I'm using Visual Basic 2005 Express and SQL Server 2005 Express. I have textboxes on a VB form linked to 2 database tables.
I am wondering if it is possible to use just ONE BindingNavigator to manage data entry and updates to THE database tables. I initially thought I could manage the tables but have I encountered some problems:
i)When I entered a new record, and clicked on the SAVE BUTTON the new record the textboxes for the 1st table saves the record to the database, but the textboxes for 2nd table still retained data in them and are not saving theirs to the database.
ii) The same textboxes for the 2nd table are NOT allowing for updates too! Or, could it simply be that it is not possible to use this method for data entry and updates?
I got anywhere from a couple hundred to a hundred thousand records that need to be updated or inserted into their SQL Server 2005 end destination. What are some of the best ways to accomplish this? Right now we are doing it manually through line by line updates and inserts. Would I use BC or some other bulk import tool?
I have a project that consists of a SQL db with an Access front end as the user interface. Here is the structure of the table on which this question is based:
Code Block
create table #IncomeAndExpenseData ( recordID nvarchar(5)NOT NULL, itemID int NOT NULL, itemvalue decimal(18, 2) NULL, monthitemvalue decimal(18, 2) NULL ) The itemvalue field is where the user enters his/her numbers via Access. There is an IncomeAndExpenseCodes table as well which holds item information, including the itemID and entry unit of measure. Some itemIDs have an entry unit of measure of $/mo, while others are entered in terms of $/yr, others in %/yr.
For itemvalues of itemIDs with entry units of measure that are not $/mo a stored procedure performs calculations which converts them into numbers that has a unit of measure of $/mo and updates IncomeAndExpenseData putting these numbers in the monthitemvalue field. This stored procedure is written to only calculate values for monthitemvalue fields which are null in order to avoid recalculating every single row in the table.
If the user edits the itemvalue field there is a trigger on IncomeAndExpenseData which sets the monthitemvalue to null so the stored procedure recalculates the monthitemvalue for the changed rows. However, it appears this trigger is also setting monthitemvalue to null after the stored procedure updates the IncomeAndExpenseData table with the recalculated monthitemvalues, thus wiping out the answers.
How do I write a trigger that sets the monthitemvalue to null only when the user edits the itemvalue field, not when the stored procedure puts the recalculated monthitemvalue into the IncomeAndExpenseData table?
I've been quite excited about SQL Server MDS that should allow non-IT staff to easily maintain data. However maintaining data that have many-to-many relationships seems to be quite a pain. I believe the best way is:
Open up your MDS web interfaceGo to entities > product (for example)Add a new member and fill the details Click "product parts" in the bottom right "Related Entities" partAdd a new memberTry and find the product you just created from the dropdownlistSelect the first part and click OKAgain try and find the product you have created from the dropdownlistSelect the second part and click OKRepeat...Close the tab on your browser and finish your product entity.How I wish it worked:
Open up your MDS web interfaceGo to entities > product (for example)Add a new member and fill the detailsCheck a checkbox for each part visible under "product parts" in the bottom right "Related Entities" partFinish your product entity.
Hello,I am working on an ASP.NET web site using an SQL database. Is there a way to Insert/Delete and Update data in the database without creating all the forms in ASP.NET?Since I am the only person to work with the database it would be easier for me than creating all ASP.NET forms.Thanks,Miguel
1. The user may browse any website on the internet that may be in any language and enter the data into my application. 2. The data entered can be in English or any other language. 3. That’s were the problem arises; the data that enters the database other than English is displayed in wrong format like small boxes. 4. The user who had previously entered the data in the database can also alter that data. So when I display the data (other than English) to him it is not in the format in which the user had entered.
So can anybody help me out how to manage multilingual data?
Hi All, How do I input a large text page (notepad) into a SQL column. Or assign a pointer to the data. I've tried to use BOL (writetext) and to no avail, I guess I'm missing something. I'm just using EM and Query analyzer. I thought this should be easy. Image data should work the same way.
I have an aplpication whih collect different types of history data from an SQL database. On type of those data are hitory log information where amount of records can be really big.
