Is It Possible To Develop A Custom Report Item Other Than Image Type
Sep 10, 2007
I have developed a renderer that renders the xml to paint a rectangle with textboxes in all the right places based on the data retrieved off the database. When i render the a complete report to the reportviewer i have no problem.
I need however to render the rectangle into a custom report item for reusability and different scenarios. This just seem to be impossible since it seems like I cant use anything other than an imagemap to render custom report items. Is this true?
To make sure you understand....in other words....
Is there a way to develop a Microsoft.ReportingServices.ReportRendering.IRenderingExtension that renders the required xml like rectangles/textboxes etc. and then migrate this to a custom toolbox item. It just seems like this should be a very easy thing to do and something regularly needed. For example when you want to use textboxes in certain positions within a rectangle to draw a organisational chart.
I have developed a custom report item that works fine in design and preview mode while in Visual Studio. I cannot get it to show up on my deployed reports. Here's what I have done so far:
1. Deployed the report using Visual Studio
2. updated the rsreportserver.config file with the following entry:
I've also tried using the StrongNameMembershipCondition with no better results.
4. The dll and its dependencies are copied to the bin directory of the report server.
5. When I load a report with this custom report item on it, the report loads fine with no errors or warnings in the log file (even with verbose tracing). The area where the custom item should be is just white. It's almost like Reporting Services isn't registering the item correctly.
This is particularly frustrating because the report works fine in Visual Studio - apparently I configured that correctly. Any suggestions would be greatly appreciated. I'm stumped.
How would one go about setting the height of a custom report item programmatically?
I have a custom report item that renders back an image of indeterminate height. I cannot simply set RenderItem.Sizing = Image.Sizings.AutoSize; As the image is being rendered back at 300 dpi and will require being set to FitProportional. Therefore I need to set the height to a scale height. I've tried setting CRI.Height to a ReportSize value, but it tells me that I cannot because of the current state of the item.
I'm developing a Custom Report Item that generates a BarCode.
I developed all control functionality but now the problem resides on the Deploy Process.
For the fisrt time I followed 2 steps to deploy component on Visual Studio:
1) Copy the dll on " Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssemblies " 2) Configure the control in "Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssembliesRSReportDesigner.config"
On the other Hand I configured SQL Server Reporting services doing that:
3) Copy the dll on " Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerin " 4) Configure the control in "Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer sreportserver.config"
We are developing a custom report item but we cannot find a way to get the report parameters. In Vb examples there is mentioning of globals but these do not seem to be present in the c# enviroment.
Could anyone give a solution on how to get to the report parameter collection in run-time.
I'm looking at creating a custom report item which will allow me to input data into a textbox on the rendered report and dynamically update a textbox or another custom report item once I leave focus of that initial textbox. Is there a way to accomplish this? I have read that you can only create CRIs which use "graphic elements and images". Is that a true statement?
The reason why I don't want to have the initial value as a parameter is becuase the client doesn't want to have to click "View Report" everytime they want to see an updated value.
I am having a problem with deploying a CRI. On my local machine the CRI works fine, only at the development machine it doens't works. I did the following steps:
copy the .dll to the C:Program FilesMicrosoft Visual Studio 8Common7IDEPrivateAssemblies
copy the .dll to the C:Program FilesMicrosoft SQL ServerMSSQL.4Reporting ServicesReportServerin
put this code in rsreportserver.config: <ReportItems> <ReportItem Name="BusinessConnectDiagram" type="LogicaCMG.BusinessConnect.DiagrammingCRI.GenerateDiagramRenderer,LogicaCMG.BCDiagramming"/></ReportItems>
put this code in rssrvpolicy.config: <CodeGroup class="UnionCodeGroup" Version="1" PermissionSetName="FullTrust" Name="BusinessConnectCodeGroup" Description="Code group for the Business connect diagrammer"> <IMembershipCondition class="StrongNameMembershipCondition" version="1" PublicKeyBlob="002400000480000094000000060200000024000052534131000400000100010051C346CB2A79947C83804E550CF1561729DB2B5C7DEFF93758E419F16390A295DF4906ADD8FD9A29559D5E3C8BFA73D8D21B64724B1B0E688091C1541FD54D5290D6968C73E9ACA842B1E42AB3DE369F7B545933C8E101A737BB7D22F937921E7F02E00C5121D1DC312DBE96154E5A4E47BD7F489A655A09CF08EABCFB6AB7C1" /></CodeGroup>
put this code in rsreportdesigner.config <ReportItems> <ReportItem Name="BusinessConnectDiagram" type="LogicaCMG.BusinessConnect.DiagrammingCRI.GenerateDiagramRenderer,LogicaCMG.BCDiagramming"/> </ReportItems> <ReportItemDesigner> <ReportItem Name="BusinessConnectDiagram" Type="LogicaCMG.BusinessConnect.DiagrammingCRI.GenerateDiagramDesigner,LogicaCMG.BCDiagramming" /></ReportItemDesigner I get the following error message: Could not load file or assembly 'ReportingServicesWebServer,
Also when i stop Reporting Services it won't start again. I get a timeout.
