Is It Possible To Save Single Date To A Samlldatetime Fields ?
May 29, 2007
Hi,All:
I am using Sql 2000 db to storage my data,and I have a table including a column named "ScanDate" (Type: SmallDateTime),Now
I just want to save the current system date to this column when I save my system data.
when I saved it and I found that column value include the time data,not only date .
So How can I just save date to my samlldatetime typed column ?
thanks in advanced!
View 1 Replies
ADVERTISEMENT
Apr 20, 2008
need help on update from one table to another like this
this is my first table
tb_all_holiday
id
fname
Start_Date
End_Date
val_holiday
111
aaaa
15/03/2008
21/03/2008
1
222
bbbb
02/05/2008
09/05/2008
3
333
cccc
03/04/2008
15/05/2008
4
333
cccc
29/04/2008
07/07/2008
1
444
dddd
01/05/2008
02/05/2008
1
444
dddd
09/05/2008
19/08/2008
1
555
EEE
09/07/2008
09/08/2008
4
666
fff
10/09/2008
12/09/2008
1
this is my second table to insert into !
i need to insert to another table like this
single row for each day from start_date TO END_DATE
check each employee add row for each day
insert all employee one after one
ID fname new_date val_holiday
----------------------------------------------------
111 aaaa 15/03/2008 1
111 aaaa 16/03/2008 1
111 aaaa 18/03/2008 1
111 aaaa 19/03/2008 1
111 aaaa 20/03/2008 1
111 aaaa 21/03/2008 1
222 bbb 02/05/2008 3
222 bbb 03/05/2008 3
222 bbb 04/05/2008 3
222 bbb 05/05/2008 3
222 bbb 06/05/2008 3
222 bbb 07/05/2008 3
222 bbb 08/05/2008 3
222 bbb 09/05/2008 3
333 ccc 03/04/2008 4
333 ccc 04/04/2008 4
......................................................add row for each day
...............................
333 ccc 15/05/2008 4
TNX for help
View 6 Replies
View Related
Apr 20, 2008
question need help
how can i use this code below not for insert
i need it for update another table but only if exist
the link to the code in this FORUM
http://forums.microsoft.com/MSDN/AddPost.aspx?PostID=3208536&SiteID=1&Quote=True
Adam Haines wrote:
GPS,
Since you have such a dependency on dates and date calculations, you should implement a calendar table. A calendar table will make calculation such as this much more simplistic.
Calendar table link http://sqlserver2000.databases.aspfaq.com/why-should-i-consider-using-an-auxiliary-calendar-table.html.
Note the calendar table I use is a little different than this one. The only thing you will need to change is isodate to dt.
Now the code to get the results you need:
Code Snippet
declare @t table(
id int,
fname char(4),
Start_Date datetime,
End_Date datetime,
val_holiday int
)
insert into @t values (111, 'aaaa', '3/15/2008', '03/21/2008', 1 )
insert into @t values (222, 'bbbb', '05/2/2008', '05/9/2008', 3)
insert into @t values (333, 'cccc', '04/3/2008', '05/15/2008', 4)
insert into @t values (333, 'cccc', '04/29/2008', '07/07/2008', 1 )
select id, fname, cal.ISODate, val_holiday
from @t t1
inner join Calendar cal
on cal.isodate >= t1.start_date and
cal.ISODate <= t1.end_date
is possible to do it
TNX
View 4 Replies
View Related
Apr 4, 2014
I have a small project for educational institutuin online examination. But 500 students has to login and save their answers.. Is it possible to have in sql server 2008 for 500 login can access a single database & can save?
