I have a stored procedure what produces N number of rows.
The rows are ordered by a cataegoryType as follows
catA
catB
catC
What is needed to do on the C++ code side is break these out into
their respective categories by iterating through the rows and checking
the category type. Is there a way to let the DB do this via some sort of
subselect on the rows returned via the stored procedure.
Thanks in advance.
Im not sure the best way to go about doing this
i want to pass 2 values to the procedure
one passed value will be a direct insert value
the other passed value will be used within a subselect
and the result from the subselct will be the second inserted value.
Code:
Create procedure InsertSubSelect
(
@Value1 nvarchar(50),
@Value2 nvarchar(50)
)
AS
INSERT INTO Mytable (field1, field2)
VALUES (@Value1,
(select Value2
from Mytable2
where Value2 = @Value2 ) )
Go
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
Is this syntax not supported by SQL Server 2000...?
select count(*) from (select useridentifier from registered_users
where useridentifier < -120)
I have two tables with the following relevant fields:
Apps
appID appName
PBC
pbcID appID appCT
These are joined on appID. appCT can be 1 of 2 values, either "PC" or "LA". So an example of a few records in PBC would be:
1 1 PC
2 1 LA
3 2 PC
4 2 LA
5 3 PC
6 4 LA
...
...
You can see that for each App, in PBC there can be two related records - PC and LA. But for example, record number 5 is App 3 PC, but there is no App 3 LA. I am trying to build a select to tell me which Apps are not in PBC at all, AND which Apps only have either LA or PC, not both.
Help?
Thanks!
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
I'm working on a purchasing website for a store. A request has many line items, and a line item can have many products. One of the characteristics of the line item data table is a total price, calculated from multiplying lineitems.quantity and product.price.
INSERT INTO lineitems (request_id, quantity, product_id, total_price)VALUES (@rid,@quant,@pid,@totalprice)WHERE @totalprice = (SELECT products.price * @quant FROM lineitems, products WHERE lineitems.product_id = products.id)
Visual Studio isnt accepting this. Is there a way to do this better?
How do you combine the following 2 updates into one Update statement (1 SUBSELECT statement)
Update SPLL_Policy
SET SPLL_Policy.Prog_Year =
(Select TOP 1 Prog_Year From SPLL_WinsPolicy_Input
Where SPLL_WinsPolicy_Input.Policy_Number = SPLL_Policy.Policy_Number
ORDER BY SPLL_WinsPolicy_Input.DATE_TIME_RECEIVED DESC)
Update SPLL_Policy
SET SPLL_Policy.Prog_NAME =
(Select TOP 1 Prog_Name From SPLL_WinsPolicy_Input
Where SPLL_WinsPolicy_Input.Policy_Number = SPLL_Policy.Policy_Number
ORDER BY SPLL_WinsPolicy_Input.DATE_TIME_RECEIVED DESC)
Thanks
Harold Hoffman
I have the following table:
CREATE TABLE ITEMS ([ITEMID] int, [itRULE] varchar(1))
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (11, 3)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (12, 3)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (21, 2)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (22, 2)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (31, 1)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (32, 1)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (41, 0)
INSERT INTO ITEMS (ITEMID, itRULE) VALUES (42, 0)
-- Those works and gives me 11,12,21,22
SELECT ITEMID FROM ITEMS WHERE itRULE IN (2,3)
SELECT ITEMID FROM ITEMS WHERE itRULE IN ('2','3')
-- This doesn't works
declare @Rule varchar(10)
set @Rule='2,3'
SELECT ITEMID FROM ITEMS WHERE itRULE IN (@Rule)
Any idea?
I don't mind to change the data type if it works.
