Hi,
I use Vs2008Pro. I can not set the correct margins for different printers.I set top margin to .5in .It works on a printer but doesnt on another one.I created a table for printers and save margin values that work for that specific printer and then load before printing.
So I need to set margin values before printing. I am using LocalReport rdlc files.
Thanks for help.
I have a report where in I have a combination of matrix ,table data regions.
The problem what I am facing is that the data tables don't remain fixed in their position and they tend to move down.
E.g. table 1 and table 2Â are on the same page in design time side by side (right and left)however during the runtime the table1 is pushed down and table2 is at its position .
Now how can I keep them all fixed in their same position. Most of the tables have fixed size rows and some who have high size of rows have been put at the end . What settings we can set?
Hi all,How to set Left,Right,Top Margins for Report at the time of Report Design.
Pls help me.
Hello AllDoes anyone know how can we set the margins (Left and Right margins) of the PDF which we export from the report server for the Sql Reports?
I cleart more hereSuppose I have a created a report using the SQL Reporting Service and then run the report from the report server itself. Here I got the option throuh which I can export report data in PDF format. does any one know how can we change the left and right margins for this PDF. Currently its default margins are very large.
Thanks In advance!!!
Warm Regards
Jitendra Jain09425349593
I am printing my reports from my local report viewr, and the margins are off by just a little bit. It looks like printing shifts the contents of the report 1/8 inch to the right, borking the margins.
Report body is 7" wide
Margins are .75" inch on all sides
Print Preview mode displays the report properly, centered
Output is similarly skewed on all printers (tried 4)
This is using the VS SP1 version of the RS dll's.
However, when I print the report I get it shifted to the right by 1/8 inch. This leaves me with a 7/8" margin on the left, and a 5/8" margin on the right.
Setting the margins to Left: 0.625, Right: 0.875 (5/8&7/8) actually causes it to print centered, so I know it is paying attention. When I do this, the print layout mode shows the contents shifted to the left 1/8", as expected.
I assume that people print using this control, or at least it was tested, so has anyone else seen this or is it a confirmed bug?
//5ive
I believe this is an extension of the problem described here:
http://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=115351
The service pack for Visual Studio has fixed the problem when I print my report from VS, however when I deploy and print my reports from the SSRS website they are still incorrect.
My SSRS server is running SQL 2005 with service pack 2 installed and the 9.00.3152 9333097 Cumulative hotfix package (build 3152) for SQL Server 2005 Service Pack 2 also applied.
I find it hard to believe the problem was fixed in the developer tool but NOT in the client tool?
How can I develop reports when the output from the developer tool is different to the output from the client tool?
For example I specify a box to be 5cm wide, and when printed from visual studio it is 5cm wide, but when printed from the SSRS website it is not 5cm wide!
Thanks.
Hello, I've been trying the suggestions in the link below, and without success.
http://blogs.msdn.com/bwelcker/archive/2005/09/28/474898.aspx
This is supposed to allow us to build a linked report with these properties already set. This post works for a linked report that is already deployed. I want to set the properties on the report as I'm deploying the linked report. The instructions listed don't seem to work, it gives type errors and other related things when I try this approach, has anyone else had any luck doing this?
It says:
Error : rsElementTypeMismatch (The value provided for the PageHeight
field is not valid for its type. It cannot be converted from a string value to
the type that is required.)
What do I do to get around this? I tried changing it to a number, but no luck. I'm trying to do this in rs.exe:
Dim props(7) As [Property]
props(0) = New [Property]
props(0).Name = "Description"
props(1) = New [Property]
props(1).Name = "Hidden"
props(2) = New [Property]
props(2).Name = "PageHeight"
props(3) = New [Property]
props(3).Name = "PageWidth"
props(4) = New [Property]
props(4).Name = "BottomMargin"
props(5) = New [Property]
props(5).Name = "TopMargin"
props(6) = New [Property]
props(6).Name = "LeftMargin"
props(7) = New [Property]
props(7).Name = "RightMargin"
props = RS.GetProperties(basereportpath, props)
RS.CreateLinkedReport(name, parent, basereportpath, props)
Hi,
I am having a Data flow task in For each loop which will gets 100 sourcetable names and 100 target table names...
am having a simpleData flow task which trasferes from OLEDBSource to OLEDBDestination.
I am repeating the Dataflow task which transfers from sourcetablename extracted from for loop to a destination table var.
The problem am gettting is for the first table it is able to transfer correcly because I did mapping for those tables at design time...but for the next coming sourcetable-desttable (which r having different no of cols,datatypes) its giving Validation failed...and...needs to refresh metadata....
is there any way to refresh the metadata of Data flow task (I set the property of OLEDBSource validate external meta to false then also same error is coming)
Thanks
Radhika
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
View 3 Replies View RelatedHello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated.
I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
The following objects are placed on the Report body of the Report pane of SQL Server 2005 Reporting Services :
<textbox: expression1>
<textbox: expression2>
<table:table1 with at least 30 columns and 30 expressions>
<textbox: string1> - considered as the Title in the Footer section of the report
<texbox:string2> <textbox:expression3>
<textbox:string3> <textbox:expression4>
<textbox:string4> <textbox:expression5>
<textbox:expression6>
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Thanks in advance
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet..