I read that this sample is included, however when I install the samples the other three are in the "Extension Samples" directory but the "Custom Report Item Sample" is missing. Can anybody please tell me where I can find it?
I'm developing a Custom Report Item and would like to fill my properties dialog in design mode with real data. I have the name of the data source and the command text for the corresponding report dataset, read from the report design.
Is it possible to create an ado.net dataset so that I can display and use real data in my properties dialog box? First problem I have is to get the connection string from the data source string. I found no docs for that, especially the Microsoft.ReportingServices.DataExtensions.ReportDataSource class is not documented. Am I on the right way with that?
Hi All, I want to get the Font,Background colors of the report item(Textbox) changed in Runtime,According to the value in the Textbox. The idea is to get this done by using the Same Custom code for getting both the Foreground,Background colors, I thought to implement this with flag, But I dont know how to do this..
Reporting experts ..please help me with this issue.Thanks in Advance
I am using the QRCode4CS class [URL] .... to generate QR codes.
I can use the following code to successfully return a bitmap image to a picturebox in a Windows Form Application.
public class CreateQRCodeClass { public static Image CreateQRCodeImage(string inputString) { QRCode4CS.QRCode qrcode = new QRCode4CS.QRCode(new QRCode4CS.Options(inputString)); qrcode.Make(); [Code] ....
In trying to adapt the same code (below) to display a QR code in an SSRS report I get the error "There is an error on line 1 of custom code: [BC30311] Value of type 'System.Drawing.Image' cannot be converted to '1-dimensional array of Byte.'
Here is the custom code I am using.
Public Function QRCode(ByVal RetailerId As String) as Byte() Return QRCode4CSCreateQRCode.CreateQRCodeClass.CreateQRCodeImage(RetailerId) End Function
Here is the revised custom assembly.
public class CreateQRCodeClass { public static byte[] CreateQRCodeImage(string inputString) { QRCode4CS.QRCode qrcode = new QRCode4CS.QRCode(new QRCode4CS.Options(inputString)); qrcode.Make(); Image canvas = new Bitmap(86, 86);
[Code] ....
What data type can I successfully return to SSRS to display the image?
I've been using Konesan's FileWatcher control-flow item successfully in design-mode on my PC, which runs the package on a remote server.
I have installed the Konesan's FileWatcher on the remote SQLServer machine. I then imported the package to the server (Files System folder). I then select the package, right-click 'Run Package', then Execute, and receive the error:
"Error: The task 'File Watcher Task' cannot run on this edition of Integration Services. It requires a higher level edition"
..in the 'Package Execution Progeress' dialog. All other validation seem to be ok.
(Note, I'm executing the above steps using SQLServer Mgt Studio from my PC ; I'm not doing it from the SQLServer machine itself...not sure if this matters or not.)
The SSIS version installed on the server is 9.0.3054. It shouldn't be an "SSIS version issue", as it is the same SQLServer that I used (successfully) from my PC in design mode...
Now, the developement in SqlServer Clr is obviously different from the develop in normal programs. there are many limitation in Clr develop, and it take many work to use dll alread exsits in Clr develop.
I do know that some limitation is reasonable, BUT much more limitation should be removed.