What i would like to implement is a kind of paging mecanism for colelcting those data. fro example the first call will retrun the first 100 rows, then the next call would get rows 101 to 200 . etc....
iam new to MS SQL 7 server...i have two tables in my database say Table1 and Table2 having a comman field--- Name String(30). I want that dual data entry should be made for any single entry. That is if a name is entered in Table1, then same entry should be automatically entered in table2
question... i heard a bit about Control Macro Generator but have not found much reading material on it. here at our company we have employees fill out a weekely timesheet and typically have clerks enter the information into the TM.PTA.00 (Project Timesheet with Rate/Amount Entry) and submit it that way. say we have this timesheet in a nice little excel sheet with columns that match the input boxes on the form, how can we get it to automatically input the data instead of having a person sit there and type it all in?
We have several read-only nodes in our AlwaysOn cluster, which are set to use Synchronous-commit mode, which ensures that the logs are updated on the read-only nodes before any update statements complete. Even with this option, if we query a read-only node before the logs have been processed, we can read old data. I would like to know a strategy to ensure that a read-only query will definitely return up to date information. I had an idea that if I just used a different transaction type, like Serializable, that it might block the read-only query from actually getting the data until after the log file was processed, but I have not tried it, yet.
I would like to move more queries to the read-only nodes, in an effort to offload CPU utilization from the primary node.
Hello Everyone, I have a web form that allows the user to select a time to reserve. I am trying to make it so that when a user selects a date to schedule something (which i have working) a drop down list will fill with times that have not been reserved. The data is stored in two tables: tblCalendar and tblTime. tblTime contains pkTimeID and times (which are all possible times to select from in half hour intervals). tblCalendar contains a few fields but timeID and date (which is in the format M/d/yyyy) are what I need to test against. timeID is the foreign key of pkTimeID. Basically when the user selects the date, a function gets called that will run a SELECT statement to get the times available. All of this works, I am able to fill the ddl with all times available no matter what the date is or what has already been reserved. I want to check if a time has been already selected based on the date selected by the user and only allow times not selected to be listed. After acheiving this I would like to prevent the immediate time before and immediate time after from being displayed because each reserved time will last for one hour but the data is stored in half hour increments. Any help/suggestions/links will be greatly appreciated. If I need to provide anything else please let me know. Thanks in advance, Brian
Do you have any idea if there is / where can I find web based data entry into SQL 7.0 database. What I'm looking for is something like Oracle Forms but for SQL 7.0.
i am looking for code to show the last entry of a database that has a unique field. for eg.. i have columns AREA, NAME, NUMBER. i need to show the last entry for each unique area. so if there was 5 seperate areas, the table would show the last five entries for each area. anyone help?
I'm a newbie to SQL Server. I would like to practice/learn setting up web based data access. Using SQL Server 2005 and probably a sample database like AdventureWorks, I aim to create a web based interface that will allow for data access and data entry. I'm almost finished with a book about T-SQL, and I am starting to read the MS Implementation and Maintenance book, but where do I start to learn about creating the web interface? What technologies/languages are important? ADO.NET? VB.NET C#.NET?
I have a query that pulls data by date so that I have every day of the month but I would like to group it by month so that I only have one entry per month. Can that be done?
I have been using SQL Server 2K for a couple of months now and I have been entering data into my tables through Enterprise Manager. I do this by selecting the table, right-clicking on it, and selecting Return All Rows.
After months of use, this method of entering data has become tedious and cumbersome. Is there an easier way to enter data into SQL Server? I don't know how to program Visual Basic, but I know how to create dynamic websites.
Microsoft Access offers the ability to make Forms, so that data entry is easier. Can SQL Server offer anything similar? Maybe SQL Server 2005 offers a GUI for data entry?
I am researching ideas for the best way to have users enter data into SQL.
I am familiar with VB and Access Forms and HTML coding but what I am looking for is a way to have a standalone app or website where users can enter information but I want the form to have branches that change depending on user input (such as selecting a meeting type then having specific questions open up related to it).
Any ideas on the best way to do this?
If a different forum would be better for this request please advise and I will move appropriately.
Hi, I want to know the different sources, mediums and ways using which the duplicate recoprds or adta can make an entry in our database tables. I found 4 ways for this from many articles on net that are as follows:
Duplicate data might arrive at your database via an interface to another system Data is loaded into table from other sources because during data loads, the integrity constraints are disabled Merging data from disparate systems Inheriting a poorly designed databaseBut is there any other ways also present????? Please tell me???
I am using SQL Server Management Studio Express for creating my database. I also use the GUI tools for data entry instead of using T-SQL. Whenever I try to enter a value in a field that has a smalldatetime data type, it gives me an error message - "Invalid Value for cell (row 1, column 2).