View 4 Replies
View Related
Jul 23, 2005
Hello !I'm trying to update one table field with another table searched firstdate record.getting some problem.If anyone have experience similar thing or have any idea about it,please guide.Sample case is given below.Thanks in adv.T.S.Negi--Sample caseDROP TABLE TEST1DROP TABLE TEST2CREATE TABLE TEST1(CUST_CD VARCHAR(10),BOOKING_DATE DATETIME,BOOKPHONE_NO VARCHAR(10))CREATE TABLE TEST2(CUST_CD VARCHAR(10),ENTRY_DATE DATETIME,FIRSTPHONE_NO VARCHAR(10))DELETE FROM TEST1INSERT INTO TEST1 VALUES('C1',GETDATE()+5,'11111111')INSERT INTO TEST1 VALUES('C1',GETDATE()+10,'22222222')INSERT INTO TEST1 VALUES('C1',GETDATE()+15,'44444444')INSERT INTO TEST1 VALUES('C1',GETDATE()+16,'33333333')DELETE FROM TEST2INSERT INTO TEST2 VALUES('C1',GETDATE(),'')INSERT INTO TEST2 VALUES('C1',GETDATE()+2,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+11,'')INSERT INTO TEST2 VALUES('C1',GETDATE()+12,'')--SELECT * FROM TEST1--SELECT * FROM TEST2/*Sample dataTEST1CUST_CD BOOKING_DATE BOOKPHONE_NOC12005-04-08 21:46:47.78011111111C12005-04-13 21:46:47.78022222222C12005-04-18 21:46:47.78044444444C12005-04-19 21:46:47.78033333333TEST2CUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.800C12005-04-05 21:46:47.800C12005-04-14 21:46:47.800C12005-04-15 21:46:47.800DESIRED RESULTCUST_CD ENTRY_DATE FIRSTPHONE_NOC12005-04-03 21:46:47.80011111111C12005-04-05 21:46:47.80011111111C12005-04-14 21:46:47.80044444444C12005-04-15 21:46:47.80044444444*/
View 3 Replies
View Related
Mar 8, 2008
Here with the below query iam binding my gridview with industry name,company name,Plant Name,Group Name related to the IDs in Audit table.Select Aud.Ad_ID_PK,Aud.Audit_Name,Ind.Industry_Name,Cmp.Company_Name,Pla.Plant_Name,Gr.Groups_Name,Aud.Audit_Started_On,Aud.Audit_Scheduledto,Aud.Audit_Created_On from
Industry Ind,
Company Cmp,
Plant Pla,
Groups Gr,
Audits Audwhere Ind.Ind_Id_PK =Aud.Audit_Industry and
Cmp.Cmp_ID_PK =Aud.Audit_Company and
Pla.Pl_ID_PK =Aud.Audit_Plant and
Gr.G_ID_PK =Aud.Audit_Group and
Ad_ID_PK in (select Ad_ID_PK from Audits)
Now i want to edit these names.
when i click on edit in gridview these names will be filled into textboxes and when i change the names it should compare the name with particular tables and should get the Id of that and store in Audits table.
For example:
i have this data in my audits table:
Commercial83312
2
2
2
1
Here Commercial83312 is ID of that Audit and 2,2,2,1 are the Industry,Company,Plant and group Ids for that particular audit.In the front end i can see the names of this particular IDs.
when i edit the industry name in the UI it must check the name with industry table and get the ID of the changed name and store it in audit table.
so the data may be changed in audits table as :
Commercial83312
4
2
2
1
so here the industry ID is changed
I need the stored procedure for this.
please help me,its very urgent...
View 4 Replies
View Related
Nov 11, 2007
Hi,
I'm struggling with this. I'd like to perform a joined query
from two or more tables and take the same field from several
rows of one table into seperate fields of a single row in a new table.
Like this:
table 1
uidunameuloc
1mehere
1methere
2youhere
2 youthere
table 2
uidulocuparam#uparamval
1here1a
1here2b
1here3c
1there1d
1there2e
1there3f
2here1g
2here2h
2here3i
2there1j
2there2k
2there3l
result in table 3
uidunameuloc uparval1 uparval2 uparval3
1mehere a b c
1methere d e f
2youhere g h i
2 youthere j k l
uparam# field in table 2 always the same sequence
Any ideas????
Thanks...
View 2 Replies
View Related
Jun 14, 2006
If I have a database table with the following columns:
ID
Other_ID
Description
And I want to join the two ID fields to one field in another table that contains the following fields:
ID
Name
How would i do that?
Here is some sample data and what I would like returned
TABLE1
ID Other_ID Description
row 1 1 2 Number1
row 2 3 1 Number2
TABLE2
ID Name
row 1 1 John
row 2 2 Bob
row 3 3 Bill
I want to query TABLE1, row 1 so that I pull back the Names for the values stored in the ID and Other_ID fields so that my results are like:
John Bob Number1
The only way around it now is that I store Other_Name in Table1.
