Is it possible to say for example have the first page that contains a chart in portrait layout and the rest of the report that is a table in landscape layout?
View 3 RepliesHi, all experts here,
Thank you for your kind attention.
I am wondering if we can drill down reports in a different page with different layouts and columns? e.g. I have too many columns desired to see in a report, so I want to direct the users to another page with different layouts and columns, so the first view in the report wont display so many columns in a page. Is it possible to make it in SQL Server 2005 Reporting Services? And if it is possible then how? Hope my question is clear for your help.
Thanks a lot in advance and I am looking forward to hearing from you.
With best regards,
Yours sincerely,
I in a table or partition, the first page is an IAM-Page if I'm not wrong, this page keeps track of the extents.
In the first extent to where the "first_iam_page" points to, the extent is a mixed extent, therefore the pages can be from different tables or partitions, correct? How does my IAM-Page map the right pages to the corresponding table? the following extents are all uniform of one table type, so I guess it doesnt matter then. But n, how does it keep track of which pages belong to which tables in the first extent?
My second question is, the first IAM-Page is obviously an IAM-Page, but there are also GAM , SGAM and PFS Page files... where are they stored? Because when I create a table and insert a big value(8000) into it, it reserves 16KB for that table, one for the IAM-page, and one for the first data-page. But where can I find the GAM,SGAM and PFS page files? or are they not page files, just some other structures?
I have a text box that contains a memo field. It's located in the middle of the report page. If the data is too big to fit on the bottom half of the report, then it goes to the next page. This leaves a blank bottom half on the first / initial page. How can I get the textbox to split across pages and not go to a new page automatically?
View 3 Replies View RelatedIf a single row of data spans a page then the column header is not repeated until the next row on the next page.
Is there a way to overcome this?
Friends,
I am using SSRS (Sql server reporting services) for one of my report related to EIS-MIS.
i want group wise page numbering and also display the no. of pages for that particular group.
e.g suppose group 1 has 5 pages then it should display
page no. 1 /5, 2/5,3/5,4/5, 5/5. now suppose group change then it shold display 1/4 like this
I have already implemented groupwise page numbering using then custom code and i have call that function from the header portion of the report.
now the question is how can i display the total no. of pages in particular group?
For that i have add one count column in query itself but as we know we can't use field value in header and footer portion and also we can't use global variables in data portion.
So kindly guide me
Thanks,
Manoj Patel
I am staring to lose my mind on all this "work-around" BS in trying to create a dynamic header.
I have a report with contains a table, whose first two lines are a header line in which I want to repeat on each page. Then I have about 20 detail rows of information related to the header. The 21st detail row is a merged cell that contains a subreport relating to the header item.
When printing to PDF, the detail rows consume about half the page and the subreport is anywere from half a page to several pages long. When the subreport is more than half a page, it skips the end of the first page and starts on the top of the next page, leaving the bottom half of the first page blank. No matter what I set the page breaking to, it continues this behavior. In addition, when the subreport data spans more than one page, my parent table's header row will not print to the next page even it the RepeatOnNewPage is set to true.
I am coding this way because I have found no good way of creating a dynamic header that will correctly and consistantly display data that has detail that spans more than one page.
Any thoughts on what I might be doing incorrect?
Hi
I have set my SQL server express server and have installed SSRS (reporting services) and Business Intelligence Studio.
When i create a new report and delpoy that report, it successfully deploys it.
when I go to the below URL's from the laptop browser, I am successfully able to see my reports
http://lemd342608/Reports$SQLExpress/Pages/Folder.aspx - Report manager
http://localhost/reportServer$SQLExpress - report server
Now when I go to a external machine besides my laptop, and type in the 'URL's I am getting 'Page cannont be displayed error'.
DO I need to configure anything in order to allow other users to access my SSRS. I have added the users in the Reporting manager also.
Thanks
Hi!
I've posted a feedback with Microsoft to see if we can get them to fix the issue described below, but so far no one from Microsoft has commented to let us know what they're doing about this problem! I'm posting this here to see if maybe we can get more people to rate this feedback or chime in on what a pain it is! Please feel free to add your own comments or how you had to work around this issue and whether or not you think this is something Microsoft should be addressing NOW.
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=311679
Provide Individual Page Numbering per Group and Total Pages per Group
Currently in a Reporting Services report, you can't readily reset the page number for each group in a table, nor can you display the total number of pages per group. For example, if I'm printing invoices and each invoice is a separate group, I'd like to be able to print "Page 1 of 5" , "Page 2 of 5" etc. for the first invoice, then "Page 1 of 3" when the next invoice begins, and so on. This was easy in Crystal Reports. I realize that Crystal Reports has a two-pass process that enables that kind of pagination. However, this is REALLY important functionality that's just missing from Reporting Services and I'm hoping you'll provide it REALLY SOON! Yeah, I know there are work-arounds if you can know exactly how many rows of information there are on each page. But gosh! That's not practical, especially if you have second level groups inside the main group or text blocks in rows that can 'grow' to more than one line. I've read a couple of work-arounds, but none of them works correctly and consistently when more than one user is running the same report or when you print the report while you're looking at it on the screen. I still may need access to the overall report page number and the overall total number of pages, so don't get rid of that. It's just that if you're doing this already for the entire report, I don't see why you can't do it per group! Lots of people have been asking for this for years, and I don't understand why it hasn't been implemented.