The changed value in this cell was not recognised as valid. .Net Framework Datatype: Datetime Error Message: Index was outside the bounds of the array. Type a value appropriate for this data type or press ESC to cancel the change."
Now I have tried entering all different combinations in which one can enter a date or a time or both, including in the format I have specified in the windows regional settings, but I always get the same error message.
My other thread containg this same topic seems to have some error. It doesn't show up in the main 'SQL Server Database Engine' group at all. So I had to start a new thread instead.
Here's the link to the original - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1136124&SiteID=1
Here are the contents of the same -
Post#1
Orginally posted by me -
Hi,
I am using SQL Server Management Studio Express for creating my database. I also use the GUI tools for data entry instead of using T-SQL. Whenever I try to enter a value in a field that has a smalldatetime data type, it gives me an error message - "Invalid Value for cell (row 1, column 2).
The changed value in this cell was not recognised as valid. .Net Framework Datatype: Datetime Error Message: Index was outside the bounds of the array. Type a value appropriate for this data type or press ESC to cancel the change."
Now I have tried entering all different combinations in which one can enter a date or a time or both, including in the format I have specified in the windows regional settings, but I always get the same error message.
How do I input data into the field?
Post#2
Originally posted by Jens K. Suessmeyer -
Hi,
you are using a format SQL Serve ri snot expecting. Which User language did you configured for the accessing user and which date are you trying to insert ? HTH, Jens K. Suessmeyer.
--- http://www.sqlserver2005.de ---
Post#3
Originally posted by me -
Hi,
I use only English as the default language for all programs, OS included. The date in question is not just one particular date, it is any date or time value, and I've been facing this issue ever since I started using SQL Server Express a year ago. Only I haven't used it much since, and need to seriously develop something now, that I bothered to ask the question here.
Some examples of the values I tried entering yesterday, and none of them worked. (I got the same error message for each value) -
1-1-2007
01-01-2007
01/01/2007
01,01,2007
01:01:2007
Jan 01, 2007 (this is the format I have specified for short date in the Win regional settings - MMM dd, yyyy)
I even tried entering time alongside with all those above figures in the format -
11:35 PM
11:35 AM
23:35
The only time value(s) I didn't try was/were - hh:mms tt - which is the time format specified in my Win regional settings, neither standalone, nor with the date values.
I also tried entering a time value standalone, without the date. Still no go.
(Also, as I have gleaned from previous posts, if all goes well and SQL Server accepts your data, then if you enter just a date value in a datetime field, then the field automatically gets populated with the value of the system time at that moment, and if you enter just a standalone time value, then the date part will be filled by the system date value on the date of the entry. Am I correct so far?)
Now I'm in a real fix because of the inability to enter date/time values.
Could you please help me out?
Post#6
Originally posted by me -
I don't understand. I can enter the datetime values in all the above mentioned combinations if I use an Insert or Update statement using T-SQL, but I can't seem to enter data in the datetime/smalldatetime fields at all if I try to use the GUI of Management Studio Express to enter data. (right click the table, select show table, and the grid view pops up). Ditto for using GUI tools of Visual Studio Express. Is this a bug in the Visual Studio (Express) software?
Also, my other concerns are, once I develop a front-end for data entry using VB, will I face the same issues with data entry in the datetime fields using the GUI of the front end? I can't test that right now, because I'm still learning VB, and cannot create the front end just yet.
Post#7
Originally posted by me this afternoon, but it never showed up on the page -
Alright, I have done a complete reinstall of Win XP, and have also reinstalled SQL Server Express. Prior to this, I had SQLExpress SP1, but now I have directly installed SP2.
Now I continue to face the same issue. SQL Server will not accept any value for any datetime field, unless it is entered as an SQL insert statement. It won't accept the value entered in the exact same format as the insert statement from the GUI mode of Management Studio Express, nor will it take any values from any GUI developed using VBExpress and the fill dataset method. It throws an error everytime. I don't know any other way of databinding and updating/inserting using VB at this time.
I am at my wits' end because of this. I ask again, is this a bug in SQL Server Express? If so how do I report it to MS and get my issue resolved? If not, even then how can I solve this problem?
Could someone please help me out? I am stuck and cannot use the product at all, without the datetime field.
In my search results I need to order my data by a particular entry rather than a particular column and then add all the other entries onto the end of the result set. Specifically I'm trying to order my records by a particular location in a city so those entries in that location appear first in the result set and then on the end I want to include all the other locations in that city.