Thanks.
View 4 Replies
View Related
Apr 22, 2015
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
View 5 Replies
View Related
Jun 3, 2000
I have a very complex (for me, anyway) data transformation problem.
I've been given a flat-file of physician data from another system which must be automated for entry into the SQL server on a regular basis.
This was no problem until we discovered that several fields (all of which we wanted to use) had multiple pieces of information in them, separated by semicolons.
Well, this didn't seem to be too big of a problem, so I wrote a DTS activeX script to handle it. This is what I originally wrote:
'*******************
Function Transform()
'Declare variables
Dim strOffice
Dim strOfficeNew
Dim cChar
Dim x
Dim y
Dim z
'Scrub values into new rows
strOffice = DTSSource("Col050")
x = 1
y = len(strOffice)
z = 1
While x <= y
cChar = Mid(strOffice, x 1)
If cChar <> ";" Then
strOfficeNew = strOfficeNew & cChar
Else
DTSDestination("Phys_No") = DTSSource("Col001") DTSDestination("Addr_No") = z
DTSDestination("Addr_Office") = strOfficeNew
strOfficeNew = ""
z = z + 1
End If
x = x + 1
Wend
'Insert final record after last semicolon
If strOffice <> "" Then
DTSDestination("Phys_No") = DTSSource("Col001") DTSDestination("Addr_No") = z
DTSDestination("Addr_Office") = strOfficeNew
End If
Transform = DTSTransformStat_OK
End Function
'*********************
This, of course, didn't work. WHat I got was the last part of the parsed data, which for the first record, was the second Address in the field.
I searched around, and found the following script that is supposed to allow multiple rows off of a single row, but I can't seem to merge the two and still get the data out clean.
'**********
Dim nCounter
nCounter = 4
Function Main()
if nCounter > 0 then
Main = DTSTransformStat_SkipFetch
DTSDestination("PatientNumber") = DTSSource("PatientNumber") Select Case nCounter
Case 1
DTSDestination("PhysicianType") = "Admitting" DTSDestination("PhysicianId") = DTSSource
("AdmittingPhysician")
Case 2
DTSDestination("PhysicianType") = "Attending" DTSDestination("PhysicianId") = DTSSource
("AttendingPhysician")
Case 3
DTSDestination("PhysicianType") = "Referring" DTSDestination("PhysicianId") = DTSSource
("ReferringPhysician")
Case 4
DTSDestination("PhysicianType") = "Consulting" DTSDestination("PhysicianId") = DTSSource
("ConsultingPhysician")
End Select
nCounter = nCounter - 1
else
nCounter = 4
Main = DTSTransformStat_SkipInsert
end if
End Function
'**************
I'm not a VB Script expert, so there's probably something very simple that I'm missing here... if someone could point it out, I'd be greatly appreciative.
Jaysen
View 4 Replies
View Related
Dec 14, 2014
How can we create a DB for a single attribute such as ORDER DETAILS, CASH RECEIPT, TAX INVOICE having more than 2 text fields.
Also, in every form attribute such as order id is not present - in order identify the same as a primay key. So, which other attributes or fields can be considered as a primary key.
View 5 Replies
View Related
Sep 20, 2007
Hi
I need to export data to CSV file from Sql Reporting Services.
I am including single quotations in my view to display in SRS for string fields.
After export if we open in Notepad, for string field it is adding multiple quotations.
How to add single quotations for string fields - CSV files,
Please let me know if anybody knows.
Thx
Vijji
View 4 Replies
View Related
Aug 22, 2006
Dear ppl,
I have got 2 datasets D1 & D2 in a Report. How can i differentiate between the fields of these two.
e.g. I got Name field in both the datasets. So when i do =Fields!Name.Value in a textbox the report gives me error
How can i tell the report from which dataset to pick up the field ??
