.294 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller
06/14/2006 16:03:58.294 Failed to read registry key: Debug
06/14/2006 16:04:44.826 MSP returned 0: The action completed successfully.
06/14/2006 16:04:45.092 Successfully opened registry key: SoftwarePoliciesMicrosoftWindowsInstaller
06/14/2006 16:04:45.107 Failed to read registry key: Debug
06/14/2006 16:04:45.123 Successfully installed file: \NLDN9577DWWd$89a527f93aa2bb044103hotfixrsFilessqlrun_rs.msp
06/14/2006 16:04:45.139 Restarting RS Service ReportServer since it was previously running
06/14/2006 16:04:45.154 Attempting to start service: ReportServer
06/14/2006 16:04:51.936 Successfully started service: ReportServer
06/14/2006 16:04:51.983 Successfully installed target: NLDN9577DWW
06/14/2006 16:04:51.998 Successfully installed instance: MSSQLSERVER
06/14/2006 16:04:52.014 Successfully opened registry key: SoftwareMicrosoftWindowsCurrentVersionUninstall
06/14/2006 16:04:52.608
06/14/2006 16:04:52.623 Product Status Summary:
06/14/2006 16:04:52.639 Product: SQL Server Reporting Services 2005
06/14/2006 16:04:52.701 MSSQLSERVER - Success
06/14/2006 16:04:52.717
06/14/2006 16:06:05.500 Hotfix package closed
Cheers
Steve
View 1 Replies
View Related
Apr 11, 2004
Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
View 1 Replies
View Related
Apr 27, 2006
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Please help.
Mike.
View 7 Replies
View Related
Nov 25, 2014
I want two write a small script to determine which is the currently active (primary) server in the AG.
Right now, I see that using SELECT * FROM SYS.dm_hadr_availability_replica_states I can determine the role. However, when the server goes down and switches to the secondary node, I don't believe that the role changes (or does it?). How do I determine which is the active node?
View 9 Replies
View Related
Aug 2, 2006
Dear all,
I am a newbies in SQL server. One of my client what to using Clustering and SAN Feature to make his SQL server have high avaliabilty. However, since they want to utilize the SQL server, they would like to active/active cluster with network load balancing. However, questions comes:
1. Can I mount a same database in a Active/Active Cluster environment?
2. If I can do that, how will the SQL server handle those instance/how can I set it up?
3. When there have two users using difference node SQL server to insert data, what will happen?
Please help.
Thanks and Regards
Jacky
View 6 Replies
View Related
Aug 6, 2007
Hello,
at the moment I have the following problem:
We have installed a version of the MSDE 2000 Sp3 with our software since 2005. Now we install SQL Server Express 2005 in order to use the latest version and to be compatible with Vista.
We have never had any problems with the MSDE, so it was no problem that we installed the german version (by mistake) because there never was any output at installation time.
When we now upgrade the existing MSDE installing the new version of our software, there are often problems and there are error messages, unfortunately in german, which cannot be read by most of our international users.
The problem is, that there seems to be no possibility to upgrade the existing (german) MSDE with the english version of SQL Server Express 2005.
My question is, if it is possible to upgrade the german MSDE to the english SQL Server 2005 to enable our international users to read the error messages at installation time in english?
Thanks in advance.
Best regards,
Peter
View 4 Replies
View Related
Sep 18, 2015
we are having the same code base in both the environment but we have different version of SQL Server Version(Env 1 - SQL 2012, Env 2 - SQL 2008). We are getting the expected result in Env - 1 but not in the ENV -2. So we tried to get the SQL trace for the web request we found that Date format getting changed.
2012 - Date Format in the SQL Trace for the request '2015-09-10 00:00:00' which is working as expected.
2008 - Date Format in the SQL Trace for the request 'Sep 10 2015 12:00:00:000AM' which is Not working.
Complete SQL Trace for Request.
Evn - 1 - SQL Server 2012
exec dbo.usp_GetWorkQueue @ClientName='CLT',@HasFilter=1,@FacilityName='',@StartDate='2015-09-10 00:00:00',@EndDate='2015-09-18 00:00:00',@OrderDirection='D',@StartIndex=1,@PageSize=20
[code]...
View 3 Replies
View Related
Nov 20, 2007
Do you need a particular version of SQL Server, i.e. Enterprise, to set up Federated Databases?
View 1 Replies
View Related