For example, now in order to use enum that exists in old dll in sqlServer, we have to create a new project and write many similar class to wrap the old enums, it's very troublesomely and slow!
so pls make the develop model consistent as possible.
I've got a big problem that I'm trying to figure out:I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.I don't need this for an individual ID select, I need it applied to every record from the table.My address table has some columns that look like: [AddressID] [int][LocationID] [int][Type] [nvarchar](10)[Address] [varchar](50)[City] [varchar](50)[State] [char](2)[Zip] [varchar](5)[AddDate] [datetime][EditDate] [datetime]AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table.So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.How can I do this efficiently with perfomance in mind???Thank you in advance for any and all replies...
I've got a big problem that I'm trying to figure out:
I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like: [AddressID] [int] [LocationID] [int] [Type] [nvarchar](10) [Address] [varchar](50) [City] [varchar](50) [State] [char](2) [Zip] [varchar](5) [AddDate] [datetime] [EditDate] [datetime]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table. So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
I have developed a renderer that renders the xml to paint a rectangle with textboxes in all the right places based on the data retrieved off the database. When i render the a complete report to the reportviewer i have no problem.
I need however to render the rectangle into a custom report item for reusability and different scenarios. This just seem to be impossible since it seems like I cant use anything other than an imagemap to render custom report items. Is this true?
To make sure you understand....in other words....
Is there a way to develop a Microsoft.ReportingServices.ReportRendering.IRenderingExtension that renders the required xml like rectangles/textboxes etc. and then migrate this to a custom toolbox item. It just seems like this should be a very easy thing to do and something regularly needed. For example when you want to use textboxes in certain positions within a rectangle to draw a organisational chart.
I am using SQL Server 2005 Reporting Services. Right now, I have a textbox with 0 or 1 values in my report and I want to show a checkbox: checked for value 1 and uncheck for 0. Is there anyway to add a checkbox in the report?
I have been asked to write a piece of code that will insert an image object into a database using a stored procedure and the Microsoft Enterprise Library. Has anyone done this before? Do you have any code examples about how to update a database with an image datatype that needs to be chunked, etc...
In this instance, I need to open up a word document and save the contents as an image in a database.
hi, i'm a student doing my final year project. during the user requirements stage, my client proposed storing all files (.doc, .jpg, .mp3) into the sql database. i found out that the way to do this is to write the files as binary data in order to store them in the database. my concern is will this data storage overload the database server? i read somewhere that the retrieval of data as binary data is the same as retrieving text. but the estimation of users is around 27,000.. if i'm not wrong, the sql database server should be MS SQL Server 2005, or at least 2003.
I have a field in my personal table that has image data type as Pic,my SQL code is : SELECT Department.ID,Department.[Name],Department.CreatedDate,Department.[Pic] ,COUNT([Group].[Name]) FROM Department INNER JOIN [Group] ON Department.ID=[Group].DepartmentID Group by Department.ID,Department.[Name],Department.CreatedDate,Department.[Pic] This error occured : Msg 306, Level 16, State 2, Line 1 The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. Please help me. Thanks.
Hi, I have a table with a column having image data type in it.I need to move four records from this table to another table in development box.Can any one suggest me how can i do this? I don't think insert into select * will insert image data type.Is there any way around? thanks Mohan
1. How can I upload new pictures into the database through the browser. 2. Can you describe how the new picture of the product would be uploaded into the database. 3. How do you handle different formats that pictures come in gif, tif, jpeg, etc.
4. How can you say that SQL server does support images well, because on microsoft site they loaded up the satellite data of the earth into sqlserver which is only picture data
I'm developing a website with SQL SERVER 2000 and IIS6 (beta). I'm using ASP.NET webforms for my application. I was wondering if anyone knows how to use the Image datatype for dynamically loading images/word docs/sound files
pls. Help! I am not getting that how to use the image datatype in sql server 2000 when i am inserting text to it and on retrieving it is showing hexadecimal string ... I want to know all of your views on the usage of image datatype.. Thanks...
Hi,In my SQL Server 2000, I have a Table MyUser which has one colum PassWord,and the PassWord's datatype is Image. I'm wondering how can a password bean image.Thanks for help.Jason