Regards
Nabeel
View 9 Replies
View Related
Apr 3, 2014
While working with a vast variety of support projects, i find a sql design where all the fields in a single form (say about 100 fields which are dump data as they are not related to any reports and searching criteria) are dumped in a sql database column in a XML format. See below an example
<?xml version="1.0" encoding="utf-8"?><FormBuilder><ClientID>0</ClientID><SiteID>0</SiteID><IncidentType></IncidentType><IncidentCategory></IncidentCategory><IncidentSubCategory></IncidentSubCategory><CreatedBy>2</CreatedBy><CreatedOn>Wednesday, April 02, 2014</CreatedOn><ModifiedOn /><ModifiedBy /><Section SectionID="ASD" SectionDisplayName="ASD" ColumnType="1" IsDeleted="0" SectionPosition="1"><SectionField FieldName="Bro" Section="ASD" ModuleID="0" Length="" PickData="" ChkData="" RadioData="" ListData="" FieldType="Text" Checked="false" ColumnType="1" IsDeleted="0" CoulmnOrder="0" FieldID="1" IsPrimary="" IsMandatory="" SystemMandatory="" RowPosition="1" FullRow="" /></Section></FormBuilder>
Just want to know the comments how far is this design feasible.....
What are the pros and cons of such a design...
Where we should use such type of db design where are the fields are dumped in a single column...
View 9 Replies
View Related
Apr 29, 2015
I have the following result set but I want to stack or transpose the 3 fields into a single column. I may add more fields later, but right now I want to know what's the best and simplest way.
Current result set:
TotalAllCustomersOnFile | TotalConsumersWithValidEmail | TotalConsumersWithValidEmailAndOptedIn
2,500 1,750 1,500
Desired result set:
Audience | Totals
----------------------------------------------------
TotalAllCustomersOnFile | 2,500
TotalConsumersWithValidEmail | 1,750
TotalConsumersWithValidEmailAndOptedIn | 1,500
View 3 Replies
View Related
Sep 4, 2007
Hi there
I have loaded a csv file into a table. Some fields within the file contain a varying number (up to 10) of subfields seperated by line feed characters.
It looks sort of like this
Customer No. Payments Dates
111 pay1|pay2|pay3 dat1|dat2|dat3
I created an Unpivot transformation, and I got
Customer No. Description Detail
111 Payments pay1|pay2|pay3
111 Dates dat1|dat2|dat3
After a Derived Column transformation I got
Customer No. Description Line1 Line2 Line3
111 Payments pay1 pay2 pay3
111 Dates dat1 dat2 dat3
But what I really want is to end up with this:
Customer No. Payments Dates
111 pay1 dat1
111 pay2 dat2
111 pay3 dat3
Is there a transformation that will get me there, or do I just need some cunning SQL?
I tried to Pivot my way back to happiness but I couldn't get it to work
View 4 Replies
View Related
Apr 14, 2008
Hi
I'm having two datetime field in my table. One is Call date and another one is Calltime because of some calculations. So I want to save calldate like 4/14/2008 and calltime like 9:30 PM.
Kindly help me.
View 3 Replies
View Related
Feb 28, 2007
Hello. A question please. Can I save only the date in a datetime field ? I don't want the hours.
View 16 Replies
View Related
Aug 20, 2007
I've 2 date fields clidlp,clidlc in my data base table. How do I find the newest dates between the fields? Thanks for your help!
View 1 Replies
View Related
Mar 30, 1999
I would like to save only the time into the datetime field in a table. when I do this, It will save it as "1/1/1900 15:23:00" All I would like to have is the time! Is there a way to update it so that it will only save the time?
Thanks In advance!
/Mike
View 1 Replies
View Related
Mar 21, 2007
Hi all,
I am developing an application for a big office which uses SQL Server 2000.
Apart from my database, on that server, there are two databases by other companies.
The administrator also has access to server but the client only wants him to backup the database.
I have two questions:
1) First of all (if it is possible) I would like to protect my own database from the other companies.
I don't want them to:
see the data in the tables (around 20 tables)
make changes to the stored procedures (more than 100 stored procedures)
be able to backup the database
2) The client will save sensitive data to the database (mainly currency amounts, salaries etc) which he wants to keep hidden.
I am using float type for these fields and I would like to make the data encrypted. I could do it for nvarchar fields but changing these float to nvarchar would be time consuming.
Thanks for your patience reading this!