I have tested.. every page break..you'll have a different sheet in your excel export
I need something like this
page 1
Zone
1
2
3
4
5
6
7
7
8
9
..
page 2
Zone
1
2
3
4
5
6
7
7
8
9
..
but an unique sheet in the excel export
Hello,
If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11
Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header.
If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side.
Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew
Hi, I wanted to know that can we access a webpagefrom a store procedure in sql server 2000 like we run a exe file from sql server. Bye.
View 1 Replies View Related
Hi,
I issued this command on Tempdb but it doesnot shrink the file.
dbcc shrinkfile (tempdev_3,1)
go
Messages:
-----------------------------------------------------------------------------------------------------------
DBCC SHRINKFILE: Page 4:11283400 could not be moved because it is a work table page.
-----------------------------------------------------------------------------------------------------------------------------------------------
I have checked that there are no tables associated with any user in tempdb. Any help is appreciated.
Regards,
Razi
How can I print a field that is in the dataset on each page? I added a textbox in the Page Header and use =Fields!ProjectName.value in the value property. I got an error "Fields cannot used in page header and footer."
How can I have the table header shows on each page? Currently if the data goes to the second page, there is no table header.
Thanks.
DanYeung
Hi Team,
When i view the Report from SSRS Report preview Tab it's working fine, But when i deploy that and try to view in the IE
I am seeing the Body background color in between the image and page border of the page footer how to solve that?
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
I have a report with multiple tables. I need to show each tables in different pages. When there is no data for tables/tables , it is coming with the next table which has data. I have given "Add a page break after" option in the tablix but still the tables are coming together when no data available. How can I show it in different page?
View 2 Replies View RelatedI have a report with tablix. when tablix returns no rows Footer is coming all the way up . How to display the footer at the bottom of the page all time.
View 0 Replies View RelatedHow do I add a hard page break in the middle of a two page report? I use Microsoft reports for windows.
View 5 Replies View Related In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
I am running a DBCC SHRINKFILE on "FILE1" of a database (it has fileid = 1)...intent is to remove 70GB of file space:
DBCC SHRINKFILE (N'FILE1' , 400000).
For the SPID that's doing the shrink, In activity monitor you can see:
Waittype: PAGEIOLATCH_EX on resource: 9:3:15411328
(the DB is dbid=9)
But why does it need a page from fileid=3? Are there page dependencies between files that prevent moving a page within a given file? Does it need that fileid3 page to come along?
Its just sitting there in the SUSPENDED state for the last hour....I am going to leave it another 5 hours or so before cancelling.
The dm_exec_requests has an estimated percent complete at 83% and holding....not sure if I can believe that.
Hi all
I have a problem which I am really struggling with. I have a report that normally spreads over three pages. We have a list setup so that for each customer it picks up fees and expenses and displays it in sections. We have a page break after FEES so that expenses start on a new page. FEES and expenses are tables.
We need to have a page footer set for the bottom of the report but to appear on the first page only per customer. I.e. we do not want it showing on the EXPENSE pages. We have played with the IIF command but can not seem to print htis per customer only by using global variables.
=IIf(Globals!PageNumber=1,"(Please note 30 day invoice period)
The example above however only prints on the first page of the entire report. So if three customers appear then this will only appear for the first customer and I have a feeling I may not be able to link this to list.
If I can not use a page break and enter this into the list then I have a problem with the text field moving up and down depending on the size of the FEE section. For example if 5 fees are brought back then the text field will be lower then a customer that has only 2 fees.
I after a solution that can either allow my page fotter to appear every time a new customer appears on a page and hiddern for the sub sheets. Or the ability to allow my text field to start at a fixed position on my report. Has anyone had a similar issue.
thank you
Michael
Hi:
I made a report that is 10 pages long. I like to show all the data in one page (after deployment). Any idea if this is possible?
Hi - I am pretty new to Reporting Services. I need to create a report where a single result row from the Select Statement populates an entire page of data. The regular grid or Matrix reports don't fit this need. Is there a simple way to do this?
Thanks - Dave
Is it possible to force the content of the page footer to always display at the bottom of a report? I have a report that shows customer orders. It has its interactive height set to 5 inches. There is one customer order per report page. Most of the reports don't require 5 vertical inches (but some do).
How can I make sure that the stuff in the page footer (date, page number, etc.) always gets rendered in the same position for each report? Currently, the page footer follows the last detail line so the footer information sometimes is only midway down the report page.
Thanks.
BCB
Hi
I would like to know if there is some way to find a row in a table by the RID that sp_lock returns :
for example
"SELECT * FROM Authors (UPDLOCK) WHERE name = 'John'"
sp_lock returns the locked row id :
2:328:11 (file#page#slot on page)
How do i get this row???
Thanks
PB
hi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
can u please help me out from this problem??
can i use 'page number' and 'total pages' outside the page header and page footer?
View 1 Replies View RelatedI think I know the answer but I have a report that is supposed to print in Ledger. It has a header that has report information on the left and on the right has page count and date run. When the user resizes the page to letter, only the first part of the header shows (left piece with report information). Instead of resizing the header it seems it truncates it. Is there a way to resize it. If I move the right side over it looks centered on the Ledger size.
View 1 Replies View RelatedI want to show more records in each page when i view report
Question is subject above
any idea? thanks