I've read a few articles on this topic, but no one has come up with a decent work around. My theory is that Microsoft should be addressing this immediately. This is major functionality that's just plain missing from SSRS and should have been there from the start. If anyone from Microsoft can let us know what's going on with this issue or if anyone would like for me to clarify this further, feel free to let me know.
Thanks!
Karen
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
Opening DimTime table of AdventureWorksDW sample database in MS SQL Server Management Studio shows me values in FullDateAlternatKey like
View 3 Replies View RelatedHi DBA's,
I need to break up a 34 byte column into several columns. Here is my problem.
Table A:
Col1..Col2..Col3..Col4..Col5..Col6..Col7..Col8..Co l9..Col10
Col 9 is char (2) and Col10 is char (34). It is this column that needs to be broken up into several columns depending on the value in Col 9.
Col1 to Col3 is the key to the record.
So say if record 1 has Col 9 value 'AA' then Col10 ( 34 bytes) is to be spilt into 10+10+10+4 (four columns).The value 'AA' can repeat for several records and the value in Col 10 can change for the same value 'AA'.
Now say record 27 has Col 9 value 'BB' then Col 10 is to be split as 5+25+4 (3 columns).
There are 15 such unique values of Col 9. I have the file layouts for Col 10 for each distinct value of Col 9. So using the file layouts and Table A which exists in my database how do I proceed.
Need I make 15 tables ( one each for the 15 unique Col 9 values). These structure
Col1..Col2..Col3...Col9 (the key fields and Col 9) will be common to every table. Plus the file layouts will serve as additional columns specific to each of these tables.
Kindly help.
Vivek
We have a flat file format generated from a vendor. It contains a "mainframe" view of the data with a header record, batch header record, detailed records, batch trailer record and trailer record. It arrives as a .dat file. What is the best approach to extract the necessary columns out of this file to populate the corresponding SQL server tables and rows?
View 3 Replies View RelatedI am trying to load a file using SSIS that contains records with two different layouts in one data file but in the flat file connection I can only specify one layout and this is causing the records with the second layout to be loaded incorrectly.
The different record layouts can be identified by the first character of the record. Example: If Field begins with "A" then assign one layout; "B" assign second layout.
Has anybody come accross this issue, if so some guidence would be appreciated.
Thanks,
ire_ssis
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedHello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
The following objects are placed on the Report body of the Report pane of SQL Server 2005 Reporting Services :
<textbox: expression1>
<textbox: expression2>
<table:table1 with at least 30 columns and 30 expressions>
<textbox: string1> - considered as the Title in the Footer section of the report
<texbox:string2> <textbox:expression3>
<textbox:string3> <textbox:expression4>
<textbox:string4> <textbox:expression5>
<textbox:expression6>
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Thanks in advance
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
Hello,
If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11
Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header.
If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side.
Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies View Related
Hi,
I issued this command on Tempdb but it doesnot shrink the file.
dbcc shrinkfile (tempdev_3,1)
go
Messages:
-----------------------------------------------------------------------------------------------------------
DBCC SHRINKFILE: Page 4:11283400 could not be moved because it is a work table page.
-----------------------------------------------------------------------------------------------------------------------------------------------
I have checked that there are no tables associated with any user in tempdb. Any help is appreciated.
Regards,
Razi
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
Thanks.
DanYeung
Hi Team,
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedI have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies View RelatedHow do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View Related In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
I am running a DBCC SHRINKFILE on "FILE1" of a database (it has fileid = 1)...intent is to remove 70GB of file space:
DBCC SHRINKFILE (N'FILE1' , 400000).
For the SPID that's doing the shrink, In activity monitor you can see:
Waittype: PAGEIOLATCH_EX on resource: 9:3:15411328
(the DB is dbid=9)
But why does it need a page from fileid=3? Are there page dependencies between files that prevent moving a page within a given file? Does it need that fileid3 page to come along?
Its just sitting there in the SUSPENDED state for the last hour....I am going to leave it another 5 hours or so before cancelling.
The dm_exec_requests has an estimated percent complete at 83% and holding....not sure if I can believe that.
Hi all
I have a problem which I am really struggling with. I have a report that normally spreads over three pages. We have a list setup so that for each customer it picks up fees and expenses and displays it in sections. We have a page break after FEES so that expenses start on a new page. FEES and expenses are tables.
We need to have a page footer set for the bottom of the report but to appear on the first page only per customer. I.e. we do not want it showing on the EXPENSE pages. We have played with the IIF command but can not seem to print htis per customer only by using global variables.
=IIf(Globals!PageNumber=1,"(Please note 30 day invoice period)
The example above however only prints on the first page of the entire report. So if three customers appear then this will only appear for the first customer and I have a feeling I may not be able to link this to list.
If I can not use a page break and enter this into the list then I have a problem with the text field moving up and down depending on the size of the FEE section. For example if 5 fees are brought back then the text field will be lower then a customer that has only 2 fees.
I after a solution that can either allow my page fotter to appear every time a new customer appears on a page and hiddern for the sub sheets. Or the ability to allow my text field to start at a fixed position on my report. Has anyone had a similar issue.
thank you
Michael
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave