Is Replication Without Network Connection But File-based Possible?
May 9, 2006
Hello,
I've been looking around in several SQL-Forums and in SQL Books Online but haven't found clear suggestions how to tackle my problem:
Our company has to fill a database with documentation for our contractor. Our subcontractors have to supply information from their branch/craft into this database, too.
Replication (without determining a type at this time) would do fine for data-exchange between us and our subcontractors.
But for working in different companies the networks are not connected
and in some companies/departments connection to the Internet is prohibited at all.
This would result in data-exchange based on files - which wont be a problem as data needs to be updated/exchanged only once a week and is usually done at meetings using DVD-Rs.
scenario in short:
- two-way exchange of data between SQL servers being not connected
- update needed once a week
- our server: SQL Server 2005 Standard (preferred)
- servers of our subcontractors: SQL Server Express 2005 (preferred)
That's the point where I dont know how to proceed:
Is two-way replication based on files possible at all?
I read about Snapshots, but to my understanding this replaces the "whole database" without caring about changes made to it and that's why it wont work for two-way exchange.
I would appreciate your hints how to solve this problem in general or whether I should look out for other solutions - MS Access might work with restrictions - but I would prefer SQL Server.
Thanks for reading until here and in advance for your answers.
Regards,
Michael__H
View 6 Replies
ADVERTISEMENT
Jun 19, 2007
SQL Agent will not successfully execute my package as a job. Bids executes the package correctly as well as when I run the package manually (right click, run package) through SQL Server Management Studio. This is a permissions issue with the flat file any help will be much appreciated.Background Information:OS: SQL 2005 on Windows Server 2003Flat File Connection: \servernamefolderfile.txt (If I change the flat file location to a local file the package will run as a job successfully)Domain: The package is running on a Windows machine that is not on any domain. The network location is a Windows machine on a domain.Security: The network location folder (\servernamefolderfile.txt) has no security, namely anyone can access any file to read/write/delete/etc. I can manually add and delete files as well as add and delete files when the package runs through BIDS or when I manually run it through management studio.Permissions: I have created a login, security credential, and proxy which I am using to run the package. The security credential is tied to the Administrator account on the local machine.
Error Message: Executed as user: COMPUTER-NAMEAdministrator. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:05:37 PM Error: 2007-06-19 12:05:39.25 Code: 0xC001401E Source: DataTransfer Connection manager "FILECONNECTION.FileConnection" Description: The file name "\servernamefolderflatfile.txt" specified in the connection was not valid. End Error Error: 2007-06-19 12:05:39.25 Code: 0xC001401D Source: DataTransfer Description: Connection "FILECONNECTION.FileConnection" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:05:37 PM Finished: 12:05:40 PM Elapsed: 2.297 seconds. The package execution failed. The step failed.
(note: I replaced the fileconnection strings with FILECONNECTION and the serverpath with "servernamefolder" for privacy reasons.
Any help would be greatly appreciated. This is some sort of security issue with SQL Agent. But, the error claims that the user is running as localmachineAdministrator. Isn't this how the package would run if I manually execute it?
View 3 Replies
View Related
Feb 22, 2007
Hi
In the "Choosing Between SQL Server 2005 Compact Edition and SQL Server 2005 Express Edition" white paper, i can read that: "SQL Server 2005 Compact Edition support data file storage on a network share" and "Number of concurrent connections = 256"
But when i try to connect with two different PC at the same time to a .sdf file store on a network share, i have an error message : "File is locked by an other processus"
The firsth PC is connected but the secondth can't
";Mode=Read Write" in the connection string don't change anything.
anybody have an idea ?
View 3 Replies
View Related
Mar 25, 2006
Hi,
This might be obvious - but if so I've missed it so far.
Is it possible to connect remotely to an Express database used in a website which is created in the App_Data folder by VWDEE 2005 and attached by filename?
As far as I can tell these databases don't have a name and aren't mounted until an attempt is made to access them. I certainly can't see any sign of it in SQL Management Studio.
Thanks,
Dale
View 3 Replies
View Related
May 6, 2015
I have implemented a package to load multiple files to a destination. Since the source was a txt file, i have created as flat file source. However now we are getting files in excel format as well.
Is there anyway the source gets changed dynamically based on the file extension, output of the foreach file enumerator? I can think one solution to have 2 dataflow tasks based on precedence constraining and expression one is for .txt and other one is for .xls.
View 6 Replies
View Related
Apr 2, 2008
Let me set the stage of my testbed configuration: On Windows XP SP2, my default connection to the Internet is via wireless express card modem using EV-DO via Verizon Wireless. Let's call this connection A. I also have a traditional wireless network connection (802.11g) that is always enabled. Let's call this connection B. Connection A is always connected during normal business hours. Connection B is not and is often searching for a wireless network to connect to when nothing is in range.
Yesterday, connection B was continuously trying to connect to a wireless network not under my control, meaning that the connection was never established and notification messages continually popped up to complain of this fact. Over time, I've learned to ignore these messages and go on doing my daily work without much thought of the possible implications.
Then, things started to get odd. I was running our application, WebWatchBot, to perform some simple tests of various websites and servers, when I started to get messages from the application that database connectivity was lost, which is a message that pops up to inform the user that the connection is forcibly dropped by SQL Server. After a few moments, the connection to the database was re-established and the message went away. Since I was actually working with SQL Server, I thought it was an anomoly, so I continued on. Then, it happened again. And again. Then, I noticed that the "database connectivity lost" message started to coincide with the wireless connection's (connection B) inability to connect with a wireless network.
Why would this be happening? The database and application are on the same exact computer. The connection to the database is via ODBC drivers over tcp/ip, but why would connection B affect this?
Some added information that may prove useful:
Client side:
What is the connection string in you app or DSN? (please specify)
DRIVER=SQL Server;SERVER=HIGHNOTEWEBWATCHBOT;Database=WebWatchBot;UID=sa;PWD=*****
If client fails to connect, what is the client error messages? (please specify)
[Microsoft][ODBC SQL Server Driver]Communication link failure
Is the client remote or local to the SQL server machine? [Remote | Local]
Can you ping your server? [YES | NO ]
In cmd.exe console, type €œping -a <server_name>€?.
Can you telnet to your SQL Server? [YES | NO, please specify the error message ]
In cmd.exe console, type €œtelnet <server name> port, where port can be 135, 445 or sql_server_tcp_port. If your cmd.exe console turns into a complete black screen with a cursor flushing on top left corner, you are connected. Type ctrl+€™[€˜ to bring up telnet prompt and type €œquit€? <enter>.
What is your client database provider? [SNAC | MDAC | ADO.NET1.0 | ADO.NET2.0| other (please specify] Or/And, what is your client application? [SQL Management Studio | SQL Profiler | Visual Studio | Other (please specify): WebWatchBot - Website and Server Monitoring Software
Is your client computer in the same domain as the Server computer? (Same domain | Different domains | WorkGroup)
What protocol the client enabled? [Shared Memory | TCPIP | Named Pipes].
Do you have aliases configured that match the server name portion of your connection string? NO
Do you select force encryption on server and/or client? NO
[2] Server side:
What is the MS SQL version? [ SQL Server 2005 | SQL Sever 2005 ]
What is the SKU of MS SQL? [Enterprise | Standard | Workgroup | Express (or MSDE) | other (please specify)].
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
What is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named Pipes ]. Use SQL Server Configuration Manager to configure it and check ERRORLOG or event log to confirm.
Does the server start successfully? [YES | NO] If not what is the error messages in the SQL server ERRORLOG?
If SQL Server is a named instance, is the SQL browser enabled? [YES | NO]
What is the account that the SQL Server is running under?[Local System | Network Service | Domain Account]
Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? [YES | NO | not applicable]
Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance.[YES | NO | not applicable ]
[2a] Tool Used to Connect
What tool or Application are you using to connect to SQL Server (eg: Visual Studio, SQL Server Management Studio, SQLCmd.exe, OSQL, etc) and especially the version of SQL Server (Express, Workgroup, Standard, Enterprise, Developer)
[3] Platform:
What is the OS version? [Windows XPSP2 | Windows 2003 | Windows 2000 | Windows 98 | others (please specify ) ].
Do you have third party antivirus, anti-spareware software installed? [Symantec | Norton | other (please specify)].
View 4 Replies
View Related
Feb 28, 2007
Can I use Reporting Services 2005 in a workgroup to serve reports for a windows application which is distributed accross the network?
I've already tried but when the application on a client pc requested a report from the report server i got a message about not having enough permissions to see the report. The windows application was builded using VB .NET 2.0 and VS2005.
The report server instance is installed on a server 2003 enterprise along with the SQL Server 2005.
If this is possible how can set permisions or make my application to be able to requests and show reports?
Thanks a lot to anybody who takes the time to answer.
Antonio Alfaro
View 1 Replies
View Related
Jun 8, 2007
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
View 1 Replies
View Related
Apr 6, 2015
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me  error " cannot open data file" ...
Nothing is wrong with package.
View 10 Replies
View Related
Aug 25, 2004
What happens when Network Connectivity between Distributor & Subscriber
fails in Transactional Replication ??
Thanks,
John
View 2 Replies
View Related
Nov 19, 2007
I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.
Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.
More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.
Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"
What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.
Would appreciate any suggestions or tips. Thanks.
View 1 Replies
View Related
Apr 12, 2007
I am new to SSIS but this does not seem like it should be a hard thing to do. Here is the background:
Windows Server 2003
SQL Server 2005
SSIS
Logged in to server as Admin
I've created a SSIS package that I want to run as a Job. In it there is a Ole DB Connection to a VFP Database on a Novell Server. Client for Netware Services is started when server is but NOT logged into. When I created the package everything runs fine. Note that I had to login when I created the Data Link. I can even run it from the SQL Server Package Store. As soon as I restart the server and try to run it I get an error that the file path is invalid in both SSIS and the Package Store. I check the connection string and it looks good.
The connection is availible in My Network Places
If I open the connection and login it runs fine again.
How do I intiate the network connection and then close it again??
Cory Bonallo
Retail Services
Developer
View 20 Replies
View Related
Jul 2, 2007
hi
i added 2 databases to my SQL server on a machine next door using Microsoft SQL server management studio express... I made sure that the server allows remote connection
then from this computer i pass a connection string to my SQLCLient in VB2005 that looks a bit like this
Code: ( text )
ConnString = "Server=USER-PTDH8Z5ESHSQLEXPRESS;Database=FSS.MDB;Trusted_Con nection=True;User Instance=True"
for which it gives me this error when i open the connection
SQLConnecton.Open()
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Att emptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Log inNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.Creat ePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateOb ject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCrea teRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConne ction(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Flying_School_Scheduler.DBEngine.StartConnection() in
whats the big idea?
i'm in a bit of a tight schedule here... can anyone help me here? ??
View 3 Replies
View Related
Aug 3, 2007
We have a SQL2000 database (Publisher) replicating inserts and updates across a 10Mb link to a SQL 2005 database (Subscriber). The Publisher has two tables we are interested in, 1 with 50 columns and 1 with 15. Both tables have 6 insert/update triggers that fire when a change is made to update columns on the publisher database.
We have set up a pull transactional replication from the Subscriber to occur against the Publisher every minute. We have limited the subscription/replication configuration to Publsih 6 columns from table 1 and 4 from table 2. Any change occuring on any other columns in the Publisher are of no interest. The SQL 2005 database has a trigger on table 1 and table 2 to insert values into a third table. There are around 7,000 insert/updates on table 1 and 28,000 on table 2 per day. All fields in the tables are text.
We are seeing "excessive" network traffic occuring of approximately 1MB per minute (approx 2GB per 24 hrs). We also see that the Distributor databases are getting very large -- upto around 30GB and growing until they get culled. We have reduced the culling intrval from 72 hrs to 24 hours to reduce the size.
Does anyone have any suggestions as to how this "excessive" network traffic can be minimised and how the distributor database size can be minimised. I think that maybe they are both related?
Thanks,
Geoff
WA POLICE
View 5 Replies
View Related
Jun 26, 2007
I am thinking I must be doing something wrong..
I have dozens of packages that work as follows (high level... not listing all the steps just those relevant to this question)
- Get list of files in directory
- Join list to list of already imported files
- Those not imported put into an ADO.Net object
- Loop through ADO.Net record (which contains the filename) and import each file.
I just set the connection string of the flat file to be the variable in the loop (expressions.. connection string). Pretty standard stuff. Now I tried to do the same with a file connection (not a flat file) becuase I have a source that is from a mainframe and I had to write a custom source script and its not working. Basically the source script uses
oRead = oFile.OpenText(Me.Connections.FileConnection.ConnectionString)
And it opens the same file over and over (not ever changing as the ConnectionString expression changes like it does for flat files) and imports it even though I have verified the loop is correctly looping through all the different files.
Any thoughts as to what I am doing wrong?
View 3 Replies
View Related
Sep 27, 2007
This has to be an easy question.
WORK2 - My workstation (xp pro)
WORK3 - Location of SQL Express 2005
WORK3COMPANY
sa,password
WORK3 is a XPPro, both WORK2 and 3 have full admin rights to their machines and the network, I am using SQL Authentication (sa, password)
I have used the SQL Server Config app to enable the 4 Protocols, then restarted service. I can connect locally to my database via "SQL Server Management Studio Express", and through my VB application. I have checked "allow remote connections" in the database properties.
I do not know what i am missing? any thoughts?
Thanks in Advance
View 12 Replies
View Related
Mar 1, 2008
Hi,
We are running a software which has a sql database and it runs a data cycle everyday in which it gets data from several other sql servers on our network.
Recently we have starting receiving the following errors during this run;
Network Error IOException: Connection Timed Out: Connect
It finishes most of the queries in the script, but on some (and not always the same tables) it gives the time out error. I am not quit sure where or how to research this problem.
Any ideas are welcome!
Thanks,
Michiel
View 2 Replies
View Related
Mar 14, 2014
I am running SQL Server 2012 on a VM and am trying to pull data from a network drive (S: or misvnascfs0003).I can import data using the Import Wizard and save the package as an SSIS package. When I try to Run the Package I get The Acquire Connection method call to the connection manager "SourceConnectionExcel" failed with the error...
If I save the file to the VM local drive the SSIS package run fine.When I log into SSIS through SSMS i have to run as "Administrator".
View 2 Replies
View Related
Mar 27, 2008
When using my Work laptop while at home, how can I log into an SQLServer Express 2005 database on a home server, using Windows Authentication, without having to VPN in and log onto the network at Work? If I VPN into work then I can connect to my home db just fine.
I have a laptop which I carry from work to home each day. I'm a Domain Admin at work so my network login name is DOMAINjoe. At home I have 5 PCs in a home network, WorkGroup is WORKGROUP. When I carry my laptop home I log in exactly as I do at work. All is fine. File sharing, printer sharing, & internet all work between my 5 PCs.
I installed SQLServer Express 2005 on a home PC I use as a server (Vista Business edition). Home server's name is STAR. I developed a database called AddressBk on my laptop (Visual Studio 2008) using my laptop's local copy of SQLServerExpress. App works fine. I copied the Db files onto my home server STAR. My user name on STAR is Joe2, so while logged onto Star as Joe2 I used Star's SQLServer Management Studio Express to connect the AddressBk db to Star's copy of SQLServer Express. All is fine.
Now if I use my LapTop on my home network and try to connect to AddressBk on STAR I get a connection error. I get the error whether connecting using SQLServer Management Studio Express or using Visual Studio 2008. The SQLServer Management Studio Express connection screen shows I'm connecting using Windows Authentication and my User Name is DOMAINjoe. I presume this is the problem as I can not add a user on Star with a Domain Name. Other PCs on my home network can connect to AddressBk db on Star without a problem. If my labtop VPNs into work then I can connect just fine.
Here is the connection string my App uses.
Data Source=STARSQLEXPRESS;Initial Catalog=AddressBk;Integrated Security=True;connection timeout=60
How can I connect to my db without having to VPN into work?
Thanks for any help.
Joe A
View 2 Replies
View Related
Nov 26, 2006
We have a SQL 2005
clustered server (Microsoft Cluster Services) that is queried from 4 IIS6
Windows Server 2003 frontends. Each frontend runs both classic ASP apps
connection with SQL Server ODBC and .NET2 apps connecting with
System.Data.SqlClient. Ocassionaly we get a string of errors/timeouts opening a
connection lasting maybe 2 minutes.