I have two tables in which I need to select data from and I don't know what construct to use. The two tables are SY and MV. SY contains stocks and MV contains a log of all price changes of these stocks. I need to produce a report of price changes between the latest price and the previous price and take the difference between the two. I'm using MSSQL. Here are the important fields in my tables:
SY - SY.SYID
MV - MV.SYID
MV - MV.PRICE
MV - MV.DATE
Here is what I have so far:
Code:
SELECT
sy.syid,
sy.sycode,
mv.price,
(SELECT TOP 1(mv.price) FROM MV, SY WHERE mv.syid = sy.syid AND mv.date < '8/27/2007' AND sy.ACTIVE = '1' ORDER BY mv.date DESC) AS lastprice,
(mv.price - (SELECT TOP 1(mv.price) FROM MV, SY WHERE mv.syid = sy.syid AND mv.date < '8/27/2007' AND sy.ACTIVE = '1' ORDER BY mv.date DESC)) AS diff,
(mv.price - (SELECT TOP 1(mv.price) FROM MV, SY WHERE mv.syid = sy.syid AND mv.date < '8/27/2007' AND sy.ACTIVE = '1' ORDER BY mv.date DESC)) /
(SELECT TOP 1(mv.price) FROM MV, SY WHERE mv.syid = sy.syid AND mv.date < '8/27/2007' AND sy.ACTIVE = '1' ORDER BY mv.date DESC) * 100 AS percentdiff,
mv.date
FROM
mv,
sy
WHERE
mv.syid = sy.syid
AND mv.date = '8/27/2007'
AND sy.ACTIVE = '1'
ORDER BY
sy.syid,
mv.date
DESC
Hi,
I have a query which contains 2 subselects joined with a union all. The select for each is just a count, so I'm only returning 2 rows. I then want to be able to perform a calculation between these 2 results... ie divide one by the other to get the percentage.
The only way I could think of doing that was make the whole query a subselect of another query where I could then perform the calculation in the new select statement, however it doesn't like this. I just get incorrect syntax near the closing bracket of the from section.
Any ideas? Thanks!
SELECT *
FROM
(SELECT count(t0.product)
FROM
(SELECT t0.packslip ,
t1.date_upld ,
t0.product AS product ,
t0.qty_topick as topick ,
t0.qty_picked as picked ,
t0.qty_topick - t0.qty_picked as shorted,
(t0.qty_picked / t0.qty_topick) * 100 as linefill
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-3, 101)) t0
UNION ALL
SELECT count(t1.product)
FROM
(SELECT t0.packslip ,
t1.date_upld ,
t0.product AS product ,
t0.qty_topick as topick ,
t0.qty_picked as picked ,
t0.qty_topick - t0.qty_picked as shorted,
(t0.qty_picked / t0.qty_topick) * 100 as linefill
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-3, 101)
AND t0.qty_picked <> t0.qty_topick) t1) t2
Hello,I have a problem with a subselect I use in a stored procedure:UPDATE #TEMP_TABLESET P_ID_1=(SELECT top 1 b.P_ID_1 from #TEMP_TABLE b whereb.ID=PARENT_ID),P_ID_2=PARENT_ID,P_ID_3=IDWHERE PARENT_ID IN (SELECT P_ID_2FROM #TEMP_TABLE b)So the subselect is (SELECT top 1 b.P_ID_1 from #TEMP_TABLE b whereb.ID=PARENT_ID), and it returns NULL. The cause of that is mostprobably the fact that I try to link ID from inner table b withPARENT_ID from the outer table. I thought it had to be done this way,but obviously not. Can somebody help me with this syntax problem?Thx,Bart
View 5 Replies View RelatedNot sure if this is the right group to post this to but.This is the current query that I have.select tableA.id,tableB.artist,tableB.image,from tableA,tableB wheretableA.image = tableB.image AND tableB.price >0 AND tableB.price < 20order by tableB.price DESC'What I need is, for each row returned I need information from a thirdand fourth table. tableC, and tableD.tableC has information ( the tableA.id = tableC.eventId) that I need toobtain tableC.accountId = tableD.accountId in order do select thethe binding information in tableD between a Vendor(name,address..etc..)and tableB.imageAny help would be greatly appreciated.
View 2 Replies View RelatedIs possible to use like hint with subselect? , i mean i want to find all rows in table A that contains a word in a field(CALLED CONTENT) in table B, concretely in a field called content too, i show you the idea although the syntax is incorrect.
select
' + char (39) + @country + char (39) + ' as PAIS,
A.ID,
A.IDUSUARIO MSISDN,
NULL AS MSISDN_COD,
convert(char(19),A.FECHA_ALVENTO, 121) AS FECHA_MO_LOCAL,
NULL AS FECHA_MO_LOCAL_D,
[code]...
Hi,
Hope someone could help me in revising a long running query. Here is the query
select *
from table1
where classid is null
and productid not in (
select productid
from table1
where classid = 67)
In here table1 could have several occurance of productid in which productid could have different classid. The possible values of classid are: NULL,1,2,3,67. Basically I am looking for all records whose classid is null but should never had an instance in table1 where its classid is 67.
Do you have something like a "join" statment that will only include all records in the left table that is not in the right table?
Hope someone could help me with this. Thanks in advance.
-Ruel
Hi,
Hope someone could help me in revising a long running query. Here is the query
select *
from table1
where classid is null
and productid not in (
select productid
from table1
where classid = 67)
In here table1 could have several occurance of productid in which productid could have different classid. The possible values of classid are: NULL,1,2,3,67. Basically I am looking for all records whose classid is null but should never had an instance in table1 where its classid is 67.
Do you have something like a "join" statment that will only include all records in the left table that is not in the right table?
Hope someone could help me with this. Thanks in advance.
-Ruel
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
View 9 Replies View RelatedI have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a sqldatasource, and on the selectcommand I'm trying to use a case statement with a subselect. The case statement works fine without the subselect, but I'm trouble getting it to work with the case statement. Could you help me with the syntax? ThanksSelectCommand="
SELECT DISTINCT RecipeID, Title
FROM [Recipes]
WHERE
(CASE WHEN @Type='Appetizer' THEN Appetizer
WHEN @Type='Pies' THEN
(Select Distinct RecipeID, Title From Recipes
WHERE Title like '%Pie%')
WHEN @Type='Beverages' THEN Beverage
WHEN @Type='Dessert' THEN Dessert
WHEN @Type='Kids' THEN Kids
WHEN @Type='Side' THEN Side
WHEN @Type='Soup' THEN Salad
WHEN @Type='Main' THEN Main
WHEN @Type='Breakfast' THEN Breakfast
END) = 1"
Help!I'm trying to understand the new ANSI join syntax (after many years ofcoding using the old style). I am now working with an application that onlyunderstands ANSI syntax so I am struggling.My first (old style syntax) SQL statement below produces 60 rows:SELECT A1.CONTACTID, A1.LASTNAME, A1.FIRSTNAME, A1.ACCOUNT,A6.CITY, A6.STATE, A1.WORKPHONE, A1.FAX, A1.EMAILFROM CONTACT A1,ADDRESS A6WHERE A1.ADDRESSID=A6.ADDRESSIDAND A1.CONTACTID IN(SELECT A4.CONTACTIDFROM CONTACT_LEADSOURCE A4,LEADSOURCE A5WHERE A4.LEADSOURCEID = A5.LEADSOURCEIDAND A5.DESCRIPTION = 'some_description' )AND A1.CONTACTID IN(SELECT A2.CONTACTIDFROM TICKET A2,ENROLLHX A3,EVENT A7WHERE A3.STATUS IN ('R', 'Confirmed')AND A2.TICKETID = A3.EVXEVTICKETIDAND A3.EVENTID = A7.EVENTIDAND A7.CODE IN('AHS00','AHS01','AHS02','AHS03','AHS04','AHS98',' AHS99'))ORDER BY A1.LASTNAME ASCI am trying to convert this to the newer ANSI sytax. My second SQL statementbelow produces 67 rows (duplicates):SELECT A1.CONTACTID, A1.LASTNAME, A1.FIRSTNAME, A1.ACCOUNT,A6.CITY, A6.STATE, A1.WORKPHONE, A1.FAX, A1.EMAILFROM