Would really appreciate some help on any of these
Nicolas
View 4 Replies
View Related
Sep 1, 2015
I wonder if it is possible to run a stored procedure and save the results directly to a file in a predetermined directory
As an example I have created a (simple) stored procedure:
USE CovasCopy
GO
CREATE PROCEDURE spTryOut
(
@LastName as NVARCHAR(50)
, @FirstName AS NVARCHAR(25)
[Code] ....
What I would like to add is a (or more?) lines that save the results in a file (csv/txt/tab?)
The name I would like the file to have is "LastName, FirstName, Date query ran, time (HHMMSS?) query ran"
The directory: D:SQLServerResults
View 9 Replies
View Related
Mar 11, 2006
Hello.
I need an SQL Statement for SQL Server in VB.Net that will return values from a table for parts that are due for maintenance within 1 month.
Select * from Part Where DateNOverhaul <= '" & DateAdd(mm,-1,Date) & "' is not working.
I have been trying various solutions on the web and am getting confused because none seem to work. Please help me.
Thank you.
View 7 Replies
View Related
Jul 23, 2005
Hello !How to save on SQL server a date in this format?dd-mmm-yyyyAlso, I have a web form in ASP.net and I want the users to enter datesonly in the above format. I am going to need to make calculationsbeased on the above.Many Thanks,Marios Koumides
View 2 Replies
View Related
Dec 18, 2007
Im creating a table that links employees to jobs, each employee can only be in one place at once. I have fields for start date and end date. Whats the best way of ensuring an employee cannot be assigned to more than one job at the same time.
Im thinking update/insert trigger that ensure Start Date or End Date being added is NOT >/=existing Start Date and </=existing End Date.
Anyone any better ideas?
Thanks in advance
Alex
View 3 Replies
View Related
Feb 11, 2006
Hello:I didn't find any documentation that notes save point names are casesensitive, but I guess they are...Stored Proc to reproduce:/* START CODE SNIPPET */If Exists (Select * From sysobjects Where Type = 'P' and Name ='TestSaveTran')Drop Procedure dbo.TestSaveTranGoCreate Procedure dbo.TestSaveTranAsBeginDeclare@tranCount int--Transaction HandlingSelect @tranCount = @@TRANCOUNTIf (@tranCount=0)Begin Tran localtranElseSave Tran localtranBegin Try--Simulate Error While ProcessingRAISERROR('Something bad happened', 16, 1)/*If this proc started transaction then commit it,otherwise return and let caller handle transaction*/IF (@tranCount=0)Commit Tran localtranEnd TryBegin Catch--Rollback to save pointRollback Tran LOCALTRAN --<< NOTE case change--Log Error--Reraise ErrorEnd CatchEndGo--Execute Stored ProcExec dbo.TestSaveTran/*Should receive the following message:Cannot roll back LOCALTRAN. No transaction or savepoint of that namewas found.*//* END CODE SNIPPET */What is really strange, if there is a transaction open, then no erroris thrown. So if you execute as so:/* START CODE SNIPPET */Begin Tran--Execute Stored ProcExec dbo.TestSaveTran/* END CODE SNIPPET */There is no "Cannot roll back LOCALTRAN...." message.Questions:1-)Can someone confirm save point names are case sensitve and this isnot happening because of a server setting?2-)Is this a logic error that I am not seeing in the example codeabove?We have changed our code to store the save point name in a variable,which will hopefully mitigate this "problem".Thx.
View 4 Replies
View Related
Nov 29, 2006
I am trying to order two date columns. One Ascending theother Descending. I am using the Orders table of Northwind in SQLServer. No idea why, but it only sorts on the first column I setcriteria on. I think you have to convert it to date as it gets storedas date/time...I triedSELECT TOP 100 PERCENT OrderID, CustomerID, EmployeeID, OrderDate,CONVERT(char(10), RequiredDate, 103) AS RequiredDate,CONVERT(char(10), ShippedDate, 103) AS ShippedDate, ShipVia,Freight, ShipName, ShipAddress, ShipCity, ShipRegionFROM dbo.OrdersORDER BY RequiredDate, ShippedDate DESCBut odd results occuredAny ideas appreciated
View 3 Replies
View Related
Feb 11, 2008
i have two columns in sql which is datetime datatype
fromdate & todate, now i want to display it like fromdate-todate in my front end
select fromdate +'-'+ todate as date from table.
when i use this query , the error is
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Thanks for any help
View 1 Replies
View Related
Dec 27, 2004
hi,
When the autogenerate property of datagrid is set to true, how to perform sorting on date fields.