I'm assuming I'll need to do these as separate queries and then use a UNION statement but I'm wondering if there is a better or easier way. Is there, for example, another type of ORDER BY clause that lets me order by a particular entry rather than a column?
Has anyone here been able to incorporate a way of data entry using reporting services. What I would like to see is a single page that not only provides the report but also allows for the entry of data. It would be much cleaner to have both together.
hi i'm thinking of putting 3 texboxes for the user to enter their previous work exp which look something like this: experienceFirst job.textboxSecondjob.textboxThirdjob.textbox i'm kinda confuse on with the database. The 3 tables required means i will hav 3 sqldatasource ....which i didin't quite get it right with the Secondjob table.I try using identity_scope() and @@identity to get the ID from my first table(personel)which is autogenerate number. It works fine with Firstjob table but not secondjob table. Generated error message: (1 row(s) affected) (1 row(s) affected) Msg 547, Level 16, State 0, Line 6 The INSERT statement conflicted with the FOREIGN KEY constraint "Personnel_Secondjob". The conflict occurred in database "test", table "dbo.Personnel", column 'IDPersonnel'. The statement has been terminated. INSERT INTO dbo.Personnel (Name) VALUES ('Jon') insert into Firstjob(Designation, Employer, YearWorking, IDPersonnel) values('Teachier, 'Gam', '7thn', scope_identity()) insert into Secondjob(Designation, Employer, YearWorking, IDPersonnel) values('Musician', 'KKSB', '8thn', scope_identity()) any suggestions....
Hi Guys, I have a request to create a data entry form with validation. The data is in hardcopy and people have to enter data on the screen and then this data should be output to a CSV file, so that I can load that csv file to a table. One of other important requirement is that Data entry person should be able to view the data entered and she should be able to modify them aswell. I.E we should have a form where it should also display the entered data with modifyable feautre. I know some VB, I thought about doing this in VB. Can anyone please SUGGEST ME HOW TO IMPLEMENT THIS or Any sample code?? I really appreciate for your Help and Input. Thanks
We have an asp.net app with about 200 data entry forms. Customers mayenter data into any number of forms. Each form's data is persisted ina corresponding sql table. When data entry is complete, it needs to beprocessed. Here's where the questions start.How can we easily determine in which tables a customer has data and howbest to select that data?We're not opposed to putting all the data in a single table. Thistable would wind up having ~15 million records and constantly have CRUDoperations performed against it by up to 5000 users simultaneously.With sufficient hardware, is this too much to ask of the db?
I'm reading data from a flat file source. If some data gets truncated, i have the option of 'ignoring', 'redirecting' or 'fail component'.
What i'd like to do is, to allow the data to be truncated, but i'd also like to write a log entry so that i can know that a particular rows data has been truncated.
I've tried 'redirecting' the row to a script component (as transformation), but i don't know how to determine if the error is truncation or not, not only that, i can't redirect the row back to the 'original' flow, which is a derived field column.
I am using sql server 2008 r2 on my end. I have created a database named testDB. I have a lot of tables with some log tables in this. some tables have contain lack of records in log table.
So my purpose is that I want to fix the table size of those tables(log tables) and want to move records in other database table placed on another location. So my database has no problem.
is there any way to make such above steps which I want for my database?
Is there already built any such functionality in sql server?
I am using the Web Site Administration Tool with the ASP.NET login controls to create/manage user logins & roles for my site.
I have exported the ASPNETDB.MDF into my SQL Database ready to use with my app. The problem that I'm having is that whenever I add a user, using either the Web Site Administration Tool or the Classes available in the code-behind. The entry is doubled up in the database.
This is not a problem when logging on....however, when it comes to deleting a user it will only take one of the entries out and leave the duplicate in there. So if the administrator has deleted a user from the app and then tried to create another one with the same UserName (Which whomever is well within his/her rights to be able to do), they cannot because the entry which has "stay behind" in the database conflicts with the entry.
Any help on this matter would be greatly apprieciated. If any more info on this matter is required please ask (It was quite hard to try and explain this :-)
I have 14 databases, the last database - 14th one will have lookup tables only. The other 13 databases will have these lookup tables and data tables. At the end of each day I will make updates for lookup tables on 14th database, I want to be able to push the updates to any or some of the 13 databases. Look up tables will have only upto 100 rows, so I am not concerned about the bandwidth. What is the best way to accomplish this.