One the classic ASP
apps we log one of these two errors:
Microsoft OLE DB Provider for ODBC
Drivers (0x80004005)
[Microsoft][ODBC SQL Server
Driver][DBNETLIB]General network error. Check your network
documentation
or
Microsoft OLE DB Provider for
ODBC Drivers (0x80004005)
[Microsoft][ODBC SQL Server
Driver]Timeout expired
on the
ADODB.Connection.Open
On the .NET2 apps we
log
Message Timeout expired. The timeout
period elapsed prior to completion of the operation or the server is not
responding.
StackTrace at
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection
owningObject)
at
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection
owningConnection)
at
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection
outerConnection, DbConnectionFactory connectionFactory)
at
System.Data.SqlClient.SqlConnection.Open()
at
System.Web.SessionState.SqlSessionStateStore.SqlStateConnection..ctor(SqlPartitionInfo
sqlPartitionInfo)
Source .Net SqlClient Data Provider
Any ideas for further debugging?
View 11 Replies
View Related
Apr 9, 2008
hi
i am working with Asp.net2.0,Sqlserver2000.
i uploaded my developed application to the webserver.
all webpages are opening..bt when i try to interact with database it is raising error as following..
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
i set Enamble to namedPipes,Tcp/IP
i set Remote connection to enable
my web.config looks like this..
<?xml version="1.0"?>
<configuration> <appSettings>
<add key="cn" value="User ID=redot;Password=redot;Data Source=216.185.43.148:1423;Initial Catalog=redot" /> <!--<remove key="LocalSqlServer"/> ;ProviderName=System.Data.SqlClient-->
</appSettings> <connectionStrings> <!--<remove name="LocalSqlServer"/>-->
<add name="redotConnectionString" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString1" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString2" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString3" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString4" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString5" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString6" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString7" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString8" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString9" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString10" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web>
<sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=216.185.43.148:1423;User ID=redot;Password=redot;Trusted_Connection=True" cookieless="false" timeout="60" />
<compilation debug="true" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. -->
<customErrors mode="Off"> <error statusCode="404" redirect="filenotfound.htm" /> </customErrors>
</system.web> <system.net>
<mailSettings>
<smtp> <network host="216.185.54.55" port="25" /> </smtp> </mailSettings>
</system.net></configuration>
i will be very thankful ,if anyone help me to resolve this problem..
pls..its urgent for me
Thanks& Regards
Shobha
View 1 Replies
View Related
Nov 13, 2001
I am connecting a access database to SQL Server and lately I have been getting this error every once in a while. Any idea why?
View 1 Replies
View Related
Sep 27, 2007
Hi,
I have installed SQL server 2005 in my machine. Now when we restore the database, I have check the size of database file .mdf/.ldf is very large. So now I wants to place these two files in any other machine in network.
But when I try to do the same, I am getting "Error 5110: network device not supported for database files.".
Please anyone guide me about the process. So that I can place these 2 files in another machine in network or any sharepoint.
Thanks
Regards,
Nipun
View 4 Replies
View Related
May 27, 2015
I need to move specific files from a server to another server on a monthly basis. Â There are hundreds of files that are in the source directory and I need to move approximately 40 of those to the destination server. Â I would like to easily add or delete the file list as needed. Â I have seen where several variables were created for for each file name (and one for the path) and the ForEach Loop would go through them. Â With 40 or more I was thinking that I could make a connection to an Excel spreadsheet or text file with a record for each file name and read in and and move to the next record and make that value become the content of a "FileName" variable. Â Then if I wanted to add another file name I could just add another record to spreadsheet/text file or remove and the package would handle automatically....
View 10 Replies
View Related
May 6, 2015
I have a task for which I have to load csv file from a shared directory into sql table. Right now I'm stuck with a road blocker, The issue is the shared drive contains all the history files as well and I have to pick only the latest file. But I cannot identify latest file based on the file name because it doesn't contain any date in the file name. However by seeing file properties I can pull latest file.Â
Sample file name:Â XXX_XXX_XXX_XXX_XXX-5814201.csv
Is there any way we can automate this in SSIS with file properties and picking the latest one?
View 12 Replies
View Related
Nov 5, 2006
Hy everyone,
I have a problem at pulling data on PDA using Sql Mobile 5 from Sql Server 2000.
It work s for most tables, except for two . Every table of those two has about 1000 records and every record about 150 bytes, so all data is about 150 kbytes.
When I connect to the Sql Server 2000 through LAN, no problem. But when I connect through GPRS - VPN, the error occurs. But, the PDA- phone connection is via Bluetooth and at ping no TimeOut appears, the replies are about 600-700 ms. When connecting with a desktop computer through GPRS no such problem occurs.
So , I don't know what could be the cause: the connection or the Sql Mobile which doesn't retry enough in case of error to transfer all data .
A specialist from the GPRS provider told me to use 3G phone , but , because the GPRS phones have already been bought, this would be a too big investment. So, I don't think this is a good idea in this moment .
I found similar problem on the net and a solution was to use Pooling = False. But , in Sql Mobile there is no pulling parameter available when making the connection string .
Any help is very precious to me ,
Mihai .
View 10 Replies
View Related
Dec 29, 2006
Hi,
I would appreciate any thoughts/ideas on the following use case for the distributed service broker application we plan to migrate from our existing proprietary tcp based message protocol using database tables for reliability.
There are two ssb services running in separate sql server instances, each on a different server machine. For simplicity, let us assume the ssb endpoint names are SSBA, SSBB. SSBB is the Initiator of the Dialog while SSBA is the Target. Now the requirement is that if the underlying network communication between the two ssb endpoints(SSBA and SSBB) is broken or if the critical service SSBB is down, then processing of any incoming message into SSBA's queue from a third service broker service (say SSBEXPR) running within a SqlExpress instance should be delayed until SSBB is alive and network communication between SSBA and SSBB is established. In our existing implementation (wherein SSBA, SSBB and SSBEXPR are windows services) we use a combination of TCP socket disconnects and Heartbeat messages between SSBA and SSBB to determine the health of network connection and that of the SSBB service.
Now my understanding of how the underlying network connection for a ssb dialog works is that if there is no activity on a dialog for a certain amount of time then the underlying network connection is closed. Is there a way to specify the amount of time to say infinite value or something and thus change this behavior? My other question is how can one query the underlying network connection (i.e. a row from sys.dm_broker_connections) associated with a particular conversation? If none of this is possible, then any other patterns/ideas/approach is welcome.
Thanks,
View 8 Replies
View Related
Aug 25, 2006
Is there an INF file or a registry entry for the client network utility that I can move from machine to machine? I hate having to re-enter all of my SQL servers and alias' every time I install Tools on a new machine...Any help is greatly appreciated!!
View 1 Replies
View Related
Oct 25, 2006
Hi,
How can I read a file placed in a shared folder on a network from MS SQL Server Stored Procedure.
Thanks.
View 1 Replies
View Related
Oct 25, 2006
Hi,
How can I read a file placed in a shared folder on a network from MS SQL Server Stored Procedure. Is there any kind of set-up I have to do. Can someone please help I am very new SQL Server stuff.
Thanks.
View 4 Replies
View Related
Apr 25, 2007
Hello,
I have Sql Server in one pc and I want to attach one databse that is in another computer that doesnt have SQL Server. Sql Server doesnt permit UNC path when attaching database files. Is there anyway to workarounf this. Is Trace Flag 1807 of any use?
Thanks
View 3 Replies
View Related
Jul 20, 2005
Hi All,I have a requirement to create the database with data and log files ina different machine on the network.Googling, I got a link which said Mapped drives do not work but UNC pathswork. However in my case, both are failing.Any advices or links on net will be highly useful.Thanks and Regards,Chandra Mohan
View 5 Replies
View Related
Nov 29, 2007
I know , it is not going to work , just wondering if anyone could give any reasons for that. Whether it was intentional constraint or just internally compact edition was designed in particular way which makes such a usage not possible. It is a pity that it doesn't work that way as it would be much easier transitional path for many Visual Foxpro , MS Access applications.
In my case I just want READ-ONLY database either for multi-user access via shared drive or stand-alone on local drive.
View 1 Replies
View Related