Example:
SELECT DC_NO AS [Document No],CONVERT(CHAR(10),DC_DT,103) AS [Document Date],
[Name] FROM XYZ
Here we convert the date field to the format "dd/mm/yyyy" so when sorting is done it is done in the format "dd/mm/yyyy". But instead sorting should be done in "yyyy/mm/dd" format.
View 6 Replies
View Related
May 7, 2004
Hi,
I have the following table:
CREATE TABLE [Orders] (
[OrdID] [int] ,
[OrderDate] [datetime] ,
[OrderDateONLY] [datetime],
[OrderDayName] [nvarchar] (15),
[OrderMonth] [nvarchar] (25),
[OrderDayOfMonth] [smallint] NULL ,
[OrderWeekofYear] [smallint] NULL
)
GO
The field OrderDate contains BOTH Date and Time information. What I want to do is populate the fields (in bold above) from the OrderDate field... I have tried all that I could think of but nothing works. The last and the best try that I gave was the {B}following[/B] but that too does not work. Can you PLEASE help. Many thanks in advance:
Insert ORDERS
(OrderDateONLY, OrderDayName, OrderMonth, OrderDayOfMonth, OrderWeekofYear)
select
d, datename (dw, d), datename (mm, d), Year (d), datepart (ww, d)
from
(select convert (char (8), OrderDate, 112)as d
from ORDERS
) as x
View 3 Replies
View Related
Jan 4, 2006
Hello, I am wondering how to select the max date from a database view containing multiple date fields for a particular record. I am rusty at SQL and can't seem to get started. Here's an example of the data:
PRCL_IDPROJ_STRT_DTORD_DT ...
1242/3/20063/5/2006
5206/3/20068/2/2006
6412/31/2005
1872/14/20063/16/2006
I need to be able to compare the max date for each PRCL_ID record ("where prcl_id="). In the example above, prcl_id 124 has a max date of 3/5/2006, and prcl_id 520 has a max date of 8/2/2006, etc. The results of the SQL query should return the PRCL_ID and the max date.
Example query results:
PRCL_ID ORD_DT
124 3/5/2006
Please let me know if you can help or if I can provide more info.
Thanks,
Alexkav
View 6 Replies
View Related
Feb 28, 2006
I am trying to compare two date fields; one is a string and one is a getdate() field. I am trying to get them into the same format so I can compare them. What am I doing wrong??? :eek:
select convert(integer, substring(loc_86, 1, 2)) as tmonth,
convert(integer, substring(loc_86, 3, 2)) as tday,
convert(integer, '20'+right(loc_86, 2)) as tyear,
datepart(month, (dateadd(day, -1, (getdate())))) as ymonth,
datepart(day, (dateadd(day, -1, (getdate())))) as yesterday,
datepart(year, (dateadd(day, -1, (getdate())))) as yyear
from ub_chg_tbl join ubmast_tbl
on (ubmast_tbl.patient_nbr = ub_chg_tbl.patient_nbr)
where tmonth = ymonth and tday = yesterday and ty= yyear
View 13 Replies
View Related
May 7, 2004
Hi,
I have the following table:
CREATE TABLE [Orders] (
[OrdID] [int] ,
[OrderDate] [datetime] ,
[OrderDateONLY] [datetime],
[OrderDayName] [nvarchar] (15),
[OrderMonth] [nvarchar] (25),
[OrderDayOfMonth] [smallint] NULL ,
[OrderWeekofYear] [smallint] NULL
)
GO
The field OrderDate contains BOTH Date and Time information. What I want to do is populate the fields (in bold above) from the OrderDate field... I have tried all that I could think of but nothing works. The last and the best try that I gave was the following but that too does not work. Can you PLEASE help. Many thanks in advance:
Insert ORDERS
(OrderDateONLY, OrderDayName, OrderMonth, OrderDayOfMonth, OrderWeekofYear)
select
d, datename (dw, d), datename (mm, d), Year (d), datepart (ww, d)
from
(select convert (char (8), OrderDate, 112)as d
from ORDERS
) as x
View 7 Replies
View Related