CONTACT A1JOIN ADDRESS A6 ON (A1.ADDRESSID=A6.ADDRESSID)JOIN( SELECT C.CONTACTIDFROM CONTACT CJOIN CONTACT_LEADSOURCE A4 ON (C.CONTACTID= A4.CONTACTID)JOIN LEADSOURCE A5 ON (A4.LEADSOURCEID =A5.LEADSOURCEIDAND A5.DESCRIPTION ='some_description' )) AS C1 ON C1.CONTACTID = A1.CONTACTIDJOIN(SELECT C2.CONTACTIDFROM CONTACT C2JOIN TICKET A2 ON (C2.CONTACTID =A2.CONTACTID)JOIN ENROLLHX A3 ON (A2.TICKETID =A3.TICKETID AND A3.STATUS in ('R', 'Confirmed'))JOIN EVENT A7 ON (A3.EVENTID = A7.EVENTIDAND A7.CODE IN ('AHS00','AHS01','AHS02','AHS03','AHS04','AHS98',' AHS99')))AS C3 ON C3.CONTACTID = A1.CONTACTIDCan anyone shed some light on what I am missing?cheers,Norm
View 3 Replies View RelatedI have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
I'm running the following test query on a single table:
SELECT sph.datestamp, sph.stocksymbol, sph.closing, DATENAME(dw, sph.datestamp),
CASE DATENAME(dw, sph.datestamp)
WHEN 'Monday' then 'Monday'
ELSE (SELECT CAST(sph2.datestamp AS nvarchar) FROM BI_Test.dbo.StockDB AS sph2 WHERE sph2.DateStamp = DATEADD(d, -1, sph.datestamp) AND sph2.StockSymbol = 'NYA')
END AS TestCase,
[Code] ....
And here's an example of the output I'm getting:
Why the exact same subquery in the THEN of the second CASE statement is returning NULL when the first one completes as expected?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END.
Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
View 16 Replies View RelatedI have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system.
I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible?
Thanks,
Kevin
This is the Stored Procedure below ->
SET QUOTED_IDENTIFIER ON GOSET ANSI_NULLS ON GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 5/18/2007 11:28:41 AM ******/if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[BPI_SearchArchivedBatches]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)drop procedure [dbo].[BPI_SearchArchivedBatches]GO
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/3/2007 4:50:23 PM ******/
/****** Object: Stored Procedure dbo.BPI_SearchArchivedBatches Script Date: 4/2/2007 4:52:19 PM ******/
CREATE PROCEDURE BPI_SearchArchivedBatches( @V_BatchStatus Varchar(30)= NULL, @V_BatchType VARCHAR(50) = NULL, @V_BatchID NUMERIC(9) = NULL, @V_UserID CHAR(8) = NULL, @V_FromDateTime DATETIME = '01/01/1900', @V_ToDateTime DATETIME = '01/01/3000', @SSS varchar(500) = null, @i_WildCardFlag INT)
AS
DECLARE @SQLString NVARCHAR(4000)DECLARE @ParmDefinition NVARCHAR (4000)
IF (@i_WildCardFlag=0)BEGIN
SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END
ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 '
if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end
if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end
END
PRINT @SQLString
SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)'
EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS
GO
SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric.
REQUIREMENT:
The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
Please help me regarding the same.
Thanks in advance.
Sandeep Kumar
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing
for each user name in a temporary table (already done)
total = result from execute totaling stored procedure
Can you help with this
Thanks
Hi there
i have a stored procedure like this:
CREATE PROCEDURE SP_Main
AS
SET NOCOUNT ON
BEGIN TRANSACTION
exec SP_Sub_One output
exec SP_Sub_Two output
IF @@ERROR = 0
BEGIN
-- Success. Commit the transaction.
Commit Tran
END
ELSE
Rollback Tran
return
GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the
"SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
Thanks in advance
Mahmoud Manasrah